1) all india branches will be divided into four teams i.e. north (delhi + chd) / south (hyd + chn +...

KAUN BANEGA

VIJETA

Rules :

KAUN BANEGA VIJETA

1) All India branches will be divided into four teams i.e. North (Delhi + Chd) / South (Hyd + Chn + Blr) /East (Kol + Gty +Bbr)/West (Mum + Vad + Ngr)

2) Each team will have four playing members, others will not be allowed to answer or help their respective teams.

3) 15 seconds will be given to answer for each question, if

unanswered the same question will be passed on to audience.

4) Each question has tag money, for right answer you will get Rs. 200.00 and for wrong answer Rs. 200.00 will be deducted from your winning amount.

5) Members of Enginnering department & MARCOM will not be part of this Quiz.

Arrange following Instrument’s (code wise) in increasing manner..

KAUN BANEGA VIJETA

2) Liquid Limit Device EO”

3) Pavement Core drilling Machine

4) Jaw Crusher

1) G.A. Pressure meter 1) AIM-040 – Liquid Limit Device

3)AIM-442-1 Jaw Crusher

2) AIM-146 GA pressure

meter

4) AIM-551-1 Pavement Core

Drilling Machine

Q.1 AIMIL is ISO 9001 accredited organization since

KAUN BANEGA VIJETA

1) 1999 2) 2000

3) 2000 4) 2004

Q.2 AIM-025 was developed by CSIR lab ________and licensed to Aimil….

KAUN BANEGA VIJETA

1) CRRI 2) CDRI

3) CBRI 4) CSMRS

Q.3 The CRRI calibration charges of Bump Integrator is

KAUN BANEGA VIJETA

1) 1 lac + Service tax

2) 90,000 + Sales tax

3) 90,000 + Service tax

4) 1 lac + Sales Tax

KAUN BANEGA VIJETA

1) SCPT 2) SPT & DCPT

3) SCPT & DCPT 4) SPT & SCPT

Q. 4 Which tests we can perform with AIM-025

Q.5 Which Instrument can be used in sedimentation analysis of soil….

KAUN BANEGA VIJETA

1) AIM-0552) AIM-046 & AIM-056-1

3) AIM-056-14) AIM-055 & AIM-057

Q.6 Vicat Apparatus is used to determine the

consistency and setting time of….

KAUN BANEGA VIJETA

1) Concrete 2) Lime

3) Cement 4) Cement & Lime

Q.7 Which Instrument is used to conduct accelerated soundness tests on cement…..

KAUN BANEGA VIJETA

1) Le-chat mould 2) Autoclave

3) Shrinkage Bar Mould

4) All of the above

Q.8 How many types of SCC flowability instrument AIMIL sell..

KAUN BANEGA VIJETA

1) Three 2) Four

3) Five 4) Six

Q.9 How many types of Load Truss Aimil sell….

KAUN BANEGA VIJETA

1) FOUR 2) FIVE

3) THREE 4) TWO

Q.10 How many types of CTM, Aimil manufacture

KAUN BANEGA VIJETA

1) FIVE 2) THREE

3) FOUR 4) SEVEN

Q.11 How many moulds Aimil supply with AIM-565-1 Ductility Test Apparatus…….

KAUN BANEGA VIJETA

1) THREE 2) FOUR

3) TWO 4) Its optional…

Q.12 How many “strain rate” available in our AIM-104 Direct Shear Apparatus….

KAUN BANEGA VIJETA

1) Twelve 2) Eighteen

3) Six 4) None of above

Q.13 What is the platen speed range(mm/min.) of AIM-064-E “Load Frame Microprocessor based”

KAUN BANEGA VIJETA

1) 0.00001 to 9.99999

2) 0.000001 to 9.999999

3) 0.001 to 9.999 4) 0.0001 to 9.9999

Q.14 According to IS:10890, High speed of planetary movement of paddle in AIM-412-4 is

KAUN BANEGA VIJETA

1) 140+5 rpm 2) 62+5 rpm

3) 125+5 rpm4) 280+5 rpm

Q.15 The frequency range of AIM-418-2 Vibration machine is

KAUN BANEGA VIJETA

1) 12000+500 rpm 2) 12000+400 rpm

3) 10000+300 rpm 4) 12000+100 rpm

Q.16 What is the rpm of AIM-441 Ball Mill 5 kg

KAUN BANEGA VIJETA

1) 24 2) 30

3) 48 4) 20

Q.17 Proving Ring capacity 2000 kN equals to

KAUN BANEGA VIJETA

1) 2000 kgf 2) 200 kgf

3) 200000 kgf4) None of the above

Q.18 Which capacity of electronic balance is supplied with our AIM-9933…..

KAUN BANEGA VIJETA

1) 15 kg x 0.5 g 2) 15 kg x 0.1 g

3) 15 kg x 1 g 4) 30 kg x 1 g

Q.19 How much weight of rammer is required in Bitumen compactor for Modified Marshall test..

KAUN BANEGA VIJETA

1) 4.5 kg 2) 10.2 kg

3) 4.9 kg 4) 2.6 kg

Q.20 In Asphalt content oven, the bitumen burnt at

KAUN BANEGA VIJETA

1) 640 deg C 2) 525 deg C

3) 538 deg C4) None of the above

Q.21 AIM-344 Cube Mould 150 mm cube is ISI certified against …….

KAUN BANEGA VIJETA

1) IS 14085 2) IS 10086

3) IS 100086 4) IS 10080

Q.22 How much is the volume of AIM-113 Compaction Mould “Heavy” as per ASTM…

KAUN BANEGA VIJETA

1) 3250 mm3 2) 2250 mm3

3) 2124 mm3 4) 2500 mm3

Q.23 How much abrasive charge is supplied with AIM-458-1

KAUN BANEGA VIJETA

1) 10 kg 2) 15 kg

3) 5 kg 4) 20 kg

Q.24 How many drill rods supply with AIM-135 Static Cone Penetrometer”

KAUN BANEGA VIJETA

1) 15 2) 10

3) 30 4) 25

Q. 25 Identify the machine

KAUN BANEGA VIJETA

Q. 26 Identify the machine

KAUN BANEGA VIJETA

Q. 27 Identify this attachment of UTM…..

KAUN BANEGA VIJETA

Q. 28 Identify the machine

KAUN BANEGA VIJETA

Q. 29 Identify the machine

KAUN BANEGA VIJETA

Q. 30 Identify the machine :

KAUN BANEGA VIJETA