2000 V 5000 V

10000 V 20000 V

North American 120 V/60Hz

ADVANCED SYSTEM FOR CLEANING OF GREASE AND ODOR IN VENTILATION DUCTS

AREAS OF USE• Restaurants• Commercial kitchens• Apartments buildings• Industry• Agriculture

GREASE AND ODOR REDUCTION

OWNER BENEFITS REDUCED MAINTENANCE OVERHEADAirMaid® is essentially maintenance-free, other than an occasional cleaning with a soft towel.

REDUCED DUCT CLEANINGWhen properly installed, owners have seen duct cleaning expenses reduced as much as 70%.

REDUCED RISK OF FIREWithout grease laden duct runs, owners and fire officials will sleep better, knowing their risk of fire has been drastically reduced.

REDUCED BACTERIAAirMaid® effectively eliminates all types of bacteria that collect in exhaust ducts thereby minimizing risk such bacteria could find their way back into the kitchen premises.

REMARKABLE PERFORMANCEImagine grease ducts so clean that even kitchen heat is recovered using plate and frame heat exchangers throughout Northern Europe!

CGC ”CORONA GLASS CELL” The unique AirMaid® Corona Glass Cell produces ozone by electrical discharge. Since AirMaid® is installed outside the dirty airstream the CGC has a long expected lifetime and requires very little maintenance. Our CGC technology has been on the market since 1996.

THREE YEAR WARRANTYAll AirMaid® generators are delivered with a 3-year limited warranty from the date of original installation.

Without AirMaid®

With AirMaid®

GREASE REDUCTIONAirMaid® significantly reduces grease buildup in exhaust ducts. This is accomplished by simple oxidation, the chemical reaction of ozone with grease and odor particles, effectively reducing them to water and dry minerals which are then expelled by the exhaust airstream.

ODOR REDUCTIONAll types of food preparation create odors and chemical vapors, and the particles that comprise these are not caught by conventional filters. With AirMaid® in place the residual odor that exits the exhaust duct can be greatly reduced under the condition that the dwell time for the ozone/greasy airflow mix within the duct is at least 2 seconds before exiting the premises.

COST REDUCTIONWith AirMaid® in place you will enjoy significantly lower operational expenses through reduced maintenance, duct cleaning and energy consumption for your pollution control.

Inner ceilingInner ceiling

INSTALLATION

Fresh input air

Greasy hood air

Treated air

FOUR MODELS MAX EXHAUST FLOW

AirMaid® 2000 V 600 cfm AirMaid® 5000 V 1500 cfm AirMaid® 10000 V 3000 cfm AirMaid® 20000 V 6000 cfm

AirMaid is easy to install both into new projects and as a retrofit into existing kitchens.

The generator, alarm panel and connections to inlet air and extraction ducts must always be installed by qualified personnel, in compliance with all manufacturer instructions as well as local, state and national building, electric and fire safety codes.

TECHNICAL SPECIFICATIONSAirMaid® Max Exhaust Flow Ozone capacity (mg/h) Power Voltage Weight ΔP @ 75 cfm **

2000 V 600 cfm 2000 100 W 120V/60 Hz 20 lbs 0.54 inH2O

5000 V 1500 cfm 5000 100 W 120V/60 Hz 20 lbs 0.54 inH2O

10000 V 3000 cfm 10000 200 W 120V/60 Hz 22 lbs 0.80 inH2O

20000 V 6000 cfm 20000 400 W 120V/60 Hz 40 lbs 0.62 inH2O

** Per discharge pipeMaterial: AISI 304 Stainless SteelOperating temperature: -13°F to 104°FDimensions W x L x H: 12 x 16 x 10 in. (Model 2000 V/5000 V/10000 V)Dimensions W x L x H: 25 x 16 x 10 in. (Model 20000 V)

SERVICE & MAINTENANCEThe ozone cells inside the ozone generator must be checked and if necessary cleaned at least once a year. Clean the glass electrodes carefully with a soft towel together with an alcohol-based cleaning spirit. Never use any tool or scraper to clean the electrodes. If a separate air filter is used for the inlet air, make sure that this filter is changed at least one time per year. The exhaust ducts must be swept clean of grease and soot at the time of installation. This is required to achieve the desired result of the ozone cleaning.

Simple to clean.

Interzon AB Phone: +46 8 544 444 30 Propellervägen 4A Fax: +46 8 544 444 39SE-183 62 Täby, Sweden Email: info@interzon.com Internet: www.interzon.com

Reproduction, adaption or translation without prior written permission is prohibited, except as allowed under copyright laws – © 2015 Copyright Interzon AB – ID#33467 – Rev6, 3/2015

Code-compliant installation sketches are available upon request.

Example diagrams only. Consult Installation and Service Guide for complete instructions before proceeding.