all dimensions to be checked on site before work foundation...
TRANSCRIPT
-
SCALE:
PROJECT:
TOTAL AREA
OUTBUILDINGS
COVERED STOEP
MAIN BLDG.AREA
SUBURB:
ERF:
CLIENT:
DATE
REV
DATE SEPT. 2016
AS SHOWN
DRAWN: B.H.
CLUSTER HOUSING DEVELOPMENT
TSHWANE
STOVE CONNECTION T TELEPHONE OUTLET
T.V.AERIAL CONDUITSINGLE PLUG OUTLET T VGEYSER CONNECTION G.P.O.JUNCTION BOX
DOOR BELL
CONNECTOR BOX
METER BOARD
TIMER SWITCH LIGHT
CEILING LIGHT
WALL LIGHT DISTRIBUTION BOARD
LIGHT SWITCHELECTRICAL KEY
NOTES:
ERF 2033
ANNLIN EXTENSION 146
ANN2033 TYPE B/10/09/16
HS 084 5061241DESIGN SERVICES(SWART & HARTMAN)
CAPE GANNET 267 (PTY) LTD.
GENERAL:All dimensions to be checked on site before workcommences. Drawings not to be scaled.FOUNDATIONS: To Engineer's specification & details220mm Wall's - 200x600mm Concrete foundations110mm Wall's - 200x600mm Concrete foundationsMin. strength 20 MPa after 28 daysFoundation walls to be of hard burnt stock brick,min. strength 7 MPa solid filledAll foundations to be a min. of 300mm below NGL
FLOORS: To Engineer's specification & detailsApply ant poison as per SABS 024Concrete surface bed min strenght 15 MPa after 28 days19mm Stone on well compacted filling in wetted layersof 150mm provide "ISOBOARD" underslab insulation"USB GREEN" waterproofing membrane25mm thick screed on 75mm min conc. surface bedFinished floors to a min of 150mm above NGLBrick paving on 25mm river sand on DPC on wellcompacted filling to specialist contractor
WALLS:220mm & 110mm Stretcher bond brick walls withmin. strength of 7 MPa Class 3 cement mortar"GUNDLE BRICKGRIP" DPC under all walls &window cill's
ROOF NOTES: To Engineer's specificationCement roof tiles @ 17,5° - 30° pitchon 76x38mm SA Pine roof battens@ 500mm max c/c on Roof trusses @ 760mm max c/c:152x38mm SA Pine WG 6 tie beam152x38mm SA Pine WG 6 rafters114x38mm SA Pine WG 6 posts & struts on76x38mm SA Pine WG 6 wall plate2 Strands 4mm galv. wire roof tie's built in 400mm min38x38mm SA Pine ceiling battens @ 500mm max c/cCement fibrous or similar ceiling and cornice45mm min thick roof insulation in ceiling100x76mm gutters & RWDP with 'Chromadek' finishAll timber to SANS 10163 standards & specificationsProvide underlay according to manufacturer specificationProvide flashigs where any roof abutts to any wallFlashings to be tucked into horizontal joint of brickwork
GLAZING: As per SANS 10400 Part N Requirements0 - 0.75 sqm = 3mm0.75 - 1.5 sqm = 4mm1.5 sqm or larger = 6mmAll sliding doors = 6mm safety glass clearly marked
DRAINAGE NOTES: As per SANS 10400 Requirements100mm diam. PVC pipes @ 1:40 min - 1:50 max fallProvide CE's at 25m intervals and at head of drainProvide IE's at every change in direction of drain50mm ASP to all WC's with VP100mm diam. OVP at head of every drainInvert level to be 450mm min below NGL
GEYSER INSTALLATION:To comply with SABS 10254 requirements
FIRE NOTES:Chimney to comply with SANS 10400 Part 'VV1 - VV4'SWIMMING POOLS:Safety to comply to SABS 1390, self locking gates
SCALE:
PROJECT:
TOTAL AREA
OUTBUILDINGS
COVERED STOEP
MAIN BLDG.AREA
SUBURB:
ERF:
CLIENT:
DATE
REV
DATE SEPT. 2016
AS SHOWN
DRAWN: B.H.
CLUSTER HOUSING DEVELOPMENT
TSHWANE
NOTES:
ERF 2033
ANNLIN EXTENSION 146
ANN2033 TYPE B/10/09/16
HS 084 5061241DESIGN SERVICES(SWART & HARTMAN)
CAPE GANNET 267 (PTY) LTD.
Lighting to comply withrational design.
6,130220 5,800 220
440 2,430 330 2,430 1,000 2,430 330 2,430 440
5,800 2206,130
6,24
0
220
5,80
022
0
12,260
390220
390
G
G
SECTION E-E
face brick finishterracotta concrete roof tiles
plaster and paintb.o.e. window sillsstandard steel windows
face brick finishterracotta concrete roof tiles
plaster and paintb.o.e. window sills
500
d.p.c.
600mm x 200mm
d.p.c. 85
tip up
26°
2465
3815
22
door
conc. foundation
SCALE 1:100
N.G.L
F.F.LN.G.L N.G.L
WEST ELEVATION
EAST ELEVATION
SCALE 1:100
SCALE 1:100
SCALE 1:100
SCALE 1:100
SOUTH ELEVATION
NORTH ELEVATION
standard steel windows
GARAGE
340
GARAGE DOOR
220m
m fi
re w
all
DOUBLEGARAGE
day/night movement switch
GARAGE DOORGARAGE DOOR GARAGE DOOR
DOUBLEGARAGE
GARAGE DOORlintol over lintol overlintol over lintol over
F.F.LN.G.L
day/night movement switch
SCALE 1:100FLOOR PLAN (A3 PLAN FOR GARAGE TYPE B)
F.F.L
F.F.L
TVT
V
11watt(E.S)
11watt(E.S)
11watt(E.S)11watt(E.S)
11watt(E.S)11watt(E.S)
11watt(E.S)
11watt(E.S)
11watt(E.S) 11watt(E.S)
11watt(E.S)
11watt(E.S)
11watt(E.S)11watt(E.S)
11watt(E.S)
11watt(E.S)
11watt(E.S)
11watt(E.S)11watt(E.S)
11watt(E.S)
11watt(E.S)
11watt(E.S)
t/doort/door
2203,600110
2202,670110820110
2203,600600110
7,60
0
110
220
7,60
0
220
2,60
011
01,
200
110
3,14
022
0
220
7,16
022
0
2201,2102201,510220
220
7,16
022
011
022
0
220
2,60
011
033
011
04,
010
220
11,780220 5,560 220 5,560 220
2,300 220 2,300
11,780
5,780 220220
110 5,417
6,890
440 1,022 1 325 533330
880 980
220
2,10
011
01,
800
110
3,04
022
0
220
2,60
011
033
011
04,
010
220
220 220 220 1 510 220 3 390
220
2,960 110 3,600 2206,890
13,780
1,80
0
220
2,10
011
01,
800
110
3,04
022
0
7,60
033
0
AA
AA
BB
BB
AREA SCHEDULEGROUND FLOOR = 45.0m2
PER UNITFIRST FLOOR = 53.0m2
TOTAL FLOOR AREA EX. GARAGE = 98.0m2DOUBLE GARAGE = 38.30m2
100mm P.V.C sp. min. fall 1:50 min.
wc
bath
whb50mm wp,s
drainage duct100mm ovp in duct
drainage duct100mm ovp in duct
50mm wp,s
sink
DGae100mm ovp in ductdrainage duct
ce
ie
IL =-450
ie
ae
ie ce
NORTH ELEVATIONSCALE 1:100
SCALE 1:100
F.F.L
F.F.L
SIDE ELEVATION (TYPICAL)
F.F.L
N.G.LF.F.L
SOUTH ELEVATIONSCALE 1:100
F.F.L
F.F.LN.G.L
F.F.L
F.F.L N.G.L
F.F.L
F.F.LN.G.L
BEDROOM 2
BED ROOM 1BEDROOM 3
BATHRM.
nati-vac traps to allfirst floor fittings
SH
wcwhb
TD57STD57S
TD57SNCTX7S
NC
TX7S
KITCHEN DINING
1m concrete strip around building
TD57S
LIVING ROOM
TD51SNCTX7S
BEDROOM 2
BED ROOM 1 BEDROOM 3
BATHRM.
nati-vac traps to allfirst floor fittings
SH
wc whb
TD57STD57S
TD57S NCTX7S
NC
TX7S
KITCHENDINING
TD57S
LIVING ROOM
TD51S NCTX7S
SCALE 1:100 TYPE B GROUND FLOOR PLAN
TYPE B FIRST FLOOR PLANSCALE 1:100
standard steel windows (TD-type)
concrete roof tiles (Terracotta)
Plaster and Painted wall panelSahara sand colour
flush jointed face-brick walls(Brickor "Town House Caramel")
standard steel windows (TD-type)
concrete roof tiles (Terracotta)
standard steel windows (TD-type)
flush jointed face-brick walls(Brickor "Town House Caramel")
concrete roof tiles (Terracotta)
Plaster and Painted wall panelSahara sand colour
flush jointed face-brick walls(Brickor "Town House Caramel")
ie
aeieie
ce
ie
IL =-450
ae
ie
wc
whb
drainage duct100mm ovp in duct
upSTAIR1234567
8
9 10 1112 13geyser
STAIR down
14
m.s handrail
TD57S
Door to stoorand geyser
TD57S
12345
67 8 910 1112 1314
STAIR
910111213geyser
14
Door to stoorand geyser
STAIRdown
m.s handrail
1 2 3 4 5
67891011121314
1,5m S/D 1,5m S/D
d/w fd/wf
220m
m fi
re w
all
220m
m fi
re w
all
220m
m fi
re w
all
220m
m fi
re w
all
SEE FULL DRAINAGEON SITE PLAN
DG
bath
il=- 450
yard wall
up1 2 3 4 5 6 7
8
D762
D762
D762
D762
D762
D762
D762
D762
D762
solar geyser and/orNOTE:
insulation with R-valueof 2,8m
heat pump to complywith rational design
Lighting to comply withrational design.
Lighting to comply withrational design.
True
Nor
th (
00
ENE (67
.50 )
True
Nor
th (
00 )
ENE (67
.50 )
rational design.Lighting to comply with
rational design.Lighting to comply with
rational design.Lighting to comply with
rational design.Lighting to comply with
Lighting to comply withrational design.
Lighting to comply withrational design.
396
752,
465
170
2465
3818
18
200x600 concretefoundation
SECTION B-B200x600 concretefoundation
396
752,
465
170
1,81
8
SECTION A-ASCALE 1:100 SCALE 1:100
2,46
5
26.0°
LIVING / DINING
75mm concrete surface bedon well compacted fillin layers off 150mm
BEDROOMBEDROOM BATHRM
60026.0°
KITCHENSTORE
STAIR
123456
789
1011121314
STAIR WELL
75mm concrete surface bedon well compacted fillin layers off 150mm
BATH
LIVING RM
BEDROOM 3
600
200x600 concretefoundation
200x600 concretefoundation
NNE
(22.
50 )
NNE
(22.
50 )
Concrete slab to eng.design
) SEE NOTES ONSECTION B-B
Concrete slab to eng.design
100
900
1,00
0
10010
10010
100 10
35x35mm Mild steel hollow sectionhandrail
min
Floor finish
10x10mm Mild steel sectionwelded to posts
Columns fixed with 4mm angle ironbolted to post and slab with 'M6 rawlbolts'
35x35mm Mild steel section
35x35mm Mild steel hollow sectionpost
BALUSTRADE DETAIL1:50
Floor slab
194.
3
250 250 250 250
1,00
0 m
in
10 100 1
0
1001
010
0
10
Vinyl handrail or similar on50x10mm mild steel flat with
10x10mm mild steel verticals @100mm max spacing
50x50mm Mild steelhollow section post
Rise
rs
Treads
CONCRETE STAIRWAY DETAILWITH LIGHT STEEL HANDRAIL1:50
FFL
194.
3 194
.3194
.3 194
.3
300
gully
ie
ie
cengl
min
1:50
1:50
Drain along foundationto be cast in concreteif closer than 1,0m tobuilding
NGL
DRAIN DETAIL
GULLY DETAIL
500
500
2 10
0
site boundary
NGL
min
1,80
030
0
1:50SECTION THRU YARD WALL SECTION THRU BOUNDARY WALL
1:50
2x prefabricated concrete lintols
semi face brick finish
440x440mm brick piers@3m centres110mm maintenace freeboundary wall
foundation @ 3metre centres500x500x230mm Concrete
220mm maintenace free wall
110mm maintenace freeboundary wall
foundation @ 3metre centres500x500x230mm Concrete
2x prefabricated concrete lintols
semi face brick finish
440x440mm brick piers@3m centres
300
min
NGL
220mm maintenace free wall
Window Code TD57S Sliding Door Garage DoorQuantity 10 2 4W x H Size 1 022x1 559 1,559x533 2,100x1,500 2440x2100
Finishes: Metal
Window Schedule Per UnitTD57S(special)
2NCTX7S
6
1,022
1 55
9
533
1 55
9
2,10
0
1 500
2,10
0
2 4401,022
949
ELECTRICAL KEY
STOVE CONNECTION T TELEPHONE OUTLET
T.V.AERIAL CONDUITSINGLE PLUG OUTLET T VGEYSER CONNECTION G.P.O.JUNCTION BOX
DOOR BELL
CONNECTOR BOX
METER BOARD
TIMER SWITCH LIGHT
CEILING LIGHT
WALL LIGHT DISTRIBUTION BOARD
LIGHT SWITCHELECTRICAL KEY
02
NBR GLASS NOTESANS 10400 - PORTION N
Maximum size of pane , m2
3.0mm4.0mm5.0mm6.0mm
0.751.52.13.2
additional glass note:From floor level:
Less than 300mm = 6mmUpto 1000m = safety glass
All glass doors:Safety glass with markers.
GENERAL:All dimensions to be checked on site before workcommences. Drawings not to be scaled.FOUNDATIONS: To Engineer's specification & details220mm Wall's - 200x600mm Concrete foundations110mm Wall's - 200x600mm Concrete foundationsMin. strength 20 MPa after 28 daysFoundation walls to be of hard burnt stock brick,min. strength 7 MPa solid filledAll foundations to be a min. of 300mm below NGL
FLOORS: To Engineer's specification & detailsApply ant poison as per SABS 024Concrete surface bed min strenght 15 MPa after 28 days19mm Stone on well compacted filling in wetted layersof 150mm provide "ISOBOARD" underslab insulation"USB GREEN" waterproofing membrane25mm thick screed on 75mm min conc. surface bedFinished floors to a min of 150mm above NGLBrick paving on 25mm river sand on DPC on wellcompacted filling to specialist contractor
WALLS:220mm & 110mm Stretcher bond brick walls withmin. strength of 7 MPa Class 3 cement mortar"GUNDLE BRICKGRIP" DPC under all walls &window cill's
ROOF NOTES: To Engineer's specificationCement roof tiles @ 17,5° - 30° pitchon 76x38mm SA Pine roof battens@ 500mm max c/c on Roof trusses @ 760mm max c/c:152x38mm SA Pine WG 6 tie beam152x38mm SA Pine WG 6 rafters114x38mm SA Pine WG 6 posts & struts on76x38mm SA Pine WG 6 wall plate2 Strands 4mm galv. wire roof tie's built in 400mm min38x38mm SA Pine ceiling battens @ 500mm max c/cCement fibrous or similar ceiling and cornice45mm min thick roof insulation in ceiling100x76mm gutters & RWDP with 'Chromadek' finishAll timber to SANS 10163 standards & specificationsProvide underlay according to manufacturer specificationProvide flashigs where any roof abutts to any wallFlashings to be tucked into horizontal joint of brickwork
GLAZING: As per SANS 10400 Part N Requirements0 - 0.75 sqm = 3mm0.75 - 1.5 sqm = 4mm1.5 sqm or larger = 6mmAll sliding doors = 6mm safety glass clearly marked
DRAINAGE NOTES: As per SANS 10400 Requirements100mm diam. PVC pipes @ 1:40 min - 1:50 max fallProvide CE's at 25m intervals and at head of drainProvide IE's at every change in direction of drain50mm ASP to all WC's with VP100mm diam. OVP at head of every drainInvert level to be 450mm min below NGL
GEYSER INSTALLATION:To comply with SABS 10254 requirements
FIRE NOTES:Chimney to comply with SANS 10400 Part 'VV1 - VV4'SWIMMING POOLS:Safety to comply to SABS 1390, self locking gates
UNIT B FULL DRAWING (A1) SECTION'S