All the power of the LabSpec instrument in a benchtop analyzer For fixed-location laboratory analysis, the LabSpec® 4 Bench model offers a space- and cost-efficient alternative to ASD’s portable LabSpec 4 Standard-Res laboratory instrument. The Bench model offers the same level of performance as the LabSpec 4 Standard-Res model, including the same cutting-edge NIR spectroscopy, the same 10 nm resolution, and the same performance enhancements that greatly improve measurement speed and quality. The LabSpec 4 Bench simply needs a stationary home with AC power.

• Double the signal-to-noise performance in the SWIR region translates to faster measurement with no compromise in quality.

• Non-destructive measurement means minimal sample prep and allows for the reuse of the sample in other research efforts.

• High-throughput material measurement permits processing of hundreds of samples per day.

• Models are transferable between the LabSpec 4 Bench and LabSpec 4 Standard-Res instruments.

• Works with all ASD sampling accessories.

U n i q U e a p p l i c at i o n s : • Powders

• Solids

• Quantification of materials

• Multivariate analysis of data

LabSpec 4 Bench Specifications

peRfoRma nceWavelength range 350-2500 nm

Resolution 3 nm @ 700 nm 10 nm @ 1400/2100 nm

Scanning time 100 milliseconds

Signal-to-noise ratio VNIR 9,000:1 @ 700 nm SWIR 1 9,000:1 @ 1400 nm SWIR 2 4,000:1 @ 2100 nm

Photometric noise VNIR 4.8 x 10-5 AU or 48 µAU@ 700 nm SWIR 1 4.8 x 10-5 AU or 48 µAU@ 1400 nm SWIR2 1.1 x 10-4 AU or 110 µAU@ 2100 nm

Stray light VNIR: 5000:1 (0.02%) NIR: 10,000:1 (0.01%)

Wavelength reproducibility 0.1 nm

Wavelength accuracy 0.5 nm

Channels 2151

VNIR detector (350-1000 nm) 512 element silicon array

SWIR 1 & 2 detectors (1001-1800 nm) & (1801-2500 nm) Graded Index InGaAs Photodiode, TE Cooled

ceR t if ic at ion a nd a ppRoval sCE certified EN61010-1:2001 2nd Edition EN61326-1:2006

EU Directive 2006/95/EC, 2004/108/EC

NIST traceable calibration

21 CFR, Part 11 Installed per customer request

USP 1119 Installed per customer request and purchase of applicable USP Standards

c ommUnicat ionsWired 10/100 Base T Ethernet port with

Ethernet cross-over cable

ph y sic al & en v iRonmen talDimensions (H x W x D) 31.2 x 10.7 x 26.7 cm

(12.3 x 4.2 x 10.5 in)

Weight 5.2 kg (12 lbs)

Operating temperature 5 to 35° C (41 to 93° F)

Storage temperature -15 to 40° C (5 to 104° F)

Input power AC/DC switching power supply (power supply type: external desktop)

AC input 90-240 VAC, 50/60 Hz

DC input 12 VDC, 30 W

addit ional de ta il s Software compatibility Indico® Pro, GRAMS spectroscopy

software suite by Thermo Scientific, The Unscrambler® by Camo Software

Warranty One year full warranty including expert customer support

Computer

An updated spectrometer configuration helps the LabSpec 4 Bench work better, faster. You can now capture the same quality of measurements in a quarter of the time required by previous LabSpec models. The improved signal-to-noise characteristics offer a particular benefit to high-volume production environments that require better results while still maintaining a high analytic throughput.

The LabSpec 4 Bench is suitable for measurement of materials with broad spectral features, such as food and feed products, forestry products, and raw materials identification.

C

For more information contact: analytikLtd (UK and Ireland Distributor)Barn B, 2 Cygnus Business Park, Middle Watch, Swavesey, Cambridgeshire, CB24 4AAT: +44 (0)870 991 4044 F: +44 (0)870 135 2488 E: info@analytik.co.uk www.analytik.co.uk