advanced fixings buffalo catalogue 2011
DESCRIPTION
Advanced Fixings Buffalo Catalogue 2011TRANSCRIPT
Chemical Anchoring Range
BUFFALO™
magazine.indd 1 19/09/2011 15:09:53
Contents
5-6VYLSF345 Vinylester 10:1 (ETA Approved)
Chemical Anchor ing Resin Formulat ions
Company Profile
Overview
3-4PUR400 Pure Epoxy 1:1 (Tested by Imperial College)
7-8EPSF410 & 300 (ITB Approved)
9-10XPSF410 & 300 (ITB & Socotec Approved)
XP410 & 300 (ITB Approved) 10-12
13-14Manual Extrusion Tools
Spare Mixer Nozzles
Anchor ing Accessor ies
Page
13-14
13-14Mixer Nozzle Extensions
13-14Asphalt Fixings
13-14
Hollow Wall Fixing Accessories
Hole Cleaning Accessories
13-14
Page 2
1-2
BUFFA SealCARTRIDGE INNOVATION
• A new easy open and extrusion system for anchoring cartridges.
• Unique foil bag inner provides an easier extrusion (less force).
• BuffaSeal cap allows re-use, open and close.
• Fuller resin extrusion - more resin where you need it.
• Less packaging used than a traditional cartridge (410ml).
• Available in 300ml and 410ml in the resin range.
Advantages..
magazine.indd 3 19/09/2011 15:10:58
Welcome to the ‘Buffalo’ range of chemical fi xing technology. A range extensively researched and produced for use in the construction industry and allied markets. We are committed to supplying consistent and sustainable quality products that have been subjected to a rigorous and extensive testing program.
Our comprehensive range has been specifi cally designed to provide for all applications and sectors of construction. The clear colour coded selection criteria should ensure you can simply select the fi xing resin that is most suitable for your application from pure epoxy through to polyester.
We are able to provide a complete solution with full technical data, support, information, product testing and specifi c formulations if required for engineers, specifi ers and users of the product. The customer web resource area can be found at www.strongfast-uk.com where you can access technical and health and safety data.
The Buffalo range is supported by the many approvals required by the construction industry to meet international standards and give our customers 100% peace of mind in product performance & regulatory compliance.Please contact your local Buffalo distributor for further information.
CHEMICAL FIXING TECHNOLOGY..
BUFFALO™
Page 1
STRONGSTRONGERSTRONGEST
For a Secure Hold
magazine.indd 2 19/09/2011 15:10:55
ADVANCE FIXINGS
Welcome to the ‘Buffalo’ range of chemical fi xing technology. A range extensively researched and produced for use in the construction industry and allied markets. We are committed to supplying consistent and sustainable quality products that have been subjected to a rigorous and extensive testing program.
Our comprehensive range has been specifi cally designed to provide for all applications and sectors of construction. The clear colour coded selection criteria should ensure you can simply select the fi xing resin that is most suitable for your application from pure epoxy through to polyester.
We are able to provide a complete solution with full technical data, support, information, product testing and specifi c formulations if required for engineers, specifi ers and users of the product. The customer web resource area can be found at www.strongfast-uk.com where you can access technical and health and safety data.
The Buffalo range is supported by the many approvals required by the construction industry to meet international standards and give our customers 100% peace of mind in product performance & regulatory compliance.Please contact your local Buffalo distributor for further information.
CHEMICAL FIXING TECHNOLOGY..
BUFFALO™
Page 1
STRONGSTRONGERSTRONGEST
For a Secure Hold
Contents
5-6VYLSF345 Vinylester 10:1 (ETA Approved)
Chemical Anchor ing Resin Formulat ions
Company Profile
Overview
3-4PUR400 Pure Epoxy 1:1 (Tested by Imperial College)
7-8EPSF410 & 300 (ITB Approved)
9-10XPSF410 & 300 (ITB & Socotec Approved)
XP410 & 300 (ITB Approved) 10-12
13-14Manual Extrusion Tools
Spare Mixer Nozzles
Anchor ing Accessor ies
Page
13-14
13-14Mixer Nozzle Extensions
13-14Asphalt Fixings
13-14
Hollow Wall Fixing Accessories
Hole Cleaning Accessories
13-14
Page 2
1-2
BUFFA SealCARTRIDGE INNOVATION
• A new easy open and extrusion system for anchoring cartridges.
• Unique foil bag inner provides an easier extrusion (less force).
• BuffaSeal cap allows re-use, open and close.
• Fuller resin extrusion - more resin where you need it.
• Less packaging used than a traditional cartridge (410ml).
• Available in 300ml and 410ml in the resin range.
Advantages..
magazine.indd 3 19/09/2011 15:10:58
Welcome to the ‘Buffalo’ range of chemical fi xing technology. A range extensively researched and produced for use in the construction industry and allied markets. We are committed to supplying consistent and sustainable quality products that have been subjected to a rigorous and extensive testing program.
Our comprehensive range has been specifi cally designed to provide for all applications and sectors of construction. The clear colour coded selection criteria should ensure you can simply select the fi xing resin that is most suitable for your application from pure epoxy through to polyester.
We are able to provide a complete solution with full technical data, support, information, product testing and specifi c formulations if required for engineers, specifi ers and users of the product. The customer web resource area can be found at www.strongfast-uk.com where you can access technical and health and safety data.
The Buffalo range is supported by the many approvals required by the construction industry to meet international standards and give our customers 100% peace of mind in product performance & regulatory compliance.Please contact your local Buffalo distributor for further information.
CHEMICAL FIXING TECHNOLOGY..
BUFFALO™
Page 1
STRONGSTRONGERSTRONGEST
For a Secure Hold
magazine.indd 2 19/09/2011 15:10:55
Contents
5-6VYLSF345 Vinylester 10:1 (ETA Approved)
Chemical Anchor ing Resin Formulat ions
Company Profile
Overview
3-4PUR400 Pure Epoxy 1:1 (Tested by Imperial College)
7-8EPSF410 & 300 (ITB Approved)
9-10XPSF410 & 300 (ITB & Socotec Approved)
XP410 & 300 (ITB Approved) 10-12
13-14Manual Extrusion Tools
Spare Mixer Nozzles
Anchor ing Accessor ies
Page
13-14
13-14Mixer Nozzle Extensions
13-14Asphalt Fixings
13-14
Hollow Wall Fixing Accessories
Hole Cleaning Accessories
13-14
Page 2
1-2
BUFFA SealCARTRIDGE INNOVATION
• A new easy open and extrusion system for anchoring cartridges.
• Unique foil bag inner provides an easier extrusion (less force).
• BuffaSeal cap allows re-use, open and close.
• Fuller resin extrusion - more resin where you need it.
• Less packaging used than a traditional cartridge (410ml).
• Available in 300ml and 410ml in the resin range.
Advantages..
ADVANCE FIXINGS
Welcome to the ‘Buffalo’ range of chemical fi xing technology. A range extensively researched and produced for use in the construction industry and allied markets. We are committed to supplying consistent and sustainable quality products that have been subjected to a rigorous and extensive testing program.
Our comprehensive range has been specifi cally designed to provide for all applications and sectors of construction. The clear colour coded selection criteria should ensure you can simply select the fi xing resin that is most suitable for your application from pure epoxy through to polyester.
We are able to provide a complete solution with full technical data, support, information, product testing and specifi c formulations if required for engineers, specifi ers and users of the product. The customer web resource area can be found at www.strongfast-uk.com where you can access technical and health and safety data.
The Buffalo range is supported by the many approvals required by the construction industry to meet international standards and give our customers 100% peace of mind in product performance & regulatory compliance.Please contact your local Buffalo distributor for further information.
CHEMICAL FIXING TECHNOLOGY..
BUFFALO™
Page 1
STRONGSTRONGERSTRONGEST
For a Secure Hold
Product Description
Key Features
Typical Gel and Curing Time*BASE MATERIAL TEMPERATURE (°C) 35 25 15 5* 0
TYPICAL GEL TIME (mins) 20 40 60 180 -
MIN. LOAD TIME (mins) 180 240 300 960 -
PUR400 is a pure epoxy fi xing resin designed for high load bearing applications in concrete. This product is solvent free with virutally no odour, to allow safe use indoors or in confi ned spaces. Suitable particularly for rebars and large diameter and deep threaded stud fi xings due to its slow gelling action, and zero shrinkage.
• Used in Wet Holes or Underwater.
• Ideal for Deep Embedment.
• Longer Working Times, for use with Rebar.
• Highest Durability.
• No Shrinkage.
BS6920 approved For use withPotable drinking water.
concrete stone marble rebar wet diamonddrilled
Page 4
Approvals
INSTYTUT TECHNIKI BUDOWLANEJ
Aprobacie Technicznej ITB
Main Application Types
• Large Diameter &
Deep Embedment
Fixings
• Rebar Fixing
• Diamond Drilled
Holes
• High Loading
• Chemical Exposure
• Dynamic Loads
• Wet and
Underwater
• Slower Curing
�����������������������
�����������
Tested by
Pure Epoxy Solvent Free 1:1
PUR400
Ordering Information
12pcs per Carton 400ml + 1 mixer per cartridge.
Part BU - PUR400
24 Months Shelf Life
*This resin will not cure below +5°C
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M12 M16 M20 M24 M30
NUMBER OF HOLES PER 400ML CARTRIDGE 33 18 8 4 2
magazine.indd 5 19/09/2011 15:11:14
solvent
free
Page 3
magazine.indd 4 19/09/2011 15:11:00
ADVANCE FIXINGS
solvent
free
Page 3
Product Description
Key Features
Typical Gel and Curing Time*BASE MATERIAL TEMPERATURE (°C) 35 25 15 5* 0
TYPICAL GEL TIME (mins) 20 40 60 180 -
MIN. LOAD TIME (mins) 180 240 300 960 -
PUR400 is a pure epoxy fi xing resin designed for high load bearing applications in concrete. This product is solvent free with virutally no odour, to allow safe use indoors or in confi ned spaces. Suitable particularly for rebars and large diameter and deep threaded stud fi xings due to its slow gelling action, and zero shrinkage.
• Used in Wet Holes or Underwater.
• Ideal for Deep Embedment.
• Longer Working Times, for use with Rebar.
• Highest Durability.
• No Shrinkage.
BS6920 approved For use withPotable drinking water.
concrete stone marble rebar wet diamonddrilled
Page 4
Approvals
INSTYTUT TECHNIKI BUDOWLANEJ
Aprobacie Technicznej ITB
Main Application Types
• Large Diameter &
Deep Embedment
Fixings
• Rebar Fixing
• Diamond Drilled
Holes
• High Loading
• Chemical Exposure
• Dynamic Loads
• Wet and
Underwater
• Slower Curing
�����������������������
�����������
Tested by
Pure Epoxy Solvent Free 1:1
PUR400
Ordering Information
12pcs per Carton 400ml + 1 mixer per cartridge.
Part BU - PUR400
24 Months Shelf Life
*This resin will not cure below +5°C
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M12 M16 M20 M24 M30
NUMBER OF HOLES PER 400ML CARTRIDGE 33 18 8 4 2
magazine.indd 5 19/09/2011 15:11:14
solvent
free
Page 3
magazine.indd 4 19/09/2011 15:11:00
ADVANCE FIXINGS
VYLSF 345
Key Features• Safety & Critical Loads.
• Suited for Overhead & Underwater Applications.
• European Technical Approval (Option 7).
• High Chemical Resistance.
• Guaranteed 50 years working life of the fi xing.
CE Approval
Vinylester Styrene Free 10:1
brick hollow concrete stone marble rebar wet
�����������������������
�����������
Page 6
VYLSF345
Typical Gel and Curing TimeBASE MATERIAL TEMPERATURE (°C) 35 25 15 5 -5 -10*
TYPICAL GEL TIME (mins) 3 6 7 20 50 60
MIN. LOAD TIME (mins) 20 20 20 30 90 180
Main Application Types• Bridges, Tunnels
• Overhead Fixings
• Safety Critical
Applications
• High Loading
• Dynamic Loads
• Wet and
Underwater
• Rebar Fixing
Approvals
Ordering Information
Tested by
ETA Approval
*Resin Temperature must be at least 20°C
e 10:1
ETAG 001 - OPTION 7
12pcs per Carton 345ml + 1 mixer per cartridge.
Part BU - VYLSF345
12 Months Shelf Life
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M12 M16 M20 M24 M30
NUMBER OF HOLES PER 345ML CARTRIDGE 28 15 6 4 2
VYLSF345 Is a pure vinlyester based resin designed for high load bearing applications in concrete. This product is also designed without styrene to allow safe use in confi ned spaces. Very high chemical resistance and durability. Suitable for large diameter fi xing bolts, posts, threaded rods, studs and anchors.
magazine.indd 7 19/09/2011 15:11:35
ETAG 001 - OPTION 7
Page 5
styrene
free
magazine.indd 6 19/09/2011 15:11:17
ADVANCE FIXINGS
ETAG 001 - OPTION 7
Page 5
styrene
free
VYLSF 345
Key Features• Safety & Critical Loads.
• Suited for Overhead & Underwater Applications.
• European Technical Approval (Option 7).
• High Chemical Resistance.
• Guaranteed 50 years working life of the fi xing.
CE Approval
Vinylester Styrene Free 10:1
brick hollow concrete stone marble rebar wet
�����������������������
�����������
Page 6
VYLSF345
Typical Gel and Curing TimeBASE MATERIAL TEMPERATURE (°C) 35 25 15 5 -5 -10*
TYPICAL GEL TIME (mins) 3 6 7 20 50 60
MIN. LOAD TIME (mins) 20 20 20 30 90 180
Main Application Types• Bridges, Tunnels
• Overhead Fixings
• Safety Critical
Applications
• High Loading
• Dynamic Loads
• Wet and
Underwater
• Rebar Fixing
Approvals
Ordering Information
Tested by
ETA Approval
*Resin Temperature must be at least 20°C
e 10:1
ETAG 001 - OPTION 7
12pcs per Carton 345ml + 1 mixer per cartridge.
Part BU - VYLSF345
12 Months Shelf Life
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M12 M16 M20 M24 M30
NUMBER OF HOLES PER 345ML CARTRIDGE 28 15 6 4 2
VYLSF345 Is a pure vinlyester based resin designed for high load bearing applications in concrete. This product is also designed without styrene to allow safe use in confi ned spaces. Very high chemical resistance and durability. Suitable for large diameter fi xing bolts, posts, threaded rods, studs and anchors.
magazine.indd 7 19/09/2011 15:11:35
ETAG 001 - OPTION 7
Page 5
styrene
free
magazine.indd 6 19/09/2011 15:11:17
ADVANCE FIXINGS
Product Description
Key Features
Typical Gel and Curing TimeBASE MATERIAL TEMPERATURE (°C) 35 25 15 5 -5 -10*
TYPICAL GEL TIME (mins) 3 6 8 18 50 60
MIN. LOAD TIME (mins) 20 20 20 30 90 180
EPSF Is an epoxy acrylate based fi xing resin designed for load bearing applications in concrete. This product is also designed without styrene for use in confi ned areas. Suitable for bolts, posts, threaded rods, studs and anchors. Ideal for outdoors use.
• Used in Wet Holes & Underwater.
• 300ml & 410ml Foil Bag Easy Opening Cartridges.
• Medium & Heavy Duty Load Applications.
• Non-Flammable & Non-Hazardous.
• Ideal for Confi ned Spaces (Low Odour)
brick hollow concrete stone marble rebar wet
Page 8
Approvals
European Approval ETAG 029For Use in Masonry
Main Application Types• Medium Loading
• High Durability
• Indoor & Outdoor
Use
• Chemical Exposure
• Dynamic Loads
• Wet and
Underwater
• Close to the edge
fi xings
Epoxy Acrylate Styrene Free 10:1
EPSF300 & 410
�����������������������
�����������
Tested by
Ordering Information
*Resin Temperature must be at least 20°C
15pcs per Carton 300ml + 1 mixer per cartridge.
12pcs per Carton 410ml +1 mixer per cartridge.
Part BU - EPSF300 - 300ml Part BU - EPSF410 - 410ml
12 Months Shelf Life
ETAG 029 USE IN MASONRY
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M8 M10 M12 M16 M20
NUMBER OF HOLES PER 300ML CARTRIDGE 66 41 24 13 5
NUMBER OF HOLES PER 410ML CARTRIDGE 92 57 34 18 8
BUFFA SealCARTRIDGE INNOVATION
Medload
magazine.indd 9 19/09/2011 15:11:57
styrene
free
Page 7
magazine.indd 8 19/09/2011 15:11:37
ADVANCE FIXINGS
styrene
free
Page 7
Product Description
Key Features
Typical Gel and Curing TimeBASE MATERIAL TEMPERATURE (°C) 35 25 15 5 -5 -10*
TYPICAL GEL TIME (mins) 3 6 8 18 50 60
MIN. LOAD TIME (mins) 20 20 20 30 90 180
EPSF Is an epoxy acrylate based fi xing resin designed for load bearing applications in concrete. This product is also designed without styrene for use in confi ned areas. Suitable for bolts, posts, threaded rods, studs and anchors. Ideal for outdoors use.
• Used in Wet Holes & Underwater.
• 300ml & 410ml Foil Bag Easy Opening Cartridges.
• Medium & Heavy Duty Load Applications.
• Non-Flammable & Non-Hazardous.
• Ideal for Confi ned Spaces (Low Odour)
brick hollow concrete stone marble rebar wet
Page 8
Approvals
European Approval ETAG 029For Use in Masonry
Main Application Types• Medium Loading
• High Durability
• Indoor & Outdoor
Use
• Chemical Exposure
• Dynamic Loads
• Wet and
Underwater
• Close to the edge
fi xings
Epoxy Acrylate Styrene Free 10:1
EPSF300 & 410
�����������������������
�����������
Tested by
Ordering Information
*Resin Temperature must be at least 20°C
15pcs per Carton 300ml + 1 mixer per cartridge.
12pcs per Carton 410ml +1 mixer per cartridge.
Part BU - EPSF300 - 300ml Part BU - EPSF410 - 410ml
12 Months Shelf Life
ETAG 029 USE IN MASONRY
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M8 M10 M12 M16 M20
NUMBER OF HOLES PER 300ML CARTRIDGE 66 41 24 13 5
NUMBER OF HOLES PER 410ML CARTRIDGE 92 57 34 18 8
BUFFA SealCARTRIDGE INNOVATION
Medload
magazine.indd 9 19/09/2011 15:11:57
styrene
free
Page 7
magazine.indd 8 19/09/2011 15:11:37
ADVANCE FIXINGS
Product Description
Key Features
Approvals
Typical Gel and Curing TimeBASE MATERIAL TEMPERATURE (°C) 35 25 15 5 -5 -10*
TYPICAL GEL TIME (mins) 3 8 13 21 50 60
MIN. LOAD TIME (mins) 20 20 20 30 90 180
XPSF is a polyester based fi xing resin designed for load bearing applications in brick, hollow, or aerated concrete. Designed without styrene for use in confi ned areas. Used for fi xing bolts, posts, threaded studs and a variety of anchors.
• Ideal for Indoor Usage (Low Odour).
• 300ml & 410ml Foil Bag Easy Opening Cartridges.
• Medium Duty Load Applications.
• Non Flammable and Non-Hazardous.
• For use in Hollow Wall, Brickwork and Masonry.
Page 17Page 10
Main Application Types• Hollow Wall with
Perforated Sleeve
• Masonry Fixings
• Close to the edge
fi xings
• Medium Load Fixings
563
CAZ 0834/1
Designed without styrene for use in confi ned areas. Used for fi xing bolts, posts, threaded studs and a
Also recommended for use with perforated nylon sleeves, metal internal threaded sockets and metal perforated sleeve.
*Resin Temperature must be at least 20°C
Polyester Styrene Free 10:1
XPSF300 & 410
Ordering Information
15pcs per Carton 300ml + 1 mixer per cartridge.
12pcs per Carton 410ml +1 mixer per cartridge.
Part BU - XPSF300 - 300ml Part BU - XPSF410 - 410ml
12 Months Shelf Life
brick hollow concrete stone marble rebar wet
European Approval ETAG 029For Use in Masonry
ETAG 029 USE IN MASONRY
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M8 M10 M12 M16 M20
NUMBER OF HOLES PER 300ML CARTRIDGE 66 41 24 13 5
NUMBER OF HOLES PER 410ML CARTRIDGE 92 57 34 18 8
BUFFA SealCARTRIDGE INNOVATION
Stdload
magazine.indd 11 19/09/2011 15:12:18
low
odour
Page 9
magazine.indd 10 19/09/2011 15:12:00
ADVANCE FIXINGS
low
odour
Page 9
Product Description
Key Features
Approvals
Typical Gel and Curing TimeBASE MATERIAL TEMPERATURE (°C) 35 25 15 5 -5 -10*
TYPICAL GEL TIME (mins) 3 8 13 21 50 60
MIN. LOAD TIME (mins) 20 20 20 30 90 180
XPSF is a polyester based fi xing resin designed for load bearing applications in brick, hollow, or aerated concrete. Designed without styrene for use in confi ned areas. Used for fi xing bolts, posts, threaded studs and a variety of anchors.
• Ideal for Indoor Usage (Low Odour).
• 300ml & 410ml Foil Bag Easy Opening Cartridges.
• Medium Duty Load Applications.
• Non Flammable and Non-Hazardous.
• For use in Hollow Wall, Brickwork and Masonry.
Page 17Page 10
Main Application Types• Hollow Wall with
Perforated Sleeve
• Masonry Fixings
• Close to the edge
fi xings
• Medium Load Fixings
563
CAZ 0834/1
Designed without styrene for use in confi ned areas. Used for fi xing bolts, posts, threaded studs and a
Also recommended for use with perforated nylon sleeves, metal internal threaded sockets and metal perforated sleeve.
*Resin Temperature must be at least 20°C
Polyester Styrene Free 10:1
XPSF300 & 410
Ordering Information
15pcs per Carton 300ml + 1 mixer per cartridge.
12pcs per Carton 410ml +1 mixer per cartridge.
Part BU - XPSF300 - 300ml Part BU - XPSF410 - 410ml
12 Months Shelf Life
brick hollow concrete stone marble rebar wet
European Approval ETAG 029For Use in Masonry
ETAG 029 USE IN MASONRY
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M8 M10 M12 M16 M20
NUMBER OF HOLES PER 300ML CARTRIDGE 66 41 24 13 5
NUMBER OF HOLES PER 410ML CARTRIDGE 92 57 34 18 8
BUFFA SealCARTRIDGE INNOVATION
Stdload
magazine.indd 11 19/09/2011 15:12:18
low
odour
Page 9
magazine.indd 10 19/09/2011 15:12:00
ADVANCE FIXINGS
Product Description
Key Features
Typical Gel and Curing TimeBASE MATERIAL TEMPERATURE (°C) 25 15 5 -5 -10*
TYPICAL GEL TIME (mins) 7 11 21 50 60
MIN. LOAD TIME (mins) 20 20 30 90 180
XP is a polyester based fi xing resin designed as an economical solution for chemical anchoring in low exposure areas, with lightweight to medium loads. Particularly suitable for anchoring studs and bolts into hollow walls and masonry.
Page 12
Approvals
INSTYTUT TECHNIKI BUDOWLANEJ
Aprobacie Technicznej ITB
loads. nd bolts into nd bolts into
Polyester 10:1
XP300 & 410
• Hollow Wall with
Perforated Sleeve
• Masonry Fixings
• Close to the edge
fi xings
• Medium Load Fixings
• Areas of low
exposure
• Ideal for use in Low Exposure situations.
• Economical Fixing Resin.
• Medium Duty Load Applications.
• 300ml & 410ml Foil Bag Easy Opening Cartridges.
• For use in Hollow Wall, Brickwork and Masonry.
Ordering Information
15pcs per Carton 300ml + 1 mixer per cartridge.
12pcs per Carton 410ml +1 mixer per cartridge.
Part BU - XP300 - 300ml Part BU - XP410 - 410ml
12 Months Shelf Life
563
CAZ 0834/1
brick hollow concrete stone marble rebar wet
*Resin Temperature must be at least 20°C
Main Application Types
Also recommended for use with perforated nylon sleeves, metal internal threaded sockets and metal perforated sleeve.
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M8 M10 M12 M16 M20
NUMBER OF HOLES PER 300ML CARTRIDGE 66 41 24 13 5
NUMBER OF HOLES PER 410ML CARTRIDGE 92 57 34 18 8
BUFFA SealCARTRIDGE INNOVATION
Stdload
magazine.indd 13 19/09/2011 15:12:37
Page 11
magazine.indd 12 19/09/2011 15:12:20
ADVANCE FIXINGS
Page 11
Product Description
Key Features
Typical Gel and Curing TimeBASE MATERIAL TEMPERATURE (°C) 25 15 5 -5 -10*
TYPICAL GEL TIME (mins) 7 11 21 50 60
MIN. LOAD TIME (mins) 20 20 30 90 180
XP is a polyester based fi xing resin designed as an economical solution for chemical anchoring in low exposure areas, with lightweight to medium loads. Particularly suitable for anchoring studs and bolts into hollow walls and masonry.
Page 12
Approvals
INSTYTUT TECHNIKI BUDOWLANEJ
Aprobacie Technicznej ITB
loads. nd bolts into nd bolts into
Polyester 10:1
XP300 & 410
• Hollow Wall with
Perforated Sleeve
• Masonry Fixings
• Close to the edge
fi xings
• Medium Load Fixings
• Areas of low
exposure
• Ideal for use in Low Exposure situations.
• Economical Fixing Resin.
• Medium Duty Load Applications.
• 300ml & 410ml Foil Bag Easy Opening Cartridges.
• For use in Hollow Wall, Brickwork and Masonry.
Ordering Information
15pcs per Carton 300ml + 1 mixer per cartridge.
12pcs per Carton 410ml +1 mixer per cartridge.
Part BU - XP300 - 300ml Part BU - XP410 - 410ml
12 Months Shelf Life
563
CAZ 0834/1
brick hollow concrete stone marble rebar wet
*Resin Temperature must be at least 20°C
Main Application Types
Also recommended for use with perforated nylon sleeves, metal internal threaded sockets and metal perforated sleeve.
Number of Fixing Holes per CartridgeSTUD DIAMETER (STANDARD EMBEDMENT) M8 M10 M12 M16 M20
NUMBER OF HOLES PER 300ML CARTRIDGE 66 41 24 13 5
NUMBER OF HOLES PER 410ML CARTRIDGE 92 57 34 18 8
BUFFA SealCARTRIDGE INNOVATION
Stdload
magazine.indd 13 19/09/2011 15:12:37
Page 11
magazine.indd 12 19/09/2011 15:12:20
ADVANCE FIXINGS
Hole Cleaning Accessories
Push Pumps
Steel Hole Cleaning Brushes
190mm / 280mm / 400mm
10mm / 13mm / 18mm / 28mm
Chemical Anchoring Accessories
Mixer Nozzles & Extensions
Hollow Wall Accessories
Easy-Flow Nozzle Mixer Extension
Nylon Perforated Sleeves
Metal Perforated Sleeves 1 Metre
12/50 - 20/85 - 16/85 - 16/135
12mm, 16mm, 22mm, 26mm Ø
Internal Threaded Sockets
Asphalt Fixings
M12 x 70mm / M12 x 100mm
Page 14
Chemical Anchoring Accessories
190mm and 135mm size with or without hanger
Nylon Extension Tube 250mm or 1000mm
For Deep Embedments
M6, M8, M10, M12 Ø
BUFFALO™
Steel Studs Zinc, Galvanised or Stainless Steel
Chemical Anchor Studs
M8 x 110 / M10 x 130 / M12 x 160 / M16 x 190M20 x 260 / M24 x 300
M30 by special order.
Non-standard lengths available by special order .
magazine.indd 15 19/09/2011 15:12:50
Manual Extrusion Tools
Page 13
Manual Extrusion Tools
Chemical Anchoring AccessoriesBUFFALO™
BUFFA SealCARTRIDGE INNOVATION
Cartridge Types
BUFFA Seal is an evolu� on of the Foil bag design. The “Self opening” cap making it safer to open, easier & faster to extrude. It uses less packaging than a conven� onal co-axial cartridge.
PATENTED
300ml 10:1 410ml 10:1 345ml 10:1 400ml 1:1
300m
l BU
FFA
Sea
l
410m
l BU
FFA
Sea
l
345m
l 10:
1 S
BS
400m
l 1:1
SB
S
magazine.indd 14 19/09/2011 15:12:43
ADVANCE FIXINGS
Manual Extrusion Tools
Page 13
Manual Extrusion Tools
Chemical Anchoring AccessoriesBUFFALO™
BUFFA SealCARTRIDGE INNOVATION
Cartridge Types
BUFFA Seal is an evolu� on of the Foil bag design. The “Self opening” cap making it safer to open, easier & faster to extrude. It uses less packaging than a conven� onal co-axial cartridge.
PATENTED
300ml 10:1 410ml 10:1 345ml 10:1 400ml 1:1
300m
l BU
FFA
Sea
l
410m
l BU
FFA
Sea
l
345m
l 10:
1 S
BS
400m
l 1:1
SB
S
Hole Cleaning Accessories
Push Pumps
Steel Hole Cleaning Brushes
190mm / 280mm / 400mm
10mm / 13mm / 18mm / 28mm
Chemical Anchoring Accessories
Mixer Nozzles & Extensions
Hollow Wall Accessories
Easy-Flow Nozzle Mixer Extension
Nylon Perforated Sleeves
Metal Perforated Sleeves 1 Metre
12/50 - 20/85 - 16/85 - 16/135
12mm, 16mm, 22mm, 26mm Ø
Internal Threaded Sockets
Asphalt Fixings
M12 x 70mm / M12 x 100mm
Page 14
Chemical Anchoring Accessories
190mm and 135mm size with or without hanger
Nylon Extension Tube 250mm or 1000mm
For Deep Embedments
M6, M8, M10, M12 Ø
BUFFALO™
Steel Studs Zinc, Galvanised or Stainless Steel
Chemical Anchor Studs
M8 x 110 / M10 x 130 / M12 x 160 / M16 x 190M20 x 260 / M24 x 300
M30 by special order.
Non-standard lengths available by special order .
magazine.indd 15 19/09/2011 15:12:50
Manual Extrusion Tools
Page 13
Manual Extrusion Tools
Chemical Anchoring AccessoriesBUFFALO™
BUFFA SealCARTRIDGE INNOVATION
Cartridge Types
BUFFA Seal is an evolu� on of the Foil bag design. The “Self opening” cap making it safer to open, easier & faster to extrude. It uses less packaging than a conven� onal co-axial cartridge.
PATENTED
300ml 10:1 410ml 10:1 345ml 10:1 400ml 1:1
300m
l BU
FFA
Sea
l
410m
l BU
FFA
Sea
l
345m
l 10:
1 S
BS
400m
l 1:1
SB
S
magazine.indd 14 19/09/2011 15:12:43
ADVANCE FIXINGS
BUFFALO™
Approved Distributor:
magazine.indd 16 19/09/2011 15:12:50
ADVANCE FIXINGS
Chemical Anchoring Range
BUFFALO™
magazine.indd 1 19/09/2011 15:09:53