1

In this additional epistle we will prove that the black spot covering the neck vertebras C2 and

C3 is caused by foreign body material attached around (, causing the distortion occurring).

This document is not treating the medical fraud committed to obstruct the investigation after.

Original series of axial coups of the neck part of the column vertebral with that distortion.

Print-screen of the axial series of scans (MRI 2007) of the neck going upwards till the jaw.

The series coups start below at the shoulders and go slowly upwards to the lower jaw. Starting

at coup 13 we can see a distortion arising which is covering the complete vertebral and is

increasing gradually. At coup 17 and coup 23 the distortion is at its strongest and fits with the

distortions at the height of C3 and C2 shown at various sagittal MRI coups of neck-vertebras.

The distortion (black spot) covers the complete vertebral, by

metal being present which is apparently attached around.

If there only would be a metal object present in the backside

of the neck (away from the vertebral), then there was just a

local image of distortion in the backside of the neck, and not

such a significant distortion covering the complete cross

section of that vertebral. In the forgoing epistles Medical

Research Part B and C (Image Fraud investigation) we go

deeper into the scan material; this writing is only meant to

point out some more about the black spot as seen here on

the image to the left indeed caused by metal containing

(foreign body) parts being in a position around the vertebral.

Other Indications for the metal parts being attached around the column vertebral were:

Metal traces seen from behind and aside (L). Blood traces seen aside and a scar from behind.

2

Underneath a selection from radiology theory-books about X-Ray and MRI is shown to

compare among each other with the forgoing material, to make clear we are dealing with

foreign body material being of a metal kind sustaining, but also that this indeed is attached

around the vertebras C2 and C3 as forgoing reports of in research show in abridged version.

First of all should be mentioned that specially in MRI scanning the principle is showing

images because of Magnetic resonance of the body-parts containing ionic water which is

capable of conducting electricity, and seen a change of magnetic field is creating very small

currents, resulting by local interference into small fluctuations of the magnetic field, which

are noticed by the scanner emitting strong magnetic fields just before. Foreign body material

will show different pixel setting in material then body tissue. In a way visually this also

counts for X-ray scanning by the way radiance is obstructed to reach the film.

(Selection from theory books about radiology.) We see the contour shapes of a metal key.

Metal blocks radiation and films do not get exposed by this on that spot. Air on the contrary

lets go through radiation the most and exposes the film the most resulting in a dark surface.

A good quality of film can

improve the precision of

diagnosis. A film should not be

under-, or over-exposed. In the

example here next for instance

are the five radiologic densities

shown (RX-negative) under a

correct situation of exposure

and rendering.

The five radiological densities

in order of increasing

brightness:

1. Air

2. Fat

3. Fluid

4. Bone

5. Metal

Effect of enlargement.

Bullets with a caliber .32 and .38

were placed on several places of a

body, where after an x-ray photo

was made with this test-setup.

Because of the difference of

distance between the objects to

the film a difference in size arose

(as an enlargement) of the bullets.

Hear the bullets look more or less

as if they have the same size.

3

On the next page RX and MRI images will be shown of a patient (carrying a dental work in

her mouth) in anonymous mode. First axial CT scans will be shown of a patient’s mount

carrying a dental work so we can see the similarity in appearance. Then we will show the

MRI images that were made after notably with the same scanner as the axial MRI scan of the

neck vertebras at first on page one covering the vertebras C2 and C3. We will see that because

the metal parts are in half a circle the space in between is distorted as well by a black covering

spot, because there the MRI scanner is not able to distinguish image information.

MRI of the spinal column.

In general with medical artefacts seen on scans is meant

appearances by wrong setting of the scanner suggesting

something is there, but in fact is not. The reactions occur

f.i. in overdrive scanning of body-fat or water or motion.

But foreign Objects on the patient’s body or clothing

(jewellery or a zipper etc.) also lead to distortion

artefacts.

Distortion artefacts can also be caused by Ferro-

magnetic objects inside the body. The difference with

the rest of the image showing body-parts is quiet

evident.

The text about

the image to the

right (concerning

the dental work

in Adolf Hitler’s

mouth) is kept

intact. Hitler

Germany did

many medical

experiments

abusing people.

That culture is

also taken over?

4

CT-scan Selection of a patient showing dental works in the mouth; do notice image distortion.

Image distortion of an axial MRI scan of that patient’s mouth with dental work, is also

showing a distortion covering the whole area in between the dental work, because the scanner

can not get through the magnetic field caused by the dental metal parts standing around.

Conclusion: in the image situation of a patient with dental works in her mouth as we can see

on CT scanning, we get the same kind of axial distortion when a MRI scan is being made of it.

ANONYMOUS EDITION, original can be shown in a criminal investigation. Procedure.