1 capstone design project silent alarm system students: su huang & fenghua chen advisor:...

1

Capstone Design Project

Silent Alarm System

Students: Su Huang & Fenghua Chen

Advisor: Professor James Hedrick

March 03, 2007

2

Current Safety Alert System

Emergency phone booths

Surveillance cameras Wired together

(underground) Connect to Campus

Safety

3

Disadvantages of Current System

Slow notification of incident Surveillance cameras have blind spots Fixed in numbers and locations

4

What is a Silent Alarm System?

A personal safety alert system Mobile device Wireless transmission Easy, silent activation Instant alert to Campus Safety Better location tracking

5

Keychain (student)

Central Station(Campus Safety)

Signal

Signal Signal

Schematic Diagram

Sub.

Substation

Key Chain (Student,

faculty, etc)

6

The Big Picture

www.google.com

7

The Project

Idea by Nelson Rosario Originally based on Parallax Education Board Migration to C8051 MCU platform Develop a communication platform for software

engineers Develop basic communication protocol Built a standalone prototype on a PCB board

8

Design Specifications

Transmit Frequency: 433.92 MHz Transmit Range: 500ft Transmitter Output Power: -4 ~ 8 (dBm) Receiver Output Power: -4 ~ 4 (dBm) Baud Rate: 9600 bps Receiver Sensitivity: -106 ~ -118 (dBm) Meet all FCC and Public Safety regulations

9

Hardware Components Microcontroller (C8051) Parallax RF Transceiver Parallax Education Board Keychain

Key Chain 433MHz Transceiver by All Spectrum Electronics

10

Block Diagram

Transmitter Station Receiver Station

11

Communication Protocol

Transmitter• Check for button

press

• Synchronization Start character

• Message

• End character

• Back to checking

12

Communication Protocol (cont)

Receiver• Wait for start

character

• Getting message

• Wait for stop character

• Send alarm

• Back to wait

13

Communication Protocol (cont)

Start signal: character “!” Message: can take up to as much as 25

ASCII characters Test message: string “IRE” End signal: character “@”

14

Results

Spectrum Analyzer Antenna noise Receiver Sensitivity:

-106 ~ -118 dBm

15

Results

Oscilloscope Message Data (no

transmission) Noise only

16

State Diagram (Receiver#2)

17

LR Receiver and LS Decoder

Linx Technologies®

18

Progress Report

A prototype is built Signal/noise measurements using

Spectrum Analyzer Improving protocol to be more flexible

and noise resistant Building filter circuit

19

Results

Oscilloscope Message Received !,I,R,E,@

20

Results

Xmtrwide With Noise

21

Disadvantages

Wireless signal strength problem False Alarms

• Solutions are: fine, lock, save ID on keychain

Device Failure Inaccurate position detection

22

Future Thoughts

Open Shortest Path First More accurate position detection (i.e.

GPS) Vibration (feedback to user) Individual ID for each transmitter

23

Acknowledgements

Advisor: Professor Hedrick Nelson Rosario

24

Questions?