advanced internal combustion engines
DESCRIPTION
Engine Electronics, ProgrammingTRANSCRIPT
COMPUTERISED ENGINE COMPUTERISED ENGINE CONTROLSCONTROLS
FUNCTIONAL DECOMPOSITIONFUNCTIONAL DECOMPOSITION
ENGINE ENGINE COMMUNICATIONCOMMUNICATION
TSM-FSM REGIONS OF TSM-FSM REGIONS OF OPERATIONSOPERATIONS
MULTI POINT INJECTION APPLIED TO MULTI POINT INJECTION APPLIED TO EMISSION REGULATIONEMISSION REGULATION
DIRECT FUEL INJECTION DIRECT FUEL INJECTION SYSYTEMSYSYTEM
NEXT GENERATION DIRECT GASOLINE INJECTION NEXT GENERATION DIRECT GASOLINE INJECTION FOR ACHIEVING FUEL ECONOMY AND LOW EHAUST FOR ACHIEVING FUEL ECONOMY AND LOW EHAUST
EMISSIONSEMISSIONS
BROADBANDBROADBAND RAMAN SPECTROSCOPYRAMAN SPECTROSCOPY
RESPONSE OF ENGINE PARAMETERS TO RAPID RESPONSE OF ENGINE PARAMETERS TO RAPID CHANGE OF THE THROTTLE POSITIONCHANGE OF THE THROTTLE POSITION
INTAKE-COMPRESSION-COMBUSTION & INTAKE-COMPRESSION-COMBUSTION & EXHAUST IN DIRECT FUEL INJECTED EXHAUST IN DIRECT FUEL INJECTED
GASOLINE ENGINEGASOLINE ENGINEStoke 1)Stoke 1) The inlet valves are opened by way of the camshaft to allow The inlet valves are opened by way of the camshaft to allow the air to enter the engine. At the same time, fuel is injected into the air to enter the engine. At the same time, fuel is injected into the engine by way of the fuel injector. Note however that the fuel the engine by way of the fuel injector. Note however that the fuel and air is mixed in the inlet manifold and not in the bores and air is mixed in the inlet manifold and not in the bores themselves. In the more simple injection systems, this process themselves. In the more simple injection systems, this process happens simultaneously, whilst in the more advanced systems, this happens simultaneously, whilst in the more advanced systems, this happens sequentiallyhappens sequentially
Stroke 2)Stroke 2) During this stroke, the inlet valves are closed, the air and During this stroke, the inlet valves are closed, the air and fuel mixture is further atomized and then compressed by the fuel mixture is further atomized and then compressed by the upward movement of the piston in the bore.upward movement of the piston in the bore.Stroke 3)Stroke 3) At the top of this stroke (where the piston is in what is At the top of this stroke (where the piston is in what is known as the ‘top dead centre position’) the the mixture is ignited known as the ‘top dead centre position’) the the mixture is ignited by the spark plug, forcing the piston back down in the bore. Or side by the spark plug, forcing the piston back down in the bore. Or side to side in the case of a boxer engine. The piston then pushes the to side in the case of a boxer engine. The piston then pushes the connecting rod to turn the crankshaft.connecting rod to turn the crankshaft.
Stroke 4)Stroke 4) On the final stroke, the exhaust valves are opened by On the final stroke, the exhaust valves are opened by another camshaft, the pistons comes back up the bore again, another camshaft, the pistons comes back up the bore again, pushing the burnt gasses out through the ports. The time during pushing the burnt gasses out through the ports. The time during which the inlet and exhaust valves are both open is known as the which the inlet and exhaust valves are both open is known as the valve overlap.valve overlap.
DIRECT FUEL INJECTED ENGINE DIRECT FUEL INJECTED ENGINE CONFIGURATIONCONFIGURATION
INTAKE-COMPRESSION-COMBUSTION & INTAKE-COMPRESSION-COMBUSTION & EXHAUST IN DIRECT FUEL INJECTED EXHAUST IN DIRECT FUEL INJECTED
GASOLINE ENGINEGASOLINE ENGINE
CONTINUOUS MONITORING OF INTERNAL-COMBUSTION ENGINES USING LAB VIEW
PERFORMANCE DIRECT FUEL INJECTED AND PERFORMANCE DIRECT FUEL INJECTED AND CARBURETTED GASOLINE ENGINESCARBURETTED GASOLINE ENGINES
DIRECT FUEL INJECTED ENGINE ASSEMBLYDIRECT FUEL INJECTED ENGINE ASSEMBLY
WIDE RANGE OF AIR-FUEL RATIO WIDE RANGE OF AIR-FUEL RATIO MEASUREMENTMEASUREMENT