airborne day & night imaging - uav propulsion tech€¦ · airborne day & night imaging the...
TRANSCRIPT
AIRBORNE DAY & NIGHT IMAGING
The information contained in this document is furnished in confidence. Possession hereof in no way constitutes any rights to use, reproduce or disclosethe document, in whole or in part, except as authorized by DST Control AB. Copyright DST Control AB as per date of issue hereof. All rights reserved.
North American Re-seller located in Tampa, FL USA
Production• CNC milling machine• FDM machine (3D-printer)• Water cutting machine• Laser engraving / cut
Test envirnoment• Climate chamber• Vibration tabel
DST CONTROL
IN-HOUSE DEVELOPMENTPRODUCTION & TESTS
DST CONTROL
OUR PRODUCTS
ConfigurableRapid deliveriesBest price vs. performance ratio – point stability, steady image at long rangeMaximum exportability, no ITARLight-weight
DST CONTROL
PRODUCT CHARACTERISTICS
Manufacturer of UAV systemMainly European customersEverything from small (5-10 employees) to very big (1000+) companiesHigh level of technical competence, hence limited support required
DST CONTROL
OUR CUSTOMERS200+ gimbal system soldOver 50+ UAV projectsSold in 40+ countriesReturning customersWell known player
The higher demands on the ability to see and detect under difficult conditions,the higher the requirements of pointing stability, detection distance, photonsensitivity and bandwidth
of which follows...
Specialized sensors, micro mechanical precision components, advancedsoftware and electronics hardware, heavier, larger and more complex systems.
DST CONTROL
THE CURSE OF PHYSICS
DST CONTROL
OTUS-U250
Our largest gimbal with four axis multi sensorgyro stabilization
New level of stabilization <50 μrad due to acombination of purpose-built high-bandwidthtorque motors and geared motors.
Weight from 7-12 kg / 15.43-26.46 lbs
Multiple choice of sensors
DST CONTROL
OTUS-U250
• EO- and IR-cameras• Laser range finders, pointers, etc.• Complete 3 dimensional IMU mounted on
the optical bench• Video processor• Video tracker capability• Direct torque drive• Customized for different sensor
configurations
DST CONTROL
OTUS PERFORMANCE
Gimbal system:De-stabilisation:Feedback res.:Weight:Power supply:Com. Interface:Video interface:
2-axis / 4-axis, direct drive
< 100 µrad / < 50 µrad
0.036°
1-10 kg
18-36 VDC
RS-485
PAL, NTSC, HD
DST CONTROL
OTUS ACCESSORIES
OTUS HEL-MOUNTMechanical dampers
OTUS CABLE KITSCables for all your requirements
OTUS HAND CONTROL UNITErgonomic control of the gimbal
Automatic Video Tracker
Geo-location / Geo-tracker
Laser Pointer, Laser Illuminator, Laser Ranged Finder
Low Temperature Option
DST CONTROL
GIMBAL OPTIONS
The Automatic Video Tracking Optionmeans that the OTUS gimbal will havea software function capable oflocking the LOS onto a specifiedobject in the image.
Hence a moving object on the groundwill remain locked onto the centre ofthe OTUS video or IR image at alltimes, provided the optical featuresmeet certain requirements.
DST CONTROL
AUTOMATIC VIDEO TRACKER
The Geo-Location Option means that the OTUS gimbal will have asoftware function capable of outputting the GPS position of the viewedobject centred in the video or IR image. For this function to work, it isrequired that two external sensors are connected to the gimbal:1. An external GPS sensor providing the position of the vehicle (e.g. theposition of the base of the gimbal).2. An external heading source providing the heading of the vehicles (e.g.the heading of the base of the gimbal).
DST CONTROL
GEO-LOCATION
Geo-Tracking Option means that the OTUS gimbal will have a softwarefunction capable of locking the LOS onto a GPS geographical position on theground. Hence the gimbal can be commanded to move to and maintain anygiven geographical position centred in the image.
This option assumes that the Geo-Location Option is enabled.
DST CONTROL
GEO-TRACKER
Laser Range Finder (50 m to 4000 m): a device used to measure thedistance to an object by measuring the time of flight for a laserbeam emitted by the sensor and reflected by the object.
Laser Pointer & Laser Illuminator: a device that sends a laser beamto point out an object. The device is available with a wide variety ofspecifications depending on customer demands.
DST CONTROL
LASER ACCESSORIES
The Low Temperature Option means that the OTUS Gimbal Unit is equippedwith an internal heating element to ensure proper operation of payloadsthat otherwise unable to operate at lower temperature. The lowest possibleoperating temperature is -40°C.
DST CONTROL
LOW TEMPERATURE
Completely backlash free solution withdirect drive for outstandingperformance and stability
Complete 3 dimensional IMU mounted onthe optical bench
Minimum maintenance requirement, dueto novel hybrid drive solution
High bandwidth for vibrationattenuation
All electronics embedded within theunit
DST CONTROL
WHY CHOOSE OTUS
Integrated accessories, e.g. laser rangefinder.
Maximum exportability with worldwidedelivery
Lightweight from 1.5 kg / 3.3 lbs
Multiple choice of sensors
Market leading price ratio
Contact Info (North American Re-seller)