1 1 slide just-in-time and lean production systems professor ahmadi
Post on 23-Dec-2015
214 Views
Preview:
TRANSCRIPT
1 1 Slide
Slide
Just-in-Time and Lean Production Systems
Professor Ahmadi
2 2 Slide
Slide
WasteWaste is anything other than the is anything other than the minimumminimum amount of equipment, amount of equipment, materials, parts, space, and worker’s materials, parts, space, and worker’s time, which are absolutely essential time, which are absolutely essential to to add valueadd value to the product. to the product.
Shoichiro ToyodaShoichiro Toyoda
President, ToyotaPresident, Toyota
Introductory QuotationIntroductory Quotation
3 3 Slide
Slide
OverproductionOverproduction WaitingWaiting TransportationTransportation Inefficient processingInefficient processing InventoryInventory Unnecessary motionUnnecessary motion Product defectsProduct defects
Types of WasteTypes of Waste
4 4 Slide
Slide
Management philosophy of continuous and forced Management philosophy of continuous and forced problem solvingproblem solving
Supplies and components are ‘Supplies and components are ‘pulledpulled’ through ’ through system to arrive system to arrive wherewhere they are needed they are needed whenwhen they are needed.they are needed.
What Does Just-in-Time Do? What Does Just-in-Time Do? Attacks wasteAttacks waste
• Anything not adding value to the productAnything not adding value to the product From the customer’s perspectiveFrom the customer’s perspective
Exposes problems and bottlenecks caused by Exposes problems and bottlenecks caused by variabilityvariability• Deviation from optimumDeviation from optimum
Achieves streamlined productionAchieves streamlined production• By reducing inventoryBy reducing inventory
What is Just-in-Time?What is Just-in-Time?
5 5 Slide
Slide
Push versus PullPush versus Pull
PushPush system: material is system: material is pushedpushed into into downstream workstations regardless of downstream workstations regardless of whether resources are availablewhether resources are available
PullPull system: material is system: material is pulledpulled to a to a workstation just as it is neededworkstation just as it is needed
6 6 Slide
Slide
SuppliersSuppliers• reduced number of vendorsreduced number of vendors• supportive supplier relationshipssupportive supplier relationships• quality deliveries on timequality deliveries on time
LayoutLayout• work-cell layouts with work-cell layouts with testing at each step of testing at each step of
the processthe process• movable, changeable, flexible machinerymovable, changeable, flexible machinery• high level of workplace organization and high level of workplace organization and
neatnessneatness• reduced space for inventoryreduced space for inventory• delivery direct to work areasdelivery direct to work areas
JIT Contribution to Competitive AdvantageJIT Contribution to Competitive Advantage
7 7 Slide
Slide
InventoryInventory• small lot sizessmall lot sizes• low setup timeslow setup times• specialized bins for holding set number of partsspecialized bins for holding set number of parts
SchedulingScheduling• zero deviation from scheduleszero deviation from schedules• level scheduleslevel schedules• suppliers informed of schedulessuppliers informed of schedules• Kanban techniquesKanban techniques
JIT Contribution to Competitive Advantage - JIT Contribution to Competitive Advantage - ContinuedContinued
8 8 Slide
Slide
JIT Contribution to Competitive Advantage - JIT Contribution to Competitive Advantage - ContinuedContinued
Preventive MaintenancePreventive Maintenance• scheduledscheduled• daily routinedaily routine• operator involvementoperator involvement
Quality ProductionQuality Production• statistical process controlstatistical process control• quality by suppliersquality by suppliers• quality within firmquality within firm
9 9 Slide
Slide
JIT Contribution to Competitive Advantage - JIT Contribution to Competitive Advantage - ContinuedContinued
Employee EmpowermentEmployee Empowerment• empowered and cross-trained employeesempowered and cross-trained employees• few job classifications to ensure flexibility of few job classifications to ensure flexibility of
employeesemployees• training supporttraining support
CommitmentCommitment• support of management, employees, and support of management, employees, and
supplierssuppliers
10 10 Slide
Slide
ResultsResults
Queue and delay reduction, speedier throughput, Queue and delay reduction, speedier throughput, freed assetsfreed assets
Quality improvement, reduces waste and wins ordersQuality improvement, reduces waste and wins orders Cost reduction which reduces selling priceCost reduction which reduces selling price Variability reductions in the workplace reduces waste Variability reductions in the workplace reduces waste Rework reduction, reduces waste and wins ordersRework reduction, reduces waste and wins orders Faster response to the customer at lower cost and Faster response to the customer at lower cost and
higher quality, which leads to:higher quality, which leads to:
A competitive advantage!
11 11 Slide
Slide
Suppliers
Preventive Maintenance
Layout
Inventory
Scheduling
Quality
Employee Empowerment
JIT
Just-in-TimeJust-in-TimeSuccess FactorsSuccess Factors
12 12 Slide
Slide
Goals of JIT Partnership with SuppliersGoals of JIT Partnership with Suppliers JIT partnerships eliminateJIT partnerships eliminate
• Unnecessary activitiesUnnecessary activities• In - plant inventoryIn - plant inventory• In - transit inventoryIn - transit inventory• Poor suppliers Poor suppliers
SuppliersSuppliers
13 13 Slide
Slide
Goals of JIT partnershipsGoals of JIT partnerships
Elimination of unnecessary activitiesElimination of unnecessary activities Elimination of in-plant inventoryElimination of in-plant inventory Elimination of in-transit inventoryElimination of in-transit inventory Elimination of poor suppliersElimination of poor suppliers
14 14 Slide
Slide
DiversificationDiversification Poor customer schedulingPoor customer scheduling Frequent engineering changesFrequent engineering changes Quality assuranceQuality assurance Small lot sizesSmall lot sizes Physical proximityPhysical proximity
Concerns of SuppliersConcerns of Suppliers
15 15 Slide
Slide
JIT objective: Reduce movement of people and JIT objective: Reduce movement of people and materialmaterial• Movement is waste!Movement is waste!
JIT requiresJIT requires• Work cells for product familiesWork cells for product families• Moveable or changeable machinesMoveable or changeable machines• Short distancesShort distances• Little space for inventoryLittle space for inventory• Delivery directly to work areasDelivery directly to work areas
LayoutLayout
16 16 Slide
Slide
Traditional: Traditional: inventory exists in case problems inventory exists in case problems arisearise
JIT objective: JIT objective: eliminate inventoryeliminate inventory JIT requiresJIT requires
• Small lot sizesSmall lot sizes• Low setup timeLow setup time• Containers for fixed number of partsContainers for fixed number of parts
JIT inventory: Minimum inventory to keep JIT inventory: Minimum inventory to keep system runningsystem running
InventoryInventory
17 17 Slide
Slide
Lot Size ExampleLot Size Example(See page 635 of your textbook)(See page 635 of your textbook)
DD== Annual demand Annual demand = 400,000= 400,000 units unitsdd== Daily demand Daily demand = 400,000/250 = = 400,000/250 = 1,6001,600 per day per daypp== Daily production rate Daily production rate = 4,000= 4,000 units unitsQQ== EOQ desired EOQ desired = 400= 400HH== Holding cost Holding cost = $20= $20 per unit per unitSS== Setup cost Setup cost (to be determined)(to be determined)
Q =Q = 2DS2DSHH(1 -(1 - d/p d/p))
QQ22 = = 2DS2DSHH(1 -(1 - d/p d/p))
S S = = = = = $2.40= $2.40((QQ22)()(HH)(1 -)(1 - d/p d/p))
22DD(3,200,000)(0.6)(3,200,000)(0.6)
800,000800,000
18 18 Slide
Slide
JIT Inventory TacticsJIT Inventory Tactics
Use a pull system to move inventoryUse a pull system to move inventory Reduce lot sizeReduce lot size Reduce setup timeReduce setup time Develop Develop Just-in-TimeJust-in-Time delivery systems with delivery systems with
supplierssuppliers Deliver directly to point of useDeliver directly to point of use Perform-to-schedulePerform-to-schedule Reduce setup timeReduce setup time
19 19 Slide
Slide
JIT Scheduling TacticsJIT Scheduling Tactics
Communicate the schedule to Communicate the schedule to supplierssuppliers
Make level schedulesMake level schedules Perform to schedulePerform to schedule Eliminate wasteEliminate waste Produce in small lotsProduce in small lots Use kanbansUse kanbans Make each operation produce a perfect Make each operation produce a perfect
partpart
20 20 Slide
Slide
Japanese word for cardJapanese word for card• Pronounced ‘kahn-bahn’ (not ‘can-ban’)Pronounced ‘kahn-bahn’ (not ‘can-ban’)
Authorizes production from downstream Authorizes production from downstream operationsoperations• ‘‘Pulls’Pulls’ material through plant material through plant
May be a card, flag, verbal signal etc.May be a card, flag, verbal signal etc. Used often with fixed-size containersUsed often with fixed-size containers
• Add or remove containers to change Add or remove containers to change production rateproduction rate
KanbanKanban
21 21 Slide
Slide
Kanban: Additional PointsKanban: Additional Points
When producer and user are not in visual When producer and user are not in visual contact, a card may be used; otherwise, a light, contact, a card may be used; otherwise, a light, flag, or empty spot on the floor may work.flag, or empty spot on the floor may work.
Because a pull station may require several re-Because a pull station may require several re-supply components, several Kanban pull supply components, several Kanban pull techniques can be used at the same station.techniques can be used at the same station.
Usually, each card controls a specific quantity of Usually, each card controls a specific quantity of parts, although multiple card systems can be parts, although multiple card systems can be used if the producing cell produces several used if the producing cell produces several components or the lot size is different from the components or the lot size is different from the move size.move size.
In an MRP system, the schedule can be thought In an MRP system, the schedule can be thought of as a of as a “build”“build” authorization and the Kanban as authorization and the Kanban as a type of a type of “pull”“pull” system that initiates the actual system that initiates the actual productionproduction..
22 22 Slide
Slide
Kanban: Additional Points - ContinuedKanban: Additional Points - Continued
The Kanban cards provide direct control (limit) The Kanban cards provide direct control (limit) on the amount of work-in-process between on the amount of work-in-process between cells.cells.
If there is an intermediate storage area, a two-If there is an intermediate storage area, a two-card system may be used; one card circulates card system may be used; one card circulates between user and storage area, and the other between user and storage area, and the other circulates between the storage area and the circulates between the storage area and the producing area.producing area.
23 23 Slide
Slide
The Number of CardsThe Number of Cardsor Containersor Containers
Need to know the lead time needed to produce a container of parts
Need to know the amount of safety stock needed
Number of kanbans =Number of kanbans =
Demand during Demand during SafetySafetylead timelead time ++ stockstockSize of containerSize of container
24 24 Slide
Slide
Number of Kanbans ExampleNumber of Kanbans Example(See page 640 of your textbook)(See page 640 of your textbook)
Daily demandDaily demand == 500500 cakes cakesProduction lead timeProduction lead time== 22 days days(wait time + (wait time + material handling time + material handling time + processing time)processing time)Safety stockSafety stock == 1/21/2 day dayContainer sizeContainer size == 250250 cakes cakes
Demand during lead time Demand during lead time = 2= 2 days days x 500x 500 cakes cakes = 1,000= 1,000
Number of kanbans Number of kanbans = = 5= = 51,000 + 2501,000 + 250
250250
25 25 Slide
Slide
JIT reduces inventoryJIT reduces inventory JIT limits number defects with small lotsJIT limits number defects with small lots JIT requires TQMJIT requires TQM
• Statistical process controlStatistical process control• Worker involvementWorker involvement
Inspect own workInspect own work Quality circlesQuality circles
• Immediate feedbackImmediate feedback
QualityQuality
26 26 Slide
Slide
JIT Quality TacticsJIT Quality Tactics
Use statistical process controlUse statistical process control Empower employeesEmpower employees Build failsafe methods (checklists, etc.)Build failsafe methods (checklists, etc.) Provide immediate feedbackProvide immediate feedback
27 27 Slide
Slide
Get employees involved in product & process Get employees involved in product & process improvementsimprovements• Employees know job best!Employees know job best!
JIT requiresJIT requires• EmpowermentEmpowerment• Cross-trainingCross-training• Training supportTraining support• Few job classificationsFew job classifications
Employee EmpowermentEmployee Empowerment
28 28 Slide
Slide
Lean ProductionLean Production
Lean Production supplies Lean Production supplies customers with exactly customers with exactly whatwhat the the customer wants, customer wants, whenwhen the the customer wants, without customer wants, without wastewaste, , through through continuous continuous improvementimprovement..
29 29 Slide
Slide
Attributes of Lean ProducersAttributes of Lean Producers
use JIT to eliminate virtually all inventoryuse JIT to eliminate virtually all inventory build systems to help employees produce a build systems to help employees produce a
perfect part every timeperfect part every time reduce space requirementsreduce space requirements develop close relationships with suppliersdevelop close relationships with suppliers educate supplierseducate suppliers eliminate all but value-added activitieseliminate all but value-added activities make jobs more challengingmake jobs more challenging reduce the number of job classes and build reduce the number of job classes and build
worker flexibilityworker flexibility
top related