� Aeromech product range is highly acclaimed for it’s Aeromech product range is highly acclaimed for it’s Aeromech product range is highly acclaimed for it’s Aeromech product range is highly acclaimed for it’s Technological Superiority, Quality, Sturdy, High Technological Superiority, Quality, Sturdy, High Technological Superiority, Quality, Sturdy, High Technological Superiority, Quality, Sturdy, High Profitable production, Cost effectiveness, Low Power Profitable production, Cost effectiveness, Low Power Profitable production, Cost effectiveness, Low Power Profitable production, Cost effectiveness, Low Power Consumption and Easy maintenance. The product range Consumption and Easy maintenance. The product range Consumption and Easy maintenance. The product range Consumption and Easy maintenance. The product range of BLOWROOM machineries are of BLOWROOM machineries are of BLOWROOM machineries are of BLOWROOM machineries are Openers, Cleaners, Openers, Cleaners, Openers, Cleaners, Openers, Cleaners, Dust and WasteDust and WasteDust and WasteDust and Waste Removal EquipmentsRemoval EquipmentsRemoval EquipmentsRemoval Equipments. We proudly . We proudly . We proudly . We proudly inform that our products given as follows are running inform that our products given as follows are running inform that our products given as follows are running inform that our products given as follows are running successfully, producing best results in our customers end successfully, producing best results in our customers end successfully, producing best results in our customers end successfully, producing best results in our customers end PracticallyPracticallyPracticallyPractically

The Next Best

Aeromech Textile EngineersAeromech Textile EngineersAeromech Textile EngineersAeromech Textile Engineers •

• Range of ProductsRange of ProductsRange of ProductsRange of Products

• Openers and CleanersOpeners and CleanersOpeners and CleanersOpeners and Cleaners • 1.Pre-Mixing Openers 13. Disc Pre-Filters • 2.Bale Openers 14. Contamination Feed Conveyor Tables • 3.Bale Pluckers 15. Two Way Pneumatic Distributors • 4.Two /Three/Four Roll Openers 16. Pneumatic Dampers • 5.Gradient Cleaners 17. Air Ventilators • 6.Middle Feeders 18. Pneumatic Feeding Units • 7.Condensors 19. Single Beater Lap Machine • 8.Multi Blenders 4/6/8/10 Chambers 20. Gravity Traps • 9.Micro Dust Removers 21. Double Magnet Traps • 10.Fibre Compactors 22. Chute Feeding Units • 11. Primary and Secondary Filters 23. Clearer Roller Cleaner • 12.Panel Filters 24. Double Beater Scutcher

The Next Best

Aeromech Pre-Mixing Opener portable type comprising 3 different type of beaters with large waste chamber, adjustable Grid section gently opens cotton and or man

made fibers. User friendly, maintenance free, working width 1000mm with an output up to 1250kgs/hr. Trolley wheels to move every where and unrestricted

3/5/10 metre feed conveyor [optional] for maximum pre-mixing of bale material,

easily for contamination with low power geared motor. The Next Best

Aero Pre-Mixing Opener

Aeromech Bale Opener working width

1200mm is the latest in the series and is

most flexible for

every type of raw material and

application. Large mixing chamber

ensures thorough

mixing of individual tufts. Evener roller

incorporating lifting lattice performs tufts

opening and

blending. Feed conveyor virtually

unrestricted 5/10mtr for maximum pre-

mixing of bale

material, easily for contamination.

The Next Best

Aero Bale Opener

Aero Two Roller Cleaner

This machine is used for treatment of various grades of cotton and further cleans preliminarily opened materials. This machine adopts Twin roll with free beating. Material is fed- axial in the machine and delivered from other end. The grid bars under the rollers do the opening and cleaning. This will prevent the big dust being smashed into small tuft and ensure an earlier dedusting.

The Next Best

Aero Micro Dust RemoverAero Micro Dust RemoverAero Micro Dust RemoverAero Micro Dust Remover De-dusting is an important process in a Textile Mill. A good de-dusting

leads to considerable reduction in the micro dust accumulation in the

Rotor spinning as well as Ring

Spinning resulting in lower thread breaks and also avoid moire effect.

This machine is used as the last beating and cleaning point in the

Blow room line. The unique de-

dusting machine from Aeromech offers an excellent result that

removal of Dust and Micro dust efficiency with low power compare

with other brands..

The Next Best

Aero Synthetic Opener[ASO.1]

For Synthetic processing, the Blow room plays an important

role for quality aspects. An opener is necessary for opening

the synthetic material without

damage the fibers. Aeromech has been manufacturing ASO-1

which is well suit for Synthetic processing units. Construction

and Design is similarly to Fine

opener, except the Beater pins and Grid section. An under

casing and Mote knife provided under the beater. The beater

specially designed for Synthetic

material.

The Next Best

Aero Gravity TrapAero Gravity TrapAero Gravity TrapAero Gravity Trap Aeromech Gravity Trap uses centrifugal action to remove almost all impurities

which heavier than tufts regardless of it’s material composition. Gravity Trap can

be fitted into any duct with a constant air-

current. No moving parts, Individually adjustable Mote-knives and Steel

Segments at a foot of ‘U’ turn deflect the heavier particles down into a large

collection chamber. This machine is

maintenance free and does not need electrical power

The Next Best

Aero Multi-Blender offers an optimum solution for any

mixing task for staple fiber mixes. A fan feeds the

material into the trunks,

which are successively filled and simultaneously emptied.

The principal guarantees a maximum homogeneity of

the mixing. The transport air

entering the machine also feeds the material to the

following machine. The process of filling, mixing and

feeding are controlled by

pneumatic system

The Next Best

Aero MultiAero MultiAero MultiAero Multi----Blender[Standard]Blender[Standard]Blender[Standard]Blender[Standard]

Aero Bale Plucker Aeromech Bale Plucker is for

the initial stage for opening

raw material in Blowroom,

used for plucking bales of

various cotton grades and or

man made fibers. Cotton bales

are placed in the round circle,

the carriage rotates above the

bales with a high revoluting

beater and grids in the

carriage, the carriage plucks

the bales. For every circle of

the carriage will lower it’s

position according to pre- set

the distance. Such keep the

plucking continuously and up

to the lowest position. The

plucked tufts will sucked by

the fan in the next machine.

The Next Best

Aero Gradient Cleaner [GC6]Aero Gradient Cleaner [GC6]Aero Gradient Cleaner [GC6]Aero Gradient Cleaner [GC6] The Gradient Cleaner GC6 is a very effective machine for all types of cotton.

Six beaters arranged in rising steps at

an angle of 45* carry the tufts upwards

whilst removing a large proportion of

the heavy impurities through he grids. Fixed cross plates restrict the passage

between the beater rolls. The robust

beater blades have ‘U ‘shape despite a

severe beating action, they don’t

damage he fibers. Large window and internal illumination of the spacious

waste chamber enable the removal of

waste to be observed. Material must not

be removed from the gradient Cleaner

by immediate suction s this would impade waste removal. The machine

must eject the tufts into an air stream

drawn from the room except when it is

delivering into a feed trunk of the next

machine

The Next Best

Aero Magnet Trap [MRO]Aero Magnet Trap [MRO]Aero Magnet Trap [MRO]Aero Magnet Trap [MRO]

Magnet Trap in the ducts or machines capture Iron particles

which are entangled in the tufts.

The Double magnet trap is fitted

in the material transport duct, where possible at the start of the

line before machines with

vulnerable working elements.

Two sets of each containing 3

high power 150*100*25 Flat magnets are fitted in an Zig-Zag

section of the duct

The Next Best

Aero Dust Extract Aero Dust Extract Aero Dust Extract Aero Dust Extract

A simple means of extracting excess transport air and any

air -borne dust. Dust extract is typically installed in duct

line after the openers. Air

and Dust from material transport system passes

along a perforated section of during in dust extracted

through perforations to

central filter. Adjustable Damper controls amount of

air extraction.

The Next Best

Single Beater Lap machine [ScutcherSingle Beater Lap machine [ScutcherSingle Beater Lap machine [ScutcherSingle Beater Lap machine [Scutcher]

Single beater lap machine [scutcher] working width 1015mm sensitive almost maintenance

free, feed control by sensing lever and cone

drive with differential gear. Kricshner beater for

fine opening and cleaning, Adjustable air

supply influencing covering of the dust cage with tufts, Large dust cage diametrically

exhausted across it’s whole width to form a

compact lap of layer with high length and cross

regularity, Heavy calendar rollers

pneumatically loaded for formation of heavy laps, Calendar rollers ‘One laying on Two’ for

horizontal running of laps to avoid false drafts,

Automation for lap delivery, lap removal from

lap spindle between reserve and working

position and without interrupting production, complete automation readjust able. The

pneuma feeder provides a uniform feed to the

scutcher. An adjustable sensitive pressure

switch located in feed trunk maintains the

material level variations within tight limits.

The Next Best

DOUBLE BEATER SCUTCHERDOUBLE BEATER SCUTCHERDOUBLE BEATER SCUTCHERDOUBLE BEATER SCUTCHER

� The material from feed trunk practically rests on the horizontal feed lattice of first beater namely Three Bladed Beater. The beater is provided with a fine photo mechanism connected to the cone drive which in turn drives the feed rollers. The dynamically balanced beater with grid section and adjustable stripping rail throws the material after beating. A fresh air inlet under the beater regulates the transportation of materials.

� A pair of cages made of perforated sheet with fan and two delivery rollers consolidates and feed the material to the feed lattice of the subsequent second beater named kricshner beater. This beater is also provided with a second piano mechanism to fine tune the uniform feeding , thereby enhancing the evenness during process.

� Another pair of cages and delivery rollers feed the material to the lap forming section. The calendar rollers are vertically disposed and loaded by heavy duty springs to achieve pressures up to 5000kgs which in turn helps to produce compact and heavy laps. Doffing is done by trouble electro mechanical divice automatically.

The Next Best

Aero Chute Feeder

This machine is the main part between Blow-

Room line and Carding machine. It feed the

material through convey pipe. With pneumatic

pressure control, the upper chamber feeds the

fiber continuously and free from return fiber;

with recycle-fan blowing, the lower chamber

press fiber sheet continuously and evenly. The

pneumatic switch of upper chamber control the

feeding speed. Thus to ensure the even and

stable feed to the Carding machine and ensure

the high evenness of the sliver. Dust collecting

system is also equipped. This unique machine

from Aeromech comes with a low power

consumption with a through out put up to

90kgs/hr

The next Best

Filters and Compactors

This Series combining of First stage , Second Stage, Fiber

Compactors are used for the projects of Dust removal from process

of Blow room, Carding, Combing and serves as air circulating filter

in the Pre-spinning and Post spinning. It is also adopted in the

dusting powder polluted circumstances which mainly contain fibers.

Dust contained after treatment less than 1mg/m3.Efficiency 98%

The Next Best

Clearer Roller CleanerClearer Roller CleanerClearer Roller CleanerClearer Roller Cleaner Aeromech Clearer Roller Cleaner cleans thoroughly the fluff from the roller and collects in the chamber provided by a unique suction device. The fluff collected can be removed easily from the chamber. The clearer roller comes out on the other side completely cleaned automatically. The guide is adjustable to fit on different diameter of rollers of types of spinning machines. Save 95% of the cleaning time and labor. Low power consumption with high efficiency. Adjustable to all sizes of rollers. Transportability easy within the mill. A superior device to clean the Clearer rollers automatically. The Next Best

Aeromech Textile EngineersAeromech Textile EngineersAeromech Textile EngineersAeromech Textile Engineers

» ****************For Trade InquiriesFor Trade InquiriesFor Trade InquiriesFor Trade Inquiries****************

Mohanraaj.NMohanraaj.NMohanraaj.NMohanraaj.N---- ProprietorProprietorProprietorProprietor

Chinnagurusamy LayChinnagurusamy LayChinnagurusamy LayChinnagurusamy Lay----outoutoutout

Singanallur postSinganallur postSinganallur postSinganallur post

CoimbatoreCoimbatoreCoimbatoreCoimbatore----641 005641 005641 005641 005

TamilnaduTamilnaduTamilnaduTamilnadu----IndiaIndiaIndiaIndia

Ph:Ph:Ph:Ph: 91 422 32 36 50191 422 32 36 50191 422 32 36 50191 422 32 36 501

Mob:91 99409 26151/ 91 81446 86006Mob:91 99409 26151/ 91 81446 86006Mob:91 99409 26151/ 91 81446 86006Mob:91 99409 26151/ 91 81446 86006

E.mail: E.mail: E.mail: E.mail: aeromech_cmo@yahoo.inaeromech_cmo@yahoo.inaeromech_cmo@yahoo.inaeromech_cmo@yahoo.in / / / / aeromechcmo1@aol.com / aeromechcmo1@aol.com / aeromechcmo1@aol.com / aeromechcmo1@aol.com /

aeromech.cmo1@gmail.comaeromech.cmo1@gmail.comaeromech.cmo1@gmail.comaeromech.cmo1@gmail.com / aeromech_cmo@hotmail.com/ aeromech_cmo@hotmail.com/ aeromech_cmo@hotmail.com/ aeromech_cmo@hotmail.com

Web: Web: Web: Web: http://aeromech.webs.comhttp://aeromech.webs.comhttp://aeromech.webs.comhttp://aeromech.webs.com / aeromech.yolsite.com / aeromech.yolsite.com / aeromech.yolsite.com / aeromech.yolsite.com

T

h

The Next Best