Flat Panel Monitors

Bid-Spec

1.0 Description

High resolution 15- and 17-inch LCD multi-mode monitors, capable of 1024x768 (XGA) or 1280 x 1024 (SXGA, 17-inch model only) display and auto-sensing NTSC/PAL input.

2.0 Performance Specifications

The LCD monitors shall provide an active matrix display capable of displaying high-resolution analog computer signals up to 1024x768 pixels for 15-inch model or 1280 x 1024 pixels for 17-inch model at 75 Hz. The display must automatically adapt to the appropriate input resolution. The LCD monitors must automatically detect and display all inputs, including composite NTSC/PAL video or computer signals. The LCD monitors must offer looping inputs for S-Video (Y/C) or BNC type connections.

The LCD monitor must be capable of displaying a maximum of 16.7 million colors.

The 17-inch LCD monitor must provide a viewing angle of ± 75° (horizontal) or ± 70° (vertical). The 17-inch LCD monitor must provide a tilt of -5° to 20°, a contrast ratio of 400:1, a brightness of 430 cd/m2, and a response time of 25msec.

The 15-inch LCD monitor must provide a viewing angle of ± 60° (horizontal) or ± 60° (vertical). The 15-inch LCD monitor must provide a tilt of -5° to 20°, a contrast ratio of 300:1, a brightness of 250 cd/m2, and a response time of 25msec.

Each model must include a detachable base and VESA compliant mounting holes. In addition, VESA compliant mounting accessories must be available to mount the LCD monitors in rack, wall or pole applications.

The monitor must include a universal power supply, allowing it to be compatible with a voltage range of 100 - 240 VAC (50/60 Hz). Power consumption must not exceed 45 watts.

The LCD monitors must be shipped with both North American NEMA 5-15P and Continental European CE 7/7 power cords terminating in a standard IEC320 configuration.

The monitor must contain a latching power switch which remains in the set position, either on or off, regardless of incoming power status. This means that the unit does not have to be physically turned back on after a power loss.

The LCD monitor shall provide on-screen display (OSD) for adjusting monitor settings including brightness, contrast, auto adjust, phase clock, horizontal position, vertical position, sharpness, and color temperature.

The monitor must be able to operate to full specifications within the normal temperature range of 10° to 40° C (50° to 104° F) and a storage temperature range of -20° to 60° C (-4° to 113° F).

The LCD monitor shall be an ADMNM1LCD series or equivalent.

3610-0224-14, Rev. A1 ADMNM1LCD Series Monitors Page 1 of 4

Architect & Engineer Specification Color Monitors

Quick-Spec

3.0 Minimum Performance Specifications

The LCD monitor must meet the following requirements:

GeneralLCD Panels:..........................................Active matrix TFTPixel Pitch ............................................0.264 (H) x 0.264 (V) mm

(ADMNM1LCD17)0.297 (H) x 0.297 (V) mm (ADMNM1LCD15)

Viewing Angle......................................±75° (H) ±70° (V) (ADMNM1LCD17)±60° (H) ±60° (V) (ADMNM1LCD15)

Viewing Area .......................................338 (H) x 270 (V) mm (ADMNM1LCD17)304 (H) x 228 (V) mm (ADMNM1LCD15)

Color ....................................................16.7 million (max)Brightness ............................................430 cd/m2 (ADMNM1LCD17)

250 cd/m2 (ADMNM1LCD15)Contrast ................................................400:1 (ADMNM1LCD17)

300:1 (ADMNM1LCD15)Resolution ............................................1280 x 1024 (ADMNM1LCD17)

1024 x 768 (ADMNM1LCD15)Tilt:.......................................................-5°to 20°Response Time:.....................................25 ms (Tr+Tf) (typical)

ElectricalPower Supply........................................100/240 VAC, 60/50 Hz auto

switchConsumption.........................................45 watts max, standby 5 wattsTV System............................................NTSC/PAL auto detectionScan Frequency.....................................NTSC: 15750 Hz ± 500 Hz/60 Hz

PAL: 15625 Hz ± 500 Hz/50 Hz

MechanicalDimensions (H x W x D)

Without Base............................40.05 x 33.02 x 6.35 cm (15.75 x 13.0 x 2.50 in)

With Base.................................40.05 x 40.95 x 18.41 cm(15.75 x 16.13 x 7.25 in)

Unit WeightWithout Base............................4.8 kg (10.5lbs)

(ADMNM1LCD17)4.3 kg (9.5 lbs) (ADMNM1LCD15)

With Base.................................5.4 kg (12.0 lbs) (ADMNM1LCD17)5.0 kg (11.0 lbs) (ADMNM1LCD15)

3610-0224-14, Rev. A1 ADMNM1LCD Series Monitors Page 2 of 4

Architect & Engineer Specification Color Monitors

Quick-Spec (continued)Mechanical (continued)

Shipping InformationWeight......................................6.8kg (15.0 lbs) (ADMNM1LCD17)

6.4 kg (14.0 lbs) (ADMNM1LCD15)Color:....................................................Black plastic bezel with Black cabinetConstruction:.........................................PlasticMounting:.............................................Detachable base with rack, pole or wall

mounting options

EnvironmentalTemperature:

Operating..................................10° to 40° C (50° to 104° F)Storage......................................-20° to 60° C (-4° to 113° F)

Humidity:Operating..................................20 - 80% RH (non-condensing)Storage......................................10 - 95% RH (non-condensing)

Altitude.................................................15,240 m (50,000 ft)

Inputs/OutputsVideo....................................................1 in (BNC); 1.0 V pp 75Ω

1 loop-through out (BNC)S-Video.................................................1 in (DIN-4), 1 V pp 75Ω

1 loop-through out (DIN-4)Audio....................................................2 in (RCA); 0.7 V pp at 1 KHz

2 loop-through out (RCA)XGA.....................................................1 in (D-sub 15 pin); 0.7 V pp 75ΩSpeaker Output......................................2 x 1.0 watts built-in

ControlsFront Panel Controls..............................Power, Auto Adjust, Menu, Up,

DownOSD Controls........................................Brightness, Contrast, Auto Adjust,

Phase Clock, Horizontal Position, Vertical Position, Sharpness, Color Temperature, Language, Light Sensor, OSD Position, Video Select, Recall

3610-0224-14, Rev. A1 ADMNM1LCD Series Monitors Page 3 of 4

Architect & Engineer Specification Color Monitors

Quick-Spec (continued)Regulatory

Emissions..............................................EN50081-1, FCC Class B

Immunity...............................................EN50082-1

Safety....................................................EN60950, UL1950, CSA 950

3610-0224-14, Rev. A1 ADMNM1LCD Series Monitors Page 4 of 4