Sill pla te c onne c tion for

IC F Home s

EASY INSTALL!Screw threadedrod to bracket

Position for Concrete Pour

Secure Truss to Bracket1 2 3

Burmon Pty LtdABN 51 162 153 004

Factory Address: 10 Elliot Drive,Stapylton, Qld, 4207 Australia

Phone 1300 781 844 www.burmon.com.au

ADVANTAGESDesigned To Resist 98% Of All High Wind Events In The World

Fully Engineered, Tested and Certified

No More Hand Nailing

Hurricane Fixed Into Place On Top Of ICF Wall

Half the Cost of Other Connectors Whilst Delivering Extremely High Load Capacities

The Strongest ICF Tie Down System In The World

Screw Fixed Through Nail Plate For Faster, Stronger Connection

Significant Cost Savings to the Total House Build

A Revolutionary Roof Truss Tie Down System designed speci�cally for ICF Blocks.

Patent Pending

For fast, strong & cost effective tie down to ICF Walls

SPECIFICATION:Steel: Grade G300 for Bracket Thickness of Bracket 1.2 mm Thickness of Washer 10 mm Thickness of Over Strap 2 mm Galvanized Steel Coating

Screws: Burmon hex head, 35 mm x 12 gauge.

Product Code: BUCBICF - Timber

The limit state design wind upliftcapacity of the Hurricane Bracket encased in 20MPa concrete or betteris 24 k/N with 1 x M12 bolt hooked under rebar and fixed with designated number of screws into truss.

The limit state design capacity is 42 k/N when using 2 x M12 bolts and fixed with designated number of screws into truss.

Specified Burmon screws and bolts which are supplied must be used in conjunction with the Hurricane Bracket to achieve load ratings as per load tables.

The Burmon Hurricane Bracket international patent application number 2013209390 is certified in accordance with relevant Australian Standards and Building Codes.

The Burmon Hurricane Bracket has been tested at the University of South Queensland, Toowoomba by the Structural Testing Services Division.

Video footage of testing results can be viewed at www.burmon.com.au -Laboratory testing

LOAD DATA:

5 x 35mm,12 gauge screwsinto truss each side

1 x M12 Bolt in 2 coursescogged at end

9 x 35mm,12 gauge screwsinto truss each side

2 x M12 Bolt in 2 coursescogged at end

TIE DOWN FOR TIMBER TRUSSES

5400pounds

Fastener Schedule DF/SPAllowable Loads

9450pounds

Fastener Schedule DF/SPAllowable Loads

This engineered building product complies with local buildingand International codes.

Threaded Washer

Over strap

Nut

Bolt

Bracket

1.

2.

3.

4.

5.

6.