all-pro - cooper industries 4 cooperlighting the all-pro advantage full line of housings...
TRANSCRIPT
ALL-PRO
COOPER LIGHTING2
ALL-PRO housings and trims are available in a varietyof sizes ideal for any room of the house. Differentstyle trims provide almost any desired lighting effect.
ALL-PRO housings are available to solve speciallighting situations such as sloped ceilings. Thesehousings allow the light to be aimed straight downregardless of ceiling pitch.
TABLE OF CONTENTS
The All Pro Advantage..........................................................4-74" Line Voltage Housings and Trims ..................................8-134" Low Voltage Housings and Trims ................................14-195" Housings and Trims.....................................................20-296" IC Housings and Trims ................................................30-416" Non IC Housings and Trims.........................................42-536" IC “Universal” Housings and Trims .............................54-646" IC Shallow Ceiling Housings and Trims.......................65-716" Non-IC Shallow Ceiling Housings and Trims...............72-776" Slope Ceiling Housings and Trims...............................78-81Numerical Index.....................................................................82
COOPER LIGHTING
ALL-PRO
3
Conserve heating and air conditioning costs by usingIC rated ALL-PRO housings that maintain an unbro-ken insulation barrier. IC AIR-TITE housings and trimsalso minimize drafts and prevent moisture damage inunconditioned attic spaces.
ALL-PRO remodel housings can be installed frombelow the ceiling in existing ceilings. Cut a hole in theceiling using the template provided, bring power tofixture with flexible cable, make wiring connectionsand install housing.
ALL-PRO new construction housings are designedfor installation in new construction or in existing ceil-ings where there is access above the ceiling. Hangerbars include a pre-installed nail and junction boxesare equipped with push-in wire connectors to simplifyinstallation.
ALL-PRO
COOPER LIGHTING4
THE ALL-PRO ADVANTAGE
Full Line of Housings• 4", 5", 6" Aperture Sizes • New Construction• AIR-TITE™ • Slope Ceiling• Remodel • Insulated Ceiling• Non-IC • “No-Socket-Bracket”• Shallow Ceiling • Low Voltage
ALL-NAIL Bar Hanger• Bar hangers have pre-installed nails.• Bar hangers are pre-installed on housings.• Integral T-Grid ceiling clip - No additional clips needed.• Bar hangers can be re-oriented 90°.• Bar hangers can be shortened without tools.
COOPER LIGHTING
ALL-PRO
5
THE ALL-PRO ADVANTAGE
Locking Screw & Multiple Crimp Points• Patented regressed screw locks hanger bars in position -regressed design does not interfere with ceiling material.
• Screw can be tightened with slotted or phillips screwdriver ornut driver.
• Five bar hanger locking points on the housing allow thedownlight to stay in place during drywalling.
Push-In Wire Connectors• Push-in wire connectors speed installation - simply strip andinsert supply wires into connectors. No additional wire nutsare required.
• Standard on every ALL-PRO housing.• Integral wire traps for non-metallic sheathed cable - no addi-tional connectors necessary.
• Knockouts for metallic cable and rigid conduit connectors.• Rated for through branch circuit wiring.
ALL-PRO
COOPER LIGHTING6
LISTINGS AND CODES• ALL-PRO housings and trims are UL and cUL listed inappropriate categories
• Wide choice of AIR-TITE housings and trims to meet statecodes as qualified per test standard ASTM-E283.
• Meets AIR-TITE Code standards of:- California Title 24- IEEC- New York - ECC- Washington State EC
• ALL-PRO housings and trims are pat of the Cooper Lightingfamily of products
“No-Socket-Bracket” System• “No-Socket-Bracket” housings and socket supporting trimsspeed installation of multiple units.
• Provides consistent lamp position in multiple units.
THE ALL-PRO ADVANTAGE
COOPER LIGHTING
ALL-PRO
7
Wide Trim Selection• Trim retention system choices include:
- Torsion springs - Friction clips - Coil springs• Many trims available in choice of torsion springs or frictionclips.
Contractor Friendly Trim Rings• All-Pro trims feature an extra wide trim ring.• Helps hide any cutout irregularities.• ERT707 and ERT709 trims in white and black baffle includeboth narrow style and wide style trim ring - use one, discardthe other.
High Gloss Appliance White Finish• Fingerprints don’t show.• Easy to clean.• Matches appliances.• Matches electrical devices - wall plates, switches etc.
THE ALL-PRO ADVANTAGE
ALL-PRO
COOPER LIGHTING8
ET400
The ET400 is designed for use with small aperture trims.Theshallow height allows it to be used in spaces where verticalheight is limited.The ET400 can be installed in newconstruction or where there is access above the ceiling.
Housing: Die-stamped 20 gauge CRS with gray powder coatfinish.
Plaster Frame: Housing is secured in plaster frame with springbarbs.The housing can be adjusted in the plaster frame toadjust for different ceiling materials.The housing can beremoved from the plaster frame to provide access to thejunction box.
Junction Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Four conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.
Bar Hangers: Pre-installed, captive bar hangers allow housingto be positioned at any point within a 24" joist span. Score linesprovided for easy shortening for 12” joists. Integral nailsimplifies installation. Bar hangers can be repositioned 90°.IntegralT-bar clip snaps ontoT-bar spline for quick alignment.
Socket: Fixed position porcelain socket with nickel plated brassscrew shell provides consistent lamp positioning. Shippinginsert protects socket from overspray.
Thermal Protector: Self resetting thermal protector deactivatesfixture if overheating occurs due to improper lamping ormisapplied insulation.
Labels: • UL/cUL Listed for Damp location• UL/cUL Listed for FeedThrough• IP rated for select trims
5-1/4"[133mm]
5"[127mm]
1/2"[13mm]
4-1/2"[114mm]
8"[203mm]
4" Ape rtu re
Non - IC Hous ingfo r Use InUn insu l a tedCe i l i ngs
Any Insu l a t i onP resen t Mus t BeKep t 3 " FromHous ing
COOPER LIGHTING
ALL-PRO
9
ET400R
The ET400 is designed for use with small aperture trims.Theshallow height allows it to be used in spaces where verticalheight is limited.The ET400R can be installed from below theceiling.
Housing: Die-stamped 20 gauge CRS with gray powder coatfinish.
Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief also included. Quick-connect wiring connectorsincluded.
Socket : Fixed position porcelain socket with nickel platedbrass screw shell provides consistent lamp positioning.Shipping insert protects socket against overspray
Remodel C l ips : Four remodel clips secure housing andaccommodate 1/2" and 5/8" ceiling thickness.
Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping or misapplied insulation.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough
11-1/2"[292mm]
4-5/8"[116mm]
5"[127mm]
1/2"[13mm]4-1/4"
[108mm]
4" Ape rtu re
Non - IC Hous ingfo r Use InUn insu l a tedCe i l i ngs
Any Insu l a t i onP resen t Mus t BeKep t 3 " FromHous ing
ALL-PRO
COOPER LIGHTING10
EI400AT
5-1/4"[133mm]
8"[203mm]
4-1/2"[114mm]
4-7/8"[124mm]
The EI400AT is a small aperture housing for providing accentand task lighting.The EI400AT is designed for use in insulatedceilings where it will be in direct contact with insulation. It is anAIR-TITE housing designed to prevent air flow between livingspaces and unconditioned attic areas.
4" Ape rtu re
IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs
COOPER LIGHTING
ALL-PRO
11
Housing: Double wall aluminum construction helps dissipateheat. Housing is secured in plaster frame with spring barbs.Theinner housing can be adjusted in the plaster frame tocompensate for different ceiling materials.
Plaster Frame: Galvanized steel construction.The innerhousing can be removed from the plaster frame to provide accessto the junction box. Plaster frame includes locking screws forhanger bars and cutouts for crimping hanger bars in position.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Sevenconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strainrelief also included. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Score lines provided for easy shortening for 12” joists. Integralnail simplifies installation. Bar hangers can be repositioned 90°.IntegralT-bar clip snaps ontoT-bar spline for quick alignment.
Socket : Fixed position porcelain socket with nickel platedbrass screw shell provides consistent lamp positioning.Shipping insert protects socket from overspray.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulationand combustible material
Meets following restricted air flow and IC requirements:• State of CaliforniaTitle 24 Low Efficacy IC andAT requirements
• Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy ConservationConstruction Code (NY-ECCC)
• Certified Under ASTM-E283
ALL-PRO
COOPER LIGHTING
Clear Specular Ref lector
ET400ET400R
40W R16, 40W A19, 50WPAR20, 50W R20
EI400AT 50W R20, 50W PAR20
ET400ET400R
50W PAR20, 50W R20
EI400AT35W R20 (50W PAR20,50W R20 with H1999
socket extender)
2-1/2"[63mm]
1-1/8"[28mm]
5"[127mm]
Trims For ET400, ET400R, EI400AT
ERT403High Gloss ApplianceWhiteTrimwith Clear Specular Reflector
12
ERT401High Gloss ApplianceWhiteTrimRing with Black Baffle
ERT401WHTHigh Gloss ApplianceWhiteTrimRing withWhite Baffle
Plast ic Baff le
5"[127mm]
COOPER LIGHTING
ALL-PRO
Metal Baff le
Lamps for ERT413WHT:
Lamps for ERT413:
OD
H
ET400ET400REI400AT
40W R16, 40W A19,50W PAR20, 50W R20
5"[127mm]
Trims For ET400, ET400R, EI400AT
ET400ET400R
40W R16, 60W PAR16
EI400AT 40W R16
ET400EI400AT
45W R20, 40W A19,50W PAR20, 50W R20
ET400R 40W A19, 50W R20,50W PAR20
13
4-3/8"[111mm]
ERT413High Gloss ApplianceWhiteTrimRing with Black Baffle
ERT413WHTHigh Gloss ApplianceWhiteTrimRing withWhite Baffle
Eyebal l - 30 ˚ T i l t
ERT402High Gloss ApplianceWhiteTrimRing withWhite Eyeball
Aperture:2-1/8" [54mm]
OD:5" [127mm]
ALL-PRO
COOPER LIGHTING14
ET400LV
4" Ape rtu re
Non - IC Hous ing fo rUse In Un insu l a tedCe i l i ngs
Any Insu l a t i onP resen t Mus t Be Kep t3 " From Hous ing
12V Low Vo l t ageMR16 Lamp
5-1/4"[133mm]
8"[203mm]
5"[127mm]
4-1/2"[114mm]
1/2"[13mm]
The ET400LV is a small aperture low voltage housing forproviding accent and task lighting.The ET400LV is designedfor use in non-insulated ceiling or for insulated ceilings butinsulation must be kept 3" from all sides of the housing.
Housing: Die-stamped 20 gauge CRS with gray powder coatfinish.
Plaster Frame: Housing is secured in plaster frame withspring barbs.The housing can be adjusted in the plaster frameto adjust for different ceiling materials.The housing can be re-moved from the plaster frame to provide access to the junctionbox.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Four conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.
Socket : Ceramic socket with reflector for bi-pin MR16 lamps.
Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Score lines provided for easy shortening for 12” joists. Integralnail simplifies installation. Bar hangers can be repositioned 90°.Hangers fit ontoT-bar spline for quick alignment.
Transformer : 120V Integral magnetic transformer steps linevoltage down to lamp operating voltage. For MR16 lamps up to50W.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping ormisapplied insulation.
Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• IP Listed
COOPER LIGHTING
ALL-PRO
15
ET400LVR
4" Ape rtu re
Non - IC Hous ing fo rUse In Un insu l a tedCe i l i ngs
Any Insu l a t i onP resen t Mus t BeKep t 3 " From Hous ing
12V Low Vo l t age MR16Lamp
4-5/8"[118mm]
5"[127mm]
1/2"[13mm]
4-1/4"[108mm]
The ET400LVR is a small aperture low voltage remodel housingfor providing accent and task lighting.The ET400LVR is designedfor use in non-insulated existing ceiling or for insulated ceilingsbut insulation must be kept 3" from all sides of the housing. Itcan be installed from below the ceiling.
Housing: Die-stamped 20 gauge CRS with gray powder coatfinish.
Junct ion Box: U.L. listed for through branch circuit wiring. Sixconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strain re-lief also included. Quick-connect wiring connectors included.
Socket : Ceramic socket with reflector disc for bi-pin MR16lamps.
Remodel C l ips : Four remodel clips secure housing andaccommodate 1/2" and 5/8" ceiling thickness.
Transformer : 120V integral magnetic transformer steps linevoltage down to lamp operating voltage. For MR16 lamps up to50W.
Support : Helps support weight of junction box andtransformer. Threaded stem can be adjusted for varyingceiling thicknesses.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping ormisapplied insulation.
Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough
13-1/2"[343mm]
ALL-PRO
COOPER LIGHTING16
EI400LVAT
4" Ape rtu re
IC A IR -T ITE Hous -i ng fo r I n su l a tedCe i l i ngs
12V Low Vo l t ageMR16 Lamp
9-1/2"[140mm]
7-1/8"[181mm]
7-3/8"[187mm]
1/2"[13mm]
13"[300mm]
4-1/2"[114mm]
The EI400LVAT housing has an integral low voltagetransformer that supplies 12 volts to MR16 lamps. It can beused in ceilings where it will be in direct contact withinsulation.The EI400LVAT is suited for use in insulated ceilingsin residential and commercial applications. It is an AIR-TITEhousing designed to prevent air flow between living spacesand unconditioned attic spaces.
COOPER LIGHTING
ALL-PRO
17
Housing: Double wall aluminum construction for greater heatdissipation. EI400LVAT housing is gasketed to prevent airflowfrom heated or air conditioned spaces.
Plaster Frame: Inner housing adjusts in plaster frame forceilings up to 1" thick. Includes locking screws for hanger barsand cutouts for crimping hanger bars in position.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Sevenconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strainrelief also included. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Score lines provided for easy shortening for 12” joists. Integralnail simplifies installation. Bar hangers can be repositioned 90°.Hangers fit ontoT-bar spline for quick alignment.
Transformer : 120V integral magnetic transformer steps linevoltage down to lamp operating voltage.
Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact withInsulation and combustible material
Meets following requirements:
• State of CaliforniaTitle 24 Low Efficacy ICand AirTite
•Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy ConservationConstruction Code (NY-ECCC)
• Certified Under ASTM-E283
ALL-PRO
COOPER LIGHTING
Specular Ref lector• “Cat’s paw” retention spring
Baff le• “Cat’s paw” retention spring
ET400LVET400LVRET400LVAT
12V 50W MR16
1-1/4"[31mm]
1-1/4"[31mm]
5"[127mm]
5"[127mm]
Trims For ET400LV, ET400LVR, EI400LVAT
ERT403LVHigh Gloss ApplianceWhiteTrimwith Clear Specular Reflector
18
ERT403LVGHigh Gloss ApplianceWhiteTrim with Gold Reflector
ERT401LVWHigh Gloss ApplianceWhiteTrim withWhite Baffle
ERT401LVHigh Gloss ApplianceWhiteTrim with Black baffle
ET400LVET400LVRET400LVAT
12V 50W MR16
COOPER LIGHTING
ALL-PROTrims For ET400LV, ET400LVR, EI400LVAT
19
ET400LVET400LVRET400LVAT
12V 50W MR16
Eyebal l - 30° T i l t• “Cat’s paw” retention spring
Slot Aperture• “Cat’s paw” retention spring
Aperture:2" [51mm]
OD:5" [127mm]
ERT402LVHigh Gloss ApplianceWhiteTrimwithWhite Eyeball
ERT404LVHigh Gloss ApplianceWhiteTrimand Slot
ET400LVET400LVRET400LVAT
12V 50W MR16
Slot:1-3/8" x 2-1/8"[35mm x 54mm]
OD:5" [127mm]OD
ALL-PRO
COOPER LIGHTING20
ET500
5" Ape rtu re
Non - IC Hous ing fo rUse In Un insu l a tedCe i l i ngs
Any Insu l a t i onP resen t Mus t BeKep t 3 " FromHous ing
7"[178mm]
7"[178mm]
1/2"[13mm]
5-3/4"[146mm]
10-1/2"[267mm]
The ALL-PRO ET500 has a 5" aperture designed for PAR20 andPAR30 halogen lamps.The 5" diameter trim size makes thisseries the right choice for applications where dramatic yetinconspicuous lighting is required and higher wattages aredesired. If the ET500 is used in insulated ceilings, insulationmust be kept 3" from all sides of fixture.
Housing: Die-stamped 22 gauge CRS with white powder coatfinish. Housing adjusts in plaster frame to accommodateceiling up to 1-3/8" thick.
Plaster Frame: Galvanized steel construction.The housingcan be removed from plaster frame to provide access to thejunction box. Regressed locking screw for securing hangerbars. Cutouts for easily crimping hanger bars in position
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Sevenconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strainrelief also included. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Score lines provided for easy shortening for 12" joists. Integralnail simplifies installation. Bar hangers reposition 90°. IntegralT-bar clip snaps ontoT-bar spline for quick alignment.
Socket :Porcelain socket with nickel plated brass screw shellsnaps into trim for consistent lamp positioning. Shipping insertprotects socket from overspray.
Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping or incorrect application of insulation material.
Labels • UL/cUL listed for Damp Location• UL/cUL listed for FeedThrough• IP Rated
COOPER LIGHTING
ALL-PRO
21
ET500R
5" Ape rtu re
Non - IC Hous ing fo rUse In Un insu l a tedCe i l i ngs
Any Insu l a t i onP resen t Mus t BeKep t 3 " FromHous ing
6"[152mm]
1/2"[13mm]
14"[356mm]
5-1/2"[140mm]
The ALL-PRO ET500R remodel housing has a 5" aperturedesigned for PAR20 and PAR30 halogen lamps.The five inch"diameter trim size makes this series the right choice forapplications where dramatic yet inconspicuous lighting isrequired and higher wattages are desired. If the ET500R is usedin insulated ceilings, insulation must be kept 3" from all sidesof fixture.The ET500R can be installed from below the ceiling.
Housing: Die-stamped 22 gauge CRS with white powder coatfinish. Housing will slip through 5-1/2" ceiling opening. Integralflange secures fixture against ceiling.
Remodel C l ips : Four remodel clips secure housing and ac-commodate 1/2" and 5/8" ceiling thickness.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Sevenconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strainrelief also included. Quick-connect wiring connectors included.
Socket : Porcelain socket with nickel plated brass screw shell,snaps into trim for consistent lamp positioning. Shipping insertprotects socket from overspray.
Thermal Protector : Self resetting thermal protectordeactivates fixture if an incorrect lamp is used or if ceilinginsulation material is not applied correctly.
Labels : • UL/cUL listed for damp location• UL/cUL listed for FeedThrough• IP Rated
ALL-PRO
COOPER LIGHTING22
EI500AT
5" Ape rtu re
IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs
7"[178mm]
7"[178mm]
1/2"[13mm]5-3/4"
[146mm]10-1/2"[267mm]
The ALL-PRO EI500AT has a 5" aperture designed for PAR20and PAR30 halogen lamps. EI500AT is designed for use ininsulated ceilings and may be completely covered in insulation.AIR-TITE™ design meets restricted air flow requirements.
Housing: Gasketed die-stamped 20 gauge aluminum.Housing adjusts for ceilings up to 1-3/8" thick. AIR-TITE gasketsupplied with housing to complete ASTM-E283 installation.
Plaster Frame: Galvanized steel construction.The housingcan be removed from plaster frame to provide access to thejunction box. Regressed locking screw secures hanger bars.Cutouts provided for easily crimping hanger bars in position.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Sevenconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strainrelief also included. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.Regressed set screw locks hanger bars in position. Score linesallow shortening for 12" joists. Integral nail simplifiesinstallation. Bar hangers can be repositioned 90° without tools.IntegralT-bar clip snaps ontoT-bar spline for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell,snaps into trim for consistent lamp positioning. Shipping insertprotects socket from overspray.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material
Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low Efficacy LuminaireIC and AT requirement
•Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy Conservation ConstructionCode (NY-ECCC)
• Certified Under ASTM-E283
COOPER LIGHTING
ALL-PRO
23
EI500RAT
5" Ape rtu re
IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs
Remode l Hous ing
The ALL-PRO EI500RAT housing has a 5" aperture designed forPAR20 and PAR30 halogen lamps. Designed for use in insulatedceilings and may be completely covered in insulation.This is anAIR-TITE housing and meets restricted airflow requirements.The EI500RAT can be installed from below the ceiling.
Housing: Die stamped 20 gauge aluminum. Integral flangesecures fixture against ceiling. Pre-installed AIR-TITE gasketcompletes ASTM-E283 installation.
Remodel C l ips : Four remodel clips secure housing andaccommodate 1/2" and 5/8" ceiling thickness.
Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four cable pryouts simplify NM (non-metallic) cableinstallation. Quick-connect wiring connectors included.
Socket : Porcelain socket with nickel plated brass screw shell,snaps into trim for consistent lamp positioning. Shipping insertprotects socket from overspray.
Thermal Protector : Integral thermal protector deactivatesfixture if an incorrect lamp is used or if insulation material isapplied incorrectly.
Labels . • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material
Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low Efficacy Luminaire ICand AT requirement
•Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy Conservation ConstructionCode (NY-ECCC)
• Certified Under ASTM-E283
7"[178mm]
1/2"[13mm]
6"[152mm]
14"[356mm]
5-1/2"[140mm]
ALL-PRO
COOPER LIGHTING
ET500ET500R
75W R30, 75W PAR30,75W PAR30L, 65W BR30
EI500AT 50W R30, 60W BR30,75W PAR30
EI500RAT 50W PAR30L, 50W PAR30,60W BR30
Trims For ET500, ET500R, EI500AT, EI500RAT
24
ERT520High Gloss ApplianceWhiteTrim with Clear Specular Re-flector Cone
ERT520WHTHigh Gloss ApplianceWhiteTrim withWhite Reflector Cone
ERT520GHigh Gloss ApplianceWhiteTrim with Gold Reflector Cone
ET500ET500R
60W A19
EI500ATEI500RAT
40W A19
Ref lector Cone• Torsion Springs pull trimtight to ceiling
6-1/2"[165mm]
3-1/4"[82mm]
Ref lector• Torsion Springs pull trim tightto ceiling
ERT521High Gloss ApplianceWhiteTrimwith Clear Specular Reflector
ERT521GHigh Gloss ApplianceWhiteTrim with Gold Reflector
5"[127mm]
6-1/2"[165mm]
COOPER LIGHTING
ALL-PROTrims For ET500, ET500R, EI500AT, EI500RAT
25
ET500ET500R
50W R20, 50W PAR20,75W R30, 75W PAR30
EI500AT 50W PAR20, 50W R20,65W BR30, 75W PAR30
EI500RAT30W R20, 35W PAR20,
50W PAR30, 50W PAR30L,60W BR30
ET500ET500R
75W R30, 75W PAR30
ET500ET500R
65W BR30, 75W R30,75W PAR30
EI500AT 60W BR30, 50W PAR30
EI500RAT 60W BR30, 50W PAR30,50W PAR30L
ERT501High Gloss ApplianceWhiteTrim with Black Baffle
ERT501WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
Metal Baff le Splay• Torsion Springs pull trimtight to ceiling
6-1/2"[165mm]
Metal Baff le• Torsion Springs pull trimtight to ceiling
ERT510High Gloss ApplianceWhiteTrimwith Black Baffle
ERT510WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle6-1/2"
[165mm]
2-1/16" [52mm]
5"[127mm]
ERT512High Gloss ApplianceWhiteTrimwith Black Baffle
ERT512WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
Deep Coi lex™ Baff le• Torsion Springs pull trimtight to ceiling
6-1/2"[165mm]
ALL-PRO
COOPER LIGHTING
ET500ET500R
75W A19, 65W BR30,75W R30, 75W PAR30L
EI500ATEI500RAT
65W BR30, 75W PAR30L
ET500ET500R
60W A19, 65W BR30,75W R30, 75W PAR30L
EI500ATEI500RAT
65W BR30, 50W PAR30L
Trims For ET500, ET500R, EI500AT, EI500RAT
26
Baff le• Friction Clip retention• Lamps-ERT513WHT:
• Lamps-ERT513:
ET500ET500R
75W A19, 65W BR30,75W R30, 75W PAR30L
EI500ATEI500RAT
65W BR30, 75W PAR30L
ET500ET500R
60W A19, 65W BR30, 75WR30, 75W PAR30L
EI500ATEI500RAT
65W BR30, 50W PAR30L
ERT513High Gloss ApplianceWhite Trimwith Black Baffle
ERT513WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle
H
OD6-3/4"[171mm]
5"[127mm]
6-3/4"[171mm]
5"[127mm]
ERT513TSHigh Gloss ApplianceWhiteTrim with Black Baffle and withtorsion spring construction
ERT513WHTTSHigh Gloss ApplianceWhite TrimwithWhite Baffle and with torsionspring construction
Baff le• Friction Clip retention• Lamps-ERT513WHTTS:
• Lamps-ERT513TS:
H
OD
5"[127mm]
6-3/4"[171mm]
COOPER LIGHTING
ALL-PROTrims For ET500, ET500R, EI500AT, EI500RAT
27
Gimbal - 25° T i l t• Torsion Springs pull trimtight to ceiling
ERT560High Gloss ApplianceWhiteTrimwithWhite Gimbal
ET500ET500R
75W PAR30
EI500ATEI500RAT
75W PAR30
6-1/2"[165mm]
ERT570High Gloss ApplianceWhiteTrimwithWhite Eyeball
ERT570PBPolished BrassTrim with PolishedBrass Eyeball
Eyebal l 30° T i l t• Torsion Springs pull trimtight to ceiling
ET500ET500REI500ATEI500RAT
75W PAR30
ET500ET500REI500ATEI500RAT
50W R20, 50W PAR20
6-1/2"[165mm]
ERT571High Gloss ApplianceWhiteTrimwithWhite Eyeball
Eyebal l - 30° T i l t• Torsion Springs pull trimtight to ceiling
6-1/2"[165mm]
ALL-PRO
COOPER LIGHTING
ET500ET500R
75W A19, 75W PAR30
EI500ATEI500RAT
40W A19, 50W PAR30
ET500ET500R
60W A19, 50W PAR30,50W PAR30L, 65W BR30
EI500ATEI500RAT
35W PAR30L
ET500ET500R
65W BR30, 75W R30,75W PAR30
EI500AT 65W BR30, 75W PAR30,75W R30
EI500RAT 50W PAR30, 75W PAR30L,60W BR30
Trims For ET500, ET500R, EI500AT, EI500RAT
28
ERT500High Gloss ApplianceWhiteSplayTrim
Splay Trim• Torsion Springs pull trim tightto ceiling
6-1/2"[165mm]
1-7/8"[48mm]
ERT550High Gloss ApplianceWhiteTrim with Frosted Drop Diffuser- AIR-TITETrim*
Frosted Drop GlassShower L ight• Torsion Springs pull trim tightto ceiling
ERT551High Gloss ApplianceWhiteTrim with Frosted Lens
Frosted Glass LensShower L ight• Torsion Springs pull trim tightto ceiling
6-1/2"[165mm]
6-1/2"[165mm]
5-1/2"[140mm]
COOPER LIGHTING
ALL-PROTrims For ET500, ET500R, EI500AT, EI500RAT
29
Fresnel Glass LensShower L ight• Wet location listed for use inshowers
ERT552High Gloss ApplianceWhiteTrimwith Fresnel lens
ET500ET500R
60W A19, 50W PAR30,50W PAR30L, 65W BR30
EI500ATEI500RAT
35W PAR30L
6-1/2"[165mm]
6-1/2"[165mm]
6-1/2"[165mm]
3"[76mm]
ERT530High Gloss ApplianceWhiteTrim withWhite Scoop andBlack Baffle
ERT530WHTHigh Gloss ApplianceWhiteTrim withWhite Scoop andWhite Baffle
Wal l Wash• Torsion Springs pull trimtight to ceiling
ET500ET500R
50W TB19, 60W A19,60W BT15, 60W MB19
ALL-PRO
COOPER LIGHTING30
EI700
6" Ape rtu re
IC Hous ing fo rI n su l a tedCe i l i ngs
6-1/2"[165mm]
7"[178mm]
1/2"[13mm]
7-1/2"[191mm]
10-1/2"[267mm]
The ALL-PRO EI700 housing is designed for use in insulatedceilings where the housing will be in direct contact withinsulation material.
Housing: Aluminum construction for greater heatdissipation.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Plaster Frame: Housing adjusts in plaster frame to accom-modate up to 1-3/4" thick ceilings. Plaster frame includes lockingscrew for securing hanger bars and cutouts for crimping hangerbars in position.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Seven con-duit knockouts are uniform 1/2" size with true pryout slots. Fourpryouts with integral strain relief simplify non-metallicsheathed cable installation.Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.A set screw locks housing in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barclip snaps ontoT-bar spline for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray
Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping.
Labels • UL/cUL listed for direct contact with Insulationand Combustible Material• UL/cUL Listed for FeedThrough• UL/cUL Listed for Damp Location• IP Rated
COOPER LIGHTING
ALL-PRO
31
EI700R
6" Ape rtu re
IC Hous ing fo rI n su l a tedCe i l i ngs
Remode lHous ing
6-7/8"[175mm]
7"[178mm]
1/2"[13mm]
13-1/4"[337mm]
6-1/4"[159mm]
The ALL-PRO EI700R remodel housing is designed forinstallations where the housing will be in direct contact withinsulation.The housing can be installed from below the ceiling.
Housing: Aluminum housing for greater heat dissipation.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief included. Quick-connect wiring connectors included.
Remodel C l ips : Four remodel clips secure housing andaccommodate 1/2" and 5/8" ceiling thickness.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping.
Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact withInsulation and Combustible Material
ALL-PRO
COOPER LIGHTING32
EI700AT
6" Ape rtu re
IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs
6-1/2"[165mm]
7"[178mm]
1/2"[13mm]
7-1/2"[191mm]
10-1/2"[267mm]
The EI700 housing is designed for use in insulated ceilingswhere the housing will be in direct contact with insulation.This housing also meets restricted airflow requirements.
Housing: Aluminum construction for greater heat dissipa-tion. Air-Tite gasket supplied with housing to complete ASTM-E283 installation.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Plaster Frame: Housing adjusts in plaster frame for up to 1"thick ceilings. Plaster frame has locking screw for hanger barsand cutouts for crimping hanger bars in position.
Junct ion Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four pry-outs with integral strain relief for non-metallic sheathed cableinstallation. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow shorten-ing for 12" joists. Integral nail simplifies installation. Bar hang-ers can be repositioned 90° without tools. IntegralT-bar clipsnaps ontoT-bar spline for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protect socket from overspray.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping.
Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andCombustible Material
Meets following restricted air-flow and IC requirements:• Washington State Energy Code• State of CaliforniaTitle 24 Low Efficacy LuminaireIC and AT
• International Energy Conservation Code (IECC)• NewYork State Energy Conservation ConstructionCode (NY-ECCC)
• Certified Under ASTM-E283
COOPER LIGHTING
ALL-PRO
33
EI700RAT
6" Ape rtu re
IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs
Remode lHous ing
The EI700RAT Remodel Housing is designed for installationswhere the housing will be in direct contact with insulation.Thishousing also meets restricted airflow requirements. It can beinstalled from below the ceiling.
Housing: Aluminum housing for greater heat dissipation.Air-Tite gasket pre-installed with housing for a completeASTM-E283 installation.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four NM (non-metallic) cable pryouts with integral strainrelief included. Quick-connect wiring connectors included.
Remodel C l ips : Four remodel clips secure housing andaccommodate 1/2" and 5/8" ceiling thickness.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping.
Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulationand combustible material
Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low EfficacyLuminaire IC and AT Requirement
• Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy ConservationConstruction Code (NY-ECCC)
• Certified Under ASTM-E283
6 7/8"[175mm]
7"[178mm]
1/2"[13mm]
13-1/4"[337mm]
6-1/4"[159mm]
ALL-PRO
COOPER LIGHTING34
EI700ATNB
6" Ape rtu re
IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs
No Socke tB racke t
6-1/2"[165mm]
7-1/2"[191mm]
7"[178mm]
1/2"[13mm]
10-1/2"[267mm]
The ALL-PRO EI700ATNBAIR-TITE housing is designed forinstallations where it will be in direct contact with insulationand it meets restricted air flow requirements. It is designedwithout a socket plate for use with socket supporting trimsonly. There is no need to spend time adjusting or disconnect-ing the socket and removing the socket plate.
Housing: Aluminum construction for greater heat dissipa-tion. Air-Tite gasket supplied with housing to completeASTM-E283 installation.
Plaster Frame: Housing adjusts in plaster frame 1" toaccommodate different ceiling thicknesses.
Junct ion Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain relief.Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks hanger bars in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barclip snaps ontoT-bar spline for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping.
Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulationand combustible material
Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low efficacy LuminaireIC and AT requirement
• Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy ConservationConstruction Code (NY-ECCC)
• Certified Under ASTM-E283
COOPER LIGHTING
ALL-PRO
35
EI700NB
6" Ape rtu re
IC Hous ing fo rI n su l a tedCe i l i ngs
No Socke tB racke t
6-1/2"[165mm]
7-1/2"[191mm]
7"[178mm]
1/2"[13mm]
10-1/2"[267mm]
The ALL-PRO EI700ATNB housing is designed for installationswhere it will be in direct contact with insulation. It is designedwithout a socket plate for use with socket supporting trimsonly. There is no need to spend time adjusting ordisconnecting the socket and removing the socket plate.
Housing: Aluminum construction for greater heat dissipa-tion.
Plaster Frame: Housing adjusts in plaster frame 1-3/4" toaccommodate different ceiling thicknesses.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Sevenconduit knockouts are uniform 1/2" size with true pryout slots.Four “NM” (non-metallic) cable pryouts with integral strain re-lief. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks housing in position. Score lines allow field shorten-ing for 12" joists. Integral nail simplifies installation. Bar hang-ers can be repositioned 90° without tools. IntegralT-bar clipsnaps ontoT-bar spline for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping.
Labels • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material
ALL-PRO
COOPER LIGHTING
Specular Ref lector• Coil Spring retention
EI700EI700AT
75W R30, 65W BR30,50W PAR30, 75W PAR30L
EI700REI700RAT
50W PAR30, 75W PAR30L,65W BR30, 75W R30
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
40W A19, 65W BR30,75W PAR30,75W PAR30L,
75W R30, 90W BR40
Trims For EI700, EI700R, EI700AT, EI700RAT,EI700ATNB, EI700NB
ERT710GHigh Gloss ApplianceWhiteTrimwith Gold Reflector
ERT710High Gloss ApplianceWhiteTrimwith Clear Specular Reflector
White Ref lector• Socket supporting trim• ERT712 -Friction clip retention• ERT712TS -Torsion spring retention
ERT712TSHigh Gloss ApplianceWhiteTrimwithWhite Reflector andTorsionSpring Construction
ERT712High Gloss ApplianceWhiteTrimwithWhite reflector
36
2-7/8"[73mm]
7-1/4"[184mm]
ERT712
ERT712TS
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
COOPER LIGHTING
ALL-PROTrims For EI700, EI700R, EI700AT, EI700RAT,
EI700ATNB, EI700NB
37
EI700EI700ATEI700R
EI700RAT
50W PAR30, 65W BR30,75W R30, 75W PAR30L
EI700EI700ATEI700R
EI700RAT
40W A19, 65W BR30,75W PAR30, 75W PAR30L,
90W BR40
ERT707High Gloss ApplianceWhiteTrimwith Black Baffle
Metal Baff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim
ERT707WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
8"[203mm]
2-7/8"[73mm]
ERT713High Gloss ApplianceWhiteTrimwith Black Baffle
ERT713TSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction
Black Meta l Baff le• Socket supporting trim• ERT713 -Friction clip retention• ERT713TS -Torsion spring retention
ERT713TS
ERT713
7-1/4"[184mm]
7-1/4"[184mm]
5"[127mm]
5"[127mm]
ALL-PRO
COOPER LIGHTING38
ERT713WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle
ERT713WHTTSHigh Gloss ApplianceWhiteTrimwithWhite Baffle andTorsionSpring Construction
Metal Baff le• Socket supporting trim• ERT713WHT - Friction clipretention• ERT713WHTTS -Torsionspring retention
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
40W A19, 65W BR30,75W PAR30,75W PAR30L,
75W R30, 90W BR40
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
75W BR40,65W BR30, 75W PAR30L
ERT713WHTTS
ERT713WHT
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
ERT713LTS
ERT713L
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
ERT713LHigh Gloss ApplianceWhiteTrimwith Black Baffle
ERT713LTSHigh Gloss ApplianceWhiteTrim with Black Baffle andTor-sion Spring Construction
Black Meta l Baff le• Provides deeper lamp re-gression for BR lamps• ERT713LTS -Torsion spring retention• ET713L -Friction clip retention
Trims For EI700, EI700R, EI700AT, EI700RAT,EI700ATNB, EI700NB
COOPER LIGHTING
ALL-PRO
39
ERT714High Gloss ApplianceWhiteTrimwith Black Baffle
ERT714WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
Plast ic Baff le• Coil spring retention
EI700EI700ATEI700R
EI700RAT
50W PAR30,65W BR30,75W PAR30L
8"[203mm]
2-1/4"[136mm]
ERT704High Gloss ApplianceWhiteTrimwithWhite Eyeball
ERT704PBPolished BrassTrim withPolished Brass Eyeball
Eyebal l• Torsion springs pull trimtight to ceiling
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
75W BR40,65W BR30,75W PAR30L
Aperture:3-15/16"[100mm]
OD:8" [203mm]
ERT711High Gloss ApplianceWhiteTrimand Eyeball with Black Baffle
Regressed Eyebal l
EI700EI700AT
50W PAR30
EI700NBEI700ATNB
65W BR30,75W R30
8"[203mm]
3" [76mm]
Trims For EI700, EI700R, EI700AT, EI700RAT,EI700ATNB, EI700NB
ALL-PRO
COOPER LIGHTING40
Aperture:3-7/8" [98mm]
OD:8" [203mm]
Open• Coil Spring retention
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
65W BR30,75W PAR30.75W PAR30L
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
50W PAR30L, 65W BR30
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
40W A19
ERT721High Gloss ApplianceWhiteTrimwith Frosted Lens
Shower L ight withFrosted Glass Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers
8"[203mm]
4-1/4"[108mm]
ERT725High Gloss ApplianceWhiteTrimwith Black Baffle
ERT725TSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction
Black Meta l Baff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ERT725 -Friction clip retention•ERT725TS -Torsion spring retention
Height:5-3/8" [136mm]OD:7-1/4" [184mm]
ERT725TSERT725
ERT705High Gloss ApplianceWhiteTrim
Trims For EI700, EI700R, EI700AT, EI700RAT,EI700ATNB, EI700NB
COOPER LIGHTING
ALL-PRO
41
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
40W A19, 50W PAR30L,65W BR30,75W PAR30L
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
40W A19,65W BR30,75W PAR30L75W PAR30L
EI700EI700ATEI700R
EI700RATEI700NB
EI700ATNB
40W A19
ERT725WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
ERT725WHTTSHigh Gloss ApplianceWhiteTrimwithWhite Baffle andTorsion Spring Construction
White Meta l Baff le/Splay• Combination baffle/splay trim• Socket Supporting trim• ET725WHT -Friction clip retention• ERT725WHTTS -Torsion spring retention
ERT725WHTTS
ERT725WHT
7-1/4"[184mm]
5-3/8"[136mm]
7-1/4"[184mm]
5-3/8"[136mm]
ERT716High Gloss ApplianceWhiteTrimwithWhite Baffle
Shal low Meta l Baff le• Socket Supporting trim• Friction clip retention
8"[203mm]
4-1/4"[108mm]
ERT723High Gloss ApplianceWhiteTrimwith Glass Fresnel Lens
Shower L ight with GlassFresnel Lens andRef lector• Torsion springs pull trim tightto ceiling• Wet location listed for use inshowers• Socket supporting trim
8"[203mm]
4-1/4"[108mm]
Trims For EI700, EI700R, EI700AT, EI700RAT,EI700ATNB, EI700NB
ALL-PRO
COOPER LIGHTING42
ET700
6" Ape rtu re
Non - IC Hous ingfo r Use InUn insu l a tedCe i l i ngs
Any Insu l a t i onP resen t Mus t BeKep t 3 " FromHous ing
6-1/2"[165mm]
7"[178mm]
1/2"[13mm]
7-1/2"[191mm]
10-1/2"[267mm]
The ALL-PRO ET700 is designed for use in non-insulated ceilingsin residential and commercial applications. If ceiling insulationis present, it must be kept 3" from all sides of the fixture.
Housing: Die-stamped 20 gauge CRS with white powder coatfinish.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Plaster Frame: Housing adjusts in plaster frame toaccommodate ceilings up to 1-3/4" thick. Includes locking screwand cutouts for crimping hanger bars in position.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Seven con-duit knockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barspline snaps ontoT-bar for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray
Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improperlamping or misapplied insulation.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• IP Rated
COOPER LIGHTING
ALL-PRO
43
ET700R
6" Ape rtu re
Non - IC Hous -i ng fo r Use InUn insu l a tedCe i l i ngs
Any Insu l a t i onP resen t Mus tBe Kep t 3 "From Hous ing
7"[178mm]
1/2"[13mm]
6 7/8"[175mm]
13 1/4"[337mm]
6-1/4"[159mm]
The ALL-PRO ET700R remodel housing is designed for use innon-insulated existing ceilings. If ceiling insulation is present, itmust be kept 3" from the fixtures on all sides.The ET700R canbe installed from below the ceiling.
Housing: Die-stamped 20 gauge CRS with white powder coatfinish.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief included. Quick-connect wiring connectors included.
Remodel C l ips ; Four remodel clips secure housing andaccommodate 1/2" and 5/8" ceiling thickness.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : Self resetting thermal protectordeactivates fixture if overheating occurs due to improper lamp-ing or misapplied insulation.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• IP Rated
ALL-PRO
COOPER LIGHTING
Trims For ET700, ET700R
44
Specular Ref lector• Coil Spring retention
ET70065W BR30, 75W R30,
75W PAR30, 150W R40,150W PAR38
ET700R65W BR30, 75W R30,
75W PAR30,75W PAR30L, 150W R40
ET70085W BR30, 120W BR40,100W R30, 75W PAR30L,
100W A19
ET700R 65W BR30, 75W PAR30L
ERT710GHigh Gloss ApplianceWhiteTrimwith Gold Reflector
ERT710High Gloss ApplianceWhiteTrimwith Clear Specular Reflector
White Ref lector• Socket supporting trim• ERT712 -Friction clip retention• ERT712TS -Torsion spring retention
ERT712TSHigh Gloss ApplianceWhiteTrimwithWhite reflector andTorsionSpring Construction
ERT712High Gloss ApplianceWhiteTrimwithWhite reflector
2-7/8"[73mm]
7-1/4"[184mm]
ERT712
ERT712TS
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
COOPER LIGHTING
ALL-PROTrims For ET700, ET700R
45
ET700 65W BR30, 75W R30,75W PAR30
ET700R
65W BR30, 75W R30,75W PAR30,75W PAR30L,
120W BR40, 150W R40
ERT707High Gloss ApplianceWhiteTrimwith Black Baffle
Metal Baff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim
ERT707WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
8"[203mm]
2-7/8"[73mm]
ET700 120W R40, 120W PAR38ERT709High Gloss ApplianceWhiteTrimwith Black Baffle
Large Aperture Meta lBaff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim
ERT709WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
8"[203mm]
2-5/8"[67mm]
ALL-PRO
COOPER LIGHTING
Trims For ET700, ET700R
46
ERT713High Gloss ApplianceWhiteTrimwith Black Baffle
ERT713TSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction
Black Meta l Baff le• Socket supporting trim• ERT713 -Friction clip retention• ERT713TS -Torsion spring retention
ERT713TS
ERT713
7-1/4"[184mm]
7-1/4"[184mm]
5"[127mm]
5"[127mm]
ET70075W PAR30L, 85W BR30,100W R30, 100W A19,
120W BR40
ET700R 65W BR30, 75W PAR30L
ET70075W PAR30L, 85W BR30,100W R30, 100W A19,
120W BR40
ET700R 65W BR30, 75W PAR30L
ERT713WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle
ERT713WHTTSHigh Gloss ApplianceWhiteTrimwithWhite Baffle andTorsionSpring Construction
Metal Baff le• Socket supporting trim• ERT713WHT - Friction clipretention• ERT713WHTTS -Torsionspring retention
ERT713WHTTS
ERT713WHT
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
COOPER LIGHTING
ALL-PROTrims For ET700, ET700R
47
ET700
75W A19, 75W PAR30L,75W PAR30, 85W BR30,100W R30, 120W BR40,
150W R40
ET700R 65W BR30, 75W PAR30L,150W R40
ET700 75W R30, 75W PAR30,75W PAR30L, 85W BR30
ET700R 75W R30, 75W PAR30L,85W BR30
ERT713LTS
ERT713L
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
ERT713LHigh Gloss ApplianceWhiteTrimwith Black Baffle
ERT713LTSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction
Black Meta l Baff le• Provides deeper lamp re-gression for BR lamps• ET713L -Friction clip retention• ERT713LTS -Torsion spring retention
Plast ic Baff le• Coil spring retention
ERT714High Gloss ApplianceWhiteTrimwith Black Baffle
ERT714WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
8"[203mm]
2-1/4"[136mm]
ALL-PRO
COOPER LIGHTING
Trims For ET700, ET700R
48
ERT717High Gloss ApplianceWhiteTrim with Black Baffle
ERT717WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle
Large Aperture Plast icBaff le• Coil spring retention
ET700 150W PAR30, 150W R40
ET700R 150W R40
8"[203mm]
2-3/4"[70mm]
ET700ET700R
40W A19, 65W BR30,75W PAR30L, 75W PAR30L
ET700ET700R
75W R30, 75W PAR30,75W PAR30L
ERT716High Gloss ApplianceWhiteTrim withWhite Baffle
Shal low Meta l Baff le• Socket Supporting trim• Friction clip retention
8"[203mm]
4-1/4"[108mm]
ERT704High Gloss ApplianceWhiteTrim withWhite Eyeball
ERT704PBPolished BrassTrim withPolished Brass Eyeball
Eyebal l• Torsion springs pull trimtight to ceiling
Aperture:3-15/16"[100mm]
OD:8" [203mm]
COOPER LIGHTING
ALL-PRO
49
Trims For ET700, ET700R
ET70065W BR30, 75W R30,
75W PAR30
ET700R 65W R30, 75W R30,75W PAR30, 75W PAR30L
ET700 65W BR30, 75W R30,75W PAR30
ET700ET700R
40W A19, 65W BR30,75W PAR30L, 75W PAR30L
ERT711High Gloss ApplianceWhiteTrimand Eyeball with Black Baffle
Regressed Eyebal l
8"[203mm]
3" [76mm]
ERT706High Gloss ApplianceWhiteTrim
Open• Coil spring retention
Aperture:3-7/8" [98mm]
OD:8" [203mm]
ERT708High Gloss ApplianceWhiteTrim
Large Aperture Open• Coil Spring Retention
ET700ET700R
120W BR40, 150W R40
Aperture:5-3/16"[131mm]
OD:8" [203mm]
ERT701High Gloss ApplianceWhiteTrimwith Albalite Lens
Albal i te Lens ShowerL ight• Wet Location listed for use inshowers• Torsion spring retention
8"[203mm]
ALL-PRO
COOPER LIGHTING
ET700ET700R
60W A19
Trims For ET700, ET700R
50
Drop Opal P last ic LensShower L ight• Wet Location listed for use inshowers• Torsion spring retention
ERT702High Gloss ApplianceWhiteTrimwith Drop Opal Lens
8"[203mm]
ERT703High Gloss ApplianceWhiteTrimwith Fresnel lens
Fresnel Lens ShowerL ight• Wet Location listed for usein showers
ET700ET700R
60W A19
ET700ET700R
65W BR30, 75W R30,75W PAR30, 75W PAR30L
8"[203mm]
ERT705WhiteTrim
Open• Coil Spring retention• Fixed socket position
Aperture:3-7/8"[98mm]
OD:8" [203mm]
COOPER LIGHTING
ALL-PRO
Trims For ET400, ET400R, EI400AT
51
ET700ET700R
60W A19
ERT721High Gloss ApplianceWhiteTrimwith Frosted Lens
Shower L ight withFrosted Glass Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers
4-1/4"[108mm]
4-1/4"[108mm]
8"[203mm]
8"[203mm]
ERT723High Gloss ApplianceWhiteTrimwith Glass Fresnel Lens
Shower L ight withGlass Fresnel Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers• Socket supporting trim
ET700ET700R
60W A19
ALL-PRO
COOPER LIGHTING
Trims For ET700, ET700R
52
ET700ET700R
50W PAR30L, 85W BR30,90W A19, 100W R30
ERT725TSHigh Gloss ApplianceWhiteTrim with Black Baffle andTorsion Spring Construction
ERT725High Gloss ApplianceWhiteTrim with Black Baffle
Black Meta l Baff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ERT725 - Friction clipretention• ERT725TS -Torsion springretention
ERT725
ERT725TS
5-3/8"[136mm]
5-3/8"[136mm]
7-1/4"[184mm]
7-1/4"[184mm]
COOPER LIGHTING
ALL-PROTrims For ET700, ET700R
53
ET700ET700R
50W PAR30L, 85W BR30,90W A19, 100W R30
ERT725WHTTS
ERT725WHT
5-3/8"[136mm]
5-3/8"[136mm]
7-1/4"[184mm]
7-1/4"[184mm]
ERT725WHTTSHigh Gloss ApplianceWhiteTrimwithWhite Baffle andTorsionSpring Construction
ERT725WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
White Meta lBaff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ET725WHT - Friction clipretention• ERT725WHTTS -Torsionspring retention
ALL-PRO
COOPER LIGHTING54
EI700U
6" Ape rtu re
IC Hous ing fo rI n su l a tedCe i l i ngs
9-1/2"[241mm]
13"[330mm]6-1/2"
[165mm]
7-1/2"[199mm]
1/2"[13mm]
6-3/4"[171mm]
The ALL-PRO EI700U housing is designed to be used in directcontact with insulation.The All-Pro EI700U housing is suited foruse in insulated ceilings in residential and commercial applica-tions.The IC construction allows an unbroken insulation barrierto be maintained.
Housing: Double wall aluminum construction for greater heatdissipation. Double wall housing allows higher wattages onselect trims than single wall IC housing.
Socket P late : Fixed socket plate maintains consistent lampposition.
Plaster Frame: Housing adjusts in plaster frame 1" toaccommodate different ceiling thicknesses.
Junct ion Box: Listed for through branch circuit wiring. Ac-commodates straight conduit runs. Seven conduit knockoutsare uniform 1/2" size with true pryout slots. Four “NM” (non-metallic) cable pryouts with integral strain relief also included.Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks housing in position. Score lines allow shortening for12" joists. Integral nail simplifies installation. Bar hangers canbe repositioned 90° without tools. IntegralT-bar spline snapsontoT-bar for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material
COOPER LIGHTING
ALL-PRO
55
EI700UAT
6" Ape rtu re
IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs
9-1/2"[241mm]
13"[330mm]6-1/2"
[165mm]
7-1/2"[199mm]
1/2"[13mm]
6-3/4"[171mm]
The ALL-PRO EI700UAT housing is designed for use in directcontact with insulation. The IC construction allows an unbrokeninsulation barrier to be maintained and the AIR-TITE constructionmeets restricted airflow requirements.
Housing: Double wall aluminum construction for greater heatdissipation. Double wall housing allows higher wattages on se-lect trims than single wall housing. Air-Tite gasket pre-installedfor ASTM-E283 compliance.
Socket P late : Fixed socket plate maintains consistent lampposition.
Plaster Frame: Housing adjusts in plaster frame 1" toaccommodate different ceiling thicknesses.
Junct ion Box: Listed for through branch circuit wiring. Ac-commodates straight conduit runs. Seven conduit knockouts are1/2" with true pryout slots. Four “NM” (non-metallic) cable pry-outs with integral strain relief. Quick-connect wiring connectors.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks housing in position. Score lines allow shortening for12" joists. Integral nail simplifies installation. Bar hangers canbe repositioned 90° without tools. IntegralT-bar spline snapsontoT-bar for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : Self resetting thermal protector deacti-vates fixture if overheating occurs due to improper lamping.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material
Meets following restricted air-flow and IC requirements:• State of CaliforniaTitle 24 Low Efficacy Luminaire
IC and AT requirement• Washington State Energy Code• International Energy Conservation Code (IECC)• NewYork State Energy Conservation ConstructionCode (NY-ECCC)
• Certified Under ASTM-E283
ALL-PRO
COOPER LIGHTING
Trims For EI700U, EI700UAT
56
Specular Ref lector• Coil Spring retention
EI700UEI700UAT
75W PAR30, 75W PAR30L,85W BR30, 90W BR40,100W R30, 100W R40,
100W PAR38
EI700UEI700UAT
60WA19, 75W PAR30,75W PAR30L, 85WBR30, 100W R30,120W BR40
ERT710GHigh Gloss ApplianceWhiteTrimwith Gold Reflector
ERT710High Gloss ApplianceWhiteTrimwith Clear Specular Reflector
White Ref lector• Socket supporting trim• ERT712 -Friction clip retention• ERT712TS -Torsion spring retention
ERT712TSHigh Gloss ApplianceWhiteTrimwithWhite reflector andTorsionSpring Construction
ERT712High Gloss ApplianceWhiteTrimwithWhite reflector
2-7/8"[73mm]
7-1/4"[184mm]
ERT712
ERT712TS
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
COOPER LIGHTING
ALL-PROTrims For EI700U, EI700UAT
57
EI700UEI700UAT
65W BR30, 75W R30,75W PAR30, 75W PAR30L,90W PAR38, 90W BR40,
100W R40
EI700UEI700UAT
90W BR40
ERT707High Gloss ApplianceWhiteTrim with Black Baffle
Metal Baff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim
ERT707WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle
8"[203mm]
2-7/8"[73mm]
ERT709High Gloss ApplianceWhiteTrim with Black Baffle
Large Aperture Meta lBaff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim
ERT709WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle
8"[203mm]
2-5/8"[67mm]
ALL-PRO
COOPER LIGHTING58
ERT713High Gloss ApplianceWhiteTrim with Black Baffle
ERT713TSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction
Black Meta l Baff le• Socket supporting trim• ERT713 -Friction clip retention• ERT713TS -Torsion spring retention
ERT713TS
ERT713
7-1/4"[184mm]
7-1/4"[184mm]
5"[127mm]
5"[127mm]
ERT713WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle
ERT713WHTTSHigh Gloss ApplianceWhiteTrimwithWhite Baffle andTorsionSpring Construction
Metal Baff le• Socket supporting trim• ERT713WHT - Friction clipretention• ERT713WHTTS -Torsionspring retention
ERT713WHTTS
ERT713WHT
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
Trims For EI700U, EI700UAT
EI700UEI700UAT
60W A19, 75W PAR30,75W PAR30L, 85W BR30,
120W BR40
EI700UEI700UAT
60W A19, 75W PAR30,75W PAR30L, 85W BR30,100W R30, 120W BR40
COOPER LIGHTING
ALL-PRO
59
ERT713LTS
ERT713L
7-1/4"[184mm]
7-1/4"[184mm]
5-3/8"[136mm]
5-3/8"[136mm]
ERT713LHigh Gloss ApplianceWhiteTrimwith Black Baffle
ERT713LTSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction
Black Meta l Baff le• Provides deeper lamp re-gression for BR lamps• ET713L -Friction clip retention• ERT713LTS -Torsion spring retention
Plast ic Baff le• Coil spring retention
ERT714High Gloss ApplianceWhiteTrimwith Black Baffle
ERT714WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
8"[203mm]
2-1/4"[136mm]
Trims For EI700U, EI700UAT
EI700UEI700UAT
40W A19, 75W PAR30,75W PAR30L, 85W BR30,
120W BR40
EI700UEI700UAT
65W BR30, 75W PAR30,75W PAR30L
ALL-PRO
COOPER LIGHTING60
ERT704High Gloss ApplianceWhiteTrim withWhite Eyeball
ERT704PBPolished BrassTrim withPolished Brass Eyeball
Eyebal l• Torsion springs pull trimtight to ceiling
Aperture:3-15/16"[100mm]
OD:8" [203mm]
ERT708High Gloss ApplianceWhiteTrim
Large Aperture Open• Coil Spring Retention
Aperture:5-3/16"[131mm]
OD:8" [203mm]
ERT701High Gloss ApplianceWhiteTrimwith Albalite Lens
Albal i te Lens ShowerL ight• Wet Location listed for usein showers• Torsion spring retention
Trims For EI700U, EI700UAT
EI700UEI700UAT
75W PAR30,75W PAR30L,
85W BR30, 100W R30
EI700UEI700UAT
100W R40 (RequiresH1999 Socket Extender)
EI700UEI700UAT
40W A19
8"[203mm]
COOPER LIGHTING
ALL-PRO
61
Trims For EI700U, EI700UAT
Drop Opal P last ic LensShower L ight• Wet Location listed for use inshowers• Torsion spring retention
ERT702High Gloss ApplianceWhiteTrimwith Drop Opal Lens
8"[203mm]
ERT703High Gloss ApplianceWhiteTrimwith Fresnel lens
Fresnel Lens ShowerL ight• Wet Location listed for usein showers
8"[203mm]
ERT705WhiteTrim
Open• Coil Spring retention• Fixed socket position
8"[203mm]
EI700UEI700UAT
75W PAR30, 75WPAR30L, 85W BR30,
100W R30
EI700UEI700UAT
40W A19
EI700UEI700UAT
40W A19
ALL-PRO
COOPER LIGHTING62
EI700UEI700UAT
60W A19
ERT721High Gloss ApplianceWhiteTrimwith Frosted Lens
Shower L ight withFrosted Glass Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers
4-1/4"[108mm]
4-1/4"[108mm]
8"[203mm]
8"[203mm]
ERT723High Gloss ApplianceWhiteTrimwith Glass Fresnel Lens
Shower L ight withGlass Fresnel Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers• Socket supporting trim
EI700UEI700UAT
60W A19
Trims For EI700U, EI700UAT
COOPER LIGHTING
ALL-PRO
63
Trims For EI700U, EI700UAT
EI700UEI700UAT
40W A19, 75W PAR30L,85W BR30, 100W R30
ERT725TSHigh Gloss ApplianceWhiteTrimwith Black Baffle andTorsionSpring Construction
ERT725High Gloss ApplianceWhiteTrimwith Black Baffle
Black Meta l Baff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ERT725 - Friction clipretention• ERT725TS -Torsion springretention
ERT725
ERT725TS
5-3/8"[136mm]
5-3/8"[136mm]
7-1/4"[184mm]
7-1/4"[184mm]
EI700UEI700UAT
60W A19, 75W PAR30L,85W BR30, 100W R30
ERT725WHTTS
ERT725WHT
5-3/8"[136mm]
5-3/8"[136mm]
7-1/4"[184mm]
7-1/4"[184mm]
ERT725WHTTSHigh Gloss ApplianceWhiteTrimwithWhite Baffle andTorsionSpring Construction
ERT725WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
White Meta lBaff le/Splay• Combination baffle/splaytrim• Socket Supporting trim• ET725WHT - Friction clipretention• ERT725WHTTS -Torsionspring retention
ALL-PRO
COOPER LIGHTING64
EI2700
6" Ape rtu re
IC Hous ing fo rI n su l a tedCe i l i ngs
Fo r Sha l l owCe i l i ngs
7-1/2"[191mm]
5"[127mm]
6-1/2" [140mm]1/2"[12mm]
10-1/2"[267mm]
The ALL-PRO EI2700 housing is designed for use in shallowceilings where 2"x6" joist construction is used. It is also de-signed for shallow ceilings where insulation is present andwhere the housing will be in direct contact with insulation.
Housing: Aluminum housing for greater heat dissipation.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Plaster Frame: Housing adjusts in plaster frame 1-3/8" toaccommodate different ceiling thicknesses.
Junct ion Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allowhousing to be positioned at any point within a 24" joist span.A set screw locks bar hangers in position. Score lines allowshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barclip snaps ontoT-bar spline for quick alignment.
Socket ; Porcelain socket with nickel plated brass screwshell. Shipping insert protects socket against overspray.
Thermal Protector : IntegralThermal Protector deactivatesfixture if an incorrect lamp is used.
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material
COOPER LIGHTING
ALL-PRO
65
EI2700R
6" Ape rtu re
IC Hous ing fo rI n su l a tedCe i l i ngs
Fo r Sha l l owCe i l i ngs
6-7/8"[175mm]
13-1/4"[337mm]
5"[127mm]
1/2"[13mm]
6-1/4"[159mm]
The ALL-PRO EI2700R housing is designed for remodeling usein shallow ceilings where 2" x 6" joist construction is used. It isalso designed for use where insulation is present and where thehousing will be in direct contact with insulation.The EI2700Rcan be installed from below the ceiling.
Housing: Aluminum housing for greater heat dissipation.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief are included. Quick-connect wiring connectors in-cluded.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : IntegralThermal Protector deactivatesfixture if an incorrect lamp is used.
Remodel C l ips : Four remodel clips secure housing and ac-commodate 1/2" and 5/8" ceiling thickness.
Labels : • UL/cUL listed for direct contact with insulation andcombustible material
• UL/cUL Listed for FeedThrough• UL/cUL Listed for Damp Location
ALL-PRO
COOPER LIGHTING66
EI2700AT
6" Ape rtu re
IC A IR -T ITEHous ing fo rI n su l a tedCe i l i ngs
Fo r Sha l l owCe i l i ngs
7-1/2"[191mm]
5"[127mm]
6-1/2"[140mm]
1/2"[12mm]
10-1/2"[267mm]
The ALL-PRO EI2700AT housing is designed for use in shallowceilings where 2" x 6" joist construction is used. It is alsodesigned for use where insulation is present and where thehousing will be in direct contact with insulation. The EI2700AThousing has AIR-TITE construction and meets restricted airflowrequirements.
Housing: Aluminum housing for greater heat dissipation. Air-Tite gasket supplied with housing to complete ATM-E283 in-stallation.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Plaster Frame: Housing adjusts in plaster frame 1" toaccommodate different ceiling thicknesses.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Seven con-duit knockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-Barhangers fit ontoT-Bar spline for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket against overspray.
Thermal Protector : IntegralThermal Protectordeactivates fixture if an incorrect lamp is used.
COOPER LIGHTING
ALL-PRO
67
Labels : • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact withInsulation and combustible material
Meets following restricted air-flow and IC requirements:
• Washington State Energy Code• State of CaliforniaTitle 24 Low EfficacyLuminaire IC and AT requirement
• International Energy ConservationCode (IECC)
• NewYork State Energy ConservationConstruction Code (NY-ECCC)
• Certified Under ASTM-E283
ALL-PRO
COOPER LIGHTING
Trims For EI2700, EI2700R, EI2700AT
68
Specular Ref lector• Coil Spring retention
EI2700EI2700ATEI2700R
50W PAR30, 65W BR30,75W R30, 75W PAR30L
ERT710GHigh Gloss ApplianceWhiteTrimwith Gold Reflector
ERT710High Gloss ApplianceWhiteTrimwith Clear Specular Reflector
2-7/8"[73mm]
7-1/4"[184mm]
ERT707High Gloss ApplianceWhiteTrim with Black Baffle
Metal Baff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim
ERT707WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
8"[203mm]
2-7/8"[73mm]
EI2700EI2700AT
50W PAR30, 65W BR30,75W PAR30L
EI2700R 65W BR30, 75W PAR30L
COOPER LIGHTING
ALL-PROTrims For EI2700. EI2700R, EI2700AT
69
Plast ic Baff le• Coil spring retention
ERT714High Gloss ApplianceWhiteTrimwith Black Baffle
ERT714WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
8"[203mm]
2-1/4"[136mm]
EI2700EI2700ATEI2700R
65W BR30, 75W PAR30,75W PAR30L
ERT716High Gloss ApplianceWhiteTrimwithWhite Baffle
Shal low Meta l Baff le• Socket Supporting trim• Friction clip retention
8"[203mm]
4-1/4"[108mm]
EI2700EI2700AT
65W BR30, 50W PAR30,75W PAR30L
EI2700R 50W PAR30, 60W BR30
ALL-PRO
COOPER LIGHTING
Trims For EI2700. EI2700R, EI2700AT
70
ERT704High Gloss ApplianceWhiteTrim withWhite Eyeball
ERT704PBPolished BrassTrim withPolished Brass Eyeball
Eyebal l• Torsion springs pull trimtight to ceiling
Aperture:3-15/16"[100mm]
OD:8" [203mm]
ERT705WhiteTrim
Open• Coil Spring retention• Fixed socket position
8"[203mm]
EI2700EI2700AT
65W BR30, 75W R30,75W PAR30L
EI2700R 65W BR30, 75W R30,75W PAR30L
EI2700EI2700AT
50W PAR30L, 60W BR30,75W PAR30
EI2700R 60W BR30
COOPER LIGHTING
ALL-PROTrims For EI2700. EI2700R, EI2700AT
71
ERT721High Gloss ApplianceWhiteTrimwith Frosted Lens
Shower L ight withFrosted Glass Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers
4-1/4"[108mm]
4-1/4"[108mm]
8"[203mm]
8"[203mm]
ERT723High Gloss ApplianceWhiteTrimwith Glass Fresnel Lens
Shower L ight withGlass Fresnel Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers• Socket supporting trim
EI2700EI2700AT
35W PAR30L
EI2700R 40W A19
EI2700EI2700AT
35W PAR30L
EI2700R 40W A19
ALL-PRO
COOPER LIGHTING72
ET2700
6" Ape rtu re
Non - IC Fo r Non -i n su l a ted Ce i l -i ngs
Fo r Sha l l owCe i l i ngs
Insu l a t i on Mus tBe Kep t 3 " FromHous ing
7-1/2"[191mm]
5"[127mm]
1/2"[13mm]
6-1/2"[140mm]
10-1/2"[267mm]
The ALL-PRO ET2700 housing is designed for use in shallowceilings where 2" x 6" joist construction is used. The ET2700 isdesigned for non-insulated shallow ceilings. If ceilinginsulation is present, it must be kept 3" from the fixtures on allsides.
Housing: Die-stamped 20 gauge CRS with white powder coatfinish.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Plaster Frame: Housing adjusts in plaster frame 1-3/8" toaccommodate different ceiling thicknesses. Includeslocking screws for hanger bars and cutouts for crimpinghanger bars in position.
Junct ion Box: Listed for through branch circuit wiring.Positioned to accommodate straight conduit runs. Seven con-duit knockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain relief.Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow shorten-ing for 12" joists. Integral nail simplifies installation. Bar hang-ers can be repositioned 90° without tools. IntegralT-bar clipsnaps ontoT-bar spline for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell,snaps into trim for consistent lamp positioning. Shipping insertprotects socket from overspray.
Thermal Protector : IntegralThermal Protector deactivatesfixture if an incorrect lamp is used or if ceiling insulation mate-rial is not applied correctly.
Labels : • UL/cUL Damp Location Listed• UL/cUL Listed for FeedThrough
COOPER LIGHTING
ALL-PRO
73
ET2700R
6" Ape rtu re
Non - IC Remode lHous ing fo r Non -i n su l a tedCe i l i ngs
Fo r Sha l l owCe i l i ngs
Insu l a t i on Mus tBe Kep t 3 " FromHous ing
6-7/8"[175mm]
13-1/4"[337mm]
5"[127mm]
1/2"[13mm]
6-1/4"[159mm]
The ALL-PRO ET2700R housing is designed for remodeling usein shallow ceilings where 2" x 6" joist construction is used. TheET2700R is designed for use in ceiling where there is no insula-tion. If ceiling insulation is present, it must be kept 3" from thefixtures on all sides.
Housing: Die-stamped 20 gauge CRS with white powder coatfinish.
Socket P late : Rigid socket plate adjusts and locks withouttools for various lamp sizes.
Junct ion Box: Listed for through branch circuit wiring.Seven conduit knockouts are uniform 1/2" size with true pryoutslots. Four “NM” (non-metallic) cable pryouts with integralstrain relief are included. Quick-connect wiring connectors in-cluded.
Socket : Porcelain socket with nickel plated brass screw shell.Shipping insert protects socket from overspray.
Thermal Protector : IntegralThermal Protector deactivatesfixture if an incorrect lamp is used or if ceiling insulationmaterial is not applied correctly.
Remodel C l ips : Four remodel clips secure housing andaccommodate ceiling thicknesses from 1/2" to 5/8".
Labels : • UL/cUL listed for Damp Location• UL/cUL listed for FeedThrough
COOPER LIGHTING
ET270075W PAR30,
75W PAR30L, 85W BR30,100W R30
ET2700R65W BR30, 75W R30,
75W PAR30,75W PAR30L, 85W BR30
74
ALL-PROTrims For ET2700, ET2700R
Specular Ref lector• Coil Spring retention
ERT710GHigh Gloss ApplianceWhiteTrimwith Gold Reflector
ERT710High Gloss ApplianceWhiteTrimwith Clear Specular Reflector
2-7/8"[73mm]
7-1/4"[184mm]
ERT707High Gloss ApplianceWhiteTrim with Black Baffle
Metal Baff le• Coil spring retention• Two trim rings (narrow andwide), supplied with trim
ERT707WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
8"[203mm]
2-7/8"[73mm]
ET2700ET2700R
65W BR30, 75W R30,75W PAR30, 75W PAR30L
COOPER LIGHTING 75
ALL-PROTrims For ET2700, ET2700R
Plast ic Baff le• Coil spring retention
ERT714High Gloss ApplianceWhiteTrimwith Black Baffle
ERT714WHTHigh Gloss ApplianceWhiteTrim withWhite Baffle
8"[203mm]
2-1/4"[136mm]
ET2700ET2700R
40W A19, 65W BR30, 75WPAR30, 75W PAR30L
ERT716High Gloss ApplianceWhiteTrim withWhite Baffle
Shal low Meta l Baff le• Socket Supporting trim• Friction clip retention
8"[203mm]
4-1/4"[108mm]
ET2700 75W R30, 75W PAR30,85W BR30
ET2700R 75W PAR30, 75W PAR30L,85W BR30
ERT704High Gloss ApplianceWhiteTrim withWhite Eyeball
ERT704PBPolished BrassTrim withPolished Brass Eyeball
Eyebal l• Torsion springs pull trimtight to ceiling
Aperture:3-15/16"[100mm]
OD:8" [203mm]
ET2700ET2700R
65W BR30, 75W R30,75W PAR30, 75W PAR30L
ALL-PRO
COOPER LIGHTING
ET2700ET2700R
65W BR30, 75W R30,75W PAR30,75W PAR30L
Trims For ET2700, ET2700R
76
ERT706High Gloss ApplianceWhiteTrim
Open• Coil spring retention
Aperture:3-7/8"[98mm]
OD:8" [203mm]
ERT708High Gloss ApplianceWhiteTrim
Large Aperture Open• Coil spring retention
ET2700 120W BR40, 150W R40
Aperture:3-7/8"[98mm]
OD:8" [203mm]
ERT701High Gloss ApplianceWhiteTrimwith Albalite Lens
Albal i te Lens ShowerL ight• Wet Location listed for use inshowers
ET2700 60W A19
ET2700 60W A19
8"[203mm]
ERT702High Gloss ApplianceWhiteTrimwith Drop Opal Lens
Drop Opal P last ic LensShower L ight• Wet Location listed for usein showers• Torsion spring retention
8"[203mm]
COOPER LIGHTING
ALL-PROTrims For ET2700, ET2700R
77
ET2700 60W A19 ERT703High Gloss ApplianceWhiteTrimwith Glass Fresnel lens
Fresnel Lens ShowerL ight• Wet Location listed for use inshowers• Torsion spring retention
8"[203mm]
ERT721High Gloss ApplianceWhiteTrimwith Frosted Lens
Shower L ight withFrosted Glass Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers
4-1/4"[108mm]
4-1/4"[108mm]
8"[203mm]
8"[203mm]
ERT723High Gloss ApplianceWhiteTrimwith Glass Fresnel Lens
Shower L ight withGlass Fresnel Lens andRef lector• Torsion springs pull trimtight to ceiling• Wet location listed for use inshowers• Socket supporting trim
ET2700R 60W A19
ET2700R 60W A19
ALL-PRO
COOPER LIGHTING78
ET4700
6" Ape rtu re
Non - IC fo rNon - i n su l a tedCe i l i ngs
Insu l a t i on Mus tBe Kep t 3”f romHous ings
Fo r S lope Ce i l i ngs
6-1/2" to 8-3/4"[165 to 222mm]
1/2"[13mm]
6-3/4"[171mm]
14-3/4"[375mm]
10-1/2"[267mm]
5-1/4"[133mm]
TheALL-PRO ET4700 housing is designed for sloped ceiling instal-lations in ceilings ranging from 2/12 to 6/12 pitch.The socket aim-ing mechanism allows the lamp to be aimed straight downregardless of ceiling pitch. It is also designed for use in non-insu-lated ceilings. If insulation is present it must be kept 3" from allsides of the housing.
Housing Features: Thermal protector guards against misuse ofinsulation materials. Telescoping housing for ceiling constructiondown to 2"x 8".With deeper ceilings the telescoping feature pro-vides deeper lamp position. Exclusive socket aimingmechanismswivels and rotates to properly align lamp. Slope indicator pro-vides quick and consistent lamp settings (factory set for 3/12slope).
Junct ion Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain reliefalso included. Quick-connect wiring connectors included.
Bar Hangers : Pre-installed, captive bar hangers allow hous-ing to be positioned at any point within a 24" joist span. A setscrew locks bar hangers in position. Score lines allow fieldshortening for 12" joists. Integral nail simplifies installation. Barhangers can be repositioned 90° without tools. IntegralT-barclip clips ontoT-bar spline for quick alignment.
Socket : Porcelain socket with nickel plated brass screw shell,snaps into trim for consistent lamp positioning. Shipping insertprotects socket from overspray.
Trim: One piece seamless baffle presents a clean finishedappearance.
Listings: • UL/cUL Damp Location Listed• UL/cUL Listed for FeedThrough
COOPER LIGHTING 79
ALL-PROTrims For ET4700
ET4700 90W PAR38
ERT4980High Gloss ApplianceWhiteTrim with Black Baffle
Baff le• One piece seamless baffle• Baffle ridges are parallel tofloor plane
ERT4980WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
Aperture:5-1/4"[133mm]
OD:8" [203mm]
ALL-PRO
COOPER LIGHTING80
EI4700EI4700AT
6" Ape rtu re
IC Insu l a ted Ce i l i ng
E I 470 0AT i sIC A IR -T ITE
Fo r S lope Ce i l i ngs
6-3/4"[171mm]
7-1/8"[181mm]
1/2"[13mm] 10-1/2"
[267mm]
10"[254mm]
14-3/4"[375mm]
5-1/4"[133mm]
Designed for sloped ceiling installations for ceilings from 2/12 to6/12 pitch.The socket aiming mechanism allows the lamp to beaimed straight down regardless of ceiling pitch. EI4700AT issealed and gasketed to limit airflow between attic areas andheated or air conditioned living areas.
Housing Features: Integral thermal protector guards against im-proper lamping. Housing has AIR-Tite gasket pre-installed forASTM-E283 compliance. Double wall housing construction.Door in outer housing allows junction box access from belowceiling. Exclusive socket aiming mechanism swivels and rotatesto properly align lamp. Slope indicator provides quick and con-sistent lamp settings (factory set for 3/12 slope).
Junction Box: Listed for through branch circuit wiring. Posi-tioned to accommodate straight conduit runs. Seven conduitknockouts are uniform 1/2" size with true pryout slots. Four“NM” (non-metallic) cable pryouts with integral strain relief.Quick-connect wiring connectors included.
Bar Hangers: Pre-installed, captive bar hangers allow housing tobe positioned at any point within a 24" joist span. A set screw isprovided to lock bar hangers in position along bar hangers.Score lines provided for easy shortening for 12” joists. Integralnail simplifies installation. Bar hangers can be repositioned 90°without tools. IntegralT-bar clip snaps ontoT-bar spline for quickalignment.
Trim: One piece seamless baffle presents a clean finishedappearance.
Listings: • UL/cUL Listed for Damp Location• UL/cUL Listed for FeedThrough• UL/cUL Listed for Direct Contact with Insulation andcombustible material
COOPER LIGHTING
ALL-PRO
81
EI4700AT also meets the following requirements:• Washington State Energy Code• State of CaliforniaTitle 24 Low EfficacyLuminaire IC and AT requirement
• International Energy Conservation Code (IECC)• NewYork State Energy ConservationConstruction Code (NY-ECCC)
• Certified Under ASTM-E283
Trims For ET4700
EI4700EI4700AT
90W PAR38ERT4980High Gloss ApplianceWhiteTrimwith Black Baffle
Baff le• One piece seamless baffle• Baffle ridges are parallel tofloor plane
ERT4980WHTHigh Gloss ApplianceWhiteTrimwithWhite Baffle
Aperture:5-1/4"[133mm]
OD:8" [203mm]
ALL-PRO
COOPER LIGHTING82
Numerical Index
EI400AT . . . . . . . . . . . . . . . . .10EI400LVAT . . . . . . . . . . . . . . .16EI500AT . . . . . . . . . . . . . . . . .22EI500RAT . . . . . . . . . . . . . . .23EI700 . . . . . . . . . . . . . . . . . . .30EI700R . . . . . . . . . . . . . . . . . .31EI700RAT . . . . . . . . . . . . . . .33EI700AT . . . . . . . . . . . . . . . . .32EI700ATNB . . . . . . . . . . . . . .34EI700NB . . . . . . . . . . . . . . . .35EI700U . . . . . . . . . . . . . . . . .54EI700UAT . . . . . . . . . . . . . . .55EI2700 . . . . . . . . . . . . . . . . . .64EI2700R . . . . . . . . . . . . . . . . .65EI2700AT . . . . . . . . . . . . . . . .66EI4700 . . . . . . . . . . . . . . . . . .80EI4700AT . . . . . . . . . . . . . . . .80ERT401WHT . . . . . . . . . . . . .12ERT401LV . . . . . . . . . . . . . . .18ERT401LVW . . . . . . . . . . . . . .18ERT402 . . . . . . . . . . . . . . . . .13ERT402LV . . . . . . . . . . . . . . .19ERT403 . . . . . . . . . . . . . . . . .12ERT403LV . . . . . . . . . . . . . . .18ERT403LVG . . . . . . . . . . . . . .18ERT404LV . . . . . . . . . . . . . . .19ERT413 . . . . . . . . . . . . . . . . .13ERT413WHT . . . . . . . . . . . . .13ERT501 . . . . . . . . . . . . . . . . .25ERT501WHT . . . . . . . . . . . . .25ERT510 . . . . . . . . . . . . . . . . .25ERT510WHT . . . . . . . . . . . . .25ERT512 . . . . . . . . . . . . . . . . .25ERT512WHT . . . . . . . . . . . . .25ERT513WHT . . . . . . . . . . . . .26ERT513 . . . . . . . . . . . . . . . . .26ERT513WHTTS . . . . . . . . . . .26ERT513TS . . . . . . . . . . . . . . .26ERT520G . . . . . . . . . . . . . . . .24ERT520WHT . . . . . . . . . . . . .24ERT520 . . . . . . . . . . . . . . . . .24ERT521 . . . . . . . . . . . . . . . . .24ERT521G . . . . . . . . . . . . . . . .24ERT560 . . . . . . . . . . . . . . . . .27ERT570 . . . . . . . . . . . . . . . . .27ERT570PB . . . . . . . . . . . . . . .27ERT571 . . . . . . . . . . . . . . . . .27ERT701 . . . . . . . . . . . . . . . . .49ERT701 . . . . . . . . . . . . . . . . .60ERT701 . . . . . . . . . . . . . . . . .76ERT702 . . . . . . . . . . . . . . . . .50ERT702 . . . . . . . . . . . . . . . . .61ERT702 . . . . . . . . . . . . . . . . .76ERT703 . . . . . . . . . . . . . . . . .50
ERT703 . . . . . . . . . . . . . . . . .61ERT703 . . . . . . . . . . . . . . . . .77ERT704 . . . . . . . . . . . . . .39, 48ERT704PB . . . . . . . . . . . .39, 48ERT704 . . . . . . . . . . .60, 70, 75ERT704PB . . . . . . . . . . . .70, 75ERT705 . . . . . . . .40, 50, 61, 70ERT706 . . . . . . . . . . . . . .49, 76ERT706 . . . . . . . . . . . . . . . . .76ERT707WHT . .37, 45, 57, 68, 74ERT707 . . . . . . . . .45, 57, 68, 74ERT708 . . . . . . . . . . .49, 60, 76ERT708 . . . . . . . . . . . . . . . . .60ERT709 . . . . . . . . . . . . . . . . .45ERT709WHT . . . . . . . . . .45, 57ERT709 . . . . . . . . . . . . . . . . .57ERT710G . . . .36, 44, 56, 68, 74ERT710 . . . . .36, 44, 56, 68, 74ERT711 . . . . . . . . . . . . . .39, 49ERT712 . . . . . . . . . . .36, 44, 56ERT712TS . . . . . . . . .36, 44, 56ERT713TS . . . . . . . . . . . .37, 46ERT713 . . . . . . . . . . . .37, 46, 58ERT713WHT . . . . . . .38, 46, 58ERT713WHTTS . . . . .38, 46, 58ERT713LTS . . . . . . . . .38, 47, 59ERT713L . . . . . . . . . . .38, 47, 59ERT714 . . . . . .39, 47, 59, 69, 75ERT714WHT . .39, 47, 59, 69, 75ERT716 . . . . . . . .41, 48, 69, 75ERT717 . . . . . . . . . . . . . . . . .48ERT717WHT . . . . . . . . . . . . .48ERT721 . . . . .40, 51, 62, 71, 77ERT723 . . . . .41, 51, 62, 71, 77ERT725 . . . . . . . . . . .40, 41, 52ERT725TS . . . . . .40, 41, 52, 63ERT725 . . . . . . . . . . . . . .52, 63ERT725WHT . . . . . . . . . .53, 63ERT725WHTTS . . . . . . . .53, 63ERT4980 . . . . . . . . . . . . .79, 81ERT4980WHT . . . . . . . . .79, 81ET400 . . . . . . . . . . . . . . . . . . .8ET400R . . . . . . . . . . . . . . . . . .9ET400LV . . . . . . . . . . . . . . . .14ET400LV . . . . . . . . . . . . . . . .15ET500 . . . . . . . . . . . . . . . . . .20ET500R . . . . . . . . . . . . . . . . .21ET700 . . . . . . . . . . . . . . . . . .42ET700R . . . . . . . . . . . . . . . . .43ET2700 . . . . . . . . . . . . . . . . .72ET2700 . . . . . . . . . . . . . . . . .73ET4700 . . . . . . . . . . . . . . . . .78
Cooper Lighting1121 Highway 74 SouthPeachtree City, Georgia30269
P: 770-486-4800F: 770-486-4801
www.cooperlighting.com
International Sales USACooper Lighting1121 Highway 74 SouthPeachtree City, Georgia30269
P: 770-486-4800F: 770-486-4801
Canadian FacilitiesCooper Lighting5925 McLaughlin RoadMississauga, Ontario L5R 1B8
P: 905-507-4000F: 905-568-7049
.
The Cooper LightingFamily
HaloMetaluxLumarkSure-LitesNeo-RayCorelitePortfolioIrisShaperLumièreInvueMcGraw-EdisonioFail-SafeMWSDLSRSAAmetrix
USA FacilitiesCranbury, New JerseyElk Grove Village, IllinoisIrving, TexasOntario, CaliforniaPeachtree City, Georgia
Canadian FacilitiesCalgary, Alberta
Cooper Industries Ltd.600 Travis, Ste. 5800Houston, TX 77002-1001P: 713-209-8400www. cooperindustries.com
Cooper ConnectionYour Authorized Cooper LightingDistributor is:
ADV080555 Printed in USA
Halo, ALL-PRO, ALL-NAIL and AIR-TITE are valuable trademarks of Cooper Industries in the United States andother countries. You are not permitted to use the Cooper Trademarks without the proper written consent ofCooper Industries.