Amazon Echo Dot 2nd Generation Analog toDigital Convertor Replacement

Replace the Analog to Digital Convertor for this device.

Written By: Cassidy O'Connor

Amazon Echo Dot 2nd Generation Analog to Digital Convertor Replacement Draft: 2018-01-10Guide ID: 100833 -

This document was generated on 2019-09-19 05:45:15 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

INTRODUCTION

Use this guide to replace the analog to digital convertor on the Amazon Echo Dot. This component islocated on the LED/speaker board, however, the whole board must be replaced, rather than just theanalog to digital convertor.

TOOLS:iFixit Opening Tools (1)Metal Spudger (1)T8 Torx Screwdriver (1)

Amazon Echo Dot 2nd Generation Analog to Digital Convertor Replacement Draft: 2018-01-10Guide ID: 100833 -

This document was generated on 2019-09-19 05:45:15 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6

Step 1 — Analog to Digital Convertor

Power off and unplug the echo

Using the plastic opening tool, peel off the rubber layer on the bottom of the echo

Step 2

Use a T8 screwdriver to unscrew the four 1.6mm torx screws

Remove the black cylindrical base

Amazon Echo Dot 2nd Generation Analog to Digital Convertor Replacement Draft: 2018-01-10Guide ID: 100833 -

This document was generated on 2019-09-19 05:45:15 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6

Step 3

Use the metal spudger to lift the ZIF connector

Remove the ribbon cable from the slot

Step 4

Remove the motherboard

Amazon Echo Dot 2nd Generation Analog to Digital Convertor Replacement Draft: 2018-01-10Guide ID: 100833 -

This document was generated on 2019-09-19 05:45:15 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6

Step 5

Remove the silver divider

Remove the black rubber divider

Remove the plastic white frame

Step 6

Use the metal spudger to lift the ZIF connector

Remove the ribbon cable from the slot on the speaker board

Amazon Echo Dot 2nd Generation Analog to Digital Convertor Replacement Draft: 2018-01-10Guide ID: 100833 -

This document was generated on 2019-09-19 05:45:15 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6

To reassemble your device, follow these instructions in reverse order.

Step 7

Remove the speaker board whichcontains the analog to digitalconverter

Amazon Echo Dot 2nd Generation Analog to Digital Convertor Replacement Draft: 2018-01-10Guide ID: 100833 -

This document was generated on 2019-09-19 05:45:15 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6