alphaguard battery charge management system installation …€¦ · alphaguard™ battery charge...

2
1 ALPHAGuard Battery Charge Management System Installation Instructions Battery Monitoring Cables 36V Harness, 2.5': Alpha p/n 875-090-30 48V Harness, 2.5': Alpha p/n 875-090-31 36V Harness, 6': Alpha p/n 875-090-32 48V Harness, 6': Alpha p/n 875-090-33 Voltage Sense Cables Single String, 9', 36/48V: Alpha p/n 875-510-20 Dual String, 9', 36/48V: Alpha p/n 875-510-21 Single String, 35', 36/48V: Alpha p/n 875-510-23 Dual String, 35', 36/48V: Alpha p/n 875-510-22 Model Description AG-CMT-3SC AlphaGuard manages 3 batteries* AG-CMT-4SC AlphaGuard manages 4 batteries* * Includes 6' battery monitoring cables. Battery strings contain lethal voltages. Refer to battery manufacturer's installation manual before installing or making any connections to the batteries. Refer to the power supply manufacturer's installation instructions before making any connections to the power supply. WARNING! ELECTRICAL HAZARD The ALPHAGuard requires ventilation for proper operation and optimum life. Place the ALPHAGuard on top of the batteries, and position it so it will not fall between the batteries. Standby power is not available while the batteries are disconnected. CAUTION! The ALPHAGuard supplies electrical compensation for differences in individual batteries in the string. One ALPHAGuard is required per battery string. A wire harness connects the ALPHAGuard to each of the batteries in the string. The unit can be configured to pass measurements from the battery string to a status monitoring device (EDSM card, DOCSIS transponder, etc.) via an interface cable. Voltage Sense Connection Status Indicator LED Battery Cable Connection 2. Connect all battery monitoring harness leads to the appropriate battery terminals per the stack up diagram below. Connect the battery cable and the voltage sense cable to the ALPHAGuard. Refer to the wiring diagrams on page 2 for wiring details. 1. Set the BATTERY BREAKER to the OFF position, and unplug the battery string from the power supply. 3. Place the ALPHAGuard on top of the batteries so it will not fall between the batteries. ALPHAGuard Placement member of The Group TM Alpha Technologies Inc. 3767 Alpha Way Bellingham WA 98226 USA Tel: +1 360 647 2360 Fax: +1 360 671 4936 Alpha Technologies Ltd. 7700 Riverfront Gate Burnaby BC V5J 5M4 Canada Tel: +1 604 436 5900 Fax: +1 604 436 1233 Alpha Technologies Europe Ltd. Twyford House, Thorley Bishop’s Stortford, Hertfordshire CM22 7PA United Kingdom Tel: +44 1279 501110 Fax: +44 1279 659870 Alpha Technologies GmbH Hansastrasse 8 D 91126 Schwabach Germany Tel: +49 9122 79889 0 Fax: +49 9122 79889 21 AlphaTec Ltd. 339 Saint Andrews Street Suite 101 Andrea Chambers 3307 Limassol Cyprus Tel: +357 25 375675 Fax: +357 25 359595 AlphaTEK ooo Khokhlovskiy Pereulok 16 Stroenie 1 Office 403 109028 Moscow Russia Tel: +7 495 916 1854 Fax: +7 495 916 1349 Alpha Technologies Suite 1903, Tower 1 33 Canton Road, Kowloon Hong Kong, China Tel: +852 2736 8663 Fax: +852 2199 7988 Alpha Technologies Alpha reserves the right to change specifications without notice. © 2014 Alpha Technologies Inc. All Rights Reserved. Alpha is a registered trademark of Alpha Technologies. 012-306-C0-004 Rev. E (06/2014) For more information visit www.alpha.com Battery Monitoring Cable To Power Supply/Battery Split Washer Flat Washer ALPHAGuard Installation Any liquid emissions from a valve-regulated lead-acid (VRLA) battery contains dilute sulfuric acid, which is harmful to the skin and eyes. Emissions are electrolytic and are electrically conductive and corrosive. WARNING! CHEMICAL HAZARD

Upload: others

Post on 22-Sep-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ALPHAGuard Battery Charge Management System Installation …€¦ · ALPHAGuard™ Battery Charge Management System Installation Instructions Battery Monitoring Cables 36V Harness,

1

ALPHAGuard™ Battery Charge Management System Installation Instructions

Battery Monitoring Cables36V Harness, 2.5': Alpha p/n 875-090-3048V Harness, 2.5': Alpha p/n 875-090-3136V Harness, 6': Alpha p/n 875-090-3248V Harness, 6': Alpha p/n 875-090-33

Voltage Sense CablesSingle String, 9', 36/48V: Alpha p/n 875-510-20Dual String, 9', 36/48V: Alpha p/n 875-510-21Single String, 35', 36/48V: Alpha p/n 875-510-23Dual String, 35', 36/48V: Alpha p/n 875-510-22

Model DescriptionAG-CMT-3SC AlphaGuard manages 3 batteries*AG-CMT-4SC AlphaGuard manages 4 batteries** Includes 6' battery monitoring cables.

• Battery strings contain lethal voltages. Refer to battery manufacturer's installation manual before installing or making any connections to the batteries.

• Refer to the power supply manufacturer's installation instructions before making any connections to the power supply.

WARNING! ELECTRICAL HAZARD

• The ALPHAGuard requires ventilation for proper operation and optimum life. Place the ALPHAGuard on top of the batteries, and position it so it will not fall between the batteries.

• Standby power is not available while the batteries are disconnected.

CAUTION!

The ALPHAGuard supplies electrical compensation for differences in individual batteries in the string. One ALPHAGuard is required per battery string. A wire harness connects the ALPHAGuard to each of the batteries in the string. The unit can be configuredtopassmeasurementsfromthebatterystringtoastatusmonitoringdevice(EDSMcard,DOCSIStransponder,etc.)via an interface cable.

Voltage Sense Connection

StatusIndicatorLED

Battery Cable Connection2. Connect all battery monitoring harness leads to the appropriate battery terminals per the stack up diagram

below. Connect the battery cable and the voltage sense cable to the ALPHAGuard. Refer to the wiring diagrams on page 2 for wiring details.

1. SettheBATTERYBREAKERtotheOFFposition,andunplugthebatterystringfromthepowersupply.

3. Place the ALPHAGuard on top of the batteries so it will not fall between the batteries.

ALPHAGuard Placement

member of The GroupTM

Alpha Technologies Inc.3767 Alpha WayBellingham WA 98226USATel: +1 360 647 2360Fax:+13606714936

Alpha Technologies Ltd.7700 Riverfront GateBurnaby BC V5J 5M4CanadaTel: +1 604 436 5900Fax:+16044361233

AlphaTechnologiesEuropeLtd.Twyford House, ThorleyBishop’s Stortford, HertfordshireCM22 7PAUnitedKingdomTel: +44 1279 501110Fax:+441279659870

Alpha Technologies GmbHHansastrasse 8D 91126 SchwabachGermanyTel: +49 9122 79889 0Fax:+4991227988921

AlphaTec Ltd.339 Saint Andrews StreetSuite 101 Andrea Chambers3307 LimassolCyprusTel: +357 25 375675Fax:+35725359595

AlphaTEKoooKhokhlovskiyPereulok16Stroenie1Office403109028 MoscowRussiaTel: +7 495 916 1854Fax:+74959161349

Alpha TechnologiesSuite 1903, Tower 1 33CantonRoad,KowloonHongKong,ChinaTel: +852 2736 8663Fax:+85221997988

Alpha Technologies Alphareservestherighttochangespecificationswithoutnotice.© 2014 Alpha Technologies Inc. All Rights Reserved. Alpha is a registered trademark of Alpha Technologies.

012-306-C0-004Rev.E(06/2014)

Formoreinformationvisitwww.alpha.com

Battery Monitoring CableTo Power

Supply/Battery

Split WasherFlatWasher

ALPHAGuard Installation

Anyliquidemissionsfromavalve-regulatedlead-acid(VRLA)batterycontainsdilutesulfuricacid,whichisharmfultotheskinandeyes.Emissionsareelectrolyticandareelectricallyconductiveandcorrosive.

WARNING! CHEMICAL HAZARD

Page 2: ALPHAGuard Battery Charge Management System Installation …€¦ · ALPHAGuard™ Battery Charge Management System Installation Instructions Battery Monitoring Cables 36V Harness,

2

3B 2B 1B

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

3A 2A 1A

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

Orange

Yellow Brown

Black

Orange

Yellow

4A 3A 2A

Brown

Black

OrangeRed

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1A

NEG(-)

POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

OrangeRed

Yellow Brown

Black

OrangeRed

4A 3A 2A

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1A

NEG(-)

POS(+)

4B 3B 2B

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1B

NEG(-)

POS(+)

R E

D (+

)

B L

A C

K (-

)

1A3A 2A

Black (-) 0V

Red

(+)

Red

(+)

Red

(+)

Red

(+)

NEG(-) NEG(-) NEG(-)

POS(+)POS(+) POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

String A

String B

String A

String B

Orange

3B 2B 1B

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

3A 2A 1A

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow BrownB

lackOrange

Yellow Brown

Black

Orange

Yellow

4A 3A 2A

Brown

Black

OrangeRed

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1A

NEG(-)

POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

OrangeRed

Yellow Brown

Black

OrangeRed

4A 3A 2A

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1A

NEG(-)

POS(+)

4B 3B 2B

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1B

NEG(-)

POS(+)

R E

D (+

)

B L

A C

K (-

)

1A3A 2A

Black (-) 0V

Red

(+)

Red

(+)

Red

(+)

Red

(+)

NEG(-) NEG(-) NEG(-)

POS(+)POS(+) POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

String A

String B

String A

String B

Orange

To Battery Cable Connection

3B 2B 1B

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

3A 2A 1A

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

Orange

Yellow Brown

Black

Orange

Yellow

4A 3A 2A

Brown

Black

OrangeRed

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1A

NEG(-)

POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

OrangeRed

Yellow Brown

Black

OrangeRed

4A 3A 2A

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1A

NEG(-)

POS(+)

4B 3B 2B

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1B

NEG(-)

POS(+)

R E

D (+

)

B L

A C

K (-

)

1A3A 2A

Black (-) 0V

Red

(+)

Red

(+)

Red

(+)

Red

(+)

NEG(-) NEG(-) NEG(-)

POS(+)POS(+) POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

String A

String B

String A

String B

Orange

3B 2B 1B

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

3A 2A 1A

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

Orange

Yellow Brown

Black

Orange

Yellow

4A 3A 2A

Brown

Black

OrangeRed

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1A

NEG(-)

POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

OrangeRed

Yellow Brown

Black

OrangeRed

4A 3A 2A

Black (-) 0V

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1A

NEG(-)

POS(+)

4B 3B 2B

POS(+)

NEG(-) NEG(-) NEG(-)

POS(+) POS(+)

1B

NEG(-)

POS(+)

R E

D (+

)

B L

A C

K (-

)

1A3A 2A

Black (-) 0V

Red

(+)

Red

(+)

Red

(+)

Red

(+)

NEG(-) NEG(-) NEG(-)

POS(+)POS(+) POS(+)

R E

D (+

)

B L

A C

K (-

)

Yellow Brown

Black

String A

String B

String A

String B

Orange

To TransponderA/B Connection

To Voltage Sense Connection

To TransponderA/B Connection

To Voltage Sense Connection

To Battery Cable Connection

To Battery Cable Connection

Dual String Battery Wiring Diagrams

36V Wiring

36V Wiring

48V Wiring

48V Wiring

Single String Battery Wiring Diagrams

4. Plug the battery string cable into the power supply battery input connection and the voltage sense cable into the transponder A/B connection. Turn battery breaker to the ON position.

5. After the power supply resumes charging the batteries, verify thegreenstatusindicatorLEDilluminates(>38.6for36VDCstrings;>51.4VDCfor48VDCstrings).Ifitdoesnotilluminate,verify wiring is correct and battery voltages.

When using the Voltage Sense connectionwiththeXMPowerSupplyandexternalAlphaDOCSISTransponder,clip the black wire from the cable kit at both ends. See the illustration below.

NOTE:

Black Wire Label for XM Series Applications

Black Wire Label for XM Series Applications

012-306-C0-004Rev.E(06/2014)

6. Verify the individual battery voltages are displayed on the transponder web page and/or monitoring system.