addmi 05-windows slave-installation_and_management
TRANSCRIPT
© 2009 BMC Educational Services
Windows Slave Installation
© 2010 BMC Educational Services
Slave Installation Steps
1. Download the slave installer
2. Run the installer
3. Edit the firewall
4. Add the slave details to the UI
5. Check that the slave service has started
6. Check the setup in the UI
© 2010 BMC Educational Services
Step 1: Download the Installer
Discovery > Credentials > Slave Management Choose the installer to download The installer is pre-configured to work with the appliance it is
downloaded from
© 2010 BMC Educational Services
Step 2: Run the Installer
Uninstall existing slave software using the uninstaller Run the installer as a local administrator
© 2010 BMC Educational Services
Step 3: Edit the Firewall
Now check the slave’s firewall (if needed) Click on Start-> Settings-> Control Panel-> Windows Firewall Click on the “Exception” tab
Click on the “Add Port” button and add port number for the slave type Click ok and ok when finished
© 2010 BMC Educational Services
Step 4: Add the Slave Details to the UI (1)
Discovery > Credentials > Slave Management Click on the appropriate “Add x Slave” button
© 2010 BMC Educational Services
Step 4: Add the Slave Details to the UI (2)
For a Credential Slave Provide a name and the Slave Host IP address Take the default port and click “Apply”
© 2010 BMC Educational Services
Step 4: Add the Slave Details to the UI (3)
For a Workgroup Slave Provide a name and the Slave Host IP address Take the default port and click “Apply”
© 2010 BMC Educational Services
Step 4: Add the Slave Details to the UI (4)
For an Active Directory Slave Provide a name and the Slave Host IP address Provide the domain Take the default port and click “Apply”
© 2010 BMC Educational Services
Step 5: Check the Service
For an AD Slave: Check the service is running with the AD credentials required
Start the service
© 2010 BMC Educational Services
Step 6: Check the Setup in the UI
Discovery > Credentials > Slave Management Check the “Status” is “Active” “Ping” option in Action drop down forces a reconnection test
© 2009 BMC Educational Services
Slave Management in the UI
© 2010 BMC Educational Services
Discovery > Credentials > Slave Management “Delete” option in Action drop down Confirm warning
Removing Slaves
© 2010 BMC Educational Services
Discovery > Credentials > Slave Management “Manage” option in Action drop down
Toggle enabled as needed and click “Apply”
Disabling Slaves
© 2010 BMC Educational Services
Manage Configuration and Log Files
© 2010 BMC Educational Services
Online Documentation: http://www.tideway.com/confluence/display/81/Windows+Discovery
Tideway Foundation
Version 7.2
Documentation
Title
Further Resources
© 2009 BMC Educational Services
Window Slave Install Exercises