aio mi sheet 22dec2017 - lighting.philips.com · all in one solar streetlight ip-65 ta 35...
TRANSCRIPT
SunStay Installation Instructions
All in one solar streetlight
IP-65ta35
Dimensions
369
68
4
769
3883
156
Precaution:1. Maximum installation height luminaire from gorund is 5meters.2. Before installation check if luminaire is glowing by pressing the switch on housing.3. After three months of manufacturing, check if luminaire is the glowing (by switch), if it is not working then contact customer care.4. This luminaire will not operate below 0 degree ambient.
10.5 Kg (3000 lumen)
Remove shrink wrap and protective cover before installation.
For vertical mounting unscrew and removepole mounting bracket and assemble it asshown in Fig. B.
For tilt mounting to suit various geography, luminaire can be tilt mounted from 0 to 15 deg
Mount the luminaire with pole, tighten the bolts with torque of 8 Nm.
Horizontal Mounting
Vertical Mounting
For accurate angle positioning, match polemarks mounting piece marking with luminaire marking
To switch ON the luminaire press the switch button shown in below �gure.
Switch
0°-15°
Fig. B
Fig. A
Shrink wrap
Protectivecover
Pole Dia:50 to 60mm
5° 10°
15°
0°
1
4
2
3
5 6
Speci�cations
Type
Net Weight
Lamp
IP Classi�cation
Voltage
Max. Projected Area
Application
PIR Sensor
Battery Type
Luminiare CCT
Solar Street Light
BRP710
LED(2000 lumen)
12 V DC
IP 65
9 Kg (2000 lumen
0.286 m²
LiFePO4
Available
5000 K- 6500 K