1 arduino board: arduino uno arduino programing environment: arduino 0022 download @...
Post on 22-Dec-2015
390 Views
Preview:
TRANSCRIPT
1
Arduino Board: Arduino UNO
Arduino Programing Environment: Arduino 0022Download @ http://arduino.cc/en/Main/Software
.
2
*Download Arduino Software from Arduino.cc and unzip the folder to your computer. A file within the folder called Arduino, allows you to launch the programming environment.
*You need to install a driver that comes with Arduino to be able to communicate with the board
Setup Arduino-Install the Arduino Board Drivers that come with Arduino Folder
You can use device manager to install the driver by manually giving the address of this folder
Setup Arduino-Connect Arduino to Computer via USB Port using USB Cable
Let the System Find the New Hardware
To Computer USB Port
Setup Arduino-Setting The Appropriate Arduino Port
Run Arduino, On Arduino Environment go to Tools>BoardCheck the appropriate Board
Setup Arduino-Setting The Appropriate Arduino Port
Run Arduino, On Arduino Environment go to Tools>Serial Ports Check the Port that you just found out is dedicated to USB Serial
Setup Arduino-Making Your First Circuit
Connect an LED to Pin 13 and Ground, Short leg to ground and long leg to Pin 13
To Computer USB Port
Write and Compile and Uploade your First Arduino Code
void setup(){
} pinMode(13,OUTPUT);}void loop(){ digitalWrite(13,LOW); delay(1000); digitalWrite(13,HIGH); delay(1000);
Setup Arduino-Writing Your First Arduino Code
top related