adicos hotspot - datenblatt · pdf file applications characteristics adicos hotspot-x22 are...
TRANSCRIPT
www.adicos.com
Applications
Characteristics
ADICOS HOTSPOT-X22 are thermographic detectors of the Advanced Discovery System („ADICOS“), which was specifically created to provide reliable early fire detection in industrial surroundings.
HOTSPOTs are parametrizable compact Infrared camera systems with integrated signal processing and evaluation. Their sturdy design protects them against surrounding dust and humidity, which enables them to operate in rough industrial surroundings, especially dust-explosive atmospheres with -classification 22. Typical applica-tions for HOTSPOT-X22 are for example the detection of overheating drives or bearings of conveyor systems and the monitoring of spontaneously inflammable bulk ma-terials on conveyor belts or in storage facilities.
Power-supply and data communication for the detec-tors in the system are provided over the ADICOS M-Bus. A simple wiring concept with prewired ADICOS system cables and specially designed connection boxes keeps installation simple and fast. A service PC with the ADICOS Manager connected to an ADICOS M-Busmaster or the ADICOS fire alarm panel BMZ-30 can address each de-tector individually for advanced data-logging and para-metrization features. In this way alarm thresholds can be adapted perfectly to the atmosphere around the specific detector. Displaying and analysing temperature curves is also a key feature of the software.
Open or enclosed belt conveyors for dust-explosive bulk materials
Storage facilities and bunkers for spontaneously inflammable materials with -classification 22
Drives, shredders, dryers, coolers, chutes and funnels with -classification 22
Silos and mills with -classification 22
Sturdy design with aluminium diecast housing Extensive tolerance towards humidity and dust Detection of smoldering nests Fast reaction time Adjustable alarm thresholds for each pixel Detection not effected by airflow Fast and easy installation due to pre-wired cable
for power-supply and data-signals Zentrale Datenerfassung und Visualisierung über
PC-Software Central data archiving and visualization with
service PC Interface-modules for common fire alarm systems
such as BOSCH LSN and SIEMENS SIGMASYS Suitable for process monitoring
HOTSPOT-X22
HOTSPOT-X22Industrial-suited parametrizable Infrared heat detectors with integrated signal evaluation for ATEX-Zone 22
425-2410-003 EN2.0 - 07/2015 | Page 1 / 4
GTE Industrieelektronik GmbHHelmholtzstr. 21, 38-40 | D-41747 Viersen, GERMANY | +49(0)2162 / 3703-0 | [email protected] | www.adicos.com
Technical changes reserved! 425-2410-003 EN2.0 - 07/2015 | Page 2 / 4
HOTSPOT-X22 - Specifikation
92,5
37
100
14
40
20,5
62,5
100
42 23,5
36,5
Electrical characteristicsSupply voltage 24 ... 40 V DC (Error-status at 20 V or less)Power consumption (without internal heating) 1 VAPower consumption (with internal heating) 10 VAInternal fusing 2 x 375 mAM-Bus max. line length ≈ 2 kmM-Bus max. line capacity ≈ 200 nFM-Bus baudrate 4800 baudLimit contact alarm relay 680 Ω , 20 mA max. (Alarm N/O relay)Limit contact error relay 0 Ω , 40 V / 20 mA max. (Error N/C relay)
All dimensions in mm.
Mechanical dimensions
Thermal characteristicsRelative humidity 0 ... 99 % (non-condensing) In case of continual condensation, use internal heatingTemperature range -10 ... +50 °C
Mechanical characteristicsEnclosure Coated aluminium diecast (corrosion-resistant)Weight 0,6 kg (without connection cable)Protection class IP 64
Connection cable Ø11 prewired
GTE Industrieelektronik GmbHHelmholtzstr. 21, 38-40 | D-41747 Viersen, GERMANY | +49(0)2162 / 3703-0 | [email protected] | www.adicos.com
Technical changes reserved! 425-2410-003 EN2.0 - 07/2015 | Page 3 / 4
LEGEND:NT : External power supplyExt. Modul e : Connection-module for FDnet or LSNiBMA : Non-ADICOS fire alarm panel (e.g. BOSCH, SIEMENS)BMZ30 / M-BM : ADICOS fire alarm panel BMZ30 oder ADICOS M-Busmaster AN/XF NT / USV : External power supply / uninterruptible power supply
Electrical connection
ADICOS topology concept
HOTSPOT-X22 - Specifications
Cable occupation HOTSPOT
Color Signalred Supply voltage
24 ... 40 V DC (non-polar)blackred/blue
M-Bus (non-polar)pink/greygrey FDnet (+)
LSN a outPMA in/out a
0 ... 5 V0 ... 10 VPre-alarm N/O
violet FDnet-B (–)LSN b2 outWS out b
0 V0 VPre-alarm C
blue FDnet (+)LSN a in PMA in/out a
4 ... 20 mA
pink FDnet-A (–)LSN b1 inPMA in b
4 ... 20 mA
Pre-alarm N/Cyellow Relay output X6 e - Alarm N/Owhite Relay output X6 a - Alarm N/Obrown Relay output X7 a - Error N/Cgreen Relay output X7 e - Error N/C
ADICOS-Detectors
ADICOS M-BUS
External power-supplyADICOS
ADICOS-AAB
ADICOS Service-PC
Further detectors
BMZ-30 ADICOS NT V40-A3(optional)
Detector characteristicsSensor resolution 32 x 31 pixelsOptical angle 53° x 52° (90° x 90° on request)Reaction time 1 sTemporal resolution 0,1 s or 1 s (depends on configuration)
+24
V
0 V
M-B
us A
M-B
us B
B1 A1 B2 A2 X6e
X7e
X6a
X7a
0 V
+24 V
PE
PE
+24 V
0 V
X7 (St)
X6aus (Al)
X6ein (Al)
LOOP B
LOOP A
M-Bus A
M-Bus B
+24 V
0 V
X7 (St)
X6aus (Al)
X6ein (Al)
LOOP B
LOOP A
M-Bus A
M-Bus B
CONNECTION BOX
HOTSPOT-X22
Alarm relay Error relay
R1 R2
StandardR1 = 680 Ω R2 = ∞
StandardR3 = 0 Ω R4 = ∞
R3 R4
NT
FAS
BMZ30 / M-BM
Ext. Module
NT / USV
BMZ-Module
GTE Industrieelektronik GmbHHelmholtzstr. 21, 38-40 | D-41747 Viersen, GERMANY | +49(0)2162 / 3703-0 | [email protected] | www.adicos.com
Technical changes reserved! 425-2410-003 EN2.0 - 07/2015 | Page 4 / 4
HOTSPOT-X22 - ApplicationPlanning notes for ADICOS-Detectors
ATTENTION!Planning of fire detection system for industrial surroundings requires special expertise.Placement and alignment of ADICOS-Detectors has to be done by specialist planners!
Application example
HOTSPOT mounting bracket with ball joint
HOTSPOT-X22 with purge-air connection and HOTSPOT mounting bracket with ball joint for monitoring of a chute next to a conveyor belt
E
D
C
B
AA
B
C
D
E
1 2 3 4
GTE Industrieelektronik GmbHHelmholtzstr. 2141747 ViersenTel.: 02162-3703-27
max
50
Projekt: ADICOS HOTSPOT 256/1000
Dateityp:ASSEM
Dateiname der Zeichnung: HOTSPOT-256-1000_PURGE_MBRACKET
TolerierungISO 8015
Allg. ToleranzDIN ISO 2768 m-K
OberflaecheDIN ISO 1302
Werkst.-KantenDIN ISO 13715
Maßstab 1:2 / 3:10 Gew.: kgWerkstoff: Halbzeug:
Datum Name Benennung: HOTSPOT 256/100 with purge-air connectionmounted on HOSPOT mounting bracket with ball joint
Bear. 20.04.2015 C. Pfeiffer Gepr. Norm
Zeichnungsnummer:
410-2001-031...033Blatt1
5 Bl.Kür. Änderung Datum Ver. (Urspr.) (Ers.f.:) (Ers.d.:)
Release toadjust tilt
410-2003-019purge-air connection
410-2003-018Mounting bracket with ball joint
E
D
C
B
AA
B
C
D
E
1 2 3 4
GTE Industrieelektronik GmbHHelmholtzstr. 2141747 ViersenTel.: 02162-3703-27
105
76
102
150
8,5
Projekt: ADICOS HOTSPOT 256/1000
Dateityp:ASSEM
Dateiname der Zeichnung: HOTSPOT-256-1000_PURGE_MBRACKET
TolerierungISO 8015
Allg. ToleranzDIN ISO 2768 m-K
OberflaecheDIN ISO 1302
Werkst.-KantenDIN ISO 13715
Maßstab 7:10 Gew.: kgWerkstoff: Halbzeug:
Datum Name Benennung: HOTSPOT 256/100 with purge-air connectionmounted on HOSPOT mounting bracket with ball joint
Bear. 20.04.2015 C. Pfeiffer Gepr. Norm
Zeichnungsnummer:
410-2001-031...033Blatt4
5 Bl.Kür. Änderung Datum Ver. (Urspr.) (Ers.f.:) (Ers.d.:)