7/28/2019 AGG-200TT Spec Sheet

1/1

Specification Data Sheet | Model: AGG-200TT

Aggreko T20

TRANSCUBE Container

ADR/CSC Transport approved ISO tank container for the movement of diesel fuel on the Road.The Transcube Container is fully bunded (steel in steel) to ensure environmental compliance with Pollution Prevention Guidelines(PPG2).

ISO container approved to transport fuel on road/rail under UN, ADR, TIR Regulations.

CSC plated ISO container (Convention for Safe Container Standard).

Internal baffles to prevent fuel surge and provide safe handling and transportation at any fill level.

Corner twist locks top and bottom and forklift pockets for ease of handling (forklift empty only).

Standard 20 ISO container frame specifications for economical logistics.

Can be stacked 6 high full of fuel, reducing transport and storage space requirements.

4 sets of feed & return connections plus pump/auxiliary equipment feed. For additional security, hoses can be fed through

access holes enabling doors to be kept locked while in use.

Inner tank enclosed in steel weatherproof bund, with 110% capacity, for the storage of fuel in accordance with PPG2

Regulations. UL142 Above Ground tank and dike approved.

Pump & tank fittings all housed in lockable, vented cabinet within the bunded area and are top mounted to help prevent

leakage.

Unique fold down cabinet step for ease of access to tank fittings and pump.

Priming Pump Spec:K2 semi rotary hand pump c/w 1m inlet hose (suction) with 1 ISO A male coupler. Out manifold fitted with 1 ISO A

female coupler.

Feed & Return Specification:X2 Feed 1 ISO female coupler c/w lockable ball valve, flex dip pipe, NRV and strainer.

X2 Feed ISO female coupler c/w lockable ball valve, flex dip pipe, NRV and strainer .

X2 Return 3/4 ISO male coupler and lockable ball valve.

X2 Return ISO male coupler and lockable ball valve.

Painted in Cromadex paint 2 part primer and top coat non-isocyanate acrylic. 150mm Bitumen base on outer tank

Preparation and Finishing to Aggreko AS3-SP03.01

SpecificationStandard Tank Fittings: 2 fill: 2 vent pipe with valve: pressure vacuum vent: 8 x 1 ports for feed and return lines: gauge: 2 fitting for extra draw-off and

tank clean: bolted inspection manhole: 4 x 3 fusible caps: 2 x letterbox for hose feed. Pump and Feed / Return Specification as above

Capacity (Ltrs): 19400 Inner Tank Thickness: 6mm (minimum)

Capacity (Gal): 4270 Bund Material: 3mm (nominal)

Dimensions (mm) L x W x H: 6058 x 2438 x 2438 Design Approvals: As specified above

Weight1 Empty (Approx Kg): 5500 Design Standards: ADR. ULC142. Also COP Regulations (PPG2).

Weight1 Full (Approx Kg): 21800

Notes1Laden weight of container is based on diesel weight of 0.84 kg/litre