aerogel-coating
TRANSCRIPT
TEC Corporation
Aerogel Solution -A-
AEROGEL COATING for Thermal Insu-lation.
Page 2
TEC Corporation
◈Background
Silica Aerogel can be used in coatings to improve thermal insulation and hydrophobic performance of the coatings. But it is very important to select right form of aerogel to achieve target performances.
Only a few years ago, it was impossible to mix aerogel to other materials. Due to this reason, we have developed “wet-Aerogel” which can be mixed into other materials easily. And then, we have developed two kinds of products finally!
>>WET AEROGEL BLANKET
>> Coating (AERO-COAT-300)
Page 3
TEC Corporation
KEY PRODUCTS
Specifications AEROCOAT-120 AEROCOAT-170 AEROCOAT-300
Max. heat resistance (°C) 120 170 300
Thermal Conductivity(W/m K) at 40℃
0.042 at thickness of 4.4mm
0.040 at thickness of 7.4mm
0.055 at thickness of 9.9mm
R-Value(m²K/W) 0.104 0.185 0.180
U-Value(W/m²K 9.545 5.405 5.55
Solid Content (%) 32~35 30~35 40~44
Max. WFT/Coat(µm) 500 500 500
DFT/Coat (µm) 175 175 220
Curing30 min/ 0.5mm WFT
at 50~75℃30 min / 0.5mm WFT
at 50~75℃30 min/0.5mm WFT
at 100~250℃
Curing at NTP (20~30℃)
3 hrs./0.5mm WFT 3 hrs./0.5mm WFT 3 hrs./0.5mm WFT
Surface after curing Hydrophobic Hydrophobic Hydrophobic
With “Aerogel-W”, We have developed 4types of aerogel coatings. In Korea, Several large companies already have been using this aero-coat-series. Especially, Aerocoat-300 is being applied to components of complex structures (engine part, pipe curved sections…etc) in which insulation is needed or which existing insulation blanket can not cover.
︾ ︾
Page 4
TEC Corporation
AEROCOAT-300
Benefits
AEROCOAT-300 is a Modified Organic/Inorganic Hybrid Silicone Based Silica Aerogel Coating for high temperature resistance in industrial use. Due to its various performances AEROCOAT-300 makes it an ab-solute choice for thermal insulation in industrial and general purposes.
※ Please refer to the TDS.
• Various heat resistance temperature range : From 80 ℃ up to 300 ℃• Thermal Conductivity : From 0.040W/mk~0.055W/mk• Target field of application : Steel Pipeline/Steel Structures• Applying procedure: Spray Gun, Airless Gun, Mortar Gun, Roller, Brush
Characteristics
1. Controllable viscosity2. Easy application (can be sprayed with spray gun or coat with roller or coating blades)3. Applicable in any shape and structure of steel4. Applicable in hot surface up to 200℃ by spray5. Curable at room temperature6. Hydrophobic surface7. Good adhesion to steel surface and no cracks on the surface of coat-ing8. Fire-proof performance with single top coat
Page 5
TEC Corporation
Blanket
Blanket
Water
Water Water Water
Aerogel Blanket
O₂
O₂
O₂
O₂Aerogel Blan-ket
Non Hydropobic
Corrosion
Firstly, the existing blanket has no Hydrophobic. so the blanket absorbs the moisture and eventually shrinks. Therefore it causes the inconvenience of hav-ing to replace the blanket after a certain period of time.
In case of aerogel blanket, although it has made up on the weakness of existing blanket, aerogel blanket experience the process of oxidation due to the oxygen created from the gap between the pipe and the surface of aerogel blanket during the construction process
Page 6
TEC Corporation
Silica Aerogel Coating
Silica Aerogel Coating
Hydrophobic
Anti-Corrosion
Easy Handling (just Spray Type)
High Temperature Resistance
However, our aerogel coating fully supplements the weakness of blan-ket.
• firstly, our aerogel coating is hydrophobic
• second, when coating the “aero-coat” to the pipe, we can completely avoid oxidation corrosion because there is no oxygen involved.
• thirdly, in order to attach a the blanket to the pipe, it must be mea-sured and constructed separately which requires a lot of technicians. but our product only requires one to mix the ingredients in the right proportions and just spray them.
Page 7
TEC Corporation
▣ Thermal Insulation Performance
▣ How to apply
Page 8
TEC Corporation
Conclusion
Solution - A
We also agree with you about Dry time issue. If you are concerned about Dry-time, we recommend you to see following solutions.
The insulating performance improves and the threat of crack decreases as the temperature inside of pipe increases. And of course, it will shorten the time gap of the coating time. If there’s a device inserting steam into the pipe to increase the temperature.
Please try to apply to pipe systems with Aero-coat-300.
If you want to develope new system to insulate for higher temperature (maximum 300 ℃) ap-plications such as steam. Also You can lower volume of pipe by installing aerogel coating sys-tem than now.
Our “Aerogel Coating”is an excellent insulator!!
Page 9
TEC Corporation
AEROGEL COATING APPLICATION SITES: Zhanjiang, China
Petroleum Refinery Company in China
Jobsite: Before Coating Surface temperature 300℃
Silica Aerogel Coating applied against 300 ℃ Final product
Before Coating Surface Temp: 280~300 ℃ After Coating Surface
Temp: 90~100℃ Thickness: 8~9mm
“Silica Aerogel Coating developed by TEC was applied at the jobsite of Petroleum Company in Zhanjiang, China”
Silica Aerogel Thermal Insulation Coat-ing
Page 10
TEC Corporation
AEROGEL COATING APPLICATION SITES: Denmark
Page 11
TEC Corporation
“ A breakthrough product in the history of silica aerogel”