aisg apm webaisg-apm antenna power meter this antenna line device (ald) can be easily...

2
AISG-APM Antenna Power Meter This Antenna Line Device (ALD) can be easily retrofit mounted onto the AISG connector of the RET activator motor. The APM is automatically detected by the Primary CCU or Node B.  The APM receives transmitted signals from the GSM/UMTS antenna and divides it into multiple frequency bands and  filters these signals and then converts them into digital levels in a 10 bit resolution.  Fully compatible with AISG V2.0 only 3 extra vendor specific com- mands are needed to read the power levels for max 3 frequency bands and report them to the Primary. With the APM the carrier can now really monitor in which frequency his antenna is transmitting and what the ERP power level really is. The APM is available with build in wide range antenna and two options for remote antennas AISG-APM key features: Measures real RF power transmitted by the antenna. Quick and easy installation on antenna. AISG version 2.0 Compliant (virtual RET) Field upgradable to future AAS and CAD specifcation. Made in the Netherlands | www.spaa05.com | [email protected] | +31 416 565 005 SPAA05.com Antenna alignment solutions for professionals ®

Upload: others

Post on 26-Jan-2021

5 views

Category:

Documents


0 download

TRANSCRIPT

  • AISG-APMAntenna Power Meter

    This Antenna Line Device (ALD) can be easily retro�t mounted onto the AISG connector of the RET activator motor. The APM is automatically detected by the Primary CCU or Node B.  

    The APM receives transmitted signals from the GSM/UMTS antenna and divides it into multiple frequency bands and  �lters these signals and then converts them into digital levels in a 10 bit resolution.  

    Fully compatible with AISG V2.0 only 3 extra vendor speci�c com-mands are needed to read the power levels for max 3 frequency bands and report them to the Primary.

    With the APM the carrier can now really monitor in which frequency his antenna is transmitting and what the ERP power level really is. The APM is available with build in wide range antenna and two options for remote antennas

    AISG-APM key features:

    Measures real RF power transmitted by the antenna.

    Quick and easy installation on antenna.

    AISG version 2.0 Compliant (virtual RET)

    Field upgradable to future AAS and CAD specifcation.

    Made in the Netherlands | www.spaa05.com | [email protected] | +31 416 565 005

    SPAA05.comAntenna alignment solutions for professionals

    ®

  • AISG-APM Technical speci�cations

    Made in the Netherlands | www.spaa05.com | [email protected] | +31 416 565 005

    CommunicationAISG Protocol V 2.0

    Connectors8-pin circulair connector conforming to IEC 60130-9 Ed. 3.0

    MechanicsDimensions: length 5.0 cm width 3.3 cm height 4.2 cmWeight: 0.080 kg

    Measurement RangeFrequency bands: 850,960,1880 MHz 1900,2100,2500 MHzNetworks: GSM,DCS,PCS UMTS,WIMAX,LTEAcuraccy: 10 BitsSensitivity: 0.293 mV

    PowerType: DC 10 - 30V power consumption: 4 mA

    EnvironmentalOperating temperature: -40°C to 125°C (-40°F to 257°F)Storage temperature: -40°C to 125°C (-40°F to 257°F)Humidy: 95% non-condensingProtection: IP68

    Feature• Compatible with future extention specification A.A.S.• Compatible version 2.1 extention specification C.A.D.• Version with lightning protection available

    Our free Test Tilt software has been upgraded so it can also test both AIM and APM modules, samples are available.

    © Copyright 2010, SPAA05.com. All rights reserved. Speci�cations subject to change without notice.SPAA05, SPAA05.com, SPAA05-MTS and their respective logos are registered trademarks of SPAA05.com.Made in the Netherlands. Patent pending.

    SPAA05.comAntenna alignment solutions for professionals

    ®

    MEMBER OF