amc-mecanocaucho® type cb anti vibration mounts are
TRANSCRIPT
AMC-MECANOCAUCHO® type CB anti vibration mounts are
installed in pairs. Installation is simplified as both mounts are
fixed with one through bolt and washers at each end of the
installed mount.
The CB mount is provided with a built in radial wear plate that
prevents the elastomeric element coming into contact with the
sharp edges of laser cut holes in support frames or structures
that can cause friction in traditionally used semi-bonded
mounts . This wear plate reduces the need to machine radius
or chamfer holes , reducing cost. The specific design permits
high dynamic loading whilst limiting movement due to their
multi-axial snubbing.
TECHNICAL CHARACTERISTICS APPLICATIONS
- Agricultural or construction equipment cabins,engines, radiators, transmission ,battery boxes.
- Marine equipment
- Mobile Generators or compressors.
- Chassis frames for Military, Bus, Truck,Motorhome and Emergency vehicles.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
The AMC-MECANOCAUCHO® Type CB isradially 30% softer than axially. This feature isespecially interesting for those machines orequipment where radial axis vibration isolationis important.
The mount is provided with a built insnubbering system that allows the followingmaximum displacements:
Vertical: +/- 6 mm
Horizontal: +/- 3mm
The mount can be supplied in two differentsizes and in different hardness compounds toaccommodate applications from 30 to 550 Kgper mount.
Metal parts are embedded in rubber in orderto prevent corrosion.
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
DRAWINGS
SECTION A-A
8,5Ø
26 ±0,2Ø
40Ø
191715
10
CB-40 SUPPORT1
CB-40 SUPPORT2
A
A
SECTION A-AMAX. TORQUE: 20,5 Nm
SECTION A-AWITHOUT TORQUE
Ø8,5Ø38
22
14,5
5
14,5
Ø8,5Ø38
Ø26 + 0,20
FRAME
22
19
5
19
3443
WASHERCB-40 SUPPORT 1FRAME
CB-40 SUPPORT 2
WASHER
Q= T= T=
DIMENSIONS
TypeType Tightening torque Tightening torque MAX (Nm)MAX (Nm)
QQ(mm)
TT(Max.)
TT(Min.)
WeightWeight(gr) WASHERWASHER BOLT SIZEBOLT SIZE
(Metric)(Metric)BOLT SIZEBOLT SIZE(Imperial)(Imperial) ShoreShore Max. LoadMax. Load
(kg) CodeCode
CB 40 20,5 26 5 5 30 610052 M8 5/16”
45Sh 8 156070
55Sh 18 156071
65Sh 25 156072
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
DRAWINGS
A
A
SECTION A-AMAX. TORQUE: 113 Nm
SECTION A-AWITHOUT TORQUE
16,5Ø16,5Ø66Ø66Ø
529
,329
,35
78,6
32,3
2032
,35
5
84,640Ø
FRAME
WASHER
CB-60 SUPPORT 1FRAME
CB-60 SUPPORT 2
WASHER
SECTION A-A
16,5 34
,3
16,5Ø25,5Ø
39,5 ±0,2Ø
27,3
37
66Ø
CB-60 SUPPORT 2
CB-60 SUPPORT 1
+0,20Q= T= 20T=
DIMENSIONS
TypeType Tightening torque Tightening torque MAX (Nm)MAX (Nm)
QQ(mm)
TT(Max.)
TT(Min.)
WeightWeight(gr) WASHERWASHER BOLT SIZEBOLT SIZE
(Metric)(Metric)BOLT SIZEBOLT SIZE(Imperial)(Imperial) ShoreShore Max. LoadMax. Load
(kg) CodeCode
CB 60 113 40 20 20 140 606130 M16 5/8”
45 Sh 70 156011
55 Sh 120 156013
65 Sh 170 156014
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
DRAWINGS
A
A
SECTION A-AMAX. TORQUE: 170Nm
SECTION A-AWITHOUT TORQUE
WASHER
CB-65 SUPPORT 1FRAME
CB-65 SUPPORT 2
WASHER
18,75Ø66Ø
30,2
530
,25
55
80,5
18,75Ø66Ø
34
20
345
5
8841ØFRAME
SECTION A-A
18,9Ø
40,5 ±0,2Ø
65,5Ø
3819
2935
,25
Ø38,5
CB-65 SUPPORT 1
CB-65 SUPPORT 2
+ 0,20Q= T= 20
T=
DIMENSIONS
TypeType Tightening torque Tightening torque MAX (Nm)MAX (Nm)
QQ(mm)
TT(Max.)
TT(Min.)
WeightWeight(gr) WASHERWASHER BOLT SIZEBOLT SIZE
(Metric)(Metric)BOLT SIZEBOLT SIZE(Imperial)(Imperial) ShoreShore Max. LoadMax. Load
(kg) CodeCode
CB 65 170 41 20 20 175 706004 M18 11/16"
45 Sh 70 156031
55 Sh 120 156032
65 Sh 170 156033
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
DRAWINGS
A
A
SECTION A-AMAX. TORQUE: 170Nm
Ø16,5Ø76
5
33
15
33
5
81
SECTION A-AWITHOUT TORQUE
Ø16,5Ø76
Ø49FRAME
38
15
3891
55
CB-76SUPPORT 1FRAME
CB-76SUPPORT 2
WASHER
WASHER
SECTION A-A
Ø16,5 ±0,2
Ø78,5Ø48 ±0,3
1833
35,5
±0,2
40±0
,3
4,5
CB-76 SUPPORT 1
CB-76 SUPPORT 2
± 0,3Q= T= T=
DIMENSIONS
TypeType Tightening torque Tightening torque MAX (Nm)MAX (Nm)
QQ(mm)
TT(Max.)
TT(Min.)
WeightWeight(gr) WASHERWASHER BOLT SIZEBOLT SIZE
(Metric)(Metric)BOLT SIZEBOLT SIZE(Imperial)(Imperial) ShoreShore Max. LoadMax. Load
(kg) CodeCode
CB 76 170 49 15 15 223 608074 M16 5/8”
45 Sh 60 156053
55 Sh 90 156054
65 Sh 150 156055
75 Sh 200 156056
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
DRAWINGS
A
A
SECTION A-AMAX. TORQUE: 170 Nm
16,5Ø76Ø
3220
325
5
84
SECTION A-AWITHOUT TORQUE
16,5Ø76Ø
38FRAME
WASHER
CB-80 SUPPORT 1FRAME
CB-80 SUPPORT 2
WASHER
37,5
20
37,5
95
33*
18*
33*
37,5
*
18*
37,5
*
93*
5
* FRAMETHICKNESSOF18 mm SECTION A-A
16,5 ±0,2Ø24Ø
1832
,537
±0,2
37,5 ±0,3Ø78,5Ø
36Ø
CB-80 SUPPORT 1
CB-80 SUPPORT 2
+ 0,20Q= T=
DIMENSIONS
TypeType Tightening torque Tightening torque MAX (Nm)MAX (Nm)
QQ(mm)
TT(Max.)
TT(Min.)
WeightWeight(gr) WASHERWASHER BOLT SIZEBOLT SIZE
(Metric)(Metric)BOLT SIZEBOLT SIZE(Imperial)(Imperial) ShoreShore Max. LoadMax. Load
(kg) CodeCode
CB 80 170 38 20 18 242 608074 M16 5/8”
45 Sh 90 156001
55 Sh 140 156002
65 Sh 200 156003
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
DRAWINGS
A
A
SECTION A-AMAX. TORQUE: 470 Nm
22,5Ø110Ø
WASHER
CB-110SUPPORT 1
FRAME
CB-110SUPPORT 2
WASHER
SECTION A-AWITHOUT TORQUE
22,5Ø110Ø
57ØFRAME
39,5
25
39,5
55
104
45
25
4511
5
55 SECTION A-A
56,8 ±0,2Ø
4727 40
22,5Ø52Ø
52
109Ø
CB-110 SUPPORT 1
CB-110 SUPPORT 2
+ 0,50Q= T= T=
DIMENSIONS
TypeType Tightening torque Tightening torque MAX (Nm)MAX (Nm)
QQ(mm)
TT(Max.)
TT(Min.)
WeightWeight(gr) WASHERWASHER BOLT SIZEBOLT SIZE
(Metric)(Metric)BOLT SIZEBOLT SIZE(Imperial)(Imperial) ShoreShore Max. LoadMax. Load
(kg) CodeCode
CB 110 470 57 25 25 630 610192 M22 | M20 7/8” | 3/4"
45 Sh 235 156021
55 Sh 375 156022
65 Sh 550 156023
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
DRAWINGS
A
A
SECTION A-AMAX. TORQUE: 1190 Nm
WASHER
CB-130SUPPORT 1FRAME
CB-130SUPPORT 2
WASHER
SECTION A-AWITHOUT TORQUE
71ØFRAME
Ø30,5Ø145
1010
47
40
4713
4
Ø30,5145
1010
53
40
5314
6
SECTION A-A
30,5 +1,8-0,3Ø
70,5 ±0,5ØØ127
43±0
,514
,5
57±0
,2
HEIG
HT IN
UNAS
SEM
BLED
COND
ITIO
N
CB-130 SUPPORT 1
CB-130 SUPPORT 2
Ø
+ 0,50Q= T= T=
DIMENSIONS
TypeType Tightening torque Tightening torque MAX (Nm)MAX (Nm)
QQ(mm)
TT(Max.)
TT(Min.)
WeightWeight(gr) WASHERWASHER BOLT SIZEBOLT SIZE
(Metric)(Metric)BOLT SIZEBOLT SIZE(Imperial)(Imperial) ShoreShore Max. LoadMax. Load
(kg) CodeCode
CB 130 1190 71 40 40 1200 608278 M30 1/8"
45 Sh 325 156026
55 Sh 500 156027
65 Sh 600 156028
70 Sh 800 156029
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
Elastical properties
NATURAL FREQUENCYAMC-MECANOCAUCHO® CB 40-65
frequency Hz10 12 15 18 20 22
Load
(Kg)
3
4
56
8
1012
15
20
2530
40
5060
80
100120
150
200
CB 60 45 / CB 65 45
CB 60 65 / CB 65 65CB 60 55 / CB 65 55
CB 40 45
CB 40 55
CB 40 65
NATURAL FREQUENCYAMC-MECANOCAUCHO® CB 76-130
frequency Hz8 10 12 14 16 20 2218
Load
(Kg)
20
25
30
40
50
607080
100
150
200
250
300
400
500
600700800
CB 80 45 Tmin
CB 80 45 TmaxCB 80 55 Tmax
CB 80 65 Tmax
CB 80 65T minCB 110 45
CB 11055
CB 110 65
CB 80 55 Tmin
CB 130 45
CB 130 55
CB 130 65
CB 130 70
CB 76 45
CB 76 55
CB 76 65
CB 7675
LOAD DEFLECTION CURVEAMC-MECANOCAUCHO® CB 40-65
Deflection (mm)1 1,5 2 2,5 3
Load
(Kg)
3
4
56
8
1012
15
20
2530
40
5060
80
100120
150
200
CB 40 45
CB 40 55CB 40 65
CB 60 45 / CB 65 45CB 60 55/ CB 65 55CB 60 65/ CB 65 65
LOAD DEFLECTION CURVEAMC-MECANOCAUCHO® CB 76-130
Deflection (mm)1 1,5 2 2,5 3 4 5
Load
(Kg)
20
2530
40
50607080
100
150
200
250300
400
500600700800
CB 80 45 TminCB 80 45 Tmax
CB 80 55 Tmin
CB 80 55 Tmax
CB 80 65 Tmax
CB 80 65 Tmin CB 110 45CB 110 55CB 110 65
CB 130 45
CB 130 55CB 130 65
CB 130 70
CB 76 45CB 76 55
CB 76 65CB 76 75
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ndt of
The CB mounts must be installed according to the following
installation instructions:
They can be installed in frames of different thicknesses according tothe values of T, given in the table below. The load vs. deformationcurves will vary depending on the thickness of the frame on whichthe mount is installed. This thickness "T" determines the degree ofprecompression of the mount.For the correct installation of the mount, it is recommended to makea hole in the frame with diameter Q, given in the table below.The use of washers is recommended in the event that the supportsurface does not completely cover the rubber surface.Respect the tightening torque of the mount.In case of any doubt, contact the technical department.
.
Rubber Metal anti vibration mounts
CB ANTI VIBRATION MOUNTSCB ANTI VIBRATION MOUNTS
OPERATION AND ASSEMBLY
AMC MECANOCAUCHOIndustrialdea Zona A - Pab. 35.Asteasu E-20159, GipuzkoaSpain
Tel.: +34 943 69 61 02Fax: +34 943 69 62 19
[email protected] www.mecanocaucho.comwww.akustik.com
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.