advanced product databook features - pdf.dzsc.compdf.dzsc.com/88889/28060.pdf · advanced product...

Copyright Cirrus Logic, Inc. 1998(All Rights Reserved)

CRD4235-6Advanced Product Databook

CrystalClear™16-bit Low-Cost Audio

Adapter Reference Design

FEATURES MPC3 compliant (with enhancements), Windows

Sound System™, DOS Games and AdLib™ compatible

Low Cost Two-Sided Board that Maintains Quality

Crystal Single-Chip CS9236 Wavetable Music Synthesizer

Design accepts the CS4235 , or CS4236B, CS4237B, CS4238B family of devices with simple Bill-of-Material changes

Jumper selectable output amplifier option. Switch between a high quality headphone capa-ble amplifier, or a speaker driver.

MODEM audio connection for Audio Telephony Applications (Requires a separate Modem Card)

Fully Plug-and-Play Compliant

DESCRIPTIONThe CD-quality CRD4235-6 reference design is fullyMPC3 compliant, Ad Lib, DOS Games and WindowsSound System compatible. The design is a half sizetwo-sided ISA-bus PC adapter board, based on theCS4235 Multimedia Audio Codec. The CS9236 is ahigh quality low-cost way to add Wavetable music syn-thesis to the sound card and can be soldered downduring the production process, or added later if a PLCCsocket is installed.

The CRD4235-6 reference design is backed by a cus-tomer ready manufacturing kit. Included in the kit are fullschematic and library design files, PWB job files, andPWB artwork files. The OEM has the option of quicklymodifying the existing design for their specific require-ments or implementing the design as is. Documentationsource files are available to allow the OEM to quicklycreate an accurate end user manual.

ORDERING INFOCMK4235-6

DS252RD6C2 MAY ‘98

查询cs4235-6供应商

http://www.dzsc.com/stock_cs4/cs4235-6.html

2 DS252RD6C2

CRD4235-616-bit Low-Cost Audio Adapter Reference Design

GENERAL INFORMATION

The CRD4235-6 is a reference design of a produc-tion-grade PC-AT adapter card using the Crystal-Clear CS4235 Multimedia Audio Codec. This cardis designed to provide the highest possible func-tionality, along with superlative audio performanceat a low manufacturing cost. The CRD4235-6 isFCC class B and CISPR certified. All logical sub-systems are fully Plug and Play compliant andready for all Microsoft® Operating Systems. Thedesign provides a full set of features required fortoday’s multimedia applications.

The CRD4235-6 reference design includes manyfeatures that make it possible to manufacture oneboard and actively compete in different markets.All of the following features can be eliminatedfrom the design during the manufacturing processif a cost reduction is desired.

- The microphone input feature allows the use of both internal and external microphone sources.

- Jumper selectable ouput amplifier. The CRD4235-6 can be manufactured with both amplifiers, or the OEM has the option to only populate the desired amplifier at the time of manufacture, and hard-wire the jumper for a fixed configuration.

- The CD-ROM audio input has been designed to provide two popular header sizes, since both connectors cannot be used simultaneously, the OEM can elect to only populate the desired CD-ROM Audio jack.

- The MODEM audio circuitry has been designed to interface to a audio capable modem board, and can be completely removed from the CRD4235-6 if this feature is not required.

- A dual joystick and MIDI interface is available with an industry standard 15-pin D-sub connector.

- Wavetable audio is available with the on-board CS9236 single chip Wavetable IC.

Software drivers are available for the CS4235 thatsupport all major operating systems. The Windows95™ drivers are fully Plug and Play compatible,and like the Windows NT™ drivers, will utilize the

embedded multimedia applets provided by Mi-crosoft. Cirrus Logic provides the essential multi-media applets and drivers required for theWindows® 3.1 and OS/2® operating systems on thedrivers diskette. DOS utilities are also availablewhich allow the computer to play a CD-ROM andcontrol the sound volume.

All aspects of the design have been optimized toensure top performance at the lowest cost. Carewas taken with signal routing and componentplacement to minimize sources which can degradeperformance. Cirrus’ analog design know-how hasresulted in a board which preserves the exceptionalanalog performance of the CS4235 audio Codec.

BOARD AUDIO INTERCONNECTIONS

Three external stereo jacks (listed top to bottom) al-low connection to a mono Microphone input, a ste-reo Line input, and a stereo Line/Headphone orspeaker output. Headers for internal microphone,two common styles of CD-ROM audio, and a MO-DEM audio interface are also supported.

The first jack, designated MIC IN, is a single-endedmicrophone (as opposed to differential) input, sup-porting most common types of dynamic or phan-tom powered microphones. The microphone inputcircuitry provides no signal amplification, but a20 dB gain block inside the CS4235 can be soft-ware enabled (the "Boost" button in the Windowsinput applet) if signal levels are too low. In manycases, the additional "Boost" will be required withthe CRD4235-6 implementation in order to achievea desirable audio level.

The second input jack, designated LINE IN, is forline inputs and is connected to the AUX1 inputs ofthe CS4235. Each channel has an input impedanceof approximately 15 kΩ. The maximum full scaleinput that the LINE IN function can tolerate is2 VRMS.

The third jack is LINE OUT/SPEAKER OUT. Theline output from the CS4235 is either amplified by

DS252RD6C2 3


a low-noise, low-distortion amplifier, or by aspeaker amplifier. The unused amplifier need notbe populated at manufacturing time in order to sim-plify this output function.

The CS4235 CD-ROM audio input headers areconnected in parallel, which means that only onecan be active at a time. The OEM will need to makethis clear to end users, or delete the unused connec-tor entirely.

The MODEM header provides an audio interfacebetween the sound card and a modem. Mono outand Mic out signals transfer audio from the soundcard to the modem, and a mono in signal transfersaudio from the modem to the sound card.

CIRCUIT DESCRIPTIONS

The functional block diagram is shown in Figure 1.

The CS4235 (as shown in Figure 2) is the heart ofthe CRD4235-6 reference design. The CS4235 is aPlug-and-Play aware device that controls all as-pects of the sound card. See CS4235 Datasheet forcomplete information on this device.

The interconnections for ISA bus signals are de-tailed in Figure 3.

The DB-15 connector shown in Figure 4, providesan interface to an external joystick and MIDI I/O.The joystick interface supports two joysticks: twopair of X/Y coordinates and four buttons. The inter-nal resistors and 1000 pF caps provide the correctdebounce period for the joystick buttons. The tim-ing for the joystick position is determined by thejoystick potentiometer, the series 2.2 kΩ resistorand the 5600 pF capacitor. Deviation from the2.2 kΩ and 5600 pF component values will resultin improper joystick positioning. The MIDI TXDand MIDI RXD signals are TTL level signals andnot compatible with direct MIDI cabling. An exter-nal "break-out" box attached to the 15-pin D-subconnector interfaces the TTL MIDI signals to anisolated MIDI connector.

On-board music synthesis is furnished by an FM syn-thesizer internal to the CS4235. For enhanced synthe-sis support, the CS9236 single-chip WavetableSynthesis IC can be populated. The CS9236 pro-vides a digital signal to the CS4235 via a serial in-terface, which is internally converted to an analogsignal. The CS9236 interface is enabled by settingthe WTEN bit in the EEPROM.

The Line and CD analog inputs shown in Figure 5are both routed through 6 dB attenuators, and DCblocking capacitors. This circuitry provides inputprotection for the CS4235, and isolation from theanalog input DC bias. 100 pF capacitors can bepopulated on the line input to provide better FCCfiltering.

The output (Figure 6) of the CS4235 mixer is onlycapable of driving impedances greater than 10 kΩwith a maximum voltage of 1 VRMS . Some form ofoutput amplifier is usually required to drive pow-ered speakers or headphones. The CRD4235-6 hasthe several output amplifier options. A low-costLM1458, or a high-quality NE5532 amplifier canbe populated at location U7. Both amplifier optionsare not capable of driving non-amplified (4 Ω -16 Ω) speakers. The other output option is dis-cussed in detail under Figure 8. The header whichselects the output amplifier is J8 (Left) and J9(Right).

An alternate output circuit configuration is basedaround U13. The LM1458N (Figure 6) providesleft and right mixing to supply a mono-out signal toan external modem. This option would normallybe used in addition to one or more of the abovementioned options, instead of as a replacement.

The microphone circuit (Figure 7) was designed tobe low cost, with a low component count. No am-plification of the incoming signal is provided. The+5 VA supply is reduced to 2.5 V with a resistivevoltage divider. This reference is used to provide alow-noise source for phantom powered micro-phones. Phantom power is permanently applied

4 DS252RD6C2


through a 2.2 kΩ resistor to either the right or leftchannels of the stereo jack. This provides for mi-crophones that require bias on either the tip or ringof the microphone’s plug. The choice of right or leftphantom power is a hardware population option.Placing phantom power on the ring connection ofthe jack is the typical configuration. An internalmicrophone can be connected to a header, in placeof the external microphone jack input.

The U13 LM1458N (Figure 7) circuitry has beenprovided to supply an amplified microphone signalto an external modem. The U13 device can be non-populated if the modem function is not required.

The TDA1517 can provide amplified audio powerto a set of non-powered speakers (Figure 8). It isalso capable of driving headphones, and poweredspeakers. This device can be used as the only out-put amplifier on the CRD4235-6, but the overallaudio performance is not as good as that providedby the LM1458N.

An "L" series 5 V regulator (Figure 9) provides aclean low noise supply for the analog subsectionsof the CRD4235-6. The TO-92 package is adequateto provide the current and power dissipation re-quired. If cost is the deciding factor, the LM78L05can be non-populated and replaced with R44, witha loss of audio quality. The 3.3 VD supply is re-

quired for the CS9236 and can be non-populatedwhen the CS9236 is not used. Two different meth-ods are provided for generating the 3.3V supplyvoltage. A 3.3 V regulator is available by populat-ing the LT1121CZ-3.3 (U10), or by using the low-er-cost configuration of an MPS2222 (Q1),1N5228 (D1) and a 100 Ω resistor (R45). The+12 V and -12 V power are filtered through a sim-ple LC filter.

An external serial EEPROM (also shown inFigure 9) contains the Plug-and-Play configurationtable. The CRD4235-6 includes a footprint for botha DIP and a SOIC EEPROM. Only one of theseshould be populated. After a power-on-reset, thedata within the EEPROM is serially transferred tothe CS4235. The XA0 pin serves as the serial clockwhile the XD0 pin functions as the bi-directionalserial data-path. The EEPROM’s data pin and theCS4235 XD0 pin are open collectors; a pull-up re-sistor is mandatory. If a Microsoft WHQL logo isnot required, then the EEPROM can be removedand the CRD4235-6 will function based on internalresources.

Reference design:

— silk screen. (Figure 10)

— (component) top side. (Figure 11)

— (solder) bottom side. (Figure 12)

Microsoft and Windows are registered trademarksWindows NT, Windows 95 and Windows Sound System are trademarks of Microsoft. OS/2 is a registered trademark of International Business Machines Corporation.Ad Lib is a trademark of Adlib Corporation.CrystalClear is a trademark of Cirrus Logic, Inc.

DS252RD6C2 5


Fig

ure

1. C

S423

5-1E

Sch

emat

ic B

lock

Dia

gram

6 DS252RD6C2


CS

423

5o

nly

CS

4235

on

ly

CS

423X

Bo

nly

CS

423X

Bon

ly

CS

423

XB

onl

y

notp

opul

ated

Fig

ure

2. C

S423

5

DS252RD6C2 7


Fig

ure

3. I

SA B

us

8 DS252RD6C2


notp

opul

ated

Fig

ure

4. G

ame

Por

t / W

avet

able

DS252RD6C2 9


Fig

ure

5. C

D A

nalo

g an

d L

ine

Inpu

ts

10 DS252RD6C2


Fig

ure

6. L

ine

/ Hea

dpho

ne O

utpu

t

DS252RD6C2 11


Fig

ure

7. M

icro

phon

e In

put

12 DS252RD6C2


Fig

ure

8. S

peak

er A

mpl

ifie

r

DS252RD6C2 13


08 08

notp

opul

ated

NO

TE

:The

Ana

log

(AG

ND

)an

dth

eD

igita

l(G

ND

)G

roun

dP

lane

sM

US

Tbe

conn

ecte

dto

geth

er

Fig

ure

9. A

nalo

g P

ower

and

EE

PR

OM

14 DS252RD6C2


Fig

ure

10.

Silk

Scr

een

DS252RD6C2 15


Fig

ure

11.

Top

Sid

e

16 DS252RD6C2


Fig

ure

12.

Bot

tom

Sid

e

DS252RD6C2 17


Bill

Of

Mat

eria

ls

O

cto

ber

13,

1997

11:5

2:59

Item

Qu

an.

Ref

eren

ceP

art

PN

Man

ufa

ctu

rer

Des

crip

tio

n1

12C

11,C

12,C

13,C

14,C

15,C

41,C

53,

C55

,C56

,C78

,C79

,C80

10uF

EC

E-A

1CN

100S

PA

NA

SO

NIC

CA

P,E

LEC

,10U

F,T

H,C

AS

E C

,20%

,16V

218

C2,

C3,

C6,

C10

,C20

,C21

,C22

,C27

,C

33,C

34,C

36,C

38,C

40,C

43,

C58

,C59

,C60

,C68

.1uF

C08

05C

104K

5RA

CK

EM

ET

CA

P,.1

UF,

SO

,080

5,10

%,5

0V,X

7R

32

C5,

C9

100u

F E

LEC

EC

E-A

1CK

A10

1P

AN

AS

ON

ICC

AP,

ELE

C,1

00uF

,TH

,CA

SE

C,2

0%,1

6V

42

C24

,C72

1.0u

FG

RM

40-6

Y5V

105Z

016A

DM

UR

ATA

CA

P,1.

0UF,

SO

,080

5,+

80/-

20%

,16V

,Y5V

52

C17

,C18

22pF

C08

05C

220J

5GA

CK

EM

ET

CA

P,22

pF,S

O,0

805,

5%,5

0V,C

OG

67

C31

,C32

,C44

,C45

,C46

,C47

,C73

1000

pFC

0805

C10

2J5G

AC

KE

ME

TC

AP,

1000

pF,S

O,0

805,

5%,5

0V,C

OG

74

C48

,C49

,C50

,C51

5600

pFC

0805

C56

2K5R

AC

KE

ME

TC

AP,

5600

pF,S

O,0

805,

10%

,50V

,X7R

81

C71

0.01

uFO

8052

R10

3K9B

B2

PH

ILIP

SC

AP,

0.01

uF,S

O,0

805,

10%

,50V

,X7R

92

C74

,C75

470u

F E

LEC

EC

E-A

1CG

E47

1P

AN

AS

ON

ICC

AP,

ELE

C,4

70U

F,S

O,C

AS

E E

,20%

,16V

102

C76

,C77

0.33

uFG

RM

40-6

X7R

334K

016A

LM

UR

ATA

CA

P,0.

33uF

,080

5,+

/-10

%,1

6V,X

7R12

1J1

4X1H

DR

TS

W-1

04-0

7-T-

SS

AM

TE

CH

DR

,4X

1,0.

025”

PIN

,0.1

”CT

R13

3J2

,J7,

J11

PH

ON

O-1

/8A

J-03

56A

-5P

A/D

ELE

CT

RO

NIC

SC

ON

N,1

/8”

SW

ITC

HE

D S

TE

RE

O P

HO

NE

JA

CK

141

J34X

1/80

HD

RB

4B-P

H-K

JSF

HD

R,4

X1/

80,0

.025

”PIN

,0.0

8”C

TR

151

J6D

B15

7478

45-3

AM

PC

ON

N,1

5D S

HE

LL,F

EM

ALE

,RT

AN

GLE

P

C M

OU

NT

162

J9,J

83X

1HD

RT

SW

-103

-07-

T-S

SA

MT

EC

HD

R,3

X1,

0.02

5”P

IN,0

.1”C

TR

176

L1,L

2,L3

,L4,

L5,L

6F

ER

RIT

EE

XC

-ELS

A35

PA

NA

SO

NIC

IND

,FB

EA

D,T

H,A

XIA

L19

2R

2,R

463.

3K9C

0805

2A33

01J

PH

ILIP

SR

ES

,3.3

K,S

O,0

805,

5%,1

/10,

ME

TAL

FIL

M20

13R

4,R

5,R

32,R

33,R

35,R

36,R

40,R

41,

R47

,R48

,R49

,R50

,R53

6.8K

9C08

052A

6801

JP

HIL

IPS

RE

S,6

.8K

,SO

,080

5,5%

,1/1

0W

213

R13

,R51

,R52

4.7K

9C08

052A

4701

JP

HIL

IPS

RE

S,4

.7K

,SO

,080

5,5%

,1/1

0W

234

R25

,R26

,R27

,R28

2.2K

9C08

052A

2201

JP

HIL

IPS

RE

S,2

.2K

,SO

,080

5,5%

,1/1

024

2R

29,R

3168

K9C

0805

2A68

02J

PH

ILIP

SR

ES

,68K

,SO

,080

5,5%

,1/1

0W,M

ETA

L F

ILM

254

R30

,R34

,R54

,R55

33K

9C08

052A

3302

JP

HIL

IPS

RE

S,3

3K,S

O,0

805,

5%,1

/10,

ME

TAL

FIL

M26

2R

39,R

3810

9C08

052A

10R

0JP

HIL

IPS

RE

S,1

0,S

O,0

805,

5%,1

/10W

271

R43

09C

0805

2A0R

00J

PH

ILIP

SR

ES

,0,S

O,0

805

282

R56

,R57

15K

9C08

052A

1502

JP

HIL

IPS

RE

S,1

5K,S

O,0

805,

5%,1

/10W

292

R66

,R67

100K

9C08

052A

1003

JP

HIL

IPS

RE

S,1

00K

,SO

,080

5,5%

,1/1

0W,M

ETA

L F

ILM

301

U1

LM78

L05

uA78

L05C

LPT

IIC

,78L

05,T

H,T

O-2

26A

A,+

5V

VO

LTA

GE

R

EG

ULA

TO

R

311

U3

X24

C08

SO

AT

24C

08N

-10S

CA

TM

EL

IC,2

4C08

,SO

,SO

IC8,

EE

PR

OM

18 DS252RD6C2


331

U7

LM14

58N

LM14

58N

NA

TIO

NA

LIC

,145

8,T

H,D

IP,D

UA

L O

P A

MP

341

U9

CS

4235

-KQ

CS

4235

-KQ

-Pre

limC

RY

STA

LIC

,SO

,TQ

FP

100,

MU

LTIM

ED

IA C

OD

EC

351

U12

TD

A15

17P

TD

A15

17P

PH

ILIP

SS

OT

398-

1,D

IP-1

836

1Y

116

.934

4 M

Hz

HC

49S

-16.

9344

FO

XC

RY

STA

L

Bill

Of

Mat

eria

ls

O

cto

ber

13,

1997

11:5

2:59

Item

Qu

an.

Ref

eren

ceP

art

PN

Man

ufa

ctu

rer

Des

crip

tio

n

• Notes •

advanced product databook features - pdf.dzsc.compdf.dzsc.com/88889/28060.pdf · advanced product...

Documents