© abb group 7. mai 2015 | slide 1 evd4 - the smart evolution primary distribution circuit-breaker...
Post on 16-Dec-2015
216 Views
Preview:
TRANSCRIPT
© ABB Group 18. April 2023 | Slide 1
eVD4 - The Smart eVolution Primary distribution circuit-breaker withintegrated protection, control and sensors
© ABB GroupApril 18, 2023 | Slide 2
eVD4: The Smart eVolution Complete integration in a single device
Current and voltage sensor in each pole
Equipped with Relion® technology: protection and control unit RBX615 with IEC61850 and Goose
HMI
(panel interface)
Measuring Protection and control Communication
© ABB GroupApril 18, 2023 | Slide 3
eVD4: The Smart eVolution Medium voltage vacuum circuit-breaker
Innovation and a sound foundationof proven technology:
Since 1987, over 550,000 VD4 circuitbreakers have been successfullyinstalled in a wide range of applications, worldwide
Based on Relion technology
.
© ABB GroupApril 18, 2023 | Slide 4
eVD4: The Smart eVolution Reduce time from purchase to commissioning
Standard panel Version with eVD4
© ABB GroupApril 18, 2023 | Slide 5
eVD4: The Smart eVolution Versions, specifications, standards
Versions:
Fixed / Withdrawable for UniGear ZS1switchgear and PowerCube units
Specifications: Up to 17.5 kV rated voltage Up to 2,500 A rated current Up to 40 kA (3 s) breaking capacity
Standards: IEC 62271, EMC EN 50263 (2000),
EN60255-26 (2007)
www.abb.com/mediumvoltage
© ABB Group 18. April 2023 | Slide 6
eVD4 - The Smart eVolution Components
© ABB GroupApril 18, 2023 | Slide 7
Sensor converts primary circuit current and voltage into a signal
Rogowski coil measures current
Capacitive divider measures voltage
Measurements are in class 1: 1/5P Rogowski coil 1/3P capacitive divider
eVD4: The Smart eVolution Sensors
Current sensor
Voltage sensor
© ABB GroupApril 18, 2023 | Slide 8
Advantages:
Absolutely linear voltage and current signals
Low potential signal is safer for people and auxiliary equipment
Extremely low energy usage
Fewer raw materials used
Automatic sensor selection, depending on relay configuration
eVD4: The Smart eVolution Sensors
© ABB GroupApril 18, 2023 | Slide 9
The integrated unit provides protection, control, measuring and monitoring functions for substations. It also protects overhead lines, cable lines and motors.
Protection functions adapt to any radial and meshed network, regardless of earthing layout.
IEC 61850 compliant; supports communication between substation equipment and messaging system (GOOSE) in native mode.
Dedicated automatic configuration tool (PCM600)
eVD4: The Smart eVolution RBX615 unit based on Relion® technology
© ABB GroupApril 18, 2023 | Slide 10
GOOSE: Generic Object OrientedSubstation Event
Units based on Relion® technology installed in switchgear communicate with each other and, through a network switch, with the substation’s control system.
eVD4: The Smart eVolution RBX615 unit based on Relion® technology
Communication board:
Ethernet, two channels
Communication protocols:
Native IEC 61850 (including GOOSE)
TCP/IP Modbus®
© ABB GroupApril 18, 2023 | Slide 11
eVD4: The Smart eVolution RBX615 unit based on Relion® technology
Pre-configurations:
Feeder 1: Non-directional overcurrent protection and non-directional earth fault protection (current only)
Feeder 2: Non-directional overcurrent protection and directional earth fault protection based on measurement of phase voltage values (current and voltage)
Feeder 3: Directional overcurrent protection and directional earth fault protection based on measurement of phase voltage values and overvoltage and undervoltage protection (current and voltage)
Motor 1: Motor protection with measurement and protection functions based on current (current only)
Motor 2: Motor protection with measurement and protection functions based on current and voltage (current and voltage)
© ABB GroupApril 18, 2023 | Slide 12
HMI allows the integrated unit to be parameterized, and displays the mimic diagram and certain values
Large, multi-page double display:Single-line diagram (SLD) page (left) + Standard menu (right)
8 LEDs
Power supply: 48 ... 250 V dc/ac
eVD4: The Smart eVolution Human-machine interface (HMI)
© ABB GroupApril 18, 2023 | Slide 13
Connects auxiliary circuit of the circuit-breaker and integrated unit with auxiliary switchgear circuits
Two Ethernet ports transmit digital and communication signals
eVD4: The Smart eVolution Specific connector for eVD4
© ABB Group 18. April 2023 | Slide 14
eVD4 - The Smart eVolution Advantages
© ABB GroupApril 18, 2023 | Slide 15
eVD4: The Smart eVolution Performance improvements and integration advantages
Performance improvements by component harmonization and optimization leading to a MV system simplification and to an increase of the overall reliability.
The eVD4 offers specific advantages compared with a standard MV solution in all stages of the panel life cycle
© ABB GroupApril 18, 2023 | Slide 16
Advantages along the panel life cycle Specification and ordering
Specification and flexibility:
No need to define any parameters for the sensors
RBX615 pre-configuration can be customized
Supply management:
A complete MV solution (CB, Relay and Sensor) can be obtained with just one single order and one single reference
© ABB GroupApril 18, 2023 | Slide 17
Installation: The eVD4 is a ready to install solution.
The components are internally wired. All the wiring is instantaneously connected to the switchgear through the CB plug.
Less effort for engineering and wiring: The switchgear is highly standardized Less risk of errors and increased safety
and reliability Easier and faster engineering Shorter and reliable connections
Flexibility for last minute modification: The integrated solution is more versatile
and flexible.
Advantages along the panel life cycle Installation, Less wiring, Flexibility
© ABB GroupApril 18, 2023 | Slide 18
Advantages along the panel life cycle Installation, Less wiring, Flexibility – Low Voltage Compartment
Standard circuit breakers eVD4
© ABB GroupApril 18, 2023 | Slide 19
Advantages along the panel life cycle Testing, Maintenance, Spare parts
Easy and complete testing of the whole measurements chain by primary injection: It is possible to test the whole measurement chain by a primary injection in the CB contacts, easily accessible without any modification in the panel.
Easy maintenance, reduced Mean Time To Repair (MTTR): Standard accessories with few variances, readily available for easy maintenance.
Self-diagnostic functions
System quickly repaired in case of failure (no stops in production)
Optimization of the spare parts in stock
© ABB GroupApril 18, 2023 | Slide 20
Advantages along the panel life cycle
Easy removable integrated protection and control unit:
The unit is fixed in a docking unit by means of screws
Facilitates easy access and service
Testing, Maintenance, Spare parts
© ABB GroupApril 18, 2023 | Slide 21
Advantages along the panel life cycle Retrofit and revamping
Extremely simple and straightforward solution for retrofitting and revamping:
Faster and easier revamping process
Flexibility thanks to sensors high range of linearity and RBX615 programmability
No need to act on CTs and VTs as they come with the eVD4
Reduced effort for wiring and retesting
© ABB GroupApril 18, 2023 | Slide 22
Advantages along the panel life cycle Switchgear simplification and easy operation
Specification Ordering Easy to install Less effort for engineering and wiring Less effort for Factory Acceptance
Test (FAT) while increasing safety and reliability
Flexibility and easier last minute modifications
Extremely simple and straight forward solution for retrofitting and revamping
Easy maintenance and reduced Mean Time To Repair (MTTR)
Optimization of the spare parts in stock
© ABB Group 18. April 2023 | Slide 23
eVD4 - The Smart eVolution More than a product
© ABB GroupApril 18, 2023 | Slide 24
Our specialized team helps you get the most out of the integrated circuitbreaker:
eVD4 Level 1 (Basic): circuit-breaker and basic maintenance Level 2 (Advanced): advanced maintenance Level 3 (Specialist): service activities
Integrated protection and control unit (RBX615) Programming control and protection functions (communication,
GOOSE, etc.)
eVD4: The Smart eVolution Not only a product: Training
© ABB GroupApril 18, 2023 | Slide 25
1. Complete set of documentation and marketing material:All the information you may need on the eVD4 documentation
2. A specific eVD4 support line is available
Email : evd4.support@it.abb.com
3. Technical drawings and electrical diagrams available in electronic version
eVD4: The Smart eVolution Not only a product: Customer support
© ABB Group 18. April 2023 | Slide 26
eVD4 - The Smart eVolution What is coming next
© ABB GroupApril 18, 2023 | Slide 27
New Features for the release 2.0:
RS485 CommCard and Modbus RTU
Optical Ethernet COM card
HMI function keys
Automatic relay configuration recovery by the HMI (a backup of the application will be stored in the HMI)
Automatic parameterization of the CB condition monitoring function for an effective diagnostic of the CB.
eVD4 used with RIO600 to have flexibility in the number of I/Os
eVD4: The Smart eVolution Integrated protection and control unit RBX615
© ABB GroupApril 18, 2023 | Slide 28© ABB Group 18. April 2023 | Slide 28
© ABB Group 18. April 2023 | Slide 29
eVD4 - The Smart eVolution Protection Functions
© ABB GroupApril 18, 2023 | Slide 30
eVD4: The Smart eVolution Protection Functions
© ABB GroupApril 18, 2023 | Slide 31
eVD4: The Smart eVolution Protection Functions
© ABB GroupApril 18, 2023 | Slide 32
eVD4: The Smart eVolution Protection Functions
© ABB Group 18. April 2023 | Slide 33
eVD4 - The Smart eVolution Digital I/Os
© ABB GroupApril 18, 2023 | Slide 34
eVD4: The Smart eVolution Digital Inputs
© ABB GroupApril 18, 2023 | Slide 35
eVD4: The Smart eVolution Digital Outputs
top related