instruction leaflet for Freedom bottles

Additional products from Bfree

Please keep this leaflet for repeat use. In this leaflet you will find useful tips and advice on making the best use of your bottle.

Twister brush setWith the easy twist handle, the Twister brush set allows for easy cleaning, scratch free.

Unique bottle brushMade of 2 sponge layers to reach all internal parts, and with the 360° twisting handle, the brush maximizes cleaning power without scratching.

• Before first use wash all parts thoroughly and sterilize in boiling water, a microwave sterilizer or an electric sterilizer.

• Do not use the bottle without the silicone vent.

• When heating liquid in the bottle, remove the collar and nipple. Do not heat a closed, entirely assembled bottle.

• Do not expose the bottle and nipple to open fire.

• Do not leave the bottle and nipple in direct sunlight.

• Before placing the silicone vent in the base, ensure the slit in the vent is open by lightly pressing on it.

• In order to avoid leakage when going out, ensure the cap is closed and the nipple is straight.

Bfree Freedom bottles may only be used with Bfree Freedom nipples. Choosing an appropriate flow rate is individual to each baby. The nipple stage should be chosen according to the type of liquid, baby’s age and growth rate.

A comparative test which examined the performance of the iComfort™ system compared with competing bottles proved that Bfree Freedom bottles were the most effective in reaching the optimal low level of vacuum.

Tested & provenThe iComfort™ system in Bfree Freedom bottles is designed to maintain an optimal low level of vacuum.

The variable flow nipple combines stages 2, 3 and 4 in one nipple. The drop shapes molded on the inside of the nipple determine the flow rate – the rate chosen should be positioned opposite baby’s nose.

• Keep all components out of the reach of children when not in use.

• Always use this product with adult supervision.

• Never use a feeding nipple as a soother or teether.

• Continuous and prolonged sucking of fluids will cause tooth decay. This can happen if your child is allowed to use the bottle for long periods through the day and particularly at night, when saliva is reduced.

• Always check the food temperature before feeding.

• Microwave heating of liquid is not recommended as this can cause hot spots.

Click ‘n Go formula dispenserInstructions for correct use of thebottle

• Use Bfree Freedom nipples only.• Ensure nipple is clean before each use. Before first

use, wash thoroughly and sterilize the nipple and all bottle parts.

• Inspect the nipple before each use and pull in all directions. Throw away the nipple at the first sign of damage or wear and tear (such as from biting).

• Wash nipple thoroughly after each use. Do not use sharp or coarse objects to clean the nipple.

• Store clean nipples in a dry, closed container.• Do not turn nipple inside out.• Do not pierce the nipple or enlarge the hole.• Do not leave nipples in the sterilizer or sterilizing

solution longer than recommended nor in direct sunlight or heat. These conditions may weaken the nipple.

• Latex nipples contain natural rubber latex which can cause allergies.

Instructions for nipple use and care

Nipples

Innovative and ergonomically designed – with easy one handed open/lock and 3 tightly sealed rounded compartments for easy cleaning.

Unique nipple brushDesigned to fit all the way inside the nipple for gentle and effective cleaning.

RLMC100EEE00 10 16

The following WARNINGS are for your child’s safety and health

Choose nipple stage according to typeof liquid, baby's age and growth rate

slow

0+months

1medium

3+months

2fast

6+months

3thick

liquids6+

months

4stage

flowrate

recommendedage

flowrate

recommendedage

thickliquids

6+months

fast

6+months

medium

3+months

variableflow nipple

Dr.B P VA

TT ML M

A0 high

SA

FET

Y TE

STED PVC FREE P

HTH

ALATES FREE

2. Before first use wash all parts in hot soapy water. Then sterilize all parts according to the instructions in number 13. Do not use solvents or abrasive cleaning agents.

5. Make sure the slit in the vent is open before feeding by pressing lightly on the vent tip.

6. Screw the base with the vent onto the bottom of the bottle.

7. Pour the liquid into the bottle and heat to 37°C/98°F.. Mix the formula according to the manufacturer’s instructions.Do not pour boiling liquid into the bottle

9. If you decide to prepare the formula inside the bottle, mix gently in a twisting action. Do not shake the bottle.

10. As an extra precaution, check the temperature of the feed by shaking a few drops onto the back of your hand before feeding.

12. After feeding, disassemble all the parts and wash in hot, soapy water. Do not use solvents or abrasive cleaning agents to wash the bottle and its parts as these may cause damage.

13. After the bottle and all parts have been carefully cleaned, sterilization is recommended in one of the following methods:

• Place parts in a pan of water and wait for water to boil.

• Remove pan from heat.• Allow parts to float in

the pan for 5 minutes without touching the pan sides.

2. Microwave sterilization: wash all parts thoroughly making sure to remove any oily residue and sterilize according to the manufacturer’s instructions. After sterilization, dry all parts ensuring they are separated.

11. Feed your baby by holding him/her in the correct position as shown. Do not leave your baby with the bottle without adult supervision.

8. Pull the nipple through the collar and screw the collar onto the bottle.

When heating the liquid leave the bottle open on the top, without the collar and teat (see illustration).

Microwave heating is not recommended as this can create hot spots which may cause burns. When heating in the microwave mix the liquid well before serving.

3. Make sure hands are clean prior to assembly of any bottle parts.

4. Insert the silicone vent into the base and press into place.

Please follow the steps carefully1. Bottle parts:

cap slit

collar

nipple

silicone vent

base

bottle

1. Sterilization in boiling water: