adjustability · 2020-06-24 · • the led slim disk is ic-rated and air-tight ready and may be in...

3
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. www.iuseelite.com 4” 4 Inch Resseced Gimbal with Optic RL473 NOMINAL LUMENS DELIVERED LUMENS WATTAGE 700 741 8.9 W Based on 3000K, 90+ CRI. Actual wattage may vary +/- 5% 4-7/8” 1-3/8” ADJUSTABILITY OPEN 3.3” 7” 4.1” 1.25” Cut hole in ceiling. Insert luminaire into opening by squeezing spring clips on both sides of luminaire. The width in ceiling needed for the driver to fit is 3”. INSTALLATION FEATURES A high performance 4” LED luminaire, engineered for New Construction, Remodel or Retrofit to accommodate insulated or dropped ceiling installations. It is easily installed and is supplied with a remote driver. Its small aperture and shallow depth make it an ideal choice for unlimited applications. • The LED slim disk is IC-Rated and Air-Tight ready and may be in direct contact with insulation. • Can be installed in applications with plenum clearance. • LED Slim disk may be installed in dry wall or suspended ceilings. • 90 CRI standard. • Flicker-free 120V forward-phase triac dimming down to 5%. • Energy-Star, JA8 compliant. • Even illumination of luminaire is achieved by utilizing patent-pending optics along with edge lit technology of LEDs. • Aluminum die-cast body and trim. • Estimated life output of 70% at 50,000 hours of life requiring virtually no maintenance. • Ideal for applications where ceiling or top access is not available to service these luminaires. • Ideal for applications where traditional recessed downlights may not be used because of limited plenum space. LUMENS DIMMING CCT COLOR QUALITY CRI EMERGENCY LIFETIME CONSTRUCTION TRIM OPTION BEAM ANGLE TRIM COLORS 700 DIMTR (Triac) 30K/40K/50K 3-Step MacAdam Ellipse 90+ 16W high voltage inverter 50,000 Hours Cast aluminum trim Round Adjustable 90 Degree WH (White) PHOTOMETRIC TESTS In Accordance with IES LM79-08, LM80 and TM-30, TM-21

Upload: others

Post on 12-Jul-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ADJUSTABILITY · 2020-06-24 · • The LED slim disk is IC-Rated and Air-Tight ready and may be in direct contact with insulation. • Can be installed in applications with plenum

Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m

4”4 Inch Resseced Gimbal with OpticRL473

NOMINAL LUMENS DELIVERED LUMENS WATTAGE

700 741 8.9 W

Based on 3000K, 90+ CRI. Actual wattage may vary +/- 5%

SLIM SURFACE LEDProject Name:

Note: Type:

Catalog Number:

Submittal form is available @ www.iuseeliteled.comTel: 323-888-1973 • Fax: 323-888-1977

Specifications and Dimensions subject to change without notice.

5/8” Thick Surface LED Fixture

Round LED Slim Surface Mount Dimmable Fixture

SPECIFICATIONS:

APERTURE 5.5” 7” 9” 11”

LUMENS 600 lumens 900 lumens 1200 lumens 1500 lumens

WATTAGE 10W 15W 18W 22W

CCT 30K/40K/50K

CRI 90

VOLTAGE 120V

POWER FREQUENCY 50/60 Hz

FINISH White

AMBIENT ENVIRONMENT Damp location

Ordering Information: Example: RL791-900L-DIMTR-120-30K/40K/50K-90-WH

FIELD SELECTABLE CCT SLIM SURFACE MOUNT DOWNLIGHT

SERIES/APERTURE/LUMENSRL591-600L

RL791-900L

RL991-1200L

RL1191-1500L

- 5-3/8” aperture/600 lumens

- 7-7/8” aperture/900 lumens

- 9” aperture/1200 lumens

- 12” aperture/1500 lumens

CCT30K/40K/50K - 3000K/4000K/500K

CRI90 - 90+ CRI

VOLTAGE120 - 120V

DIMMINGDIMTR - Triac

FINISHWHBZBN

- White- Bronze- Brushed Nickel

3.5” Round(Plastic)

Pancake J-Box(Metal)

4” Square(Plastic)

4” Octagonal(Metal)

4” Square(Metal)

Fire Rated J-Box

Note: A 2-1/8” deep octagon junction box is recommended for through circuit wiring applications.

Compatible Junction Boxes:

ENGINEERED FOR VERSATILITY AND PERFORMANCEThe Elite LED Slim Surface Mount has been engineered to install into most standard junctions boxes. Up to 1500 usable lumens are directed from the luminaire to the work surface. Easy to Install, applicable toJunction Box or Recessed Can Installation

OPTICSThe Elite LED Module system is much more than just a simple LED retrofit.The Elite LED system is a highly engineered work of design and optical science which produces up to 1500 lumens. Our meticulously crafted optics gather the light scattered by the LED chip and shape it into a functional beam with uniform light distribution.

DIMMINGIntended for Triac (120V) base on configuration. Minimum 90º supply conductors.

COMPLIANCENon-conductive fixture for shower light application. Product complies with the requirements of the California Energy Commission regulated under Title 24.

LISTINGETL listed for damp location (wet location - with covered ceilings)Energy Star certified

WARRANTYThe Elite LED lighting system carries a five-year carefree warranty for parts and components. (Labor not included)

12”

9”

7-7/8”5-3/8”

4-7/8”

1-3/8”

ADJUSTABILITY

OPEN

4 3.3”

7” 4.1”

1.25”

Cut hole in ceiling. Insert luminaire into opening by squeezing spring clips on both sides of luminaire. The width in ceiling needed for the driver to fit is 3”.

INSTALLATION

FEATURESA high performance 4” LED luminaire, engineered for New Construction, Remodel or Retrofit to accommodate insulated or dropped ceiling installations. It is easily installed and is supplied with a remote driver. Its small aperture and shallow depth make it an ideal choice for unlimited applications.

• The LED slim disk is IC-Rated and Air-Tight ready and may be in direct contactwith insulation.

• Can be installed in applications with plenum clearance.• LED Slim disk may be installed in dry wall or suspended ceilings.• 90 CRI standard.• Flicker-free 120V forward-phase triac dimming down to 5%.• Energy-Star, JA8 compliant.• Even illumination of luminaire is achieved by utilizing patent-pending optics

along with edge lit technology of LEDs.• Aluminum die-cast body and trim.• Estimated life output of 70% at 50,000 hours of life requiring virtually no

maintenance.• Ideal for applications where ceiling or top access is not available to service

these luminaires.• Ideal for applications where traditional recessed downlights may not be used

because of limited plenum space.

LUMENS

DIMMING

CCT

COLOR QUALITY

CRI

EMERGENCY

LIFETIME

CONSTRUCTION

TRIM OPTION

BEAM ANGLE

TRIM COLORS

700

DIMTR (Triac)

30K/40K/50K

3-Step MacAdam Ellipse

90+

16W high voltage inverter

50,000 Hours

Cast aluminum trim

Round Adjustable

90 Degree

WH (White)

PHOTOMETRIC TESTS In Accordance with IES LM79-08, LM80 and TM-30, TM-21

Page 2: ADJUSTABILITY · 2020-06-24 · • The LED slim disk is IC-Rated and Air-Tight ready and may be in direct contact with insulation. • Can be installed in applications with plenum

Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m

4”4 Inch Resseced Gimbal with OpticRL473

TYPE LUMEN CCT CRI FINISHRL473 o 700L-DIMTR-120 o 30K/40K/50K o 90+ o WH-White

EXAMPLE: RL473-700L-DIMTR-120-30K/40K/50K-90-WH

26"

6 18 "

2 34 "

4 12 "

13"

3 116 "

316 "

26"

13" 2 1516 "

6 18 "

4 12 "

3 116 "

316 "

4 14 "

26"13"

6 18 " 4 9

16 "

3 116 "

316 "

26” 13” 4-1/4”

3-1/16”

3/16”

6-1/8” 6-9/16”

RL-ACC-SLIM-1-10F

SLIM TRIM ACCESSORIES

OPTIONSo RL-ACC-SLIM-1-10F - 10ft Logn Extensiono RL-ACC-SLIM-1-20F - 20ft Logn Extensiono RL-UNV-4/5/6 - Universal Mount Plate for 4”,5” and 6”o RL-ACC-SLIM-4-ROUGHPLATE - 4” Rougn Plate

442

2”

I S S U E 1 5 G 2 1 R e v . 0 . 1

WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333

S H I P P I N G AVA I L A B L E

1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS

w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.

w Cast aluminum trim

w Dimmable

w ETL approved and Energy Star Certified

w Type IC Rated – Approved for direct contact with insulation

w Air-tight and damp location approved

w Fast and easy to install in limited space locations

w External driver factory mounted inside connection box - 120V

w New construction rough-in plates and jumper cables available

w Available Temperatures (3000K, 3500K and 4000K)

w 50,000 Hours Life; 5 Year Warranty

TECHNICAL SPECIFICATIONS

w WATTAGES: 5W

w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)

w CRI: 90+

w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)

w ADJUSTABLE: 30º tilt and 360º rotation

CERTIFICATIONS• ETL listed• ENERGY STAR

INSTALLATION

• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".

360DIMENSION

INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS

120 60Hz <20% >0.98 5W(+/-5%) 360L

12-7/8”

2-3/4”

1-3/4”

2”

TYPE LUMEN CCT CRI FINISH ACCESSORIES

RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K

90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F

EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH

RL-ACC-SLIM-1-10F10-ft long extension

RL-ACC-SLIM-1-20F20-ft long extension

2

INC

H

LE

D

RE

TR

OF

IT

MO

DU

LE

RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR

2-1/2”

1-5/8”

442

2”

I S S U E 1 5 G 2 1 R e v . 0 . 1

WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333

S H I P P I N G AVA I L A B L E

1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS

w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.

w Cast aluminum trim

w Dimmable

w ETL approved and Energy Star Certified

w Type IC Rated – Approved for direct contact with insulation

w Air-tight and damp location approved

w Fast and easy to install in limited space locations

w External driver factory mounted inside connection box - 120V

w New construction rough-in plates and jumper cables available

w Available Temperatures (3000K, 3500K and 4000K)

w 50,000 Hours Life; 5 Year Warranty

TECHNICAL SPECIFICATIONS

w WATTAGES: 5W

w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)

w CRI: 90+

w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)

w ADJUSTABLE: 30º tilt and 360º rotation

CERTIFICATIONS• ETL listed• ENERGY STAR

INSTALLATION

• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".

360DIMENSION

INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS

120 60Hz <20% >0.98 5W(+/-5%) 360L

12-7/8”

2-3/4”

1-3/4”

2”

TYPE LUMEN CCT CRI FINISH ACCESSORIES

RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K

90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F

EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH

RL-ACC-SLIM-1-10F10-ft long extension

RL-ACC-SLIM-1-20F20-ft long extension

2

INC

H

LE

D

RE

TR

OF

IT

MO

DU

LE

RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR

2-1/2”

1-5/8”

442

2”

I S S U E 1 5 G 2 1 R e v . 0 . 1

WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333

S H I P P I N G AVA I L A B L E

1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS

w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.

w Cast aluminum trim

w Dimmable

w ETL approved and Energy Star Certified

w Type IC Rated – Approved for direct contact with insulation

w Air-tight and damp location approved

w Fast and easy to install in limited space locations

w External driver factory mounted inside connection box - 120V

w New construction rough-in plates and jumper cables available

w Available Temperatures (3000K, 3500K and 4000K)

w 50,000 Hours Life; 5 Year Warranty

TECHNICAL SPECIFICATIONS

w WATTAGES: 5W

w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)

w CRI: 90+

w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)

w ADJUSTABLE: 30º tilt and 360º rotation

CERTIFICATIONS• ETL listed• ENERGY STAR

INSTALLATION

• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".

360DIMENSION

INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS

120 60Hz <20% >0.98 5W(+/-5%) 360L

12-7/8”

2-3/4”

1-3/4”

2”

TYPE LUMEN CCT CRI FINISH ACCESSORIES

RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K

90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F

EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH

RL-ACC-SLIM-1-10F10-ft long extension

RL-ACC-SLIM-1-20F20-ft long extension

2

INC

H

LE

D

RE

TR

OF

IT

MO

DU

LE

RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR

2-1/2”

1-5/8”

RL-ACC-SLIM-4-ROUGHPLATEMounting plate for use with 4” downlights

15-1/8” 13-1/8”

3-7/8”

3-3/4”

7-3/4”

6” Opening 5” Opening 4” Opening

RL-UNV-4/5/6For use with: 4”, 5”, 6”

Universal mounting plate with collar

Page 3: ADJUSTABILITY · 2020-06-24 · • The LED slim disk is IC-Rated and Air-Tight ready and may be in direct contact with insulation. • Can be installed in applications with plenum

RL473-700L-DIMTR-120-30K-40K-50K-90-WH TEST NO.: EL103019126INPUT WATTS: 8.91823 LUMENS: 741 CRI: 90 EFFICACY: 83 CCT: 30/40/50K SPACING CRITERIA: 0.42

Candle Power Distribution (Candelas)

RC - Ceiling Cavity Reflectance RW - Wall Reflectance

ROOM

CAV

ITY

RATI

O

Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20

Zonal Lumens Summary

0Candela TabulationLumens Per Zone

Zone Lumens

0-10 229.5610-20 288.0520-30 109.4930-40 48.3340-50 28.6350-60 20.4660-70 12.1270-80 3.2980-90 0.01

Luminance (Average candela/M2)

Anglein Degrees

Average0º

Average45º

Average90º

45 18023 17858 1831855 13899 13798 1400165 10108 10408 1065975 3968 4563 509285 39 39 39

0 3180.705 2655.5015 1058.7725 226.8935 77.4745 37.2355 23.2965 12.4875 3.0085 0.0190 0.01

RC 80% 70% 50% 30% 10% 0%

RW 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%

0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 102 102 102 1001 114 112 110 108 112 110 108 106 106 104 103 102 101 100 99 98 97 952 110 106 102 99 108 104 101 98 101 98 96 98 96 94 95 93 92 903 105 100 96 92 104 99 95 92 96 93 90 94 91 89 92 89 88 864 101 95 91 87 100 94 90 87 92 88 86 90 87 85 88 86 84 825 98 91 86 83 96 90 86 82 88 85 82 87 84 81 85 83 80 796 94 87 82 79 93 86 82 79 85 81 78 84 80 78 83 80 77 767 91 84 79 76 90 83 79 76 82 78 75 81 77 75 80 77 74 738 88 81 76 73 87 80 76 73 79 75 72 78 75 72 78 74 72 719 86 78 73 70 85 78 73 70 77 73 70 76 72 70 75 72 70 68

10 83 76 71 68 82 75 71 68 74 71 68 74 70 68 73 70 67 66

Zone Lumens %Lamp %Fixt

0-20 517.61 69.90 69.900-30 627.11 84.70 84.700-40 675.43 91.20 91.200-60 724.52 97.80 97.800-80 739.93 99.90 99.900-90 739.94 99.90 99.90

799

1599

2398

3198

90º

80º

70º

60º

50º

40º

30º 20º

10º

Cone of Light

BEAM DIA. MEASURED AT 50% OF NADIR F.C.

(FT.)Distance to Plane

(FC.) Initial Footcandle at

Nadir(FT.) Beam

Vert. Spread(FT.) Beam

Horiz. Spread

2 1,101 0.7 0.7

4 292 1.4 1.4

6 127 2.0 2.1

8 70.9 2.7 2.8

10 46.2 3.4 3.4

12 31.8 4.1 4.1

Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m

4”4 Inch Resseced Gimbal with OpticRL473