albert f. kurbatskii
DESCRIPTION
Modeling and Simulation of Turbulent Transport of Active and Passive Scalars above Urban Heat Island in Stably Stratified Environment. Albert F. Kurbatskii Institute of Theoretical and Applied Mechanics of Russian Academy of Sciences, Siberian Branch Russia, Novosibirsk. Introduction. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/1.jpg)
Shallow Flows Symposium, TU Delft, 2003
1
Modeling and Simulation of Turbulent Transport of Active and Passive
Scalars above Urban Heat Island in Stably Stratified Environment
Albert F. KurbatskiiInstitute of Theoretical and Applied Mechanics of Russian
Academy of Sciences, Siberian Branch
Russia, Novosibirsk
![Page 2: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/2.jpg)
2
Introduction
For stratified atmospheric flows the LES models and third-order closure models should be considered as fundamental research tools because of their large computer demands.
A growing need for detailed simulations of turbulent structures of stably stratified flows motivates the development and verification of computationally less expensive closure models for applied research in order to reduce computational demands to a minimum.
![Page 3: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/3.jpg)
3
Objectives
The principal aim of this investigation is the development of turbulent transport model for the simulation of the urban-heat-island structure and pollutant dispersion in the stably stratified environment.
![Page 4: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/4.jpg)
4
ObjectivesThe algebraic modeling techniques can be used in order to
obtain for buoyant flows the fully explicit algebraic model for turbulent fluxes of the momentum, heat and mass.
The principal object of this work is the development of three-four-parametric
turbulence model minimizes difficulties in simulating the turbulent transport in stably stratified environment and reduces efforts needed for the numerical implementation of model.
cE 2
![Page 5: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/5.jpg)
5
The mathematical model of the urban heat-island
The penetrative turbulent convection is induced by the constant heat flux H0 from the surface of a plate with diameter D. It simulates a prototype of an urban heat island with the low-aspect-ratio plume (zi / D « 1) under near calm conditions and stably stratified atmosphere.
![Page 6: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/6.jpg)
6
The mathematical model of the urban heat-island
The mixing height, zi , is defined as a height where the maximum negative difference between the temperature in the center of the plume and the ambient temperature Ta is achieved.
![Page 7: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/7.jpg)
7
The mathematical model of the urban heat-island
The problem of the development and evolution turbulent circulation above a heat island is assumed to be axisymmetric.
At the initial moment the medium is at rest and it is stably stratified.
![Page 8: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/8.jpg)
8
Limitations of Laboratory
Measurements for Full-scale Simulation
There are important limitations utilized in the laboratory experiment and simulation of the real urban heat-island in the nighttime atmosphere:
Very large heat fluxes from the heater surfaces
Very strong temperature gradients that required to obtain the low aspect ratios (zi/D) and small Froude numbers.
![Page 9: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/9.jpg)
9
Governing Equations
Governing equations describing the turbulent circulation above a heat island can be written in the hydrostatic approximation at absence of the Coriolis force and radiation with use a Boussinesq approximation.
![Page 10: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/10.jpg)
10
Governing Equations in RANS-approach
TgxP
uux
U
xtD
UDi
iji
j
i
j
i
1
jjj
uxxtD
DPr
cu
xC
ScxtDCD
jjj
![Page 11: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/11.jpg)
11
Transport Equations
for heat and mass fluxes
cgx
Ucu
cuEx
Ucu
xC
uutD
cuD
gcx
Uuc
uE
cx
Uu
xuu
tD
uD
icj
ijc
icj
ij
jji
tcu
i
ij
ij
ij
ij
jji
tu
i
)1(
)1(
22
1
222
1
D
D
![Page 12: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/12.jpg)
12
Explicit Algebraic Expressions for Turbulent Fluxes
The explicit algebraic models for the turbulent heat flux vector and turbulent mass vector were derived by truncation of the closed transport equations for turbulent fluxes of heat and concentration by assuming weak equilibrium, but retaining all major flux production terms.
For turbulent stresses we applied eddy viscosity expression.
![Page 13: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/13.jpg)
13
CLOSURE: full explicit turbulent fluxes models for active (heat) and passive (mass)
scalars
.)3/2(//
.21
21
)1(
21
)1(22
2
,21
21
)1(
21
)1(22
2θ
1
22
21
2
2
1
22
21
2
ijijjit
ic
c
jj
i
i
jtc
i
j
j
itct
ciD
ijj
i
i
jt
i
j
j
itt
iT
ExUxU
cgRE
xC
x
U
x
UD
x
U
x
UD
ERxC
RE
C
gRE
C
C
xx
U
x
UC
x
U
x
UC
ECR
xR
EC
ji
j
j
uu
cu
u
stresses Turbulent
![Page 14: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/14.jpg)
14
Three-Equation ModelE - - 2
The closure of expressions for the turbulent stresses and heat flux vector is achieved by solving the equations for turbulent kinetic energy, its dissipation rate and temperature variance, resulting
in three-equation model E--2
![Page 15: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/15.jpg)
15
CLOSURE: three-equation model
for active (heat) scalar field 2θεE
.1
,
,
22
ERtDD
GtD
D
GtDED
PD
PPD
PD
21
EEE
![Page 16: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/16.jpg)
16
Four-equation modelE - - 2 - c
For the closure of expression for turbulent flux vector of a passive scalar is involved the equation for covariance concentration – temperature.
Thus, for the description of a concentration field is formulated the four-
equation model E--2-c
![Page 17: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/17.jpg)
17
CLOSURE : four-equation model
for passive scalar field θεE c2
.
1
,
,
3
22
cEtD
cD
ERtDD
GtD
D
GtDED
ccc PD
PD
PPD
PD
21
EEE
![Page 18: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/18.jpg)
18
Boundary ConditionsThe domain of integration is a cylinder of a given height H. The heated circular disc of diameter D is located at the center of the cylinder bottom.
![Page 19: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/19.jpg)
19
HEAT TRANSFER BOUNDARY CONDITIONS
At the plume axis and at its outer boundary
symmetric conditions
(/r) = (/r) = (/r) (2/r) = 0 are prescribed.
(Ur=0 at r = 0 and at r =1.8R)
At the top boundary
the zero-flux condition
V/z = /z = /z =
= 2/z = 0 is enforced.
Domain of integration
is a cylinder
rz
s o u r c e
Top boundary
Heat Flux, H0
![Page 20: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/20.jpg)
20
HEAT TRANSFER BOUNDARY CONDITIONS
The surface heat source is placed on the bottom (z = 0) has the size 0 r / D 0.5.
Boundary conditions at the bottom are specified as
heat flux H0 is prescribedvalues of E, and 2 at the first level above surface
are chosen according to Kurbatskii
(JAM, 2001, vol.40, No.10)
Domain of integration
is a cylinder
Z0
Top boundary
s o u r c e
Heat Flux, H0
r
![Page 21: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/21.jpg)
21
MASS TRANSFER BOUNDARY CONDITIONS
At the plume axis and at outer boundary,
(C/r) = (c/r) = 0.
At the top,
Constant flux of mass,
is prescribed inside a source.
At the bottom and outside of a source
Domain of integrationis a cylinder
Z
r
Top boundary
mass source
L = 0.5 D
.0// zczC
cHzCD )/(
,0 c.0/ zC
![Page 22: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/22.jpg)
MASS TRANSFER BOUNDARY CONDITIONS
The same boundary conditions are used for source of small length located at the center of a heat island.
Domain of integration
is a cylinder
Z
r
Top boundary
mass source
L=0.1D
![Page 23: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/23.jpg)
MASS TRANSFER BOUNDARY CONDITIONS
and the same boundary conditions are used for source of small length located at the periphery of a heat island.
Domain of integration
is a cylinder
Z
r
Top boundary
mass source
L= 0.1D
![Page 24: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/24.jpg)
24
Numerical Method
fzF
rF
rtzr
1
cCTEUr ,,,,,,: 2
Fr , Fz – turbulent fluxes of momentum, heat and mass
Semi-implicit alternating direction scheme
nn
zn
rnji
nji
nn
zn
rnji
nji
fzF
rF
rt
fzF
rF
rt
12/1,
1,
2/1,
2/1,
12/
12/
![Page 25: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/25.jpg)
25
Numerical Procedure
The numerical method
uses a staggered mesh.The difference equations
are solved by the three-diagonal-matrix algorithm.
Staggered mesh
z
r
z
0
r/2
r
z/2
Ur Uz
E, , T, <2>, C, <c>
![Page 26: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/26.jpg)
26
Main Results of SimulationThe results of simulation correspond to a
quasi-steady state of circulation over an area heat source in stable stratified environment.
Figure (c): shadowgraph picture at t = 240 sec when the full circulation is established.
![Page 27: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/27.jpg)
27
![Page 28: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/28.jpg)
28
Calculation of Normal Turbulent Stresses
In this problem a simple gradient transport model preserves certain anisotropy of the normal turbulent stresses
rU
Eu rtr 2
322
zU
Eu ztz 2
322
2Ect is turbulent viscosity.
![Page 29: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/29.jpg)
29
![Page 30: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/30.jpg)
30
![Page 31: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/31.jpg)
31
RESULTS: Temperature profiles Calculated temperature
profiles inside the plume have characteristic “swelling”:
the temperature inside the plume is lower than the temperature outside at the same height creating an area of negative buoyancy due to the overshooting of the plume at the center.
This behavior indicates that the plume has a dome-shaped upper part in the form of a “hat”.
![Page 32: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/32.jpg)
32
![Page 33: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/33.jpg)
33
![Page 34: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/34.jpg)
34
Pollutant Dispersion
Investigation of buoyancy effects on distribution of mean concentration in mixing and inversion layers of urban heat island was the main goal in modeling and simulation of pollutant dispersion from a continuous surface source.
![Page 35: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/35.jpg)
35
Pollutant Dispersion
Experimental measurements were not available for the quantitative validation of simulation data.
Instead, we present some preliminary results that illustrate interesting properties of pollutant dispersion from a continuous source located inside the urban heat island and on its periphery.
![Page 36: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/36.jpg)
36
![Page 37: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/37.jpg)
37
![Page 38: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/38.jpg)
38
![Page 39: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/39.jpg)
39
Pollutant Dispersion
One characteristic feature is observed in all three cases. The contaminant penetrates not only into the inversion layer but even higher beyond its boundary.
This behavior was recently reproduced in the laboratory experiment of Snyder et al. (BLM,2002, vol.102, 335-413.). These experimental data clearly show penetration of the continuous buoyant plumes into inversion above the convective boundary layer.
![Page 40: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/40.jpg)
40
Difference in Turbulent Diffusion Between Active and Passive Scalars 1
Sometimes assumed that in the stratified atmospheric boundary layer the eddy diffusivity of heat (KH) is equal to the eddy diffusivity of contaminant (KC). However, the stratification causes a larger difference in the eddy diffusivities between active heat and passive mass.
Indeed, for the ratio of the vertical eddy diffusivities of heat and mass can be written the following expression
![Page 41: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/41.jpg)
41
Difference in Turbulent Diffusion
Between Active and Passive Scalars 2 [1g <cC/z)]
[1 g <2/z)]
If both mass and heat are passive additives (the buoyancy terms in this expression are negligible) then it is evident from this expression that KC=KH.
It appears that cases for which the largest deflection of KC/ KH
from unit will occur are when either T or C is acting as a passive additive.
In our case the mass is acting as a passive additive.
Hc KK /
![Page 42: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/42.jpg)
42
Turbulent Fluxes of Active and Passive Scalars
![Page 43: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/43.jpg)
43
Ratio of Eddy Diffusivities of Passive Mass to that Active Heat
![Page 44: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/44.jpg)
44
CONCLUSIONS 1CONCLUSIONS 1
The three-equation model of turbulent transport of heat reproduces structural features of the penetrative turbulent convection over the heat island in a stably stratified environment.
This model minimizes difficulties in describing the non-homogeneous turbulence in a stably stratified environment and reduces computational resources required for the numerical simulation.
![Page 45: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/45.jpg)
45
CONCLUSIONS 2CONCLUSIONS 2
The four-equation model for the description of pollutant dispersion in the stable stratified atmospheric boundary layer is formulated.
Favorable comparison the numerical results of pollution dispersion from the continuous surface source above the urban heat island with laboratory measurements in the convective boundary layer showing penetration of the continuous buoyant plumes into inversion above the convective boundary layer is found.
![Page 46: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/46.jpg)
46
The friction velocity u(r) / wD
The friction velocity on the underlying surface can be obtained on the calculated mean velocity as u (r) = ( Ur / z ).
![Page 47: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/47.jpg)
47
Turbulent Velocity Scale
Turbulent velocity scale Uf was estimated as 1/30 of “a mean wind velocity ” – velocity scale wD of the mean inflow velocity: Uf 1/30wD. This value was used as characteristic scale of the turbulent velocity for boundary conditions for E1 and at the first level of a grid above an underlying surface.
![Page 48: Albert F. Kurbatskii](https://reader036.vdocuments.us/reader036/viewer/2022062408/568140b0550346895dac710d/html5/thumbnails/48.jpg)
48
Numerical Procedure
It took about 2.8·104 time steps to drive the numerical solution to a quasi-steady state.
Computations were performed on a mesh with 25 (and 50) points in radial direction.
In vertical direction 116 (and 232) mesh points were used.
The time step was chosen so that the numerical accuracy was preserved.