alfa | polyamide hydrocyclones · alfa | polyamide hydrocyclones hydrocyclones enable to eliminate...
TRANSCRIPT
Alfa | Polyamide hydrocyclones
Hydrocyclones enable to eliminate most of the heavy solids suspended in water. The main application is treatment of sand-loaded well-water.Built in thick molded polyamide, these hydrocyclones are not exposed to the effect of corrosion which occurs on carbon steel hydrocyclones and have a longer life span.
Drain valve. A valve enable to drain the tank easily.
Unmountable hatch. on each side of the tank, a hatch enable inside access.
Fast closing system. Fast closing flanges system, for an easy mounting an unmoun-ting .Tightness through 2 o-rings.
Drain Suspended solids drain. To be connected to sewer or outside.
OUT. Purified water
IN. Water to be treated Polyamide body. Body in thick molded polyamide.
HOW IT WORKS
Tank. The tank is big enough to be able to collect severals kilograms of solids.
Water enters the hydrocyclone on the side. It is accelerated and whirls in the conical part.
Purified water goes out through the center, to the top. Suspended solids fall in the tank.
Tank is drained by opening a valve.
Elim
inat
ion
(%)
Particles size (µm)
100
90
80
70
60
50
40
30
20
10
00 100 200 300 400 500
Efficiency : sand (density = 3) elimination percentage, according to sand particles size.
HECTRON 101, route de Canta Galet - 06200 Nice - [email protected] | www.hectron.com | tel. : +33 (0)4 93 97 02 42 | fax : +33 (0)4 93 84 86 76
Alfa 200Maximum working pressure Bar 5
Maximum temperature °C 70
Weight (empty) Kg 7
Tank volume L 2,75
Min / max pressure loss Bar 0,2 / 0,5
Cone, cover, hatch polyamide
Tank polypropylene
Seals nitrile
Screws and bolts galvanized steel(option : S.S. 316L)
MODELS
TECHNICAL SPECIFICATIONS
Flow rate (m3/h) In / out Vanne de purge
Alfa 200 1’’ 2 to 8 1’’ BSP thread 3/4’’ BSP thread
Alfa 200 2’’ 6 to 18 2’’ BSP thread 3/4’’ BSP thread
In mmDIMENSIONS
655
580
760
45
Ø18060
120
420
SAR
L au
cap
ital d
e 24
000
€ |
338
376
841
RC
S N
ice