agilent technologies 16700b and 16702b logic analysis …agilent technologies’ 16700 series logic...
TRANSCRIPT
Agilent Technologies 16700B and 16702B Logic Analysis Systems
Advanced Test Equipment Rentalswww.atecorp.com 800-404-ATEC (2832)
®
Established 1981
2
Agilent Technologies’ 16700 Series logic analysissystems help design teamsovercome time-to-marketobstacles and meet toughengineering challenges—frombasic circuit board turn-on tovalidating signal integrity.
With their wide variety ofmeasurement capabilities, the16700B and 16702B high-performance modular systemsenable you to rapidlyconsolidate data into meaningfulinsight while giving you the mostcomplete view of your system’sbehavior. And since accurateacquisition starts with probing,we also offer reliable,unobtrusive probes that make iteasy to connect your Agilentlogic analyzer to your systemunder test.
As the innovator of logicanalysis, Agilent (formerlyHewlett-Packard) continuesto provide leading-edgesolutions that evolve withyour changing needs. Themodular form factor ofthe 16700 Series is thekey to their long-termvalue. You purchase onlythe capability you neednow, then expand as yourneeds evolve.
Configuring these modularsystems is as easy as 1, 2, 3.Select your choice of productsthat will (1) Connect, (2) Acquire, and (3) View/Analyzethe data from your system undertest. For example, you canchoose the timing/state logicanalyzer modules, oscilloscopeand pattern generator modulesand data post-processing andprotocol tools that meet yourspecific needs.
From basic board turn-on tosignal integrity validation
Introduction
www.agilent.com/find/la-systems
Figure 1. The 16700B and16702B high-performancemodular systems enable youto rapidly consolidate datainto meaningful insight.
Figure 2. The AgilentTechnologies’ 16700 Series logicanalysis systems help designteams meet tough engineeringchallenges—from basic circuitboard turn-on to validatingsignal integrity.
connect1 2 3acquire view & analyze
3
connect1 2 3acquire view & analyze
The power and flexibility to provide themost complete view of system behavior
Modular Systems
Agilent Modular 16700 Series Logic Analysis System Mainframes
Agilent Technologies’ modularlogic analysis systems providethe ultimate power and flexibilityto match your digital systemdebug needs. Configure a logicanalysis system that provides acomplete view of your system’s
behavior. Select the measure-ment modules, probing andanalysis options suited for yourspecific application that resultsin efficient debug and validation.
• Configure a basic or multi-framesystem suited to your needs
• Protect your investment with asystem that adapts to multiple,current and future projects
• View cross-domain measurements,correlated in time
• Easily master powerful logic analysis capabilities with the16702B’s touch-screen interface
Model No.
Interface Control
Measurementcapability
Timing and state analysis, pattern generation, oscilloscope
16700B and 16702BOptions
Option 001 – Add 17-inch 1280 x 1024 monitor Option 003 – 256 MB system RAM, 4 MB video RAM Option 008 – 18 GB external data drive Option 009 – external removable hard drive Option 012 – multiframe module
16702B Modular System
Touch screen, knobs, and dedicated hot keys (mouse, keyboard
also provided)
16700B Modular System
Mouse, keyboard
16701B Expansion Frame
N/A
Number of Slots 5 5 5
Display Type(s) andResolution
Internal: 12.1 inch color touchscreen, 800 x 600
External: Supports resolutions up to1600 x 1200 with option 003.
Requires external display.Supports up to 1280 x 1024
standard, 1600 x 1200 requiresoption 003.
N/A
Data Viewing Types
Standard: Waveform, listing, histogram, chart, compare
Module specific: eye diagrams
Optional software tool sets: source code, protocol decode,serial analysis, system performance analysis (SPA)
N/A
Connectivity
Time-correlate logic analyzer trace to external Infiniium 54800 Series oscilloscope.Automated de-skew and tracking of markers.
Offline analysis, e-mail on trigger, individual user logins for network security
Remote programmability via Microsoft ® Active X/COM for PCs and TCP/IPsocket based ASCII commands for UNIX ®.
Remote access of the analyzer from a web browser (web-enabled).
File transfer and storage via mapped shares or mounted drives (Windows® and UNIX)
N/A
4
www.agilent.com/find/la-systems
Logic Analyzer Probing Solutions
Probing Method(Application)
Signal Type Max. DataRate
Min. SignalAmplitude
Model Number
Channels Logic AnalyzerCompatibility
Equivalent LoadCapacitance
ConnectorlessProbingQuick connectionto many signals ina small footprintwithout requiringa header designedinto the target
Differential or single-endedclock, Single-ended data
Differential or single-ended clock,
Differential or single-ended data
Single-ended clock, Single-ended data
> 2.5 Gb/s
250 mV p-p
Vmax– Vmin200 mV
500 mVp-p
E5390A(Soft touch)
E5387A(Soft touch)
E5394A
(Soft touch)
34
17
34
90-pin cableconnector
40-pin cable
connector
< 0.7 pF
< 0.7 pF
ConnectorProbingQuick connectionto many signalsin a smallfootprint,connector isdesigned intotarget
Differential or single-endedclock, Single-ended data
Differential or single-ended clock,
Differential or single-ended data
Single-ended clock, Single-ended data
1.5 Gb/s
600 Mb/s
[1]
250 mV p-p
Vmax–Vmin200 mV
300 mV p-p
500 mV p-p
500 mV p-p
250 mV p-p
500 mV p-p
E5378A (100-pin Samtec)
E5379A (100-pin Samtec)
E5380A (38-pin Mictor)
E5385A(100-pin Samtec)
E5346A(38-pin Mictor)
E5339A(38-pin Mictor)
E5351A [2]
(38-pin Mictor)
34
17
34
34
34
34
34
90-pin cableconnector
40-pin cableconnector
1.5 pF
3 pF
Flexibility and choice in creating qualityconnections to your target system
Agilent Logic Analyzer Probing Solutions
• Easily connect with reliable,electrically and mechanicallyunobtrusive probing solutions
• Achieve low loading (< 0.7 pF), an easy connection and a smallfootprint with soft touchconnectorless probes
• Gain access to individual, widelydispersed signals with Agilent's
new differential and single-ended general-purpose lead sets.
Accurate measurements startwith reliable probing. AgilentTechnologies offers a widevariety of probing accessoriesthat support general-purposeand application-specificmeasurement needs.
Figure 3. Agilent’s soft touch probescombine high-density, low loadingand differential capability into areliable, space-saving package.
[1] Equivalent to the data rate of the logic analyzer the probe is attached to.[2] Requires isolation networks installed on the target.
connect1
General-Purpose Flying-Lead SetFlexibleconnection toindividual signals
Differential or single-endedclock, Single-ended data
Differential or single-endedclock, Differential data
Single-ended clock,Single-ended data
1.5 Gb/s
[1]
250 mV p-p
Vmax–Vmin200 mV
600 mV p-p
E5382A
E5381A
E5383A
17
17
17
90-pin cableconnector
40-pin cableconnector
1.3 pF
0.9 pF
1.5 pF
1.5 pF
3.0 pF
5
Model No. 16760A[4] 16753A/54A/55A/56A[4] 16750B/51B/52B 16740A/41A/42A
Channels/Module(Max. Channels onSingle Time Baseand Trigger)
34(170)
68(340)
68(340)
68(340)
Supported SignalTypes
Single-ended,Differential
Single-ended,Differential
Single-ended Single-ended
Setup/HoldWindow(With Eye Finder),AdjustmentResolution
500 ps,10 ps
1 ns (600 ps typical),80 ps typical
1.25 ns,100 ps
1.25 ns,100 ps
Eye Scan Yes Yes N/A N/A
Max. TransitionalTiming Rate
400 MHz 600 MHz 400 MHz 400 MHz
Max. MemoryDepth (Half/FullChannels)[1]
128M/64M[2] 16753A: 2M/1M16754A: 8M/4M
16755A: 32M/16M16756A: 128M/64M
16750B: 8M/4M16751B: 32M/16M16752B: 64M/32M
16740A: 2M/1M16741A: 8M/4M
16742A: 32M/16M
High-SpeedTiming Zoom[3]
N/A 4 GHz (250 ps) with64 K depth
2 GHz (500 ps) with 16 K depth
2 GHz (500 ps)with 16 K depth
Max. TimingSampling Rate(Half/FullChannels)
800 MHz (1.25 ns)
1.2 GHz (833 ps) /600 MHz (1.67 ns)
800 MHz (1.25 ns) /400 MHz (2.5 ns)
800 MHz (1.25 ns) /400 MHz (2.5 ns)
Max. State Clock 1.5 Gb/s 600 MHz 400 MHz 200 MHz
Configure custom measurement solutionsfor demanding applications
Measurement Modules
A wide variety of timing andstate analysis modules providethe speed and memory depth toisolate and analyze your debugproblems. Create a customsolution or expand your existinganalysis system by selecting thetiming/state analyzer, patterngenerator, or oscilloscopemodules that meet your debugand validation needs.
• Choose from a wide variety ofmeasurement modules
• Acquire differential and single-ended signals with state analysisup to 1.5 Gb/s, 4-GHz timingzoom and memory depths up to 128 M samples
• Quickly validate signal integritywith hundreds of simultaneouseye diagrams
Module Ordering Information for Agilent state and timing modules
[1] Increased memory depth in half-channel timing mode only [2] 128 M in half-channel 1.25 Gb/s and .5 Gb/s modes only[3] All channels, all the time, simultaneous state and timing through same probe[4] Probes ordered separately
NOTE: Probes are ordered separately. Please specify probes when ordering to ensure the correct connection betweenyour logic analyzer and the device under test.
2 acquire
Figure 4. Modularity providesconfiguration flexibility tomeet your measurementneeds, now and in the future.
90-pin cable connector 40-pin cable connector
6
Scopes, Pattern GeneratorAgilent oscilloscopes for 16700 Series
www.agilent.com/find/la-systems
16720A
Maximum clock speed
Memory depth
Channels per module
Maximum number ofchannels per time base
Stimulus commands
Logic levels supported
Ordering information
Half channels
300 MHz
16 M vectors
24
120
Initialize, block, repeat, and break macros
5 V TTL, 3 state TTL, 3 state CMOS, 3 state 3.3V, ECL, 5 V PECL, 3.3 V LVPECL, 3 state 2.5 V,
3 state 1.8 V, LVDS
Order at least one clock pod for eachmodule used as a master and at least
one data pod for every 8 output channels
Pod options for 16720A
Option 011 TTL clock pod & lead setOption 013 3 state TTL/CMOS data pod & lead setOption 014 TTL data pod & lead setOption 015 2.5 V clock pod & lead setOption 016 2.5 V 3 state data pod & lead setOption 017 3.3 V clock pod & lead setOption 018 3.3 V 3 state data pod & lead setOption 021 ECL clock pod & lead setOption 022 ECL (terminated) data pod & lead setOption 023 ECL (unterminated) data pod & lead setOption 031 5 V PECL clock pod & lead setOption 032 5 V PECL data pod & lead setOption 033 3.3 V LVPECL clock pod & lead setOption 034 3.3 V LVPECL data pod & lead setOption 041 1.8 V clock pod & lead setOption 042 1.8 V 3 state data pod & lead setOption 051 LVDS clock pod & lead setOption 052 LVDS data pod & lead set
Full channels
180 MHz
8 M vectors
48
240
Model No. 16534AOscilloscope
Module
Infiniium 54800 Serieswith E5850A TimeCorrelation Fixture
Oscilloscope Type
Maximum Bandwidth
Maximum Sampling Rate
Maximum Memory Depth
Channels PerOscilloscope
Maximum Number ofChannels on a SingleTime Base and Trigger
Internal Module
500 MHz
2 GSa/s
32 K
2
8
External
6 GHz
20 GSa/s
32 M
2 and 4
4
2 acquire
Agilent Pattern generator module for 16700 Series
Figure 5. Unleash thesynergistic power of ahigh-performancelogic analysis systemand oscilloscope withthe E5850A timecorrelation fixture.
Figure 7. Validatecorrect hardwareoperation by viewingtiming relationshipsbetween multiplebuses and signals.Individually color andsize the signals/busesto highlight anddifferentiate areas ofinterest.
Figure 8. Identifyproblem signalsquickly by using eyescan to make eyediagram measurementson up to hundreds ofsignals simultaneously.
Figure 9. View data patterns and sequences of events from thelisting display which presents data in the same order it wascaptured and placed into memory. The captured binary datacan be inverse assembled into processor mnemonics ordisplayed in multiple formats—binary, hex, decimal, octal,twos complement, ASCII or symbols.
Figure 10. Correlate yourlogic analyzer trace to thehigh-level source codethat produced it. Easilyset up your next logicanalyzer trigger by simplypointing and clicking on aline of source code.
7
Figure 6. The 16700 Seriesprovides the most completeview of your system’s behavior.
3 view & analyze
8
www.agilent.com/find/la-systems
connect1 2 3acquire view & analyze
9
12.1-inch (307.34 mm) LCD display with 16702B touchscreen makes it easy to view a largenumber of waveforms or states.
Select a modifiable variable bytouching it, then turn the knob toquickly step through values forthe variable.
Dedicated hot keys give instantaccess to the most frequentlyused menus, displays, and on-line help.
Dedicated knobs for horizontaland vertical scaling and scrolling.Adjust the display to get just theinformation you need to solveyour problem.
“Touch Off” button disables thetouch screen and allows you topoint out anomalies to acolleague without altering thedisplay settings.
Dedicated knobs for globalmarkers help track down toughproblems. A symptom can beseen in one domain (e.g., timing)tied to its cause in anotherdomain (e.g., analog).
10
System Performance Analysis Serial Analysis
Model No.
Application
Capabilities
B4600B
Optimizing your targetsystem’s performance
Generates statistical bar chart and histograms of
captured data
Shows the amount of timespent in each of the targetedfunctions or data locations
B4601B
Solving your serialcommunication problems
Converts serial bit streamsto parallel format for easy
viewing and analysis
Supports serial data andprotocols that use bit
stuffing to maintain clocksynchronization
Tool Development Kit
B4605B
Customizing the display ofyour acquired data for
greater insight
Creates custom tools toanalyze your data using
C programming language
Source Correlation
B4620B
Correlates the logic analyzertrace with the high-level source
code that produced it
Provides ability to define thecapture event by simply clicking
on a line of source code
Figure 11. Profile your targetsystem's performance to identifysystem bottlenecks and areasneeding optimization.
Logic analyzers with deepmemory can generate largeamounts of acquired data.Analysis of all this data is achallenge without application-specific analysis tools. AgilentTechnologies post-processingtool sets provide powerful data-analysis capabilities that willhelp you gain insight from youracquired logic-analysis datamore quickly and efficiently.These tools expand the power of your Agilent 16700 Serieslogic analysis system by movingbeyond the traditional analysisof timing waveforms and state listings.
• Rapidly consolidate largeamounts of data into displaysthat provide insight into yoursystem’s behavior
• Correlate a logic analyzer tracewith the high-level source codethat produced it
• Profile your target system’sperformance to identify systembottlenecks and isolate areasneeding optimization
Quickly extract valuable informationfrom your trace data
Post-processing Tool Sets
Agilent post-processing tool sets
www.agilent.com/find/la-systems
3 view & analyze
Figure 12. Enhance yourprotocol debug by viewingtrace information at theprotocol level.
• Display logic-analyzer traceinformation at the protocol level
• Easily trigger on standard orcustom packet header fieldswith powerful trigger macros
• Customize the protocol analysisto your specific proprietaryprotocol using a protocoldescription language
Agilent Technologies protocoltool sets for the 16700 Seriesprovide customized triggeringcapabilities and packet decode.This enables rapid analysis anddebug of industry-standard andproprietary protocols. You’ll gainquick insight into the difficultproblems caused by the use ofserialized and narrow sourcesynchronous buses in high-speedchip-to-chip and backplaneinterconnects.
Faster triggering and viewing of protocol data in a standardized form
Protocol Tools
11
PCI ExpressV1.0,
updated asspec evolves
Serial ATAand ATAPI,
OOBsignaling
(real time) upto 1.5 GHz
RapidIO(8 and 16
bit parallel)
POS PHY L4 (SPI-4.2)
(PPP, ATM,Ethernet, etc.)
GigabitEthernetTBI
Utopia L1-3(ATM),
POS-PHY L1-3(PPP),
MII/GMII(Ethernet),
FlexBus
InfiniBand1x, 4x, 12x
InfiniBand1x, 4x, 12x
MPEG-2
Model No. N4220A N4219A N4215A N4214A N4212A B4640B N4233A N4206A B4645B
PacketTrigger
Yes Yes Yes No No Yes Yes No Yes
AdditionalCapabilities
Real time8b/10b,disparity
error, datadescrambling
CRC/Disparitychecking, datadescrambling,10b capture
mode
CRC/Controlword
checking,real-timeidle filter
Real-timeidle filter
PacketCRC check,8b/10bdisparitycheck
VCRC/ICRC,8b/ 10b,disparity
error,compliance
testing.
VCRC,ICRC, 8b/
10b,disparity
error,compliance
testing.
Packetlengthcheck,packet
CRCcheck
Agilent protocol analysis tool setsfor interconnect standards
3 view & analyze
12
www.agilent.com/find/la-systems
• Actel• Altera• AMD• Analog Devices• ARM®7/9TDMI• GTE• IBM PPC• IDT• Intel® Pentium®, P4, Xeon
Pentium Pro, II, III, & Celeron™• Motorola• National• NEC• NKK• PACE• QED• Rockwell• Siemens• Texas Instruments• Xilinx• Zilog
• AGP2X, AGP4X, AGP8X• CAN• CSIX• PC 100, PC 133, DDR, DDR 200,
DDR 266, DDR 333, DDR I-400, DDR II,• Fibre Channel• FireWire (IEEE 1394)• Gigabit Ethernet (TBI)• GMII• HyperTransport• I2C• InfiniBand 1X, 4X, 12X• ISA• JTAG (IEEE 1149.1, 1149.5)• MPEG-2• PC 100/ 133 DIMM• PCI CardBus• PCI-EIO• PCI Express• PCI Mezzanine• PCI/EXT-32/64• PCI-X 1.0, 2.0• POS-PHY L1 – L3• Rambus®• RapidIO• RS-232, RS-449• SCSI, Ultra SCSI, SCSI LVD• Serial ATA• SIMM, DIMM• SPI-4.2• USB 1.1, USB 2.0• Utopia• VME 64• VXI• Xilinx: Virtex, Virtex – E, Virtex ll,
Virtex ll Pro, Spartan–ll, Spartan–ll E
• Save time making bus- andprocessor-specificmeasurements with application-specific analysis probes thatquickly and reliably connect toyour device under test
• Support available forcomprehensive list of industry-standard processors and buses
• Display processor mnemonics orbus cycle decode
Agilent Technologies and ourpartners provide an extensiverange of quality tools that offernon-intrusive, full-speed, real-time analysis and processorexecution control to accelerateyour debugging process.
Save time analyzing your unique designwith a turnkey logic analyzer setup
Processor, Bus, and FPGA Support
Agilent and Third-Party Bus,Protocol or FPGA Support
Agilent and Third-PartyProcessor Support
Figure 14. Correlate yourlogic analyzer trace tothe high-level sourcecode that produced it.Easily set up your nextlogic analyzer trace bysimply pointing andclicking on a line ofsource code.
Figure 13. Focus on PCI Expresspackets instead of format details.
3 view & analyze
13
Emulation ProbesLink to the processor’s debug port for a convenient way to download code, modifymemory and registers, and control program execution.
Model Number
ARM®ARM7TDMI, ARM7DI, ARM710T, ARM720T, ARM740T, ARM9TDMI, ARM920T,ARM922T, ARM925T, ARM940T, ARM946ES, ARM966ES
IBM PPC4XX401 (all), 403 (all), 405 (all), NPe405H, NPe405L, 440A4, 440GP, 440GX
IBM PPC6XX 603, 603e - rev 3, 4, 5, 603ev – rev 2, 12, 603e2, 603P, 603ec, 603R
IBM PPC7XX740, 740L, 740P, 750, 750L, 750P, 750CX, 750CXe, 750FX
MIPSMIPS32-4Kc, MIPS32-4Km, MIPS32-4Kp, MIPS64-5Kc
Motorola MPC6XX603, 603e - rev 3, 4, 5, 603ei, 603ev – rev 2, 12, 603e2, 603P, 603ec, 603R
Motorola MPC7XX740, 740L, 740P, 745, 750, 750L, 750P, 750M, 755
Motorola MPC74XX7400, 7410, 7440, 7441, 7445, 7450, 7451, 7455
Motorola MPC8XX801, 821, 823, 850, 852, 855, 857, 859, 860, 862, 866 families
Motorola MPC82XX8240, 8241, 8245, 8250, 8250A, 8255, 8255A, 8260, 8260A, 8264A, 8265A, 8266A
Motorola M-CoreM2107
E5900B #300
E5900B #060
E5900B #060
E5900B #070
E5900B #200
E5900B #060
E5900B #070
E5900B #110
E5900B #080
E5900B #100
E5900B #090
Add processor execution (run) control and real-time trace capture to best-in-class debuggers
Trace Port Analyzers and Emulation
• Control your processor withbreak, run, reset and single step capabilities
• Download code and modifyregister/memory values
• Trace analysis up to 200 MHz,integrated with industry-standard debuggers
• Xilinx ChipScope Pro with deep external trace andadvanced triggering tools
Agilent Technologies emulationprobes utilize a processor’sdebug port to provide aconvenient way to downloadcode, modify memory andregisters, and control programexecution. Trace port analyzersprovide real-time traceinformation, in addition to thestandard emulation functionality.When integrated with a 16700 Series logic analysis
system,both theemulation probesand trace port analyzers cansupport coordinated systemanalysis of hardware/softwareinteraction for a wide range of industry-standard embedded processors.
Agilent Trace Port Analyzers and Emulation Probes
Trace Port AnalyzersProvides emulation and real-time trace execution information, can be integrated with the16700 Series for coordinated system analysis.
Model Number
ARMARM7/9-ETM
IBM PPC4XX401 (all), 403 (all), 405 (all), NPe405H, NPe405L, 440A4, 440GP, 440GX
XilinxVirtex II, Virtex II Pro, Spartan-II, Spartan-IIE, Spartan-III, Virtex, and Virtex-E
E5904B #300
E5904B #060
E5904B #500
Figure 15. TheAgilent E5904Btrace port analyzer.
3 view & analyze
14
In Summary
Validation of digital systemscontinues to be a vital piece ofproduct development.Technologies are increasing inspeed and complexity, while R & D budgets, resources andmarket windows are shrinking.These issues make meeting your time-to-market goals more difficult.
Overcome your time-to-marketobstacles with the Agilent 16700 Series logicanalysis systems.
Related Agilent Literature
16700 Series Logic Analysis System, product overview, 5968-9661E
Probing Solutions for Logic Analysis Systems, product overview, 5968-4632E
Processor and Bus Support for Agilent Technologies Logic Analyzers,configuration guide, 5966-4365E
Agilent E5850A Logic Analyzer/Oscilloscope Time Correlation Fixture,photo card, 5988-1684EN
Infiniium 54850 Series Oscilloscopes, Infiniimax 1130 Series Probes, data sheet, 5988-7976EN
Infiniium 54800 Series Oscilloscopes, color brochure, 5988-3788EN
Deep Storage with Xilinx ChipScope Pro and Agilent Technologies FPGATrace Port Analyzer, product overview, 5988-7352EN
PCI Express Tools, color brochure, 5988-7780EN
Signal Integrity Solutions, color brochure, 5988-5405EN
Test Tools for InfiniBand, color brochure, 5988-2424EN
www.agilent.com/find/la-systems
connect1 2 3acquire view & analyze
Agilent 16700 Series
Figure 16. The Agilent 16700 Serieslogic analysis systems help you meetyour time-to-market demands.
15
Microsoft® is a U.S. registered trademark of Microsoft Corporation.Windows® and MS Windows ® are U.S. registered trademarks of Microsoft Corporation.UNIX® is a registered trademark of the Open Group.Intel® is a U.S. registered trademark and Celeron™ is a U.S. trademark of Intel Corporation.Pentium® is a U.S. registered trademark of Intel Corporation.ARM® is a registered trademark of ARM Limited.Rambus® is a trademark of Rambus Inc.
www.agilent.com/find/la-systems
www.agilent.com
Agilent Technologies’ Test and MeasurementSupport, Services, and AssistanceAgilent Technologies aims to maximize the valueyou receive, while minimizing your risk and prob-lems. We strive to ensure that you get the testand measurement capabilities you paid for andobtain the support you need. Our extensive sup-port resources and services can help you choosethe right Agilent products for your applicationsand apply them successfully. Every instrumentand system we sell has a global warranty.Support is available for at least five years beyondthe production life of the product. Two conceptsunderlie Agilent’s overall support policy: “OurPromise” and “Your Advantage.”
Our PromiseOur Promise means your Agilent test and meas-urement equipment will meet its advertisedperformance and functionality. When you arechoosing new equipment, we will help you withproduct information, including realistic perform-ance specifications and practical recommenda-tions from experienced test engineers. When youreceive your new Agilent equipment, we can helpverify that it works properly and help with initialproduct operation.
Your AdvantageYour Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchaseaccording to your unique technical and businessneeds. Solve problems efficiently and gain a competitive edge by contracting with us forcalibration, extra-cost upgrades, out-of-warrantyrepairs, and onsite education and training, as wellas design, system integration, project management,and other professional engineering services.Experienced Agilent engineers and techniciansworldwide can help you maximize your productivity,optimize the return on investment of your Agilentinstruments and systems, and obtain dependablemeasurement accuracy for the life of those products.
www.agilent.com/find/emailupdatesGet the latest information on the products andapplications you select.
Agilent T&M Software and ConnectivityAgilent’s Test and Measurement software andconnectivity products, solutions and developernetwork allows you to take time out of connect-ing your instruments to your computer with toolsbased on PC standards, so you can focus on yourtasks, not on your connections. Visit www.agilent.com/find/connectivityfor more information.
For more information on AgilentTechnologies’ products, applications orservices, please contact your local Agilentoffice. The complete list is available at:
www.agilent.com/find/contactus
Phone or Fax
United States:(tel) 800 829 4444(fax) 800 829 4433
Canada:(tel) 877 894 4414(fax) 800 746 4866
China:(tel) 800 810 0189(fax) 800 820 2816
Europe:(tel) 31 20 547 2111
Japan:(tel) (81) 426 56 7832(fax) (81) 426 56 7840
Korea:(tel) (080) 769 0800(fax) (080)769 0900
Latin America:(tel) (305) 269 7500
Taiwan:(tel) 0800 047 866 (fax) 0800 286 331
Other Asia Pacific Countries:(tel) (65) 6375 8100 (fax) (65) 6755 0042Email: [email protected] revised: 9/17/04
Product specifications and descriptionsin this document subject to changewithout notice.
© Agilent Technologies, Inc. 2004Printed in USA October 7, 20045988-8435EN
Agilent Email Updates
www.agilent.com/find/agilentdirectQuickly choose and use your testequipment solutions with confidence.
Agilent Direct