1. 2 manufacturers reserve supply maibec industries
Post on 31-Mar-2015
213 Views
Preview:
TRANSCRIPT
11
22
Manufacturers Reserve Supply
Maibec Industries
33
MAINE + QUEBEC
MAI NE + QUE BEC
MAIBEC
What Others Want To Be
44
Maibec IndustriesMaibec Industries
Produces 2 major product groups Produces 2 major product groups distributed by MRSdistributed by MRS
Wood ShinglesWood Shingles Eastern White CedarEastern White Cedar
Solid Wood SidingSolid Wood Siding Eastern Premium Eastern Premium
SpruceSpruce
55
Factory – StainedFactory – StainedSOLID WOOD SIDINGSOLID WOOD SIDING
66
When you want When you want wood,wood, buy buy wood!wood!WOOD…
Natural
Renewable
Sustainable
MAIBEC SIDING…Beautiful
Durable
Low Maintenance
We’ll guarantee it!
77
MAIBEC WOOD SIDING MAIBEC WOOD SIDING SINCE 1986SINCE 1986
Quality Control from Start to FinishQuality Control from Start to Finish SawingSawing Kiln DryingKiln Drying ProfilingProfiling StainingStaining PackagingPackaging ShippingShipping
88
SPF (Spruce-Pine-Fir)SPF (Spruce-Pine-Fir)A DURABLE SUBSTRATEA DURABLE SUBSTRATE
In House Lumber ManufacturingIn House Lumber Manufacturing Maibec premium siding gradeMaibec premium siding grade
Optimal Drying in Specie Specific KilnsOptimal Drying in Specie Specific Kilns Consistent moisture contentConsistent moisture content
99
CHOICES AND MORE CHOICES AND MORE CHOICESCHOICES
Profile Profile DimensionsDimensions 1 x 4, 1 x 6,1 x 4, 1 x 6, 1 x 8, 1 x 1 x 8, 1 x
10, 1/2x610, 1/2x6 Random Lengths Random Lengths
4’ thru 16’4’ thru 16’ 75% 1275% 12' ' to to
1616''
1010
MAIBEC’S got you MAIBEC’S got you coveredcovered
Profile SelectionProfile Selection (smooth or rough face)(smooth or rough face) 1/2x6 Clapboard1/2x6 Clapboard
Unfinished or pre-finished Unfinished or pre-finished with 1 or 2 coatswith 1 or 2 coats
Rabetted BevelRabetted Bevel
1x4, 6 & 8 inch widths1x4, 6 & 8 inch widths
Pre-finished onlyPre-finished only
ShipLap V-JointShipLap V-Joint
1x4, 6 & 8 inch1x4, 6 & 8 inch
Pre-finished onlyPre-finished only
1111
MAIBEC’S got you MAIBEC’S got you coveredcovered
Profile SelectionProfile Selection (smooth or rough face)(smooth or rough face) ChannelChannel
1x6 & 8 inch widths 1x6 & 8 inch widths
Pre-finished onlyPre-finished only
CoveCove1x6 & 8 inch widths1x6 & 8 inch widths
Pre-finished onlyPre-finished only
Board & BattenBoard & Batten1x10 boards and 1x2 battens1x10 boards and 1x2 battens
Pre-finished onlyPre-finished only
1212
PICK A COLOR, ANY PICK A COLOR, ANY COLORCOLOR
Cabot Factory Finish StainCabot Factory Finish Stain Unlimited Choice of ColorsUnlimited Choice of Colors No Minimum OrderNo Minimum Order
Free SamplesFree Samples Flow Coat ApplicationFlow Coat Application Oven DriedOven Dried
The Cabot Factory Finish Process
1 Controlled temperature and humidity levels stabilize any moisture in the wood; application conditions are optimal. 2 The siding is fed into the machine applicator and flooded with Cabot Factory Finish. 3 Pressure rollers spread the coating evenly. 4 High speed brushes drive the stain into all six sides of the wood for maximum protection. Back-priming reduces shrinking and swelling and improves the siding durability. 5 Proper spread rates and uniform colour coverage provide a beautiful finish with the highest outdoor performance standards.
The longevity and performance of any coating is greatly influenced by the method of application. Cabot Factory Finish is applied under factory-controlled conditions and the most stringent quality control procedures are followed. All six sides of the board, including the butt-ends, are completely covered ensuring the ultimate protection from nature’s elements. The stain is then brushed deep into the surface for maxi-mum penetration and is allowed to dry thoroughly prior to leaving the factory, stabilizing the siding and preventing possible shrinkage. The finished siding arrives at the construction site totally protected from exposure to water and sunlight.
2
3
4
1313
PROTECTING YOUR INVESTMENTPROTECTING YOUR INVESTMENT
Superior PackagingSuperior Packaging
8 Pieces per Bundle8 Pieces per Bundle Strapped bundlesStrapped bundles Tally SheetsTally Sheets
Polyurethane Sheet Between Each Siding Polyurethane Sheet Between Each Siding PiecePiece
Paper WrappedPaper Wrapped
1414
TRIMS, MOULDINGS, TRIMS, MOULDINGS, AND NAILSAND NAILS
PRE-FINISHED TRIM PACKAGESPRE-FINISHED TRIM PACKAGES 1 x 6 Fascia Board1 x 6 Fascia Board 5/4 x 4 & 5 - Outside/Inside Corner5/4 x 4 & 5 - Outside/Inside Corner 2 x 2 Inside Corner2 x 2 Inside Corner 5/4 x 7 Skirt Board5/4 x 7 Skirt Board 2 x 4 Universal I/S O/S Corner Board2 x 4 Universal I/S O/S Corner Board Other Trim Items & Sizes AvailableOther Trim Items & Sizes Available
ACCESSORIESACCESSORIES Free Touch UpFree Touch Up Color Matched Maze NailsColor Matched Maze Nails
22“, 2-1/2”“, 2-1/2” and 3 and 3"" Individual Individual 22"" Coil Coil
1515
The Trims
1717
INSTALLATIONINSTALLATIONJoints must be placed on a nailing
strip, angling the two boards with 45º mitre cut. End of boards must land
and be nailed into studs.
Wood nailing strips or Home Slicker* are required for Maibec warranted siding.
*Installation of Home Slicker according to Benjamin Obdyke’s recommendations. Siding must be nailed directly to studs, using
Maibec nails, 16" on center.
1818
Home Slicker™Home Slicker™ by Benjamin Obdykeby Benjamin Obdyke
-1/4” three--1/4” three-dimensional nylon dimensional nylon matrixmatrix
Thermal breakThermal break Channels moisture awayChannels moisture away Class A fire ratingClass A fire rating
Specified by Specified by ArchitectsArchitects
1919
INSTALLATIONINSTALLATION
•Nailing or furring strips need to be installed at a 45º angle. This allows for any moisture build up to flow down the wall.
•The strips need to be installed at 12" on center to ensure a 16" on center nailing pattern on the siding.
VERTICAL SIDING
2020
INSTALLATIONINSTALLATIONNailing
Use 1 nailplaced in themiddle of thebatten every
16" on center.
Channel, Cove, V-Joint
and Rabbeted Bevel
4" AND 6“ SIDINGOne nail
placed at 3/4" to 1" from
the base ofthe board.
8" SIDINGRequires asecond nailplaced 2 ½”from the top.
Use twonails at ¾“to 1“ fromthe edges
of the Board.
Board and Batten
2121
INSTALLATIONINSTALLATIONEndcaps on Siding Bundles with Endcaps on Siding Bundles with
Installation RequirementsInstallation Requirements
2222
2323
Sample ProcedureSample Procedure• Not required but recommended by Maibec and MRS
• Customer must furnish
• Stain manufacturer of desired color(s)
• Color, # coats, solid or semi-trans., smooth or rough face
• Name, address, telephone number and attention _____
• Customer will receive samples in approximately 1 week
• When end user approves samples, MRS must receive color # shown on sample label as ‘CEL-0_ _ _ _ _ _ -_ _ ’
• Customer receives 1 gallon touchup free with 1000 bd. ft. +
• Maibec will finish shingles without the ‘CEL’ number but MRS’ customer and the end user have no recourse against Maibec and/or MRS regarding color
2424
Answers to Shingle F.A.Q.Answers to Shingle F.A.Q. Hammer caps are furnished with prefinished nails to Hammer caps are furnished with prefinished nails to
prevent chipping finish off head of nailsprevent chipping finish off head of nails Samples of various profiles and colors are available using Samples of various profiles and colors are available using
the same procedure as the shingles. Shingles will the same procedure as the shingles. Shingles will have a CEL # instead of a CEB #have a CEL # instead of a CEB #
Maibec will match any color but will use Cabot Latex Maibec will match any color but will use Cabot Latex Factory Finish stainFactory Finish stain
Maibec will not apply semi-transparent finish to smooth Maibec will not apply semi-transparent finish to smooth side of any siding productside of any siding product
2525
MerchandisingMerchandising
Siding/Trim Display BoardSiding/Trim Display Board Siding profilesSiding profiles Trim profilesTrim profiles Samples labeled with siding Samples labeled with siding
and trim names and colorand trim names and color
Siding/Trim Sample BoxSiding/Trim Sample Box Siding profilesSiding profiles Trim profilesTrim profiles Samples labeled with siding Samples labeled with siding
and trim names and colorand trim names and color
LiteratureLiterature Website - www.maibec.comWebsite - www.maibec.com
2626
Factory – Stained
SOLID WOOD SIDING
When you want wood, buy wood
top related