FUNCTIONAL DESCRIPTION

Equipment which controls the access of patrons from free area to paid area & vice versa according to business rules.

Made of a stainless steel housing.

Passenger comes in free area to purchase ticket for desired station or uses CSC.

Token issued with Zone, date,time, tom no. and station ID marked on it.

One ticket for RJCK please

Here is your token

Shows his token or CSC at Gate SMV on free area

SMV reads the token and writes Entry date,time, equipment id and station id on token or CSC

Upon reaching destination station passenger shows his token to Gate SMA on paid area.

Token is read and if found valid I.e. for time and Zone allows exit by accepting the token and opening flap

Otherwise display error message.

AFC GATE EXTERNAL VIEW

Gate aisle is formed be two gate cabinets placed next to each other

An aisle is the normal way to enter or exit to or from paid area of a station

The two gate cabinets work together to provide the required functionality

Standard middleStandard endStandard end wideStandard hybrid wideLength 1900 mm,Width 280 mm,Height

1020 mmNormal gate spacing is 550 mmWide gate spacing is 900 mm

ENTRYEXITBIDIRECTIONAL

NORMALHYBRID/WIDE

Presentation of media to SMA/SMV.Reader reads it.PID informs passenger.Validation or error tone from LS.Flap opens and passenger passes through

sensors.Passenger detection.Gate records the transaction and upload it.

• Performed through a set of 16 couples of optocells (emitter/receiver)

• Passage is split into following four zones according to sensor placement

1. Detection zone

2. Surveillance zone

3. Safety zone

4. Exit zone

In-Service : In this mode Gate can function as Entry/exit or

reversible gateMode set by: SC, GRCU, Local command from

maintenance menu of GatePID, GED and CSC R/W work according to

mode set

Out Of Service : In this mode Gate remains blocked for Entry

as well as Exit.Media validating devices are off.Mode set by: SC, GRCU, Local command from

maintenance menu of Gate.GED shows Red cross and PID displays Out of

Service.

Out Of Order : In this mode Gate remains blocked for Entry

as well as Exit.Media validating devices are off.Mode set by a fatal failure detected by the

Gate itself

Maintenance: In this mode Gate remains blocked for Entry

as well as Exit.Media validating devices are off.PID displays maintenance information to

operatorSet locally from Gate itself

Station Closed : In this mode Gate remains blocked for Entry

only.Media validating devices from Exit side work.Mode set by: SC, GRCU, Gate locally from

Maintenance menu

Emergency Open : Gate flaps open immediatelyPID display Emergency exit messagePassengers can walk freely through aisle

without ticketMode set by: SC, GRCUHas highest priority over all other 5 modes

Normal : Every entry is to be followed by an exit. Cycle has to be completed.Exit without proper entry or entry without proper exit not given.

Entry/Exit Override: Entry/exit check is disabled and multiple entry or exit provided on same ticket

Time Mode Override: Time check is disabledIncident: Exit allowed with valid tickets but fare

not detected from CSC and CST not accepted at SMA.

Fare mode set by: SC, GRCU, Gate maintenance mode

To change or view any configuration on Gate, it is necessary to enter maintenance mode

Operator has to open gate door and access the keypad.

Door opens and gate goes out of servicePress 123 to go to maintenance AccessEnter your PIN no. to access Maintenance

Menu