© 2011 autodesk charging on from schematics to panels in autocad ® electrical (ma4757-l) todd...

© 2011 Autodesk

Charging on from Schematics to Panels in AutoCAD® Electrical (MA4757-L)Todd SchmoockSolutions Engineer - Synergis Technologies, Inc.

© 2011 Autodesk

Before getting started

Turn cell phones to silent!

Our lab assistants are: Kevin Smedley Greg Shaffer Randy Brunette

Some questions: How many currently use AutoCAD® Electrical? How many are using the schematic tools? How many are using the panel tools?

© 2011 Autodesk

Class Summary

In this lab you will take an AutoCAD® Electrically smart schematic control system design and create the AutoCAD® Electrical smart panel. You will:• Extract the information from the schematic drawing to create the panel drawing• See how to utilize the reporting functionality by extracting the information from the

newly created panel drawing

You will do all this with tools available in a typical installation of AutoCAD® Electrical!

© 2011 Autodesk

Learning Objectives

At the end of this class, you will be able to: Add a table and catalog data to the default_cat.mdb file Create a custom panel symbol (Footprint) Add an entry to the footprint_lookup.mdb file

Add part number to the panel database

Create a panel drawing from the electrical smart schematic drawing Execute bi-directional updates between schematic and panel layout Run panel reports

© 2011 Autodesk

Class Setup

© 2011 Autodesk

Class Setup:

Activate the AutoCAD® Electrical project “MA4757-L  Note: The file will be located in a folder called "MA47572-L" which is the Autodesk

University lab name for this class.

© 2011 Autodesk

Add a table and catalog data to the default_cat.mdb file

© 2011 Autodesk

Add a table and catalog data to the default_cat.mdb file

RMB on IM-T-9A symbol and select Edit Component. Select the Lookup button in the Catalog Data area:

Add catalog information to the ZS newly created table:

© 2011 Autodesk

Create a custom panel symbol (footprint)

© 2011 Autodesk

Create a custom panel symbol (footprint):

Open "Operator Station Layout.dwg" and type “wblock” at the command line Name the file "Interface Module.dwg"

Navigate to “Libs/Panel” folder: Create subfolder called “Banner”

An example would be:C:\Users\Public\Documents\Autodesk\Acade 2012\Libs\Panel\BANNER\Interface Module.dwg

© 2011 Autodesk

Add an entry to the footprint_lookup.mdb file

© 2011 Autodesk

Add an entry to the footprint_lookup.mdb file:

Use Footprint Database File Editor: Create table named BANNER:

Add record “IM*” & Browse for file and location:

© 2011 Autodesk

Create a panel drawing from the electrical smart schematic drawing

© 2011 Autodesk

Create a panel drawing from the electrical smart schematic drawing: Use the Schematic List tool & process "Interface Module Schematic Drawing.dwg":

Select the BANNER record and Insert. Place on the DIN rail:

© 2011 Autodesk

Execute bi-directional updates between schematic and panel layout

© 2011 Autodesk

Execute bi-directional updates between schematic and panel layout: Edit the BANNER footprint you just added & add a description:

Click OK to update and save. Use Surfer to verify updates:

© 2011 Autodesk

Run a Panel Report

© 2011 Autodesk

Run a Panel Report:

Run a Bill of Material report on the Active drawing to view the new footprint added:

© 2011 Autodesk

Autodesk University Session Feedback

Your feedback is very important to Autodesk

Attendees can complete session survey on their mobile device, PC or at a survey station

Each session survey completed will be entered for a daily drawing for a free AU 2012 pass.

You can help make AU 2012 better!

Complete the AU Conference Survey at a survey station and receive an AU 2011 T-Shirt

© 2011 Autodesk

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.