advantages of impact drilling machines
TRANSCRIPT
Advantages of Impact Drilling Machines
Impact driver has taken the world by storm because of its advantages. These are used by those who work in wood or in other words, woodworkers. The difference between the traditional cordless drills and impact driver is that impact drivers have much higher rotational torque with fast paced rotationaltapping which helps to nudge the fastener along while keeping the screw tip in place without spinning out of the slots. Didn’t get it?
Imagine placing a wrench onto a bolt and a hammer tapping it to give it some extra power to turn the bolt. When the going gets tough,you start bumping the trigger and let go of the screw a bit.Human can give only one bump per second but the impact driver gives 50 bumps per second. Yes, a loud noisecomes from the machine but one can’t gain everything. Isn’t it?
Where does this impact driver fit in a woodworker’s shop?
A woodworker uses drills for a combination of drilling holes and drivingfasteners.Some are lightweight but some need a good amount of force.Usually they prefer building furniture with invisible fasteners but sometimes they find themselves driving in long sheet rock screws on many projects.
Impact drivers are best for building shop furniture, installing cabinets, building a deck and framing anything with dimensional lumber. Since They provide torque more than a normal cordless drill, they are very good for heavy duty jobs like driving in long lag bolts. One can even take out the lug nuts from the car wheel with these impact drivers.
Another advantage is that one doesn’t have to hold them tightly while providing the torque. Why? Because the momentum of the rotating striker inside is what supplies the rotation force, so that’s why even when you are driving something very tough, it is very easy to hold the tool and do your job.
It is great for the self drilling screws and self tapping. It never trips the head of the screw as long as you keep the angle right and viola! It sets the head right!
They are superior for most types of screws in hard wood, decking and sheathing. They are more compact than drills; therefore they can be used in tight spaces.
But avoid using materials like very soft or thin woods, plastic or drywall as these materials cannot tolerate over torquing. For such materials, drills are prefect.
Contact Us
Hindustan Shopping Pvt. Ltd.SCO 953, Office No. 13,
Sahibzada Ajit Singh Nagar,Sector-70, Mohali (Punjab)
Pin Code: 160071Phone No.: 0172-6060600
Email: [email protected]
