all courses are recognized by ministry of human …bsates.com/pdf/baba-prospectus-2013.pdfall...
TRANSCRIPT
All Courses are Recognized by Ministry of Human Resource Development,Govt. of India
Applicable for Higher Education & Central/State Government Jobs.
www.bsaitm.in
BSAITMNEW DELHI
TM
• Established in 1995....
• Covered Area : 70000 sq. Fts.
• Centrally Air-Conditioned
• 28 State-of-the-Art Laboratories
• 2 Research Laboratories
• 52 Highly Qualified Faculty Members
• Ultramodern Facilities
• 172 Centres all over India
S No. Particulars Page No.
1 Organisation Structure 3
2 Messages 4
3 About the Institution 5
4 Recognitions 6
5 Objectives of BSATES 7
6 Values 8
7 Philosophy 9
8 Industry Sponsored Programmes 10
9 Lateral Entry / Exemption / Credit System 11
10 Department of Mechanical Engineering 13
11 Department of Electrical Engineering 25
12 Department of Civil & Architecture Engineering 29
13 Department of Information Technology 45
14 Department of Business Studies 49
15 Department of Paramedical Science 54
16 General Instructions 57
17 Rules & Regulations 59
18 Recognition Letters 61
19 Form in-end
Contents
Vikaspuri, New Delhi-110018
Telephone No. of the Institution office / Official
Chairman’s Secretariat Tel.: 011-28532966
Fax : 011-28532966 Principal 011- 28532959
Academic Section Tel.: 011 – 28532901 Finance Branch Tel.: 011 – 28532901
Student Relationship 011- 28532959 Finance Officer 011- 28532959
Manager
Examination Branch Tel. : 011 – 28532901 Information and Tel.: 011 – 28532901
Guidance Cell: 011- 28532959
Executive Officer 011- 28532959
(Evaluation)
Helpline 1 : +91 9873000679
Helpline 2 : +91 9718000679
Administrative Branch Tel.: 011 – 28532901
Baba Saheb Ambedkar Technical Educational Society
Organisation Structure
Chairman
Dr. J.Dasgupta Ph.D.
Vice-Chairman
Capt. Kuldeep Singh Dalal (Master Mariner)
www.bsaitm.in • 03
Dear Students,
Greeting from Baba Saheb Ambedkar Technical Education
Society!!!
I welcome you to the family of students in Baba Saheb
Ambedkar Technical Education Society (BSATES), which was established in
the year 1995 for the promotion of Education among all section of society. Without the constraints of space and
time, Baba Saheb Ambedkar Technical Education Society has established its quality and has reached the unreached
specially the deprived and disadvantage groups of the Society . As inscribed in its motto “Skill Competency to All,
Everywhere” the Institution has set itself an objective to equip its students not only with the technical knowledge of
their Vocation to develop their Skills but also the willingness to succeed which make them Competent in the modern
arena of Industrialization. The programs are very carefully chosen which are innovative and relevant to the society
well recognized by all Government competent Authorities and valid for higher education & central/state Govt. jobs
in PSUs and are offered with moderate cost and modern facilities. All the programs are aimed both for aspiring
students as well as for the working professionals. Flexible mode to teaching represents a major element of our
programs. The contact programmes are conducted regularly with the involvement of experienced staff and
expertise in the concerned fields is tapped for the benefit of the students, periodically. We are proud to announce
that till last year the enrolment was more than 5000.
BSATES aims to be India’s most progressive Institution. We strive to produce highly employable professionals of
highest possible quality in areas of strategic importance. The Institution is already working in Association with
Ministry of Science & Technology, Govt. of Bihar, Department of Employment & Training, Govt. of Uttar Pradesh,
Department of Training & Technical Education, Govt. of Delhi and is participating in various Grant-in-Aid
programmes of Govt. of India and various States Governments.
On behalf of the Society and the Institution, I invite your participation, in realizing a dream of making this Nation, a
knowledge intensive society. I believe that – If the interest and talent of students are carefully interwoven with the
facilities provided, it will bring a tapestry of change in the working skills and standards of competency in coming
years dedicated to our country
With best wishes for your career,
Sincerely Yours,Dr. J. Singh
Message from the desk of
Chairman
04 • www.bsaitm.in
Baba Saheb Ambedkar Technical Educational Society (a
Society with National Presence) was established in 1995 by group of
professionals dedicated for the upliftment of disadvantage groups of the
Society. It recognizes not only the reserved groups Scheduled in the Constitution of India but
also includes women, candidates below Poverty Line who are unable to pursue formal education in urge to earning
their livelihood, Wards of Deceased Army and Police personnel, Wards of Widows and specially the School Dropouts.
The institution has always emphasized on Professional, Technical and Para Medical Education so that we
can built a work force equipped with technical knowledge and craftsmen skills in a very short span of their lives.
Apart from the Vocational courses, the Institution has also introduced Professional and Courses on Applied Sciences
as per the demand of the growing Market. All the Formal and Informal Courses are recognized by Government of
India.
The Institution has also join hands with India can (a Pearson Educomp Co.), a famous International name in
English Language studies and Personality Development, so that the students may get an added advantage in the job
market. The Institution has setup all State-of-the-Art Laboratories and very experienced faculty members so that the
students can achieve the best scores in terms of success in their professional life.
The programs are very carefully chosen which are innovative and relevant to the society and are being
offered with moderate fee yet modern facilities. All the programs are aimed both the aspiring students as well as the
working professionals. Flexible mode of teaching represents a major element in our programs.
The Institution has also introduced “Industry Sponsored Courses” wherein the students will be trained as
per the requirement of the specific Industry and will be practically trained in the concerned Industry itself. After
passing out from the course, they will be appointed in the concerned Industry.
The Institution strive to produce highly employable professionals of highest possible quality in areas of
strategic importance, that would not only benefit the students but would also fuel India’s growth towards a
developed economy.
www.bsaitm.in • 05
about theInstitution
06 • www.bsaitm.in
1. The Institution is a Patron Member of Institution of
Mechanical Engineers (India), Mumbai for Diploma
and Degree level Engineering courses. IME(I) is
recognized by Ministry of Human Resource Development
(MHRD), syllabi approved by All India Council for Technical Education (AICTE) ; www.imeindia.in
2. The Institution is a Student Chapter Institution Member of Institution of Civil Engineers (India), Ludhiana for
Diploma and Degree level Engineering courses. ICE(I) is recognized by Ministry of Human Resource
Development (MHRD), syllabi approved by All India Council for Technical Education (AICTE) ; www.ice.net.in
3. Life Organization member of IETE - The Institution of Electronics & Tele Communications Engineers (India)
conducting Diploma and Degree Courses in Electronics & Telecommunication Engineering and Computer
Science & Engineering Recognized by MHRD Govt. of India and syllabi approved by AICTE : www.iete.org
4. The Institution is Recognized by National Council for Vocational Training (NCVT) under Craftsman Training
Scheme (CTS) of Directorate General of Employment & Training, Ministry of Labour & Employment, Government
of India; www.dget.nic.in
5. The Institution is Recognized by State Council for Vocational Training (SCVT) under Craftsman Training Scheme
(CTS) of Board of Technical Education, Government of NCT of Delhi ; www.tte.delhigovt.nic.in
6. The Institution is Recognized as a Vocational Training Provider (VTP) for Modular Employable Skills, approved
by NCVT, Government of India ;
www.dget.gov.in/mes
7. The Institution is an Institutional Member of Quality Council of India (QCI), Government of India; www.qcin.org
8. The Institution is an Institutional Member of prominent Industry Association and Industrial Bodies like FICCI, CII,
ISTD, ISTE.
Recognitions
Baba Saheb Ambedkar Technical Education Society came into being to achieve the following objectives:
1. To ensure that the quality education reaches one and all in the society specially the deprived and
disadvantage groups of the Society.
2. To play a pivotal role in taking technical education to the bottom of the pyramid to ensure that they
are provided with an opportunity to get quality education at affordable cost and get a chance to
bring themselves to the mainstream of the society.
3. To coordinate and bring the syllabus, pedagogy and expertise of different boards and Universities
under one roof so that students could be given an opportunity to choose from a wide range of
subjects and options which would enable them to learn and then perform in their respective area
of interest.
4. To run employment oriented course which give all the students a chance to secure employment in
their respective areas of expertise.
5. To provide an opportunity of different modes of study (Face to Face, Part–Time, Distance Learning)
so that not only students but professional also could learn and grow. It would also provide an
opportunity to learners to learn at one’s own pace and place.
6. To provide access to higher education and/or technical education to all those who seek it with an
attempt to democratize the education by taking it to the doorsteps of the learners.
Objectives of BSATES
www.bsaitm.in • 07
Values
08 • www.bsaitm.in
The Institution System is guided in fulfilling its
mission by these shared principles and core
Learning : The Institution fosters an environment that
promotes a life of learning for its constituents and uses feedback from its
participants and supporters to improve the quality of its teaching, learning, and support.
Quality : The Institution holds a strong commitment to high standards in all aspects of its educational
activities, learning outcomes, and support services. It seeks to continuously strengthen the overall
effectiveness of its operations.
Integrity : The Institution conducts its operations and makes its public representations in an ethical
manner. It assesses its operations in an open and collaborative manner and practices fairness, honesty, and
objectivity in dealing with its constituencies.
Diversity : The Institution embraces and promotes diversity in its policies and practices to prepare its
learners to live and work successfully in an increasingly diverse society. It strives to create diverse learning
environments by welcoming teachers, learners, and staff that bring diverse ideas, values, backgrounds,
and beliefs to the learning and work environment.
Freedom of Inquiry and Expression : The Institution supports the rights of its constituents to freely inquire
and express their opinions. It engages and encourages an open exchange of ideas and seeks input from all
who wish to participate in its learning programs.
Accountability : The Institution is accountable to its constituencies and the public for fulfilling its mission in
an appropriate manner by openly assessing its operations and by inviting external evaluations by public
agencies.
Adaptive and Responsive : The institution anticipates and adapts to its changing environment and
responds to the needs of the organization and its constituencies in manners both appropriate and timely.
Innovation : The Institution seeks imaginative and effective solutions to its challenges and innovative ways
to fulfill its mission.
Values
Philosophy
www.bsaitm.in • 09
Practical & Training Work
Assignment
The Institution has its own set up of State-of-the-art laboratorie,
The Work Center will provide Practical Counseling to t h e l e a r n e rs .
Apart from the well equipped laboratories, the Institution has arrangements with various Industrial Units
where Practical Training will be provided to the students. The Final Project will be prepared under the
supervision of AICTE Approved college which is Associated with the Institution.
Students are required to submit assignments according to the prescribed schedule before the term-end
examination. In case, the student has not submitted the assignment within the prescribed date, the result
of such candidate will not be declared.
This is a special feature of our academic curriculum,
which had been introduced from the 2011~12
academic session. We would roll out a few courses
where the training period during the academic session would
be on the live projects in industry. After finishing the course the students would get an opportunity to be
hired by the company that they did their training in, depending on their performance during the training.
These courses have been approved by the industry and would give a chance to all the students enrolled
under these programs to be hired by the reputed organizations in the industry. The course contents of
these courses have been approved by eminent academicians in respective fields.
We are an institute that not only professes about running employability enhancing courses, but also
provides placements opportunities, we proudly declare that it’s another feather in our cap.
The Industry Sponsored Programme Fees for any course will be Rs.10000/- (Rupees Ten Thousand Only)
which is to be paid extra apart from the actual programme fees, registration fees, eligibility fees, library
fees, industrial training and industrial visit fees and personality development fees etc.
10 • www.bsaitm.in
Industry Sponsored Programmes
Lateral Entry/Exemption/Credit System
www.bsaitm.in • 11
Lateral Entry/ Exemption:
1. Students who have passed Diploma in c o n c e r n e d
branch of Engineering from State/Central Govt. recognized Technical
Board / Institution / University or Three Year B.Sc. in any stream with subject as Mathematics shall
be allowed direct admission in 2nd year i.e. (III semester) of Degree Engineering Course.
2. 12th Technical or I.T.I or M.C.V.C or N.C.V.T (should be 2 Years) or equivalent can join any branch in
the 2nd year (III semester) of Engineering Diploma irrespective of their branch.
3. Exemptions may be granted in paper(s) or semester(s) depending on the subject(s) cleared by the
candidate by actually passing of the subject(s) and successfully completing the exam, which
include those subjects from the recognized Institution / Colleges / University. Exemptions if eligible
are not to be taken for 'granted' but must be asked for while submitting the Registration and Exam
form along with the attested copies of relevant certificates, mark sheets and exemption fee.
Exemptions granted will be shown only in the mark list of the examination sent to the candidate. No
separate individual intimation will be given.
4. More details of Lateral Entry qualification may be confirmed by logging –in our website :
www.bsaitm.in. However, Lateral Entry qualification can be confirmed by the Admission officer/
Executive officer in person also.
5. The Lateral Entry Fees for any course as mentioned against each course structure to be paid extra
apart from the actual programme fees, registration fees, eligibility fees, library fees, industrial
training and industrial visit fees and personality development fees etc.
12 • www.bsaitm.in
Mode of Delivering Classes : Theory & Practical
The Institution shall follow a Flexi system that
is based on the time factor involved in studying.
The main emphasis of the Institution is to make the p r o g r a m m e s
affordable to all sectors of aspiring candidates. The training mode has been differentiated in 2
modes :
1. Face to Face Mode
In Face to Face mode, one credit is equivalent to 30 study hours inclusive of all learning activities.
Different programmes have different credit requirements. Students have the right to collect credits
at their own pace, convenience and according to their own capability. The classes will be conducted
regularly either in the morning session or in the evening session five days a week. However, for
working executives and professionals classes may be conducted on Weekends also.
2. Distance Mode
In Distance mode, the classes will be conducted either in the weekends or full time classes will be
conducted in the last month of the academic session. The minimum compulsory attendance will be
85%.
Mechanical engineering is a discipline of
engineering that applies the principles of physics and
materials science for analysis, design, manufacturing,
and maintenance of mechanical systems. It is the branch of engineering that involves the production and
usage of heat and mechanical power for the design, production, and operation of machines and tools. It is
one of the oldest and broadest engineering disciplines.
The engineering field requires a vast understanding of core concepts including mechanics,
kinematics, thermodynamics, materials science, and structural analysis. Mechanical engineers use these
core principles along with tools like computer-aided engineering and product lifecycle management to
design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling
systems, transport systems, aircraft, watercraft, robotics, medical devices and more.
Mechanical engineering emerged as a field during the industrial revolution in Europe in the 18th
century; however, its development can be traced back several thousand years around the world.
Mechanical engineering science emerged in the 19th century as a result of developments in the field of
physics. The field has continually evolved to incorporate advancements in technology, and mechanical
engineers today are pursuing developments in such fields as composites, mechatronics, and
nanotechnology. Mechanical engineering overlaps with aerospace engineering, civil engineering,
electrical engineering, and petroleum engineering to varying amounts
Mechanical Engineering
14 • www.bsaitm.in
www.bsaitm.in • 15
DEGREE AND DIPLOMA COURSES in
Recognized & Approved by :
MINISTRY OF HUMAN RESOURCE DEVELOPMENT
(MHRD)
•
ALL INDIA COUNCIL FOR TECHNICAL EDUCATION
(AICTE)
•
UNION PUBLIC SERVICE COMMISSION
(UPSC)
•
GRADUATE APTITUDE TEST IN ENGINEERING
(GATE)
Mechanical EngineeringMechanical Engineering
Awarded by The Institution of Mechanical Engineers (India)
Hasmukh Bhavan,Behind CIDCO Office, Near Hiranandani Park,
Kharghar, Navi Mumbai - 410 210.
(For working Professionals)
Minimum Duration : 3 Years
Eligibility : A Pass in 10th Standard with English, Science & Mathematics
1st Semester
2nd Semester
3rd Semester
Code Course Title
TE1.1 Communication Skills
TE1.2 Engineering Mathematics – I
TE1.3 Applied Physics
Code Course Title
TE1.4 Applied Chemistry
TE1.5 Engineering Mathematics II
TE1.6 Computer Applications
Code Course Title
TE2.1 Applied Mechanics
TE2.2 Electrical Technology
TE2.3 Engineering Graphics
TE2.4 Strength Of Materials
TE2.5 Theory Of Machines
16 • www.bsaitm.in
Diploma in Mechanical Engineering (T.Engg.)
4th Semester
5th Semester
6th Semester
Code Course Title
TE2.6 Manufacturing Processes
TE2.7 Thermal Engineering
TE2.8 Industrial Organization & S M
TE2.9 Fluid Power
TE2.10 Workshop Practice
Code Course Title
TE2.11 Machine Design
TE2.12 Metrology and Quality Control
TE2.13 Production Technology
TE2.14 Refrigeration & Air-Conditioning System
TE2.15 Automobile Manufacturing System
PR3.1 Project Work
After completion of theory papers, students have to
undergo at least three months mandatory
Apprenticeship/ Practical Training at any AICTE
recognized polytechnic for award of Technician
Engineers Certificate
www.bsaitm.in • 17
*Note : For the candidates applying for lateral entry directly in the Semester-3 require to pay
the Composite Fees of Rs. 7050/- along with Board fee of Rs. 16025/-.
All students are liable to pay the following Project Fees to the Board (payable at 6th
Semester)
Project Approval Fees : Rs. 11500/-
Semester wise Fee Structure
Board Fees
Program / Tuition Fees Rs. 25000/-
Examination Fees Rs. 3000/-
BSAITM Registration, Industry Seminar, Guest Lectures and Visits
(At the time of Admission only) Rs. 5500/-
a) At the time of Admission (Board Fees) 16025/-
b) Composite Fees (payable at 3rd Semester) 7050/-*
c) Certification Fees (payable at 6th Semester) 2750/-
18 • www.bsaitm.in
Degree in Mechanical Engineering (C.Engg.)
Awarded by The Institution of Mechanical Engineers (India)
Hasmukh Bhavan,Behind CIDCO Office, Near Hiranandani Park,
Kharghar, Navi Mumbai - 410 210.
(For working Professionals)
Minimum Duration : 4 Years
Eligibility : A Pass In 10+2 level examination with English, Physics, Chemistry, Maths or a pass in
T. Eng, Part-I of the Institution’s examinations
1st Semester
2nd Semester
3rd Semester
Code Course Title
TE2.1 Applied Mechanics
TE2.2 Electrical Technology
TE2.3 Engineering Graphics
TE2.4 Strength Of Materials
TE2.5 Theory Of Machines
Code Course Title
TE2.6 Manufacturing Processes
TE2.7 Thermal Engineering
TE2.8 Industrial Organization & S M
TE2.9 Fluid Power
TE2.10 Workshop Practice
Code Course Title
TE2.11 Machine Design
TE2.12 Metrology and Quality Control
www.bsaitm.in • 19
TE2.13 Production Technology
TE2.14 Refrigeration & Air-Conditioning System
TE2.15 Automobile Manufacturing System
Code Course Title
A 1 Introduction to Manufacturing Process
A 2 Ad Electrical Technology
A 3 Mechanics
A 4 Fundamental of Computer
A 5 Advance Engineering Mathematics
Code Course Title
A 6 Thermodynamics
A 7 Fluid Mechanics
A 8 Society, Environment, Engineering
A 9 Dynamics
A 10 Adv Mat Sc & Metallurgy
Code Course Title
A 11 Heat Transfer-I
A 12 Theory of Machine
Code Course Title
BC 1 Environmental Engineering
BC 2 Computer Graphics
BC 3 I.C. Engines & Automobile Engineering
4th Semester
5th Semester
6th Semester
7th Semester
20 • www.bsaitm.in
BC 4 Operation Research
BC 5 Advance Strength of Materials
Code Course Title
BC 6 Industrial Economics & Management
BC 7 Mechanical Measurements
BC 8 Hydraulic Machines
Optional In addition to 3 compulsory subjects, Semester-8
students are required to appear and pass in 3
optional subjects
BO 1.1 Refrigeration & Air- Conditioning
BO 1.2 Metal Cutting & Tool Design
BO 1.3 Jigs & Fixture Design
BO 1.4 CAD/ CAM (Application ) & Automation
BO 1.5 CNC Programming
BO 1.6 Meteorology & Quality Control
BO 1.7 Management of Technology
BO 1.8 Machine Vibration Analysis
8th Semester
www.bsaitm.in • 21
*Note : For the candidates applying for lateral entry directly in the Semester-4 require to pay
the Composite Fees of Rs. 8050/- along with Board fees of Rs. 16025/-.
**Note : For the candidates applying for lateral entry directly in the Semester-7 require to pay
the Composite Fees of Rs. 9150/- along with Board fees of Rs. 16025/-.
All students are liable to pay the following Project Fees to the Board (payable at 6th
Semester)
Project Approval Fees : Rs. 11500/-
22 • www.bsaitm.in
Semester wise Fee Structure
Board Fees
Program / Tuition Fees Rs. 30000/-
Examination Fees Rs. 3000/-
BSAITM Registration, Industry Seminar, Guest Lectures and Visits
(At the time of Admission only) Rs. 5500/-
a) At the time of Admission (Board Fees) 16025/-
b) Composite Fees (payable at 4th Semester) 8050/-*
c) Composite Fees (payable at 7th Semester) 9150/-**
c) Certification Fees 3750/-
Civil & ArchitecturalEngineering
14 • www.bsaitm.in
Civil engineering is one of the oldest of the
engineering professions. Ancient feats such
as the building of the Egyptian pyramids and
Roman road systems are based on civil engineering principles.
Civil engineers can be found in all areas of society from small private contractors to
municipal agencies, federal government organizations, and the military. One of the
largest civil engineering organizations in the United States is the Army Corps of
Engineers, which despite its name is a primarily civilian organization focused on the
development of canals, locks, and dams; flood control, and other public works
projects.
Because civil engineering focuses on the study of structural systems, the core courses
in a civil engineering curriculum reflect this. Most civil engineers start their learning
with basic physics and calculus courses. Later courses can include geology, soil
mechanics, and design of steel structures. A civil engineering curriculum is usually
rounded out with advanced classes that match the student's desired specialty, which
may hydrology, development of concrete structures, and highway design, among
other specialties.
Recognised by
Diploma in Civil Engineering (T.Engg.)
www.bsaitm.in • 13
Sl.No. Ministry/Organisation Reference No. & Date
1 Ministry of Human Resource No. F.24/1/2007-TS.III DatedDevelopment, Department of 06.11.2007.Higher Education, Govt. of India.
2 All India Council for Technical Education No. Eqvi./AB/Gen.Corr./2008-09(AICTE) Dated 16.09.2008.
3 Government of National No. 1(1)/2008-DD/SB/1520 Capital Territory of Delhi. /5609 Dated 29.10.2008.
4 Distance Education Council, Indira No. DEC/ICE/08/7901 Dated Gandhi National Open University, Delhi 25.04.2008
5 Association of Indian Universities No. EV/III (366)/2008/71(AIU). Dated 11.04.2008.
6 Union Public Service Commission No. F.2/1/2007-EIB Dated (UPSC), New Delhi. 30. 06.2009.
7 GATE GATE by National CoordinatingBoard-Gate, Deptt. of Education,MHRD, GoI..
8 Government of Goa. No.12/11/87-PER/Vol.II Dated06.03.2008.
9 Directorate of Technical Education, Haryana No. 351-53/Dev. Dated 13.06.2008.
10 RITES Limited No. RITES/RI/RCED/Misc/2008(A Govt. of India Enterprises). Dated 14.07.2008.
11 Delhi Development Authority. No. F 7(98)2008/PBI/2399 Dated20.08.2008.
12 IRCON International Limited No. IRCON/HRM/31/28/728 Dated(A Govt. of India Undertaking). 01.09.2008.
13 Directorate General Border Roads, No. 13616/Gen/Rect /DGBR/New Delhi 97/E1A Dated 21.10.2008.
14 Government of Andhra Pradesh. No. 10232/EC.2/2008-02 Dated05.11.2008.
15 Administration of Daman & Diu (UT). No. 10.2 (PART-IV) EST-GP/200809/797 Dated 11.11.2008
16 Government of Kerala. No.3946/GI/08/H. Edn Dated08.07.2008.
17 CPWD- Central Public Government of India. No.A-12021Works Department, /1/2006-EC VI/74-75 Dated
19.01.2009.
18 Visvesvaraya Technical University No. VTU/Aca/OS-GC/2009-10/2118Karnataka Dated 4.06.2009
19 Government of Nagaland. No. IT/10-1/04 Dated 30th July,2009
20 Government of Uttarakhand, PWD, Pauri No.1011/20(15) E.A.-Parv./09-10 DatedGarhwal 06.09.2009.
21 Government of Chhattisgarh, Department of Technical Education, Manpower Planning, No.F-14/07/42 Dated 11.05.2010.Science & Technology, Mantralaya, D.K.S Bhavan, Raipur
22 Govt. of Punjab, Technical Education and No. 1362 Dated 24.06.2010.Industrial Training, Punjab
23 Rural Electrification Corporation Limited No. REC/ED(HR)/Trg./2010-11/ Dated (A Government of India Enterprises) 10.08.2010
24 Cement Corporation of India Ltd. No. PD/HRD/6/6/2010/6119 Dated(A Government of India Enterprises) 12.08.2010
25 Delhi Metro Rail Corporation Ltd. No. DMRC/O&M/HR/2010 Dated20.08.2010
26 Oil and Natural Gas Corporation Ltd. Rectt. No.7(2)/PR-Rectt./2010 Dated 26.08.2010Section, Tel Bhawan, Dehradun
27 Anna University Chennai, Chennai-600025 No. 2664/AU/DD1-DAC/2011/F21 DatedTamil Nadu 07.01.2011
Career House, East Park Road, Karol Bagh, New Delhi-110005
Minimum Duration : 3 Years
Eligibility : A Pass in 10th Standard with English, Science & Mathematics
(For working Professionals)
1st Semester
Code Course Title
TC1.1 Basic Civil Engineering
TC1.2 Technical Writing
TC1.3 Engineering Physics & Applied Mechanics
2nd Semester
Code Course Title
TC1.4 Engineering Mathematics
TC1.5 Engineering Drawing
TC1.6 Engineering Chemistry
Awarded by The Institution of Civil Engineers (India)
14 • www.bsaitm.in
3rd Semester
Code Course Title
TC2.1 Surveying
TC2.2 Fluid Mechanics & Machinery
TC2.3 Soil Mechanics
4th Semester
Code Course Title
TC2.4 Mechanics of Solids
TC2.5 Basic Structural Design
TC2.6 Environmental Engineering
5th Semester
Code Course Title
TC2.7 Construction Technology
TC2.8 Estimation, Costing & Specifications
TC2.9 Civil Engineering designs
6th Semester
PR3.1 Project Work
After completion of theory papers, students have to undergo at
least three months mandatory Apprenticeship/ Practical Training at
any AICTE recognized polytechnic for award of Technician Engineers
Certificate
www.bsaitm.in • 13
Semester wise Fee Structure for Lateral Entry Candidates
Board Fees
Program / Tuition Fees Rs. 22000/-
Examination Fees Rs. 3500/-
BSAITM Registration, Industry Seminar, Guest Lectures and Visits
(At the time of Admission only) Rs. 5500/-
a) At the time of Admission (directly to 3rd Semester) Rs. 14250/-
b) Composite Fees (payable at 4rd Semester) Rs. 15500/-
c) Examination Fees for Qualifying Exam for ITI Holders Rs. 4000/-
d) Exemption Examination Fees (per subject) Rs. 500/-
e) Certification Fees (payable at 6th Semester) Rs. 2500/-
f) Annual Subscription Fees Rs. 500/-
*Note : Candidates applying for lateral Entry directly in Semester III will follow the following
fee structure
All students are liable to pay the following Project Fees to the Board (payable at 6th Semester)
Project Approval Fees : Rs. 8500/-
Semester wise Fee Structure
Board Fees
Program / Tuition Fees Rs. 22000/-
Examination Fees Rs. 3500/-
BSAITM Registration, Industry Seminar, Guest Lectures and Visits
(At the time of Admission only ) Rs. 5500/-
a) At the time of Admission Rs.14250/-
b) Composite Fees (payable at 3rd Semester) Rs. 15500/-
c) Certification Fees (payable at 6th Semester) Rs. 2500/-
d) Annual Subscription Fees Rs. 500/-
14 • www.bsaitm.in
Diploma in Architectural Engineering (T.Engg.)
Recognised by
www.bsaitm.in • 13
Sl.No. Ministry/Organisation Reference No. & Date
1 Ministry of Human Resource No. F.24/1/2007-TS.III DatedDevelopment, Department of 06.11.2007.Higher Education, Govt. of India.
2 All India Council for Technical Education No. Eqvi./AB/Gen.Corr./2008-09(AICTE) Dated 16.09.2008.
3 Government of National No. 1(1)/2008-DD/SB/1520 Capital Territory of Delhi. /5609 Dated 29.10.2008.
4 Distance Education Council, Indira No. DEC/ICE/08/7901 Dated Gandhi National Open University, Delhi 25.04.2008
5 Association of Indian Universities No. EV/III (366)/2008/71(AIU). Dated 11.04.2008.
6 Union Public Service Commission No. F.2/1/2007-EIB Dated (UPSC), New Delhi. 30. 06.2009.
7 GATE GATE by National CoordinatingBoard-Gate, Deptt. of Education,MHRD, GoI..
8 Government of Goa. No.12/11/87-PER/Vol.II Dated06.03.2008.
9 Directorate of Technical Education, Haryana No. 351-53/Dev. Dated 13.06.2008.
10 RITES Limited No. RITES/RI/RCED/Misc/2008(A Govt. of India Enterprises). Dated 14.07.2008.
11 Delhi Development Authority. No. F 7(98)2008/PBI/2399 Dated20.08.2008.
12 IRCON International Limited No. IRCON/HRM/31/28/728 Dated(A Govt. of India Undertaking). 01.09.2008.
13 Directorate General Border Roads, No. 13616/Gen/Rect /DGBR/New Delhi 97/E1A Dated 21.10.2008.
14 Government of Andhra Pradesh. No. 10232/EC.2/2008-02 Dated05.11.2008.
15 Administration of Daman & Diu (UT). No. 10.2 (PART-IV) EST-GP/200809/797 Dated 11.11.2008
16 Government of Kerala. No.3946/GI/08/H. Edn Dated08.07.2008.
17 CPWD- Central Public Government of India. No.A-12021Works Department, /1/2006-EC VI/74-75 Dated
19.01.2009.
18 Visvesvaraya Technical University No. VTU/Aca/OS-GC/2009-10/2118Karnataka Dated 4.06.2009
19 Government of Nagaland. No. IT/10-1/04 Dated 30th July,2009
Career House, East Park Road, Karol Bagh, New Delhi-110005
Minimum Duration : 3 Years
Eligibility : A Pass in 10th Standard with English, Science & Mathematics
(For working Professionals)
20 Government of Uttarakhand, PWD, Pauri No.1011/20(15) E.A.-Parv./09-10 DatedGarhwal 06.09.2009.
21 Government of Chhattisgarh, Department of Technical Education, Manpower Planning, No.F-14/07/42 Dated 11.05.2010.Science & Technology, Mantralaya, D.K.S Bhavan, Raipur
22 Govt. of Punjab, Technical Education and No. 1362 Dated 24.06.2010.Industrial Training, Punjab
23 Rural Electrification Corporation Limited No. REC/ED(HR)/Trg./2010-11/ Dated (A Government of India Enterprises) 10.08.2010
24 Cement Corporation of India Ltd. No. PD/HRD/6/6/2010/6119 Dated(A Government of India Enterprises) 12.08.2010
25 Delhi Metro Rail Corporation Ltd. No. DMRC/O&M/HR/2010 Dated20.08.2010
26 Oil and Natural Gas Corporation Ltd. Rectt. No.7(2)/PR-Rectt./2010 Dated 26.08.2010Section, Tel Bhawan, Dehradun
27 Anna University Chennai, Chennai-600025 No. 2664/AU/DD1-DAC/2011/F21 DatedTamil Nadu 07.01.2011
Awarded by The Institution of Civil Engineers (India)
14 • www.bsaitm.in
2nd Semester
Code Course Title
TA1.4 Engineering Mathematics
TA1.5 Engineering Drawing
TA1.6 Engineering Chemistry
1st Semester
Code Course Title
TA1.1 Basic Architectural Engineering
TA1.2 Technical Writing
TA1.3 Engineering Physics & Applied Mechanics
3rd Semester
Code Course Title
TA2.1 History of Architecture
TA2.2 Free Hand Drawing & Painting
TA2.3 Building Construction
4th Semester
Code Course Title
TA2.4 Structural Mechanics
TA2.5 Theory of Structures
TA2.6 Estimation & Costing
5th Semester
Code Course Title
TA2.7 Surveying & Levelling
TA2.8 Architecture Designs & Graphics
TA2.9 Building Material & Science
6th Semester
PR3.1 Project Work
After completion of theory papers, students have to undergo at
least three months mandatory Apprenticeship/ Practical Training at
any AICTE recognized polytechnic for award of Technician Engineers
Certificate
www.bsaitm.in • 13
Semester wise Fee Structure for Lateral Entry Candidates
Board Fees
Program / Tuition Fees Rs. 22000/-
Examination Fees Rs. 3500/-
BSAITM Registration, Industry Seminar, Guest Lectures and Visits
(At the time of Admission only ) Rs. 5500/-
a) At the time of Admission (directly to 3rd Semester) Rs. 14250/-
b) Composite Fees (payable at 4rd Semester) Rs. 15500/-
c) Examination Fees for Qualifying Exam for ITI Holders Rs. 4000/-
d) Exemption Examination Fees (per subject) Rs. 500/-
e) Certification Fees (payable at 6th Semester) Rs. 2500/-
f) Annual Subscription Fees Rs. 500/-
*Note : Candidates applying for lateral Entry directly in Semester III will follow the following
fee structure
All students are liable to pay the following Project Fees to the Board (payable at 6th
Semester)
Project Approval Fees : Rs.8500/-
Semester wise Fee Structure
Board Fees
Program / Tuition Fees Rs. 22000/-
Examination Fees Rs. 3500/-
BSAITM Registration, Industry Seminar, Guest Lectures and Visits
(At the time of Admission only ) Rs. 5500/-
a) At the time of Admission Rs. 14250/-
b) Composite Fees (payable at 3rd Semester) Rs. 15500/-
c) Certification Fees (payable at 6th Semester) Rs. 2500/-
d) Annual Subscription Fees Rs. 500/-
14 • www.bsaitm.in
Recognised by
Degree in Civil Engineering (C.Engg.)
www.bsaitm.in • 13
Sl.No. Ministry/Organisation Reference No. & Date
1 Ministry of Human Resource Development, Department of 06.11.2007.Higher Education, Govt. of India.
2 All India Council for Technical Education No. Eqvi./AB/Gen.Corr./2008-09(AICTE) Dated 16.09.2008.
3 Government of National No. 1(1)/2008-DD/SB/1520 Capital Territory of Delhi. /5609 Dated 29.10.2008.
4 Distance Education Council, Indira No. DEC/ICE/08/7901 Dated Gandhi National Open University, Delhi 25.04.2008
5 Association of Indian Universities No. EV/III (366)/2008/71(AIU). Dated 11.04.2008.
6 Union Public Service Commission No. F.2/1/2007-EIB Dated (UPSC), New Delhi. 30. 06.2009.
7 GATE GATE by National CoordinatingBoard-Gate, Deptt. of Education,MHRD, GoI..
8 Government of Goa. No.12/11/87-PER/Vol.II Dated06.03.2008.
9 Directorate of Technical Education, Haryana No. 351-53/Dev. Dated 13.06.2008.
10 RITES Limited No. RITES/RI/RCED/Misc/2008(A Govt. of India Enterprises). Dated 14.07.2008.
11 Delhi Development Authority. No. F 7(98)2008/PBI/2399 Dated20.08.2008.
12 IRCON International Limited No. IRCON/HRM/31/28/728 Dated(A Govt. of India Undertaking). 01.09.2008.
13 Directorate General Border Roads, No. 13616/Gen/Rect /DGBR/New Delhi 97/E1A Dated 21.10.2008.
14 Government of Andhra Pradesh. No. 10232/EC.2/2008-02 Dated05.11.2008.
15 Administration of Daman & Diu (UT). No. 10.2 (PART-IV) EST-GP/200809/797 Dated 11.11.2008
16 Government of Kerala. No.3946/GI/08/H. Edn Dated 08.07.2008.
17 CPWD- Central Public Government of India.No.A-12021Works Department, /1/2006-EC VI/74-75 Dated 19.01.2009.
18 Visvesvaraya Technical University No. VTU/Aca/OS-GC/2009-10/2118Karnataka Dated 4.06.2009
19 Government of Nagaland. No. IT/10-1/04 Dated 30th July, 2009
No. F.24/1/2007-TS.III Dated
14 • www.bsaitm.in
Career House, East Park Road, Karol Bagh, New Delhi-110005
Minimum Duration : 4 Years
Eligibility : A Pass In 10+2 level examination with English, Physics, Chemistry, Maths
or a pass in T. Eng, Part-I of the Institution’s examinations
(For working Professionals)
Code Course Title
TC2.1 Surveying
TC2.2 Fluid Mechanics & Machinery
TC2.3 Soil Mechanics
1st Semester
20 Government of Uttarakhand, PWD, Pauri No.1011/20(15) E.A.-Parv./09-10 Dated
Garhwal 06.09.2009.
21 Government of Chhattisgarh, Department of
Technical Education, Manpower Planning, No.F-14/07/42 Dated 11.05.2010.
Science & Technology, Mantralaya,
D.K.S Bhavan, Raipur
22 Govt. of Punjab, Technical Education and No. 1362 Dated 24.06.2010.
Industrial Training, Punjab
23 Rural Electrification Corporation Limited No. REC/ED(HR)/Trg./2010-11/ Dated 10.08.2010
(A Government of India Enterprises)
24 Cement Corporation of India Ltd. No. PD/HRD/6/6/2010/6119 Dated 12.08.2010
(A Government of India Enterprises)
25 Delhi Metro Rail Corporation Ltd. No. DMRC/O&M/HR/2010 Dated 20.08.2010
26 Oil and Natural Gas Corporation Ltd. Rectt. No.7(2)/PR-Rectt./2010 Dated 26.08.2010
Section, Tel Bhawan, Dehradun
27 Anna University Chennai, Chennai-600025 No. 2664/AU/DD1-DAC/2011/F21 Dated
Tamil Nadu 07.01.2011
Code Course Title
TC2.4 Mechanics of Solids
TC2.5 Basic Structural Design
TC2.6 Environmental Engineering
2nd Semester
Awarded by The Institution of Civil Engineers (India)
3rd Semester
Code Course Title
TC2.7 Construction Technology
TC2.8 Estimation, Costing & Specifications
TC2.9 Civil Engineering designs
PR 3.1 Workshop Practice
4th Semester
Code Course Title
AC 1.1 Advance Engineering Mathematics
AC 1.2 Advance Strength of Materials
AC 1.3 Computer Programming and Numerical Methods
AC 1.4 Foundation Engineering
5th Semester
Code Course Title
AC 1.5 Reinforced Concrete Structures and Advanced Concrete Technology
AC 1.6 Design of Steel Structures
SV 5.1 Site Visit
PR 5.1 Workshop Practice
6th Semester
Code Course Title
BC 2.1 Applied Hydraulics & Fluid Mechanics
BC 2.2 Machine Foundations
BC 2.3 Advance Reinforced Concrete Design
BC 2.4 Optimization in Structural design
www.bsaitm.in • 13
7th Semester
Code Course Title
BC 2.5 Environmental Engineering
OPTION 1 Group –I Building Construction
BCO 3.1 Advanced Design of Reinforced Concrete Structures
Group –II Highway Engineering
BCO 3.8 Road Transport Management
Group –III Environmental Engineering
BCO 3.14 Pollution & Control Engineering
Group –IV Irrigation & Drainage Engineering
BCO 3.20 Irrigation Engineering
OPTION 2 Group –I Building Construction
BCO 3.2 Advanced Design of Steel Structures
Group –II Highway Engineering
BCO 3.9 Traffic Engineering
Group –III Environmental Engineering
BCO 3.15 Unit Processes in Environmental Engineering
Group –IV Irrigation & Drainage Engineering
BCO 3.21 Ground Water Hydrology
OPTION 3 Group –I Building Construction
BCO 3.3 Prestresses Concrete Structures
Group –II Highway Engineering
BCO 3.10 Highways and Railways Engineering
Group –III Environmental Engineering
BCO 3.16 Industrial Waste treatment & Disposal
Group –IV Irrigation & Drainage Engineering
BCO 3.22 Operation and maintenance of Irrigation Structure
14 • www.bsaitm.in
8th Semester
Code Course Title
OPTION 4 Group –I Building Construction
BCO 3.4 Analysis & design of Plate and Shell Structures
Group –II Highway Engineering
BCO 3.11 Airports, Docks and Harbours
Group –III Environmental Engineering
BCO 3.17 Environmental Engineering Structures
Group –IV Irrigation & Drainage Engineering
BCO 3.23 Design and Drawing
OPTION 5 Group –I Building Construction
BCO 3.5 Design of Tall Buildings
Group –II Highway Engineering
BCO 3.12 Bridge Engineering
Group –III Environmental Engineering
BCO 3.18 Sanitary Engineering
Group –IV Irrigation & Drainage Engineering
BCO 3.24 Water Resources Management
PR 8.1 Project Work
After completion of theory papers, students have to undergo at least
three months mandatory Apprenticeship/ Practical Training at any
AICTE recognized College for award of Chartered Engineers Certificate
www.bsaitm.in • 13
Semester wise Fee Structure
Board Fees
Program / Tuition Fees Rs. 25000/-
Examination Fees Rs. 4000/-
BSAITM Registration, Industry Seminar, Guest Lectures and Visits
(At the time of Admission only ) Rs. 5500/-
a) At the time of Admission Rs. 15500/-
b) Composite Fees (payable at 6th Semester) Rs. 18500/-
c) Certification Fees (payable at 8th Semester) Rs. 3000/-
d) Annual Subscription Fees Rs. 500/-
*Note : Candidates applying for lateral Entry directly in Semester IV will follow the following
fee structure
Semester wise Fee Structure for Lateral Entry Candidates
Board Fees
Program / Tuition Fees Rs. 25000/-
Examination Fees Rs. 4000/-
BSAITM Registration, Industry Seminar, Guest Lectures and Visits
(At the time of Admission only ) Rs. 5500/-
a)At the time of Admission (directly to 4th Semester) Rs. 15500/-
b) Composite Fees (payable at 6th Semester) Rs. 18500/-
c) Exemption Examination Fees (per subject) Rs. 1000/-
d) Certification Fees (payable at 8th Semester) Rs. 3500/-
e) Annual Subscription Fees Rs. 500/-
All students are liable to pay the following Project Fees to the Board (payable at 8th
Semester)
Project Approval Fees : Rs.8500/-
14 • www.bsaitm.in
14 • www.bsaitm.in
Information Technology
The world has felt a the explosive impact of
computers and the IT industry in its very core and the
increasing need for computers in the daily life of people has
made it imperative that new designs and new computer software systems be developed so that advancing
technology can be applied in a growing range of applications. The work assigned to people who are called
computer software engineers evolves very fast, which reflects the changes in technology as well as the
increase of new specializations which keep cropping up in this field along with the preferences and
practices of employers. The principles and knowledge of computer science, engineering, and
mathematical analysis are employed by computer software engineers for designing, developing, testing,
and evaluating the software and the systems that computers use to carry out various applications.
Software engineers who work in applications or systems development are engaged in analyzing user needs
and designing, constructing, testing, and maintaining computer applications software or systems. Various
kinds of software like software for operating systems and network distribution, and compilers, which
convert programs for execution on a computer, are developed by a software engineer. In the programming
or coding fields, software engineers give instructions to a computer, line by line; on how on perform a
function or operation. These engineers are also geared to tackle technical problems and hitches. Although
these engineers need to possess string programming skills, they are more occupied with the development
of algorithms and in analyzing and solving problems in programming than with writing codes.
Awarded by Jamia Hamdard University, Delhi
University Recognised by UGC, MHRD & DEC, Govt of India
Duration : Minimum three year and maximum six years.
Eligibility : A candidate seeking admission to BCA programme must have passed 10+2
examination from a recognized board/institute/University
Course Coverage
First Year
Second Year
1 Computer Fundamentals
2 PC Software
3 Computer Mathematics
4 Principles of Management
5 Lab-I: (PC Software)
6 Programming Fundamentals
7 Operating Systems
8 Programme in 'C'
9 Business Systems
10 Lab-II: (Programming in 'C')
1 Computer System Architecture
2 Object Oriented Programming in C++
3 System Analysis & Design
4 Database Application in MS Access
5 Lab-I: (C++ Application in MS Access)
6 Numerical and Statistical Analysis
7 Data Structures in 'C'
8 Computer Networks
9 Web Technologies
Bachelor of Computer Application (BCA)
www.bsaitm.in • 13
Course Fees Rs. 16000/- Semester+ Examination Fee +
Identity Card Fee Rs. 100/-
BSAITM Registration : 5500/- (One time payment at the time of admission)
Rs : 2000/- per year
10 Lab-II: Implementing Data Structures in 'C'
1 Software Engineering
2 Java Programming
3 Operating Systems Administration with Windows 2000
4 Advanced Web Development
5 Lab-I: Website Development
6 Project Work
Third Year
14 • www.bsaitm.in
14 • www.bsaitm.in
Business Studies
Business and Management is the rigorous
and critical study of the ways in which
individuals and groups interact in a dynamic
business environment. It is an academic discipline that examines how
business decisions are made and the impact of these decisions on internal and external
environments. Business and Management provides students with the skills to make
sense of the circumstances that drive change in an interdependent and multicultural
world. Emphasis is placed on the ideals of international cooperation and responsive
citizenship
Business and Management draws from such a varied range of sources that it is suitable
for most occupations. It is widely accepted by universities for many diverse courses and
employers recognise its strong practical respectability. Future careers may include
management, retailing, marketing, sales, accountancy, research, the civil service and
consultancy. This course will provide students with a wide range of transferable skills and
can, therefore, be useful in many other subjects and careers
The main aims of the Business and Management courses are:
• To encourage a holistic view of the world of business
• To enable candidates to develop the capacity to think critically
• To enhance candidates’ ability to make decisions
• To enable candidates to appreciate the pace, nature and significance of change
Course Coverage
First Year
Second Year
Third Year
1. Principles of Management
2. Financial Accounting
3. Business Communication
4. Computer Fundamentals
5. Marketing Management
6. Managerial Economics
7. Business Statistics
8. Production & Operations Management
1. Business Policy
2. Business Low
3. Human Resource Management
4. Organizational Behaviour
5. Mathematics for Business and Economics
6. Financial Management
7. Advertising Fundamentals
8. Entrepreneurship & Small Business Management
1. Corporate Governance
Awarded by Jamia Hamdard University, Delhi
University Recognised by UGC, MHRD & DEC, Govt of India
Duration : Minimum three year and maximum six years.
Eligibility : A candidate seeking admission to BBA programme must have passed 10+2
examination from a recognized board/institute/university.
Bachelor of Business Administration (BBA)
www.bsaitm.in • 13
2. Marketing Research
3. Sales Management
4. Total Quality Management
5. Conflict Management and Negotiation Skills
6. Environmental Management
7. Leadership
8. Project Work
Course Fee Rs. 16000 per semester+Rs. 2000 Examination Fee per year +
Rs. 100 Identity Card Fee
BSAITM Registration : 5500/- (One time payment at the time of admission)
14 • www.bsaitm.in
NATIONAL INSTITUTE OF MEDICAL SCIENCES
NIMS UNIVERSITY
Fully empowered & incorporated as a regular & full-fledged
University vide NIMS UNIVERSITY ACT, 2008
duly recognized by Government of India under the provisions of
Section 2f & Section 22 of UGC Act, 1956
Recognised by
Medical Council of India (MCI), Dental Council of India (DCI)
Pharmacy Council of India (PCI), Nursing Council of India (NCI)
UGC-AICTE-DEC Joint Committee
www.bsaitm.in • 13
A Paramedic is an expert who assists the
doctors in focused areas and aids for improved diagnosis and therapy. An upsurge in
number of patients, plethora of diseases & the requirement for vast kinds of treatment
have cemented the role of Paramedical Professionals who are expert technicians. The
rising demand of trained paramedical professionals has unlocked numerous career
opportunities for a lot of aspirants. At Wellwishers academy, there are a number of
courses in the field of paramedical science, at postgraduate, undergraduate and
diploma levels.
Career prospects: After the completion of a paramedical course, employment
avenues exist in the government hospitals, private hospitals and clinics, pathology
labs, college labs, trauma centers etc. The qualified person can work as a radiologist,
medical lab technologist, audiologist, speech therapist, physiotherapist, respiratory
therapist, etc.
1. Bachelor of Medical Laboratory Technology(BMLT) Credits : 96
2. Diploma in Medical Laboratory Technology(DMLT) Credits : 60
3. Diploma in Operation Theatre Technology Credits : 60
4. Diploma in Radiography Technology Credits : 60
Duration : 3 Years
Eligibility : 10+2 with PCB/PCM
Fees : Rs. 15000/- per Semester
Duration : 2 Years/ 3 Years
Eligibility : 10+2 with PCB/PCM / 10th with PCB/PCM
Fees : Rs.11000/- per Semester
Duration : 2 Years/ 3 Years
Eligibility : 10+2 with PCB/PCM / 10th with PCB/PCM
Fees : Rs.11000/- per Semester
Duration : 2 Years/ 3 Years
Eligibility : 10+2 with PCB/PCM / 10th with PCB/PCM
Fees : Rs.11000/- per Semester
Registration & Admission Fees : Rs 3800/-
Exam Fees : Rs2550/-
Registration & Admission Fees : Rs3800/-
Exam Fees : Rs2550/-
Registration & Admission Fees : Rs3800/-
Exam Fees : Rs2550/-
Registration & Admission Fees : Rs3800/-
Exam Fees : Rs2550/-
www.bsaitm.in • 13
Courses Offered : NIMS Guidance & Learning Resource Centre
Registration & Admission Fees : Rs3800/-
Exam Fees : Rs2550/-
5. B.Sc. in Biotechnology Credits : 96
6. M.Sc. in Biotechnology Credits : 64
Duration : 3 Years
Eligibility : 10+2 with PCB
Fees : Rs.11000/- per Semester
Duration : 2 Years
Eligibility : Graduate in related fields
Fees : Rs.21000/- per Semester
14 • www.bsaitm.in
Registration & Admission Fees : Rs3800/-
Exam Fees : Rs2550/-
The rules and regulation in force at the time a student
joins a course shall hold good only for the examination
held during or at the end of academic session. Nothing
in these ordinances shall be deemed to debar the
concerned Boards/University from amending the ordinances subsequently and
the amended ordinances i.e. if any shall apply to all the students whether old or new.
1. Candidates shall abide by the Rules & Regulations in force and those that may be issued by the Board/
University from time to time.
2. False declaration of Age, Qualification etc., by the candidate will disqualify his/her admission to the
University/Board.
3. Candidates who have not completed their qualifying exams, or who have appeared in the final exams
and awaiting results can also enroll for the Board/ University Programme. However, the result should
be submitted to the Board/ University before the first semester exam, before the last date
announced by Board/University.
4. Incomplete admission form in any respect and without requisite fee will be summarily rejected.
5. Candidates seeking admission should pay the Programme/Tuition, Registration/Examination and
Board/ University fees in full at the Institution. Please enclose a set of attested photocopies of marks
cards, certificates, date of birth certificate and other documents with the application form duly filled-
in and submit the same on or before the due/last date as mentioned in the advertisement of the
Institution.
6. No request for change of Stream/Programme will be solicited hence forth.
7. The Student should keep on visiting the web-site regularly. In case of any discrepancy, they should
bring into the notice of the Institution within a week, failing so, the Institution will not be responsible.
8. The Students should follow all the deadlines strictly given on the website.
9. Candidates have to submit attested photocopy of all the documents relevant to education
Registration / Enrollment:
14 • www.bsaitm.in
General Instructions
qualification (Xth onwards) and the date of birth proof duly attested by Gazetted Officer / Principal of
School or college.
10. The Board/ University reserves the right to change the course curriculum whenever it will be felt that
the change/ modification could best serve the interest of students and the potential employers from
time to time. The Institution will not be responsible for any change, however, it will follow the syllabi
as prescribed.
11. The information given is an indication of the Board’s/ University's plans as on date of publication of
this document. Details can be modified from time to time for academic and operational reasons. The
students will be governed by latest regulations applicable to them during academic year. The
Institution will not be responsible for any change, however, it will strictly follow the laid down rules
as prescribed.
12. The Institution will not refund fees once paid to the eligible candidates under any circumstances.
13. No application form for admission received after the last date specified for the purpose will be
entertained. However, in case the last date for receipt of application is a holiday or that day is
declared holiday by the Institution, the next working day will be considered as the last date for the
purpose.
14. Students are required to preserve carefully the fee paid receipt for all payments made to the
Institution, as it is the only valid document accepted. They will have to produce this copy at the time
of obtaining examination admission ticket, marks cards or relevant documents.
19. Identity Card bearing Permanent Enrollment number will be issued to every student after the
admission is finalized.
20. Medium of Instruction and Examination shall be English.
21. For Registration and Examination purposes, for the entire course, migration certificates will not be
required.
22. Extension in the last date of submission of Registration form shall be decided only by the concerned
Board/ University.
25. All legal disputes, if any, shall come under the jurisdiction of Court in DELHI.
www.bsaitm.in • 13
Application form & Prospectus
Selection Procedure
Fees
Discounts – Candidates can avail only one discount structure
The application form and the Prospectus may
be obtained by hand from the Institution Office on cash
payment of Rs.300/- only. The Application form and the
Prospectus may also be obtained by Post. Request for this purpose may be sent to the following along
with a Bank Draft of Rs.375/- only in favour of “BSAITM” payable at New Delhi.
Candidates will be selected purely on the Merit basis, based on the marks of the eligibility
qualification mentioned in the Prospectus. Registration Fees paid will not be refunded under any
circumstances.
1. For Semester Mode courses, Fees will be charged on Semester basis. No monthly instalment scheme
is available. For Yearly mode courses, the Fees will be charged on yearly basis.
2. All fees and other dues are payable by the students in each term by the dates notified by the Director.
3. Fees once paid shall not be refunded or transferred under any circumstances.
4. Guardians of the students are personally liable for the payment of all the dues of their wards.
5. Students shall not be permitted to sit in any examination unless all the outstanding dues and next
semester/yearly fee against their names have been cleared off.
6. The Institution is not responsible for any changes of Fees by Board/ University. The students will have
to adhere with the new Fees structure of the Board/ University. However, The Board/ University will
not be under any obligation except for the Board/ University fees as prescribed by them.
a) 10% discount in Tuition Fees will be given to the candidates belonging to SC/ST/OBC/PH/Women
and BPL
Rules & Regulations
14 • www.bsaitm.in
b) 25% discount in Tuition fees for weekend classes/CET/AIEEE appeared candidates.
The Institution will follow the Government rules strictly.
The minimum compulsory attendance for students has been fixed at 75% of the actual number of working
days is each class/ period.
1. Trainees are liable for discharge on account of unsatisfactory progress in training
2. For acts of indiscipline and misconduct.
3. If attendance percentage falls below 50%.
4. The pending investigation of allegations against him/her.
1. Once the student is admitted, he has to pay the course fees in full as scheduled.
2. Students are ought to be regular and punctual at lectures, demonstrations, seminars, practical, field
work and such other academic exercises. They are required to attend all the allotted working periods
in each of the prescribed subjects.
3. Students whose conduct, attendance or progress is not satisfactory, will not allowed to appear in the
examination and their names will automatically struck off from the rolls.
4. Ragging in any form is prohibited in and near-by the campus. Any student found involved in any form
of ragging will be subjected to disciplinary action.
5. Students should maintain a sense of decorum and discipline inside the Institution and in public
places.
Reservation & Age Limit
Minimum Compulsory Attendance
Suspensions/ Discharge
General Guidance
www.bsaitm.in • 13
Baba S
aheb A
mbedkar
Tech
nic
al Educa
tional Soci
ety
, Vik
asp
uri
, N
ew
Delh
i
Reg
istr
ati
on
5.
Graduation
BSAITM
RS. 300/-13 04 300
BABA SAHEB AMBEDKAR TECHNICAL EDUCATIONAL SOCIETYNational HQ. : BSAITM Bhawan, Plot No. 13, Bodhella, Vikaspuri, New Delhi-110018 Ph. : 011-28532901, 28532959, 28538972Fax : 011-28532966 Mobile : 9873000679, 9718000679, 9650354070email : [email protected] • URL : www.bsaitm.in