addendum two (2)...2020/02/08 · 13. office 1027 is being revised to a laundry room with a washer...

\\dsgw-fs01\Projects\2018 Projects\018131.00 Bay Mills Health Center\D - Bidding\4-Addenda\Addendum 2\18131 Addendum 2.docx

of 5

2 West 1st Street, Suite 201, Duluth, Minnesota 55802

tel (218) 727-2626 fax (218) 722-7467

ADDENDUM TWO (2) project Bay Mills Health Center

Brimley, Michigan

project # 018131.00

date August 20, 2020

from Rebecca Lewis DSGW Architects, Inc.

to All planholders for above project

= The following addendum shall become part of the construction documents for the construction of the above referenced project.

This addendum supersedes and supplements all previous reference to similar items.

I hereby certify that this plan, specification, or report was prepared by me or under my direct supervision and that I am duly a Licensed

Architect under the laws of the State of Minnesota.

Signature

=

Registration # 1301056849 Date August 30, 2020

general clarifications 1. Prevailing Wage Rates or Davis Bacon rates are NOT required for this project.

2. This project is Tax Exempt for construction materials purchased for the medical center’s construction.

3. Unrestricted Solicitations. If the solicitation is not restricted to Indian-owned (including Indian management of a company) economic enterprises and organizations, award shall be made to the qualified Indian-owned (including Indian management of a company) economic enterprise or organization with the lowest responsive bid, whose bid is not 5% more than the lowest responsive bid and within the maximum total contract price established for the specific project or activity being solicited. If equal low bids are received from qualified Indian-owned (including Indian management of a company) economic enterprise or organizations, award shall be made by drawing lots or similar random method, unless otherwise provided in Tribal or local law. If no responsive bid by a qualified Indian-owned (including Indian management of a company) economic enterprise or organization is within this range, award shall be made to the lowest responsible, responsive bidder.

4. There are no permits required for this project. No City, State or Tribal permitting.

5. Contract terms: Negotiations will be up to the Owner and the Architect, as long as the USDA RD Guidelines are followed.

7. Sovereign Immunity: There will be a partial waiver of sovereign immunity.

8. Items listed as “By Owner” for appliances, and specialty items will be furnished & installed by Owner.

9. General Contractor is responsible for onsite coordination and equipment vendor is responsible for installation of all medical and dental equipment.

10. Composite Wall Panel: Fiber cement siding.

11. Typical Wall Panel: Engineered wood siding.

12. Curved Roof:

a. Radius is indicated on structural sheets.

b. Nailbase on radius can be bent to conform. Alternate means and methods can be reviewed and approved by Architect at time of constructability review.

c. Vapor barrier is direct to deck.


of 5

d. The 3” XPS on the vertical surface can be switched to a standard Poly ISO.

e. The membranes needs to be returned under the ice and water on vertical surface.

13. Office 1027 is being REVISED to a Laundry Room with a washer and dryer. There will be 2 washer hook-ups and 2 power locations for washer & dryer. Washers on the east wall, dryers on the west wall.

14. Pan 1025 door is to be WD-D5.

specifications SECTION DESCRIPTION

00 01 10 TABLE OF CONTENTS 1. ADD the following document to Division 00, following section 00 31 00, above 00

41 00: ------------ Radiation Shielding E

------------ Procurement Policy 2. ADD the following section to Division 00, after Bid Bond:

------------ AIA Document A305 – Contractor’s Qualification Statement 3. ADD the following sections to Division 08, in numerical order:

08 33 26 – Overhead Coiling Grilles 08 36 13 – Sectional Doors

4. OMIT the following section from Division 09: 09 72 00 – Wall Coverings

5. ADD the following Division 13: DIVISION 13 – SPECIAL CONSTRUCTION 13 09 00 – Lead Lined Materials

00 11 13 ADVERTISEMENT FOR BIDS

1. CLARIFICATION: Hard copy bids are to be postmarked August 25, 2020 to the address listed in this specification section, with electronics bids being sent to: Email address TBD (will be issued in Addendum 3, Friday, August 21, 2020) By 1:00 p.m. CST on August 25, 2020.

2. CLARIFICATION: Bids are due at 1:00 p.m. CST and will be publicly opened via a zoom conference call, as per Addendum #1, at 1:00 p.m. CST. It may be a few minutes later.

00 31 00 AVAILABLE PROJECT INFORMATION

1. 1.01: CLARIFICATION: General Contractor is to bid the project as though they will be doing all of the work themselves. If the Owner has the time and laborers to do some of the work themselves, the Owner reserves the right to negotiate that out of the project at that time.

2. 1.04.G: CLARIFICATION: REVISE to read: Bids due printed copies only. 3. 1.05: ADD the following after:

1.06 RADIATION SHIELDING EVALUATION A. Radiation shielding evaluation for the Bay Mills Health Center by Radiation

Physics Consultants, Inc., dated November 27, 2019; appended to this section.

1.07 PROCUREMENT POLICY A. Procurement Policy of Bay Mills Indian Community, Government Grants

and Contracts, adopted August 13, 2018; appended to this section.

---------- RADIATION SHIELDING EVALUATION 1. ADD this document as noted above and included with this addendum.

--------- PROCUREMENT POLICY 1. ADD this document as noted above and included with this addendum.


of 5

--------- CONTRACTOR’S QUALIFICATION STATEMENT

1. ADD AIA Document A305 – 1986, Contractor’s Qualification Statement as included with this addendum.

2. CLARIFICATION: The Owner has requested that the General Contractor’s submitting a bid also complete and submit this AIA Document A305 document.

01 10 00 SUMMARY

1. 1.06.F.6: OMIT all sub-items. No permits are required for this project.

01 40 00 QUALITY REQUIREMENTS 1. CLARIFICATION: Owner is responsible for structural testing per structural sheet

notes only. General Contractor is responsible for all other 3rd party testing:

07 46 46 FIBER CEMENT SIDING 1. 2.02.E: OMIT and REPLACE with “Four custom colors from selected by

Architect.”

08 33 26 OVERHEAD COILING GRILLES 1. ADD this section in its entirety as included with this addendum. 2. CLARIFICATION: Contractor to provide pricing to furnish & install two coiling

counter doors to be power operated switching, location to be determined in the field.

08 36 13 SECTIONAL DOORS

1. ADD this section in its entirety as included with this addendum. 2. CLARIFICATION: Contractor to provide pricing to furnish & install two overhead

coiling doors to be power operated switching, location to be determined in the field.

08 42 29 AUTOMATIC ENTRANCE DOORS

1. 2.01: OMIT in its entirety and replace with the following: 2.01 Manufacturers

A. Sliding Automatic Entrance Door Assemblies: Basis of Design is the AD System: 1. ASSA ABLOY Entrance Solutions; Besam SL500: www.besam-

usa.com 2. Horton Automatics: www.hortondoors.com 3. NABCO Entrances Inc; GT 1175 Whisper Slider:

www.nabcoentrances.com 4. Portable USA; Diva Series: www.portalpusa.com 5. record-usa; 5100 series: www.record-usa.com 6. Substitutions: See Section 01 60 00 – Product Requirements.

08 43 13 ALUMINUM-FRAMED STOREFRONTS 1. 2.01.A.1: OMIT and REPLACE with Kawneer North America Insulclad 500T

thermal entrance. 2. 2.03.A.3: ADD the following after:

4. For systems that are applicable to 2”x6” manufacturers to provide acceptable full thermal framing 2”x6” systems.

3. 2.03.C: OMIT entirely. There are no sunshades on this project.

08 83 00 MIRRORS 1. 1.01.A: ADD the following after:

B. Mirrored eye-glass display.


of 5

2. 2.01.B: ADD the following after: C. Mirrored Eye Glass Display: Standard wall mount swivel mirror to

accommodate open wall mount optical acrylic display to make up a system as shown on drawings. 1. Manufacturers:

a. www.framedisplays.com: DW31-90F Open Wall Mount Acrylic Optical Display with Hardware 47.5” (H) or approved equal.

b. www.framedisplays.com: 15-88-12-20 Standard Wall Mount Swivel Mirrors 55” long, or approved equal.

3. 2.02.A: OMIT “Plastic rosettes” and REPLACE with “Metal Stand-Offs”.

09 72 00 WALL COVERINGS 1. OMIT this section in its entirety.

10 56 26 MOBILE STORAGE SHELVING 1. 2.01.A: ADD the following sentence: Basis of Design Spacesaver single fixed

with 3 back to back carrels, single side operation, manual crank with slab set tracks. Total unit height is 7’, there should be 3 banks to a row, full cap.

13 09 00 LEAD LINED MATERIALS

1. ADD this section in its entirety as included with this addendum.

32 31 16 CHAIN LINK FENCES AND GATES 1. CLARIFICATION: Anchored posts into concrete slab, enclosure to be vinyl

coated with privacy slats. 2. 1.01.C: ADD the following after:

D. Decorative Fence as shown on landscape drawing. 3. 2.01.A: ADD the following after:

B. Decorative Fences: Basis of Design TREX Seclusions. 4. 2.02.B: ADD the following after:

C. Composite board on board privacy fence 6’x8’.

drawings SHEET DESCRIPTION

A2.1 FLOOR PLAN – SOUTH 1. 1/A2.1:

a. OMIT HM-W2 tags at wood windows. CLARIFICATION: See provided Elevations 2 & 3/A7.6, and Detail 21/A7.1 for details.

b. ADD plan note 2 at Rooms 1102 & 1104, as noted in Room Finish Schedule.

A2.2 FLOOR PLAN – NORTH 1. 1/A2.2: OMIT HM-W2 tags at wood windows. CLARIFICATION: See provided

Elevations 2 & 3/A7.6, and Detail 21/A7.1 for details.

A4.1 ROOM FINISH SCHEDULES 1. Room Finish Schedule: REVISE finishes for toilet 1103 to correspond with

finishes shown on Interior Elevations.

A7.3 ENLARGED PLANS & INTERIOR ELEVATIONS - CLINICAL 1. 10, 21 & 22/A7.3: CLARIFICATION: The modular casework system noted in the

exam rooms is not part of this project. It will be done by the Owner outside of this project.

A7.4 ENLARGED PLANS & INTERIOR ELEVATIONS – LAB/OPTICAL

1. 25, 26 & 27/A7.4: OMIT note “Acrylic wall panel mirror 19.5”x55”, and REPLACE with “Standard Wall Mount Swivel Mirror”.


of 5

A7.6 ENLARGED PLANS & INTERIOR ELEVATIONS - REGISTRATION 1. 1/A7.6: ADD elevation marker. 2. 22/A7.6: ADD interior elevation.

Approvals The following manufacturers of materials and equipment are approved for the incorporation into this project based on the information submitted to the Architect/Engineer. The cost of any modifications required to make the materials comply with the Specifications shall be borne by the Contractor/Supplier. Any extra cost of other trades as a result of any of the substituted material shall be borne by the Trade Contractor of material suppliers making these substitutions. The approved substitute materials are subject to final specific submittal review by the Owner or Architect/Engineer

Section Description Approved

08 11 13 HM Doors & Frames Curries

08 42 29 Automatic Entrance Doors Stanley DuraGlide 3000 Series Stanley Magic Force Stanley Dura-Care 7200 Series

10 11 00 Visual Display Boards ASI Visual Display Products

10 21 13.19 Solid Plastic Toilet Compartments ASI Accurate Partitions

10 26 13 Corner Guards Korogard Rub Strips & Corner Guards

10 51 00 Lockers ASI Storage Solutions

10 56 26 Mobile Storage Shelving Spacefile International Corp.

=

ãÉÅÜ~åáÅ~ä==

Åçåëìäí~åí=

EDI-Dolejs, Inc.’s Addendum Two, dated August 20, 2020 is to be included with this addendum as attached (22 page)

=

enclosures J Radiation Shielding Evaluation (18 pages) J Procurement Policy (19 pages) J AIA Document A305 – Contractor’s Qualification Statement (4 pages) J Spec. Section 08 33 26 – Overhead Coiling Grilles (3 pages) J Spec. Section 08 36 13 – Sectional Doors (4 pages) J Spec. Section 13 09 00 – Lead Lined Materials (2 pages) J Architectural Drawing Sheet A2.1, A2.2, A4.1, A7.3, A7.4 and A7.6 (30x42)(6 pages) J EDI-Dolejs Addendum 2 (14 – 8.5x11; 8 – 30x42) (14 pages)

= This addendum shall become part of this bid. The bidder shall insert the addendum number in the space where indicated on the proposal form. Failure to comply may result in the bid being rejected.

= END OF ADDENDUM TWO (2)

Audrey Breakie

Health and Human Service Director

Bay Mills Health Center

Dear Audrey,

We have completed the radiation shielding evaluation for the following facility and equipment.

Facility: Bay Mills Health Center12455 W. Lakeshore Drive

Brimley, MI 49715

This evaluation includes the following equipment:

Radiographic - Room #1039

Mammography Tomosynthesis - Room #1038

Important: This Shielding Evaluation Report MUST remain permanently onsite with the exam room(s)

listed. If the facility is sold, a copy of the report MUST remain with the facility.

Note: On page 4 begins the Shielding Calculations and Information portion of this report that includes a list

(Table of Contents) of each exam room / x-ray unit and the order that they appear in the report. This section

includes a Summary Page for each room followed by at least 1 page of Shielding Calculations and

Information/Reference data. Please refer to each Summary Page for specific shielding Required materials

for each wall/barrier and our (RPC) Recommendations (as we may recommend more shielding materials than

technically required).

This evaluation was conducted using the guidelines in the National Council on Radiation Protection and

Measurement's (NCRP) report 147 entitled "Structural Shielding Design for Medical X‑Ray Imaging Facilities"

and Michigan State X-Ray Regulations. We used room drawings provided to us for the room layout and

equipment location in the room (when available and/or necessary). Any attached room drawings must

accompany all copies of this report.

Refer to the Shielding Calculations and Information section of this report for specific shielding

Requirements and Recommendations for each exam room / radiology unit.

Each exam room has a Summary Page indicating what is Minimally Required and our Recommendations.

Each room also has Shielding Calculations & Information page(s) with details specific to that evaluation.

November 27, 2019

RADIATION PROTECTION

SHIELDING SPECIFICATION

EQUIPMENT SPECIFICATION

ACCEPTANCE TESTING

QUALITY CONTROL

RPC502 East 2nd Street • Radiation Physics • Duluth, MN 55805

RADIATIONPHYSICSCONSULTANTS, INC.

AMOS TARFA, B.S.

Quality Control Specialist

MNSP2134612-616-9899

[email protected]

STEVEN T. NICHOLAS, M.S.

Medical Physicist

ABMP CertifiedMNSP0091

218-786-1025

[email protected]

JEREMY A. HULTEEN, B.A.


MNSP0089218-786-1028

[email protected]

DAVID J. EASTMAN, M.E.H.S.

Medical Health Physicist

MNSP0088218-786-1026

[email protected]

SHANE MCCOTTER, B.S.


MNSP2416218-786-1027

[email protected]

Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Page 1

GENERAL NOTES

Shielding of the room shall be constructed so that the protection is not impaired by joints, openings for

ducts, and pipes passing through barriers, conduits, services boxes, etc. embedded in the barriers. The

joints between lead sheets should be constructed so that their surfaces are in contact with an overlap of

not less than ½ inch. Openings in protective barriers from doors, windows, ventilation ducts, and

conduits may require radiation baffles to ensure the required degree of overall protection is maintained.

Windows or doors in any barrier shall meet the shielding requirements for that barrier. Shielding

above 7 feet from the finished floor is not necessary because the height of the x ray sources and of most

individuals is less than 7 feet. Openings in the walls above 7 feet generally will not require radiation

baffles. However, extending shielding to at least 8 feet around any film darkrooms (if the facility has

darkrooms) is recommended because film is regularly stored on shelves above 7 feet.

The shielding specifications presented in this report are based on the equipment assumptions stated

above and the attached copies floor plans (if necessary) showing the location of the equipment in the

room. Any modifications in the equipment, patient workload, occupancy/use of surrounding areas

or room layout (including the location of the equipment in the room) may invalidate this report.

Operator's Booth Requirements (MN Rules 4732.0355 Subpart 4.A-C.):

- It must be allotted no less than 7.5 square feet of unobstructed floor space (the console and generator

may not occupy this space).

- It may be in any geometric configuration provided no dimension is less than 2 feet.

- The booth walls must be permanently fixed barriers at least 7 feet high.

- The booth walls must not be used as a primary radiation barrier. The x-ray beam cannot be directed

at the control booth.

o The control booth operator may not be in the direct path of any scatter radiation from the patient,

x-ray tube, table or wall bucky.

Exposure Button Requirements (MN Rules 4732.0355 Subpart 4.D.):

- The button must be at least 39 inches from any open edge of the control booth wall that leads into the

exam room.

- The button must be fixed (attached so it cannot be moved) within the control booth.

- The button must be placed to allow the operator to use the viewing window or other viewing device

from within the booth.

Viewing Window Requirements (MN Rules 4732.0355 Subpart 4.E.):

- The operator must be able to view the patient during any exposure.

- The operator must have full view of any occupant in the room.

- The operator must be able to view any entry into the room.

- The window must have the same lead equivalence as the surrounding barrier.

- The minimum viewing area must be at least 350 square inches and must be constructed to

assure x-ray operators an unobstructed view of the patient and all room entrances.

- The operator must be able to use the full viewing window (no obstructions).

- The window must be oriented so that the operator's viewing position is at least 18 inches

from the edge of the booth.


Sincerely,

Radiation Quality Control Specialist

(218) 786-1027

[email protected]

Occupancy Rates:

The following guidelines were used to assign a percentage factor of how often a person occupies the

rooms/areas beyond each barrier (assumes a standard 8 hour shift):

- 1.0 (Full Occupancy or continuously occupied) = control booth, offices, laboratories, adjacent x-ray

rooms, reading/viewing rooms, darkroom, receptionist areas, attended waiting rooms, nurse stations

- 1/2 (0.5) = exam rooms, treatment rooms

- 1/5 (0.2) = corridors, patient rooms, employee lounges, staff restrooms

- 1/20 (0.05) = public restrooms, changing rooms, unattended waiting rooms, unattended vending areas,

storage rooms, outdoor areas with seating, patient holding areas

- 1/40 (0.025) = outdoor areas with only transient pedestrian or vehicular traffic, unattended parking,

attics, stairways, unattended elevators, janitor’s closets, mechanical/boiler rooms

Thank you for allowing us to assist your organization with your radiation shielding needs. Please contact us

if you have any questions on the shielding results. If RPC can help you with any physics services in the

future, such as acceptance testing of your new radiology equipment, please do not hesitate to contact us.

Shane McCotter, B.S.

Weekly Dose Limits:

The areas beyond all barriers, except as described below, are considered "uncontrolled areas" (allowing

public occupants) where the weekly dose limit is 0.02 mSv (2 mrem/wk). The control booth/console and

similar areas where public access is prevented/limited are considered "controlled areas" where the Radiology

Workers are allowed a weekly dose limit of 0.1 mSv (10 mrem/wk).

All occupancy rates and weekly dose limits were assigned using these guidelines and adhere to all Federal

Regulations (10 CFR Part 20.1201 and 1301) and Michigan State Rules - LARA Rules 325.5203.

Post-Construction Shielding Inspection:

The facility must document an inspection of all shielding materials (such as Lead) installed to assure the

room was properly built/shielded. Have the facility manager, architect, contractor or construction crew

perform an inspection using the Post-Construction Shielding Inspection Form included in the Appendix. We

recommend the Contractor perform and sign off on the Inspection form verifying they built the room

properly. Physics (RPC) staff may do an inspection at additional cost (which may require multiple trips).

Shielding Placard:

Included in the Appendix is a blank Shielding Placard (sign) to be filled out and POSTED in the exam

room. The placard must indicate the ACTUAL amount/type of shielding materials physically built

into all barriers of the exam room (walls, windows, doors ceiling and floor). As contractors often install

more/thicker shielding materials than necessary (indicated as Required or Recommended in this report),

verify the placard material information with the contractor and/or architect (such as from Post-Construction

Inspection).

- Minnesota regulations REQUIRE a Shielding Placard to be posted in the room (physically and

permanently attached to the wall) for all new radiology room construction, modification or

installations (MN Rules 4732.0360 Subpart 7).

- Though other states do NOT require a shielding placard be posted, we strongly recommend posting a

placard to help assure that the actual building materials/thicknesses information is not lost (and

helps with any future room changes requiring a new shielding evaluation).


Shielding Calculations & Information Section

Radiology Room Shielding Evaluation Report


Brimley, MI 49715

November 27, 2019

Within this Shielding Calculations & Information Section are specific pages

for each exam room/radiology unit in this report. Each room independently

has a Required/Recommended page followed by a Calculations/Information

page. State regulations require these pages to be included with any copy of

this report (whether printed or digital) AND a copy of this report MUST

remain physically with the building (even if the building is sold).

Exam Rooms/Equipment Included in this Report




Summary Page: Radiographic - Room #1039

Table: 95 mA*min/week = (50 patients/week) X (1.9 mA*min/patient)

Wall: 30 mA*min/week = (50 patients/week) X (0.6 mA*min/patient)

Barrier Required Shielding *Recommended

Direction & (Description) Materials / Thickness Shielding Materials Remarks

See Note

A

See Note

A

See Note

A & B

See Note

A

See Note

A & B

See Note

A & C

See Note

A & C

*Though some barriers would suffice with installing thinner amounts of Lead shielding, we

recommend shielding all barriers with a standard 1/16 Inch of Lead to simplify ordering and

assure correct installation/placement. We also recommend installing the same 1/16 Inch of Lead

equivalency in the Control Booth (including the Window) to assure keeping all staff exposures as

low as possible. To adhere to Michigan laws, we also recommend placing a second sheet of 1/16

Inch Lead around wall bucky, 1 foot out in each direction for a total of 1/8 Inch.

North/West-Wall/Window

Floor

Ceiling NA - Distance Alone

Pharmacy

(Control Booth)

(a) This is the total equivalent thickness of shielding required (inherent structural building materials plus

any additional shielding) for the barrier. Lead thicknesses have been rounded up to the nearest

commercially available thickness. Concrete thicknesses are based on a density of 147 lbs/ft3. Less dense

concrete will require thicker barriers to meet the shielding requirements.

(b) The door or window in this barrier shall meet the same shielding requirements as this barrier.

(c) The current / planned building materials consist of 4 inches of Concrete for the Floor and 0.06 inches

of Steel Decking for the Ceiling. The existing/planned materials will adequately shield all spaces above

and below this exam room.

South - Wall

Locker Room

West - Wall/Door

Workload: We used 50 patients per week as a conservative estimate based on patient volumes for this

department. This number was increased from the facility's estimated maximum of 10 patients per week

(considering 5 to 10 years of growth).

North - Wall

Potential Future Office

1/128" Lead

Staff Area

1/16 Inch Lead

1/16 Inch Lead

1/16 Inch Lead

1/16 Inch Lead

East - Wall

Planned Building Materials

(Steel Decking)Shields

(NA - Slab on Grade)

(Roof - Rare Maintenance)

0.774" Plate Glass

NA - Slab on Grade

1/32" Lead

1/128" LEAD -OR-

1/128" Lead - OR -

5/128" Lead

(Equivalent for Window)

NA - Slab on Grade

Wall & Door11.2" Solid Wood

(1/8" Around Wall Bucky)

1/16 Inch Lead


Radiographic Shielding Calculations & Information

Room: Radiographic - Room #1039 Scale Factors for Include Floor Plans:

Facility: Bay Mills Health Center Exam Room: 1/4" = 1 foot -- (Interior of Exam Room)

Address: 12455 W. Lakeshore Drive Brimley, MI 49715 Department: 1/8" = 1 foot -- (Wider area of building)

Equipment: Radiographic Unit

Reviewer(s): Shane McCotter, B.S.

Date: Workload Used:

Facility Stated:

Table Bucky/Tabletop:Workload for Table Bucky: mA min/week = (1.9 [from Table 4.3] x 50 [patients per week])

= 95.0 mA min/week

Direction - Barrier: North - Wall South - Wall South - Wall South - Wall West - Wall/Door West - Wall/Door East - Wall East - Wall North/West-Wall/Window

Area Beyond Barrier:

Mother's Room (Pot.

Office) Housekeeping Corridor

Locker Room (Potential

Office) Corridor Staff Area Corridor Pharmacy Control Booth

Occupancy Factor: 1 0.05 0.2 1 0.2 1 0.2 1 1

Primary Beam Use Factor: 0.02 0.02 0.02 0.02 0.02 0.02 0.09 0.09 0.00

Weekly Dose Limit: 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week

*Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet)

Dprime 17.88 8.90 17.02 22.51 11.10 18.77 5.95 11.65 9.93

Dscatter 17.88 8.90 17.02 22.51 11.10 18.77 5.95 11.65 9.93

Dleak 17.88 8.90 17.02 22.51 11.10 18.77 5.95 11.65 9.93

(Cross Table Exams)

(No Grid Attenuation)

(Cross Table Exams)

(No Grid Attenuation)

Wall Bucky:Workload for Wall Bucky: mA min/week = (0.6 [from Table 4.3] x 50 [patients per week])

= 30.0 mA min/week

Direction - Barrier: North - Wall South - Wall South - Wall South - Wall West - Wall/Door West - Wall/Door East - Wall East - Wall North/West-Wall/Window


Mother's Room (Pot.

Office) Housekeeping Corridor

Locker Room (Potential

Office) Corridor Staff Area Corridor Pharmacy Control Booth

Occupancy Factor: 1 0.05 0.2 1 0.2 1 0.2 1 1

Primary Beam Use Factor: 0.00 1.00 1.00 1.00 0.00 0.00 0.00 0.00 0.00

Weekly Dose Limit: 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week 2 mrem/week

*Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet) *Distance (feet)

Dprime 18.21 8.69 16.81 22.30 7.37 15.04 9.64 15.34 7.94

Dscatter 24.21 2.69 10.81 16.30 7.37 15.04 9.64 15.34 13.94

Dleak 18.21 8.69 16.81 22.30 7.37 15.04 9.64 15.34 7.94

(No Grid Attenuation) (No Grid Attenuation) (No Grid Attenuation)

Required Shielding Thickness per Material:Lead (mm): 0.192 mm 0.566 mm 0.584 mm 0.886 mm 0.127 mm 0.189 mm 0.522 mm 0.583 mm 0.16 mm

Lead (Inches): 1/128 in. 1/32 in. 1/32 in. 5/128 in. 1/128 in. 1/128 in. 1/32 in. 1/32 in. 1/128 in.

Gypsum (Inches): 2.31 in. 6.35 in. 6.52 in. 9.44 in. 1.55 in. 2.26 in. 5.68 in. 6.24 in. 1.89 in.

Concrete (Inches): 0.749 in. 1.98 in. 2.04 in. 2.96 in. 0.524 in. 0.737 in. 1.76 in. 1.94 in. 0.628 in.

Other: Wood (door): 8.62 in Wood (door): 11.2 in Plate Glass: 0.774 in.

**Recommended Shielding Type & Thickness:

Recommended: 1/16" Lead 1/16" Lead1/16" Lead (Wall &

Door)1/16" Lead

1/16" Lead (Wall &

Window)(1/8" Around Wall Bucky

(extended 1 foot on each

side)

Control Booth Window

must meet the same

shielding specification as

the corresponding wall.

Floor / Ceiling:

Direction - Barrier: Floor Ceiling

Area Beyond Barrier: NA - Slab on Grade Roof - Rare Maintenance

Occupancy Factor: 0.025

Primary Beam Use Factor: NA - Slab on Grade 0.00

Weekly Dose Limit: 2 mrem/week

Floor to Floor Distance: 14.5 feet

Known Building Materials: Concrete Steel Decking

Known Material Thickness: 4.00 0.06

*Distance (feet) *Distance (feet)

Dprime NA 11.17 Primary Beam

Use Factors

Dscatter NA 13.50 1.00 (Chest Bucky)

0.89 (Floor)

Dleak NA 11.17 0.09 (Cross-Table Wall)

0.02 (Wall #3)

Required Shielding Amounts per Material: 0.00 (No Primary Use)Lead (mm): 0. mm

Lead (Inches): 0/1 in.

Gypsum (Inches):

Concrete (Inches): . in.

Other: 0.00

Recommended Shielding Type & Thickness:Recommended: Planned 4" Concrete Planned Materials

50 patients/week (conservative estimate)

10 patients/week (max over 10 year growth)

November 27, 2019

Notes:*All measurements are in feet and have had 1 foot added to reach 1 foot beyond barrier.**We recommend shielding all walls with the thickest amount of shielding material required by any one wall to simplify order and assure accurate installation.

This form is used to collect and organize workloads, distance measurements, occupancy factors and weekly dose limits. The ac tual shielding calculations are performed using software XRAYBARR X-ray Shielding Calculation v1.5 by Douglas J. Simpkin.

Floor Below - 10ft Distance Calculation Example:10ft (floor to ceiling height) - 5.58ft (avg. height of human) = 4.42ft (floor surface to person's head below)Rad Tube: 3.28ft (table height) + 3.33ft (overhead tube height) = 6.61ft (used to calculate Rad Dp & Dl)Patient Scatter: 3.28ft (table height) = 3.28ft (used for Rad Dscatter calculation)Rad Tube: Dp & Dl = 4.42ft + 6.61ft = 11.03ft AND Ds = 4.42ft + 3.28ft = 7.7ft

Roof/Ceiling - 10ft Distance Calculation Example:10ft (floor to ceiling height) + 3.28ft (waist height) = 13.28ftRad Tube: 13.28ft - 3.28ft (table height) - 3.33 ft (overhead tube height to table) = 6.67 ft Total Distance for Dp & DlPatient Scatter: 13.28ft - 3.28 ft (table height) - 1 ft (average patient thickness) = 9.0ft for DscatterRad Tube: Dp & Dl = 6.67ft AND Ds = 9.0ft

Note: The same distances are used for both the Table Bucky and Wall Bucky calculations(shorter distance always used for Wall Bucky)


Summary Page: Mammography Tomosynthesis - Room #1038

Barrier Required Shielding *Recommended

Direction & (Description) Materials / Thickness Materials / Thickness

1Note: Maximum Allowed Patients/Week

North - Control Booth 1/128" Lead Window 1/32" Lead Window Over 1,000

Tech Control

**No Shielding Needed Planned Building Materials Over 1,000

Roof - Rare Maintenance (Distance Alone Suffices) (Steel Decking)

*We recommend installing a standard solid-core wooden door (eg, American Woodwork Institute Type PC5, 43 mm thick).

Floor NA - Slab on Grade NA - Slab on Grade NA

NA - Slab on Grade

*We recommend normal building materials of 1 & ¼” Gypsum (2 X 5/8” Gypsum wallboard – one on each side

of the wall) for all barriers. The West Wall requires the most shielding with a minimum of 0.52 Inches of

Gypsum wall board. However, the exam room Door must be at least 1.45 mm of solid wood to adequately shield

areas beyond (due to another wood door and gypsum wall beyond the exam room door). We recommend

installing a Standard Solid Core Wood Door (43 mm thick) to assure properly shielding, otherwise a steel door

of 1mm would also suffice.

Ceiling

East - Wall 0.36'" Gypsum 1.25" Gypsum 672

Radiographic Room

West - Wall 0.52" Gypsum 1.25" Gypsum 349

Staff Room

Corridor

South - Wall 0.25" Gypsum 1.25" Gypsum Over 1,000

We used 40 pateints per week as a concervative estimate (facility stated max of 16).

Patients/Week

Room Door 1.45 mm Solid Wood (Door) Solid Core Wood Door 103

1Maximum Allowed

Workload: 280 mA*min/week = (40 patients/week) X (7 mA*min/patient)

Based on the attached room drawing, the limiting point of concern is the Solid Core Wood Door at the North of the

room leading to the Corridor (occupancy = 0.2) which is an uncontrolled area 8.67 feet from the mammography

machine. This would limit the maximum number of patients per week to 103 with the indicated/recommended building

materials and machine position.

(a) This is the total equivalent thickness of shielding required (inherent structural building materials plus any additional shielding)

for the barrier. Lead thicknesses have been rounded up to the nearest commercially available thickness. Concrete thicknesses are

based on a density of 147 lbs/ft3. Less dense concrete will require thicker barriers to meet the shielding requirements.

(b) The door or window in this barrier shall meet the same shielding requirements as this barrier.

(c) The current / planned building materials consist of AT LEAST 4 inches of Concrete for the Floor and 0.0598 inches of Steel

Decking for the Ceiling. The existing/planned materials will adequately shield all spaces above and below this exam room.

Corridor

North - Wall 0.11" Gypsum 1.25" Gypsum Over 1,000

Staff Area


Mammography Shielding Calculations & Information

Room: Mammography Tomosynthesis - Room #1038 Broad Beam Secondary Transmission Function vs Thickness Variables Equations for Max Patients/Week Allowed:

Facility: Bay Mills Health Center α (mm^-1) β (mm^-1) γ beta / alpha Transmission B(x) = ((1+beta/alpha)*e^(alpha*gamma*x)-beta/alpha)^-1/gamma

Address: 12455 W. Lakeshore Drive Brimley, MI 49715 Gypsum 0.0643 0.3709 0.4628 5.7710 (NCRP 147 - Equation A.2 p. 117)

Equipment: Digital Tomographic Mammographic Unit Wood 0.0107 0.0137 0.2387 1.2820 N = number of patients/week

Reviewer(s): Shane McCotter, B.S. Concrete 0.1292 0.6718 0.4475 5.1997 K'= unshielded air kerma per patient at 1m = 0.036 mGy mammography

Date: Lead 15.44 67.38 0.2861 4.3640 P = weekly dose limit in mGy (0.02 mGy/week for uncontrolled area)

Steel 2.956 14.31 0.3706 4.8410

Plate Galss 0.1443 0.7505 0.4603 5.2010

(from table VI, Medical Physics, Vol. 40, No. 6. June 2013 - pg 063901-8)

(used conservative variables for 39 kVp for broad tungsten-anode with silver filter) T = occupancy (1, 1/2, 1/5, 1/8 etc)

Room Plan Scale: 1/4" = 1 foot -- (Interior of Exam Room) d = distance to the point of interest

Department Plan Scale: 1/8" = 1 foot -- (Wider area of building) Unshielded Air Kerma/patient (K'): 0.036 mGy at 1 meter (3.28') - NCRP 147 p. 92 d = d' + a (d'= distance to barrier, a is generally 1 foot for walls)

Unshielded Air Kerma/patient (K'): 0.388 mGy at 1 foot K = K'N/d^2 where d is the distance to the point of interest

Workload: and B = (P/T)/K

mA min/week Solving we get N(d) = ((d^2)*(P/T))/(B*K')

Workload Used: Equation for Shielding Material Thickness:

Facility Stated: Lead Thickness = (1/(α*γ))*Ln[((T^-γ+(β/α))/(1+(β/α))]

(T = Measured Transmission thru UnShielded)

Direction - Barrier:

Barrier Material:

Material Thickness (mm):


Occupancy Factor:

Weekly Dose Limit:

*Known Distance to Barrier:

Weekly Unshielded:

Transmission Required:

Required Gypsum

Required Wood:

Required Plate Glass:

Required Steel:

Required Concrete:

Required Lead:

Required Lead (as Fraction):

Required Shielding:

*Note: All 'Known Distance to Barrier' measurements are made from the KNOWN POSITION x-ray tube/II/patient inside the exam room to the far surface of the barrier/wall. All calculations automatically add 1 foot to achieve assumed position of occupants.

*Note: 'Known Distance to Barrier' may also be a distance outside of the exam room. Example: A 6 foot wide Corridor prevents the distance to an Office beyond the Corridor from being any closer than 6 feet (as measured from exterior surface of exam room wall to interior surface of Office wall).

Maximum Patients per Week Allowed for Known Distances (for indicated workload, distance & shielding materials):

Maximum Patients:

Note: Maximum patients indicates how many patients result in reaching noted Weekly Dose Limit for barrier specifically for the indicated 'Barrier Material / Thickness' AND 'Known Distance to Barrier' (as specified per barrier).

(Without a 'Known Distance to Barrier' entered, the 'Max Patients per Week Allowed' will not be calculated.)

Material Material B(x) Standard Building Materials - Shielding Properties

Thickness Transmission Material Material B(x)

31.75 mm 0.004976 (2 X 5/8") Thickness Transmission

43 mm 0.373313 (Min. tolerance) Steel (20 Ga) 0.0359 inches 0.9119 mm 0.001541 (20 Gauge)

Floor / Ceiling: Concrete (Wall) 1.00 inches 25.40 mm 0.001029 Steel (18 Ga) 0.0478 inches 1.2141 mm 0.000460 (18 Gauge)

Concrete (Floor / Ceiling) Steel (16 Ga) 0.0598 inches 1.5189 mm 0.000152 (16 Gauge)

Direction - Barrier: Floor 4.00 inches 101.6 mm 0.00000003 Plate Glass 0.25 inches 6.35 mm 0.043059

Area Beyond Barrier: Ceiling 0.06 inches 1.5 mm 0.00015202

Occupancy Factor:

Weekly Dose Limit:

Floor to Floor Distance: Max Allowable Patients/week vs. Distance (Reference Charts)Known Building Materials: (Specific for Uncontrolled Areas - 2 mrem Dose Limit)

Known Material Thickness: *All Distances are to the wall surface inside exam room.

**Distance to Barrier:

Weekly Unshielded: Occupancy= 1 0.5 0.2 0.125 1 0.5 0.2 0.125

Transmission Required: Distance (ft)

1 41 83 207 332 1 1 3 4

Required Shielding: 2 93 187 467 747 1 2 6 10

3 166 332 830 1328 2 4 11 18

Maximum Patients per Week Allowed N(d,T): 4 259 519 1297 2075 3 7 17 28

Maximum Patients: 5 373 747 1867 2987 5 10 25 40

6 508 1017 2541 4066 7 14 34 54

Roof/Ceiling - 10ft Distance Calculation Example: 7 664 1328 3319 5311 9 18 44 71

10ft (floor to ceiling height) + 3.28 ft (waist height) = 13.28ft 8 840 1680 4201 6722 11 22 56 90

13.28ft - 6ft (tube height) = 7.28ft Total Distance 9 1037 2075 5187 8299 14 28 69 111

10 1255 2510 6276 10041 17 33 84 134

Floor Below - 10ft Distance Calculation Example: 11 1494 2987 7469 11950 20 40 100 159

10ft (floor to ceiling height) - 5.58ft (avg. height of human) = 4.42ft (height below difference) 12 1753 3506 8765 14025 23 47 117 187

4ft (bucky height) + 2ft (tube to bucky height) = 6ft (used to calculate Dp & Dl) 13 2033 4066 10166 16265 27 54 135 217

4ft (bucky height) (used for Dscatter calculation) 14 2334 4668 11670 18672 31 62 156 249

Dp & Dl = 4.42ft + 6ft = 10.42ft and Ds = 4.42ft + 4ft = 8.42ft 15 2656 5311 13278 21244 35 71 177 283

(P/T)/(B*K')= 111.66 223.31 558.28 893.25 1.49 2.98 7.44 11.91

0.00 inches Steel

NA - Slab on Grade Over 1,000 Patients

0.0028 mGy

7.1622 Max Patients Max Patients

4.00 inches 0.06 inches

11.78 1.25" Gypsum Standard Solid Wood Door (43 mm Wood))

*Example: American Woodwork Institute Type PC5, 43 mm thick

0.02 mGy/week

NA 14.5 feet

Concrete Steel Decking

Floor Ceiling

NA - Slab on Grade Roof - Rare Maintenance

NA - Slab on Grade 0.025

Standard Building

Materials Standard Building

Standard 1.25" Gypsum: Materials

*Standard Solid Wood Door:

103 patients Over 1,000 Patients Over 1,000 Patients Over 1,000 Patients Over 1,000 Patients 349 patients 672 patients Over 1,000 Patients

1/128 in Lead 1/128 in Lead

1.45 mm Wood 0.05 inches Gypsum 0.11 inches Gypsum 0.23 inches Gypsum 0.25 inches Gypsum 0.52 inches Gypsum 0.36 inches Gypsum

1/128 in Lead 1/128 in Lead 1/128 in Lead 1/128 in Lead 1/128 in Lead 1/128 in Lead

0.0613 mm Lead

0.000 mm Lead 0.006 mm Lead 0.014 mm Lead 0.027 mm Lead 0.029 mm Lead 0.054 mm Lead 0.040 mm Lead 0.061 mm Lead

0.06 inches Concrete 0.84 inches Concrete 1.77 inches Concrete 3.23 inches Concrete 3.53 inches Concrete 6.12 inches Concrete 4.67 inches Concrete 6.81 inches Concrete

0.18 inches Plate Glass 0.29 inches Plate Glass

0.0021 mm Steel 0.0316 mm Steel 0.0696 mm Steel 0.1363 mm Steel 0.1507 mm Steel 0.2916 mm Steel 0.2097 mm Steel

0.00 inches Plate Glass 0.02 inches Plate Glass 0.06 inches Plate Glass 0.11 inches Plate Glass 0.12 inches Plate Glass 0.25 inches Plate Glass

0.3329 mm Steel

1.45 mm Wood 21.38 mm Wood 44.87 mm Wood 82.06 mm Wood 89.55 mm Wood 155.57 mm Wood 118.60 mm Wood 173.05 mm Wood

0.00 inches Gypsum 0.05 inches Gypsum 0.11 inches Gypsum 0.23 inches Gypsum 0.26 inches Gypsum 0.52 inches Gypsum 0.37 inches Gypsum 0.60 inches Gypsum

0.0836 0.03230.9653 0.6033 0.3586 0.1671 0.1444 0.0434

0.021 mGy 0.033 mGy 0.056 mGy 0.120 mGy 0.138 mGy 0.461 mGy 0.239 mGy 0.620 mGy

8.67 feet 8.67 feet 15.67 feet 4.09 feet 9.58 feet 4.80 feet 7.05 feet 4.00 feet

1.000 1.000

0.02 mGy/week 0.02 mGy/week 0.02 mGy/week 0.02 mGy/week 0.02 mGy/week 0.02 mGy/week 0.02 mGy/week

0.125 0.200 1.000 0.200 1.000 1.000

0.02 mGy/week

Corridor Corridor Staff Work Area Corridor Locker Room (Potential Office) Staff Room Radiology Room Control Area

November 27, 2019

= ( 7.0 [from Table 4.3] X 40 [patients per week])

= 280.0 mA min/week

40 patients/week (conservative estimate)

16 patients/week (max over 10 year growth)

Lead - 1/32"

43.00 mm 31.75 mm 31.75 mm 31.75 mm 31.75 mm 31.75 mm 31.75 mm 25.40 mm

Solid Wood Door (43 mm) 1.25" Gypsum 1.25" Gypsum 1.25" Gypsum 1.25" Gypsum 1.25" Gypsum 1.25" Gypsum

East - Wall Tech ShieldNorth - Room Door North - Wall North - Wall South - Wall South - Wall West - Wall


Documents Included in Appendix

Architectural Floor Plans: Exam Room(s) Interior (Equipment Layout)

Post-Construction Shielding Inspection Form

Brimley, MI 49715

November 27, 2019

Within this Appendix are various supporting and reference documents that

MUST be included with any copy of this report (whether printed or digital).

State regulations also require these documents to be included AND a copy of

this report MUST remain physically with the building (even if the building is

sold). Without these documents, future changes in equipment, room

construction/layout or number of exams CANNOT be accurately calculated

and/or compared to the finding in this report.

Shielding Placard: Example & Blank Placard

APPENDIX

Radiology Room Shielding Evaluation Report


Architectural Floor Plans: Department / Building

Thickness Conversion Chart: Inches to mm

Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report Appendix Summary

48"

GFI

48"

GFI

AC

GFI

AC

GFI

GFI

GFI AC

GFI48"GFI

GFI

GFIG

FI

GFI

GFI

GFI AC

GFI

(2)

(2)

ACGFI

(2)

(2)

(2)(2)

(2)

48"GFI

ACGFI

ACGFI

ACGFI

ACGFI

ACGFI

ACGFI

ACGFI

ACGFI

AC

GFI

AC

GFI

AC

GFI

(2)

(2)

(2)(2)

AC AC AC AC(2) (2)(2)AC

(2)AC

(2)AC

(2)AC

GFI

AC

GFI

(2)

(2)

AC

OS

D

SES

SCR

S CRS ES

S

ESS

CR

S

S

W (2)

S

ES S

CR

OS

D

D

ACGFI

ACGFI

D

DD

D

OS

D

D

(2)

(2)

(2)

D D D

4 3

3

PHARMACYWORK1023

DATA1026

LOCKERROOM (44Lockers)

1027

LOCKERROOM (44Lockers)

1028

STAFFBREAKROOM1029

TOILET1033B

TOILET1033A

STAFFMOTHERS

ROOM1031

MAMMO1038

HOUSEKEEPING1030

HALLWAY1025

HALLWAY1024

PHARMACYCONSULT

1021

PHARMACYRETAIL1020A

HALLWAY1004

OUTREACH(CHELSEY)

1019

INSURANCE(SHELLEY)

1018

CHANGE1039A

MOTHERSROOM1009HALLWAY

1007A

TOILET1040

HALL1037

STAFF WORK1037A

WAIT1036

WOMENSTOILET1008

WAITING1007

Hall1006

HALLWAY1034A

RADIOLOGY1039

ÉåêáÅÜ

áåÖ

ÅçããìåáíáÉë

íÜêç

ìÖÜ

~êÅÜ

áíÉÅíìêÉ

ÇìäìíÜ=G=îáêÖáåá~G=íï

áå=ÅáíáÉë

ïïïKÇëÖ

ïKÅçã

éêç

àÉÅí=@

Ç~íÉ

êÉîáëáçå=L=áëëìÉ

ëÜÉÉí=åìãÄÉê

çÑ1

0/2

4/2

01

9 9

:46

:40

AM

Ba

y M

ills

Hea

lth

Cen

ter

12

45

5 W

. La

kes

ho

re D

riv

e

Br

imle

y, M

ich

iga

n 4

97

15

01

81

31

.00

1/8

" p

lan

12

1/8" = 1'-0"1

Phy Plan 1/8"

printed on 11" x 17" paper

N

Corridor Occ: 0.2

Staff Area Occ: 1.0

Radiology Occ: 1.0

Corridor Occ: 0.2

Locker Room (Potential Office) Occ: 1.0

Staff Room Occ: 1.0

Corridor Occ: 0.2

Mammo Occ: 1.0

Mother's Room (Potential Office) Occ: 1.0

Waiting Room Occ: 0.05

Pharmacy Occ: 1.0Restroom

Occ: 0.2

Housekeeping Occ: 0.05

Locker Room (Potential Office) Occ: 1.0

7.09 ft

5.49 ft

5.70 ft

ACGFI

GFI

GFI

AC

GFI

(2)

ACGFI

GFI

AC

GFI

(2)

OS

D

D

AC

DD

D

OS

HOUSEKEEPING1030

MAMMO1038

HALL1037

STAFF WORK1037A

HALLWAY1007A

MOTHERSROOM1009

CHANGE1039A

STAFFMOTHERS

ROOM1031

HALLWAY1025

HALLWAY1024

Hall1006

RADIOLOGY1039

13

'-0

"5

'-9

"7

'-1

"2

'-9

"5

'-3

"

11'-5" 14'-6"

8'-

1"

20

'-6

"

7'-8"

5'-5" 9'-1"

shield wall stop at 7'-0" above floor

ÉåêáÅÜ

áåÖ

ÅçããìåáíáÉë

íÜêç

ìÖÜ

~êÅÜ

áíÉÅíìêÉ

ÇìäìíÜ=G=îáêÖáåá~G=íï

áå=ÅáíáÉë

ïïïKÇëÖ

ïKÅçã

éêç

àÉÅí=@

Ç~íÉ

êÉîáëáçå=L=áëëìÉ

ëÜÉÉí=åìãÄÉê

çÑ1

0/2

4/2

01

9 9

:46

:41

AM

Ba

y M

ills

Hea

lth

Cen

ter

12

45

5 W

. La

kes

ho

re D

riv

e

Br

imle

y, M

ich

iga

n 4

97

15

01

81

31

.00

1/4

" P

lan

22

1/4" = 1'-0"1

Physicist Plan 1/4"

N

Walls:Green walls: 3 5/8" mtl studs with 5/8" gyp on each side, walls to deck (exception sheild wall in radiology room, see plan)Blue walls: 6" mtl studs with 5/8" gyp on each side, walls to deck

Floor: 4" concrete slab on grade

CeilingAccoustic ceiling tile 9'-6" above finished floorRoof deck is at 14'-6" above finisehd floor, constructed of metal decking with 6" of rigid insulation. no occupied spaces above radiology or on the roof

General Notes: 1) project is all new construction2) Estimated workload:

X-Ray: 2 patients per day, 5 days a week*Mammo: 2-4 patient per day, 4 days a week*

*the clinic hopes to increase workload within a year of opening, double the number to accomodate projected future use.

PROJECT INFORMATIONBay Mills Health Center12455 W. Lakeshore DriveBrimley, Michigan 49715

Clinic Contact:Audrey [email protected]

Design Team Contact:Jessica [email protected]

printed on 11" x 17" paper

4.95 ft10.10 ft

7.90 ft16.88 ft

1.69 ft

6.94 ft

7.67 ft

6.00

ft

8.12

ft

6.37 ft

0.33

ft

8.64 ft

8.93 ft

NO

RT

H0.42 ft

0.42 ft

0.42 ft

4.80 ft 7.05 ft

3.96 ft

Thickness Conversion Chart (mm to Inches)

mm Inches Fraction (In) mm Inches Fraction (In)

0.1984 0.0078 1/128

0.3969 0.0156 1/64

0.7938 0.0313 1/32 13.0969 0.5156 33/64

0.9922 0.0391 5/128 13.4938 0.5313 17/32

1.1906 0.0469 3/64 13.8906 0.5469 35/64

1.5875 0.0625 1/16 14.2875 0.5625 9/16

1.9844 0.0781 5/64 14.6844 0.5781 37/64

2.3813 0.0938 3/32 15.0813 0.5938 19/32

2.7781 0.1094 7/64 15.4781 0.6094 39/64

3.1750 0.1250 1/8 15.8750 0.6250 5/8

3.5719 0.1406 9/64 16.2719 0.6406 41/64

3.9688 0.1563 5/32 16.6688 0.6563 21/32

4.3656 0.1719 11/64 17.0656 0.6719 43/64

4.7625 0.1875 3/16 17.4625 0.6875 11/16

5.1594 0.2031 13/64 17.8594 0.7031 45/64

5.5563 0.2188 7/32 18.2563 0.7188 23/32

5.9531 0.2344 15/64 18.6531 0.7344 47/64

6.3500 0.2500 1/4 19.0500 0.7500 3/4

6.7469 0.2656 17/64 19.4469 0.7656 49/64

7.1438 0.2813 9/32 19.8438 0.7813 25/32

7.5406 0.2969 19/64 20.2406 0.7969 51/64

7.9375 0.3125 5/16 20.6375 0.8125 13/16

8.3344 0.3281 21/64 21.0344 0.8281 53/64

8.7313 0.3438 11/32 21.4313 0.8438 27/32

9.1281 0.3594 23/64 21.8281 0.8594 55/64

9.5250 0.3750 3/8 22.2250 0.8750 7/8

9.9219 0.3906 25/64 22.6219 0.8906 57/64

10.3188 0.4063 13/32 23.0188 0.9063 29/32

10.7156 0.4219 27/64 23.4156 0.9219 59/64

11.1125 0.4375 7/16 23.8125 0.9375 15/16

11.5094 0.4531 29/64 24.2094 0.9531 61/64

11.9063 0.4688 15/32 24.6063 0.9688 31/32

12.3031 0.4844 31/64 25.0031 0.9844 63/64

12.7000 0.5000 1/2 25.4000 1.0000 1

(NCRP report #147, Figure 2.3)

Inches Equivalent Weight

(fractions) in mm lbs/ft^2

1/32 0.79 1.85

5/128 1 2.31

3/64 1.19 2.76

1/16 1.58 3.69

5/64 1.98 4.6

3/32 2.38 5.53

1/8 3.17 8

Commercially available Lead sheet

thicknesses and associated weight

USE: This chart converts mm thickness values into the next thickest Inch

equivalent in 1/64 inch increments.

Note: The 1/128" & 5/128" thicknesses are included since these are commercially available Lead thicknesses.

Thickness Thickness

Radiation Physics Consultants, Inc. Radiation Shielding Evaluation Report


Site Location:

Sites Address:

Room / Location:

Type of X-Ray Equipment Used:

Barrier Minimum Required Recommended

North Wall 1/128" Lead 1/16" Lead

South Wall 5/128" Lead 1/16" Lead

South Wall (1 foot beyond Bucky) 1/8" Lead

West Wall 1/128" Lead 1/16" Lead

East Wall 1/32" Lead 1/16" Lead

Door (West) 11.2" Solid Wood 1/16" Lead

Control Booth Wall (North/West) 1/128" Lead 1/16" Lead

Control Booth Window (North/West) 0.774" Plate Glass 1/16" Lead Equivalent

Ceiling None Planned Steel Sheeting

Floor NA - Slab on Grade Planned 4" Concrete

Note: If this room requires no lead shielding (i.e. only gypsum/sheetrock), please indicate "NA" for items 1 to 3.

1. Was the lead installed up to at least 7' on all required barriers?

Yes No NA

Yes No NA

3. Are all door jams, window edges and wall corners adequately wrapped/covered?

Yes No NA

Who conducted the inspection:

Company & Title of Inspector:

Date of the inspection:

Note: If any of the following questions above is answered "No", than construction should be stopped and no radiographic exposures

*Use this document to help create your permanent placard which states what is actually present.*

Printed Name Signature

2. Are all objects/holes that are cut through the lead in the wall adequately wrapped with an equivalent lead thickness (i.e.

electrical boxes with pliable lead sheets on the back of the electrical box inside the wall, light switches, plumbing)? *This assures no

radiation can leak through any holes cut into the wall.

*In the following list, please indicate what was actually installed into each barrier (circle one of the options below or fill in a

different amount under the Other Thickness & Type section).

Other Thickness & Type


12455 W. Lakeshore Drive Brimley, MI 49715

(Street, City, State, Zip Code)


Radiographic Unit

Reason for Post-Construction Inspection: This inspection is to help a site document what was actually installed within all

room barriers.

Copyright (c) 2016 Radiation Physics Consultants, Inc., All rights reserved.


Site Location:

Sites Address:

Room / Location:

Type of X-Ray Equipment Used:

Barrier Minimum Required Recommended

North Wall 0.11" Gypsum 1.25" Gypsum

South Wall 0.25" Gypsum 1.25" Gypsum

West Wall 0.52" Gypsum 1.25" Gypsum

East Wall 0.36" Gypsum 1.25" Gypsum

Door (North) 1.45mm Solid Wood 43mm Solid Core Wood Door

Control Booth Wall 1/128" Lead 1/32" Lead

Control Booth Window 1/128" Lead 1/32" Lead

Ceiling None Planned Steel Sheeting

Floor NA - Slab on Grade Planned 4" Concrete

Note: If this room requires no lead shielding (i.e. only gypsum/sheetrock), please indicate "NA" for items 1 to 3.

1. Was the lead installed up to at least 7' on all required barriers?

Yes No NA

Yes No NA

3. Are all door jams, window edges and wall corners adequately wrapped/covered?

Yes No NA

Who conducted the inspection:

Company & Title of Inspector:

Date of the inspection:

Note: If any of the following questions above is answered "No", than construction should be stopped and no radiographic exposures

*Use this document to help create your permanent placard which states what is actually present.*

Printed Name Signature

2. Are all objects/holes that are cut through the lead in the wall adequately wrapped with an equivalent lead thickness (i.e. electrical

boxes with pliable lead sheets on the back of the electrical box inside the wall, light switches, plumbing)? *This assures no radiation can leak

through any holes cut into the wall.

Other Thickness & Type


12455 W. Lakeshore Drive Brimley, MI 49715

(Street, City, State, Zip Code)


Digital Tomographic Mammographic Unit

*In the following list, please indicate what was actually installed into each barrier (circle one of the options below or fill in a different

amount under the Other Thickness & Type section).

Reason for Post-Construction Inspection: This inspection is to help a site document what was actually installed within all room

barriers.

Copyright (c) 2016 Radiation Physics Consultants, Inc., All rights reserved.

Facility:

Address:

Exam Room:

North Wall

East Wall

South Wall

West Wall

Control Booth

Room Door

Floor

Ceiling 3.5 Inches of Solid Concrete


12455 W. Lakeshore Drive, Brimley, MI 49715


Shielding Type & Thickness

DO NOT REMOVE - Must Be Post Per State Law

1/16 inch Lead - Wall & Door

5/8" Gypsum (Sheetrock) - Exterior Brick - Window Glass

1.25 Inches Gypsum (5/8" Sheetrock each side of wall)

1/16 inch Lead

1/16 inch Lead - (Wall & Equivalent for Window)

Concrete Slab on Ground

Solid Core Wood Door (43 mm Wood)

*Post this in the exam room as required by MN Rules 4732.0360 Subpart 7.

The type and thickness of radiation shielding materials listed above are the specific amounts permanently and physically cons tructed within the walls and barriers of this exam room.(This may be more than what was recommended by the shielding report).

ALL DOORS, WINDOWS & OTHER BARRIERS MEET THE SAME SHIELDING EQUIVALENCE.

**Must Determine/Verify the Actual Materials/Thickness Physically Installed

in Each Barrier (Use Blank Placard Included). This is an Example ONLY!

Facility:

Address:

Exam Room:

North Wall

East Wall

South Wall

West Wall

Control Booth

Room Door

Floor

Ceiling

Shielding Type & Thickness

DO NOT REMOVE - Keep Posted in Exam Room

The type and thickness of radiation shielding materials listed above are the specific amounts permanently and physically constructed within the walls and barriers of this exam room.(This may be more than what was recommended by the shielding report).

ALL DOORS, WINDOWS & OTHER BARRIERS MEET THE SAME SHIELDING EQUIVALENCE.

AIA®

Document A305 ™ – 1986

Contractor's Qualification Statement

AIA Document A305 ™ – 1986. Copyright © 1964, 1969, 1979 and 1986 byThe Americ an Institute of Architects. All rights reserved. The “American Institute of Architects,” “AIA,” the AIA Logo, and “AIA Contr act Documents” are registered trademarks and may no t be used without permission. This draft was produced by AIA software at 17:24:33 ET on 08/2 0/2020 under Order No.9533880565 which expires on 0 1/09/2021, is not for resale, is licensed for one-time use only, and may only be used in acco rdance with the AIA Contract Documents ® Terms of Service. To report copyright violations, e-mail [email protected]. User Notes: (1834300230)

1

ADDITIONS AND DELETIONS: The author of this document has added information needed for its completion. The author may also have revised the text of the original AIA standard form. An Additions and Deletions Report that notes added information as well as revisions to the standard form text is available from the author and should be reviewed.

This document has important legal consequences. Consultation with an attorney is encouraged with respect to its completion or modification.

This form is approved and recommended by the American Institute of Architects (AIA) and The Associated General Contractors of America (AGC) for use in evaluating the qualifications of contractors. No endorsement of the submitting party or verification of the information is made by AIA or AGC.

ELECTRONIC COPYING of any portion of this AIA ® Document to another electronic file is prohibited and constitutes a violation of copyright laws as set forth in the footer of this document.

The Undersigned certifies under oath that the information provided herein is true and sufficiently complete so as not to

be misleading.

SUBMITTED TO:

ADDRESS:

SUBMITTED BY:

NAME:

ADDRESS:

PRINCIPAL OFFICE:

[ ] Corporation

[ ] Partnership

[ ] Individual

[ ] Joint Venture

[ ] Other

NAME OF PROJECT: (if applicable) Bay Mills Health Center, Brimley, MI

TYPE OF WORK: (file separate form for each Classification of Work)

[ ] General Construction

[ ] HVAC

[ ] Electrical

[ ] Plumbing

[ ] Other: (Specify)

§ 1 ORGANIZATION

§ 1.1 How many years has your organization been in business as a Contractor?

§ 1.2 How many years has your organization been in business under its present business

name?

§ 1.2.1 Under what other or former names has your organization operated?

§ 1.3 If your organization is a corporation, answer the following:

§ 1.3.1 Date of incorporation:

§ 1.3.2 State of incorporation:

§ 1.3.3 President's name:

§ 1.3.4 Vice-president's name(s)


2

§ 1.3.5 Secretary's name:

§ 1.3.6 Treasurer's name:

§ 1.4 If your organization is a partnership, answer the following:

§ 1.4.1 Date of organization:

§ 1.4.2 Type of partnership (if applicable):

§ 1.4.3 Name(s) of general partner(s)

§ 1.5 If your organization is individually owned, answer the following:

§ 1.5.1 Date of organization:

§ 1.5.2 Name of owner:

§ 1.6 If the form of your organization is other than those listed above, describe it and name the principals:

§ 2 LICENSING § 2.1 List jurisdictions and trade categories in which your organization is legally qualified to do business, and indicate

registration or license numbers, if applicable.

§ 2.2 List jurisdictions in which your organization's partnership or trade name is filed.

§ 3 EXPERIENCE

§ 3.1 List the categories of work that your organization normally performs with its own forces.

§ 3.2 Claims and Suits. (If the answer to any of the questions below is yes, please attach details.)

§ 3.2.1 Has your organization ever failed to complete any work awarded to it?

§ 3.2.2 Are there any judgments, claims, arbitration proceedings or suits pending or outstanding against your

organization or its officers?

§ 3.2.3 Has your organization filed any law suits or requested arbitration with regard to construction contracts

within the last five years?

§ 3.3 Within the last five years, has any officer or principal of your organization ever been an officer or principal of

another organization when it failed to complete a construction contract? (If the answer is yes, please attach details.)


3

§ 3.4 On a separate sheet, list major construction projects your organization has in progress, giving the name of

project, owner, architect, contract amount, percent complete and scheduled completion date.

§ 3.4.1 State total worth of work in progress and under contract:

§ 3.5 On a separate sheet, list the major projects your organization has completed in the past five years, giving the

name of project, owner, architect, contract amount, date of completion and percentage of the cost of the work

performed with your own forces.

§ 3.5.1 State average annual amount of construction work performed during the past five years:

§ 3.6 On a separate sheet, list the construction experience and present commitments of the key individuals of your

organization.

§ 4 REFERENCES

§ 4.1 Trade References:

§ 4.2 Bank References:

§ 4.3 Surety:

§ 4.3.1 Name of bonding company:

§ 4.3.2 Name and address of agent:

§ 5 FINANCING

§ 5.1 Financial Statement.

§ 5.1.1 Attach a financial statement, preferably audited, including your organization's latest balance sheet and

income statement showing the following items:


4

Current Assets (e.g., cash, joint venture accounts, accounts receivable, notes receivable, accrued

income, deposits, materials inventory and prepaid expenses);

Net Fixed Assets;

Other Assets;

Current Liabilities (e.g., accounts payable, notes payable, accrued expenses, provision for income

taxes, advances, accrued salaries and accrued payroll taxes);

Other Liabilities (e.g., capital, capital stock, authorized and outstanding shares par values, earned

surplus and retained earnings).

§ 5.1.2 Name and address of firm preparing attached financial statement, and date thereof:

§ 5.1.3 Is the attached financial statement for the identical organization named on page one?

§ 5.1.4 If not, explain the relationship and financial responsibility of the organization whose financial

statement is provided (e.g., parent-subsidiary).

§ 5.2 Will the organization whose financial statement is attached act as guarantor of the contract for construction?

§ 6 SIGNATURE

§ 6.1 Dated at this day of

Name of Organization:

By:

Title:

§ 6.2

M being duly sworn deposes and says that the information provided herein

is true and sufficiently complete so as not to be misleading.

Subscribed and sworn before me this day of

Notary Public:

My Commission Expires:

18131 / Bay Mills Health Center 08 33 26 - 1 OVERHEAD COILING GRILLES

SECTION 08 33 26

OVERHEAD COILING GRILLES

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Overhead coiling metal grilles and operating hardware, electric operation.

B. Wiring from electric circuit disconnect to operator to control station.

1.02 RELATED SECTIONS

A. Section 26 27 17 - Equipment Wiring: Power to disconnect.

B. Section 26 05 34 - Conduit: Conduit from electric circuit to operator and from operator to control station.

1.03 REFERENCE STANDARDS

A. ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process; 2013.

B. ASTM B169/B169M - Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar; 2010.

C. ASTM B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes; 2013.

D. ASTM B221M - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]; 2013.

E. NEMA 250 - Enclosures for Electrical Equipment (1000 Volts Maximum); National Electrical Manufacturers Association; 2014.

F. NEMA ICS 2 - Industrial Control and Systems: Controllers, Contactors, and Overload Relays, Rated 600 V; National Electrical Manufacturers Association; 2000 (R2008).

G. NEMA MG 1 - Motors and Generators; National Electrical Manufacturers Association; 2011.

H. UL (EAUED) - Electrical Appliance and Utilization Equipment Directory; Underwriters Laboratories Inc.; current edition.

1.04 SUBMITTALS

A. See Section 01 30 00 - Administrative Requirements, for submittal procedures.

B. Product Data: Provide general construction, component connections and details, color selection charts.

C. Shop Drawings: Indicate pertinent dimensioning, anchorage methods, hardware locations, and installation details.

D. Manufacturer's Installation Instructions: Indicate installation sequence and procedures, adjustment and alignment procedures.

E. Maintenance Data: Indicate lubrication requirements and frequency.

PART 2 PRODUCTS

2.01 MANUFACTURERS

A. Overhead Coiling Grilles:

1. Overhead Door Corporation; Product 670 Series: www.OverheadDoor.com.

2. Substitutions: See Section 01 60 00 - Product Requirements.

2.02 GRILLE AND COMPONENTS

A. Grille: Aluminum; horizontal bar curtain, coiling on overhead counterbalanced shaft.

1. Finish: Anodized, Clear color.

2. Lock: Outside cylinder lock.

3. Electric operation.

4. Mounting: As indicated.


B. Curtain: Round horizontal bars connected with vertical links.

1. Horizontal bars: 5/16 inch diameter.

2. Bar spacing: 1 1/2 inch on center.

3. Tube spacers: 1/2 inch diameter.

4. Spacer spacing: 3 1/4 inch on center.

5. Link spacing: 9 inch on center.

6. Bar Ends: Provide with nylon runners for quiet operation.

7. Bottom Bar: Back-to-back angles with tubular resilient cushion.

C. Guides: Extruded aluminum angles, of profile to retain grille in place with snap-on trim, mounting brackets of same metal.

D. Hood Enclosure: 24 gage galvanized steel sheet; internally reinforced to maintain rigidity and shape.

1. Finish: Factory painted, color as selected.

E. Hardware:

1. Lock Cylinders: Manufacturer's standard type; keyed master keyed.

2. Latching: Inside mounted, adjustable keeper, spring activated latch bar with feature to keep in locked or retracted position.

3. Latch Handle: Interior and exterior handle.

F. Roller Shaft Counterbalance: Steel pipe and helical steel spring system, capable of producing torque sufficient to ensure smooth operation of curtain from any position and capable of holding position at mid-travel; with adjustable spring tension; requiring 25 lb nominal force to operate.

2.03 MATERIALS

A. Aluminum: ASTM B221 (ASTM B221M).

B. Galvanized Steel Sheet: ASTM A653/A653M, galvanized to minimum G90/Z275 coating.

2.04 ELECTRIC OPERATION

A. Electric Operators:

1. Mounting: Side mounted.

2. Motor Enclosure:

3. Motor Rating: 1/3 hp; continuous duty.

4. Motor Voltage: 120 volt, single phase, 60 Hz.

5. Motor Controller: NEMA ICS 2, full voltage, reversing magnetic motor starter.

6. Controller Enclosure: NEMA 250 Type 1.

7. Opening Speed: 12 inches per second.

8. Brake: Adjustable friction clutch type, activated by motor controller.

9. Manual override in case of power failure.

B. Control Station: Standard keyed switch (OPEN-STOP-CLOSE) momentary control for each operator.

1. 24 volt circuit.

2. Surface mounted.

C. Safety Edge: Located at bottom of curtain, full width, electro-mechanical sensitized type, wired to stop operator upon striking object, hollow neoprene covered.

PART 3 EXECUTION

3.01 EXAMINATION

A. Verify that opening sizes, tolerances and conditions are acceptable.

3.02 INSTALLATION

A. Install grille unit assembly in accordance with manufacturer's instructions.

B. Use anchorage devices to securely fasten assembly to wall construction and building framing without distortion or stress.


C. Securely and rigidly brace components suspended from structure. Secure guides to structural members only.

D. Fit and align assembly including hardware; level and plumb, to provide smooth operation.

E. Coordinate installation of electrical service with Section 26 27 17.

F. Complete wiring from disconnect to unit components.

G. Install perimeter trim.

3.03 TOLERANCES

A. Maintain dimensional tolerances and alignment with adjacent work.

B. Maximum Variation From Plumb: 1/16 inch.

C. Maximum Variation From Level: 1/16 inch.

D. Longitudinal or Diagonal Warp: Plus or minus 1/8 inch per 10 ft straight edge.

3.04 ADJUSTING

A. Adjust grille, hardware and operating assemblies for smooth and noiseless operation.

3.05 CLEANING

A. Clean grille and components.

B. Remove labels and visible markings.

END OF SECTION

18131 / Bay Mills Health Center 08 36 13 - 1 SECTIONAL DOORS

SECTION 08 36 13

SECTIONAL DOORS

PART 1 GENERAL


A. Overhead sectional doors, manually and electrically operated.

B. Operating hardware and supports.

C. Electrical controls.

1.02 RELATED REQUIREMENTS

A. Section 06 10 00 - Rough Carpentry: Rough wood framing for door opening.

B. Section 07 92 00 - Joint Sealants: Sealing joints between frames and adjacent construction.

C. Section 26 27 17 - Equipment Wiring.


A. ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process; 2013.

B. DASMA 102 - American National Standard Specifications for Sectional Overhead Type Doors; Door & Access Systems Manufacturers' Association, International; 2011.

C. NFPA 70 - National Electrical Code; National Fire Protection Association; Most Recent Edition Adopted by Authority Having Jurisdiction, Including All Applicable Amendments and Supplements.

1.04 SUBMITTALS


B. Shop Drawings: Indicate opening dimensions and required tolerances, connection details, anchorage spacing, hardware locations, installation details.

C. Samples: Submit two panel finish samples,illustrating color and finish.

D. Operation Data: Include electrical control adjustments.

E. Maintenance Data: Include data for motor and transmission, shaft and gearing, lubrication frequency, spare part sources.

F. Warranty: Submit manufacturer warranty and ensure forms have been completed in Owner's name and registered with manufacturer.

1.05 QUALITY ASSURANCE

A. Manufacturer Qualifications: Company specializing in manufacturing the products specified in this section with minimum three years of documented experience.

B. Installer Qualifications: Company specializing in performing the work of this section with minimum 3 years of experience.

C. Conform to applicable code for motor and motor control requirements.

D. Products Requiring Electrical Connection: Listed and classified by Underwriters Laboratories Inc., as suitable for the purpose specified.

1.06 WARRANTY

A. See Section 01 78 00 - Closeout Submittals for warranty requirements.

B. Correct defective Work within a two year period after Date of Substantial Completion.

C. Warranty: Include coverage for electric motor and transmission.

D. Provide five year manufacturer warranty for electric operating equipment.


PART 2 PRODUCTS

2.01 MANUFACTURERS

A. Sectional Doors:

1. Clopay Corporation; Product 3300: www.clopaydoor.com.

2. Wayne-Dalton, a Division of Overhead Door Corporation: www.wayne-dalton.com.

3. Raynor - Tri-Core II

4. Windsor Door - Model 2400

5. Midland Door - 3" ES

6. Substitutions: See Section 01 60 00 - Product Requirements.

2.02 STEEL DOOR COMPONENTS

A. Steel Doors: Flush steel, insulated; standard lift operating style with track and hardware; complying with DASMA 102, Commercial application. Metal/foam/metal sandwich panel construction, with EPDM thermal break and ship-lap design with rounded water channels. Units shall have the following characteristics:

1. Door Nominal Thickness: 2 inches thick.

2. Exterior Surface: Ribbed, textured.

3. Exterior Steel: 0.016 inch, hot dipped galvanized.

4. End Stiles: 16 gauge with thermal break.

5. Springs: High cycle, 75,000.

6. Insulation: CFC-free and HCFC-free polyurethane, fully encapsulated.

7. Exterior Finish: Factory finished with acrylic baked enamel; color as selected by Architect.

8. Interior Finish: Factory finished with acrylic baked enamel; color as selected from manufacturers standard line.

9. High Usage package required.

10. Full glazing requiring Aluminum Sash Panels: Insulated double strength glass.

11. Windload Design: ANSI/NAGDM 102 standards and as required by code.

12. Hardware: Galvanized steel hinges and fixtures. Ball bearing rollers with hardened steel races.

13. Weatherstripping: EPDM rubber tube seals fitted inside joints between sections. EPDM rubber bulb-type strip at bottom. Header seal and jamb weatherstripping.

14. Track: 3 inch galvanized track.

2.03 DOOR COMPONENTS

A. Track: Rolled galvanized steel, 0.090 inch minimum thickness; 2 inch wide, continuous one piece per side; galvanized steel mounting brackets 1/4 inch thick.

B. Hinge and Roller Assemblies: Heavy duty hinges and adjustable roller holders of galvanized steel; floating hardened steel bearing rollers, located at top and bottom of each panel, each side.

C. Lift Mechanism: Torsion spring on cross head shaft, with braided galvanized steel lifting cables.

1. For Manual Operation: Requiring maximum exertion of 25 lbs force to open.

D. Sill Weatherstripping: Resilient hollow rubber strip, one piece; fitted to bottom of door panel, full length contact.

E. Jamb Weatherstripping: Roll formed steel section full height of jamb, fitted with resilient weatherstripping, placed in moderate contact with door panels.

F. Head Weatherstripping: EPDM rubber seal, one piece full length.

G. Panel Joint Weatherstripping: Neoprene foam seal, one piece full length.

2.04 MATERIALS

A. Sheet Steel: Hot-dipped galvanized steel sheet, ASTM A653/A653M, with G60/Z180 coating, plain surface.

B. Insulation: Foamed-in-place polyurethane, bonded to facing.


2.05 ELECTRICAL OPERATION

A. Provide UL listed electric operator type as recommended by manufacturer for door conditions.

B. Electrical Characteristics:

1. 1/2 hp; manually operable in case of power failure, transit speed of not less than 8 inches per second.

2. 208 volts, three phase, 60 Hz.

3. Refer to Section 26 27 17 for electrical connections.

C. Wiring Terminations: Provide terminal lugs to match branch circuit conductor quantities, sizes, and materials indicated. Enclose terminal lugs in terminal box sized to NFPA 70.

D. Disconnect Switch: Factory mount disconnect switch in control panel.

E. Safety Edge: At bottom of door panel, full width; electro-mechanical sensitized type, wired to stop door upon striking object; hollow neoprene covered to provide weatherstrip seal.

F. Safety Sensors: Electronic eye type sensors mounted near the floor at each side of door, such that if the electric beam is interupted the door will not close.

G. Control Station: Standard three button (open-close-stop) momentary type control for each electric operator.

1. 24 volt circuit.

2. Surface mounted.

3. Locate at inside door jamb.

H. Hand Held Transmitter: Digital control, resettable.

1. Provide hand held transmitters for operating doors.

2. Transmitters shall be custom built with controls to operate each door independently.

3. Furnish 4 hand held transmitters.

PART 3 EXECUTION

3.01 EXAMINATION

A. Verify that wall openings are ready to receive work and opening dimensions and tolerances are within specified limits.

B. Verify that electric power is available and of the correct characteristics.

3.02 PREPARATION

A. Prepare opening to permit correct installation of door unit to perimeter air and vapor barrier seal.

3.03 INSTALLATION

A. Install door unit assembly in accordance with manufacturer's instructions.

B. Anchor assembly to wall construction and building framing without distortion or stress.

C. Securely brace door tracks suspended from structure. Secure tracks to structural members only.

D. Fit and align door assembly including hardware.

E. Coordinate installation of electrical service. Complete power and control wiring from disconnect to unit components.

F. Coordinate installation of sealants and backing materials at frame perimeter as specified in Section 07 90 05.

3.04 TOLERANCES

A. Maximum Variation from Plumb: 1/16 inch.

B. Maximum Variation from Level: 1/16 inch.

C. Longitudinal or Diagonal Warp: Plus or minus 1/8 inch from 10 ft straight edge.

D. Maintain dimensional tolerances and alignment with adjacent work.


3.05 ADJUSTING

A. Test sectional doors for proper operation without binding or distortion.

B. Adjust door assembly for smooth operation and full contact with weatherstripping.

C. Touch-up damaged coatings and finishes and repair minor damage. Clean exposed surfaces using non-abrasive materials and methods recommended by manufacturer of material or product being cleaned.

3.06 CLEANING

A. Clean doors and frames and glazing.

B. Remove temporary labels and visible markings.

3.07 PROTECTION

A. Protect installed products from damage until Date of Substantial Completion.

B. Clean doors, frames and glazing.

C. Remove temporary labels and visible markings.

D. Do not permit construction traffic through overhead door openings after adjustment and cleaning.

END OF SECTION

18131 / Bay Mills Health Center 13 09 00 - 1 LEAD LINED MATERIALS

SECTION 13 09 00

LEAD LINED MATERIALS

PART 1 GENERAL


A. Construction of lead enclosure around x-ray treatment rooms and control rooms.

1.02 RELATED REQUIREMENTS

A. Section 08 11 13 - Hollow Metal Doors and Frames.

B. Section 08 71 00 - Door Hardware.

C. Section 09 21 16 - Gypsum Board Assemblies: Joint taping over lead lined gypsum board.


A. ASTM C1396/C1396M - Standard Specification for Gypsum Board; 2013.

1.04 SYSTEM DESCRIPTION

A. Radiation Protection: Contain, without leakage, emitted radiation, measured at wall surface with device simulating the emitting equipment.

1.05 ADMINISTRATIVE REQUIREMENTS

A. Coordinate this work with the construction of the building elements that x-ray protection is applied to or installed in.

B. Preinstallation Meeting: Convene one week prior to commencing work of this section.

1.06 SUBMITTALS


B. Shop Drawings: Indicate layout, details, dimensions, interface with adjoining work, and any relative information.

C. Product Data: Provide data on leaded glass and Leaded Gypsum Wallboard.


A. Manufacturer Qualifications: Company specializing in manufacturing the Products specified in this section with minimum 5 years documented experience.

B. Installer Qualifications: Company specializing in performing the work of this section with minimum 5 years’ experience.

1.08 REGULATORY REQUIREMENTS

A. Conform to applicable health and occupation code for integrity of radiation protection and continuity of protected construction.

PART 2 PRODUCTS

2.01 MANUFACTURERS

A. X-Ray Radiation Protection:1. A & L Shielding Inc: www.alshielding.com.2. Mayco Industries, Inc: www.maycoindustries.com.3. Radiation Protection Products: www.radiationproducts.com.4. Ray-Bar Engineering Corp: www.raybareng.net.5. Substitutions: See Section 01 60 00 - Product Requirements.

2.02 SHEET LEAD AND ASSOCIATED MATERIALS

A. Gypsum Board: ASTM C1396/C1396M, paper/paper faced, square edges and square ends; 48 x 96 inch size, 1/2 inch thick or as indicated on drawings.

B. Lead-Laminated Gypsum Board: Single unpierced layer of sheet lead laminated to back of gypsum board, ÅSTM C 1396/1396M; gypsum core wall panel with additives to enhance fire resistance of core and surfaced with paper on front, back, and long edges; Type X, UL rated.

18131 / Bay Mills Health Center 13 09 00 - 2 LEAD LINED MATERIALS

C. Lead Equivalence: Thickness of lead that provides same attenuation (reduction of radiation passing through) as material in question under specified conditions. Lead equivalence specified for materials used in diagnostic X-Ray rooms is measured at 150 kV unless indicated otherwise

2.03 OTHER RELATED MATERIALS

A. *Lead line thickness to be verified with physicist report.1. Hollow Metal2. Door Hardware

PART 3 EXECUTION

3.01 EXAMINATION

A. Verify that existing surfaces are ready to receive work and opening dimensions are as indicated on shop drawings.

3.02 INSTALLATION - SHEET LEAD

A. Install lead sheets to wall substrate by mechanical attachments; lead headed fasteners spaced at 4 inches to framing members. Install lead laminated products with lead face against supports.

B. Install new frames in accordance with manufacturers instructions.

3.03 INSTALLATION - COMPONENTS AND ACCESSORIES

A. Install components and accessories in accordance with manufacturer's instructions.

END OF SECTION

A5.1

A5.1 4

3

N

9'-7" 9'-6" 11'-2"

9'-6" 9'-5" 9'-5" 11'-4" 12'-0"

5'-8"

9'-4" 10'-4" 12'-11 9/16"

COMMUNITYHEALTH

1063

COMMUNITYHEALTH

1064

PROVIDEROFFICE1094A

PROVIDEROFFICE1094B

NURSE1094

PROVIDEROFFICE1094C

PROVIDEROFFICE1094D

TRADITITIONALHEALING

1106

PLAYTHERAPY

1114

GROUPTHERAPY

1113

PROCEDUREHALWAY

1100

CONSULT1101

PROCEDUREROOM (POSPRESSURE)

1102

TOILET1103


1104

CLEAN1091

EXAM1088

EXAM1087

EXAM1086

SCALE1085

SOILED1092

EXAM1084

EXAM1083

EXAM (NEGPRESSURE)

1082

TRIAGE(NEG

PRESSURE)1081

MED1093

STAFFTOILET1070A

EXAM1079

EXAM1078

EXAM1077

TOILET1035

SCALE1076

EXAMHALLWAY

1070

FLEX OFFICE1075

EXAM1074

EXAM1073

EXAM1072

CONSULT1071

COMMUNITYHEALTH

(BRENDA)1060

COMMUNITYHEALTH

(THERESA)1059

COMMUNITYHEALTH

(GINA HE)1058

COMMUNITYHEALTH

(STEPHANIE)1057

C.H. WorkRoom1056

COMMUNITYHEALTH

(TRANSPORT)1055

COMMUNITYHEALTH

(CONNIE)1054

COMMUNITYHEALTH

(SHELBY)1053

COMMUNITYHEALTH

(JOANNT)1052

AMBULANCEHOLD (negpressure)

1051

MECH1042

C.H.HALLWAY

1050

PROCEDUREHALLWAY

1105

STAFFHALLWAY

1090

C.H.HALLWAY

1061

VEST.1038A

STAFFBREAKROOM1029

OFFICE1028

LAUNDRY1027

DATA1026

HALLWAY1024

HALLWAY1025

TOILET1033B

TOILET1033A

STAFFMOTHERS

ROOM1031

MAMMO1038

HOUSEKEEPING1030

RADIOLOGY1039

WAIT1036

STAFF WORK1037A

TOILET1040

CHANGE1039A

MOTHERSROOM1009

WOMENSTOILET1008

WAITING1007

MEN'STOILET1010

OPTICALSALES1153

WAITING1130 STAFF WORK

1132

HALLWAY1034A

EXAMHALLWAY

1080

HALLWAY1034B

DENTALWAIT1200

PRC(ASHLEY)

1014

PRC(MIKALA)

1015

PATIENTREG/

CONSULT1016

OUTREACH(CHELSEY)

1019

INSURANCE(SHELLEY)

1018SWITCHBOARD

1017

WORK1012

RE-APPOINT/PAYMENT

1011

CENTRALREGISTRATION

1013

JAN.1107

1A6.2

2A6.2

3A6.2

COMMUNITYHEALTH

1062

A7.1

1

A7.2

1

A7.3

1

A7.3

2

A7.3

4

A7.3

3

A7.3

5

A7.3 24

25

6'-0" 18'-8" 12'-8" 12'-8" 10'-0" 7'-10" 22'-3" 11'-11"

A7.5

8

NURSESUPERVISOR

(BETTY)1065

A7.6

1

A5.1

5

A7.3

6

6

MEETINGROOM1002

PHARMACYWORK1023

PHARMACYOFFICE1023A

PHARMACYCONSULT

1021

PHARMACYCONSULT

1022

PHARMACYWAITING1020B

PHARMACYRETAIL1020A

PHARMACYTOILET1023B

4'-6" 21'-4" 25'-10"

cr

AL-W1

8A6.2

6A6.2

tv wall

seating for 40

tv

tv

A7.74

NN NN

MM MM

1

1

2

2

3

3

4

4

5

5

6 7 10

10

15 16 21

21

22

22

24

24 26 27 28

29 30

31

LL

KK

JJ

II

HH

EE

DD

AA

Y

W

V

N

L

25

25

Q

P

M

A7.7 9

32

T

O

19181413

29

'-0

"1

6'-

0"

1'-

8"

REGISTRATIONHALL1003

VESTIBULE1001

HALLWAY1004

HALLWAY1005

HALL1037

1200B

1016A

11

10

A

1010

1101

11

02

1103A1103B

11

04

10

94

D

1106

11

17

11

07

1062

1063

1064

1055

10

54

10

53

10

52 1051

1041

10

41

A

10

38

A

10

56

10

57

10

60

10

59

10

58

1065

10

94

A

1075

10

94

10

74

10

73

10

72 1071

10

77

10

78

10

79

10

70

A

1093

1092

10

84

10

83

10

82

1081

1035

10

94

E

1094C

1091

10

88

10

87

10

86

1007B

1007A

1008

1037

1033B 1033A

10

31

10

38

1039

10

40

10

30

10

26

10

27

10

28

1033 1023

10

23

B

10

23

A1

02

2B

10

21

B1

02

1A

10

22

A

1002A

1020

10

17

10

18

10

19

1011

10

14

10

15

10

16

1200

1094B

10

38

B

10

02

1009

10

14

A

10

15

A

10

24

9'-6" 9'-6" 9'-6" 11'-2" 12'-0"

13

'-6

"8

'-6

"8

'-6

"9

'-3

"9

'-3

"

7B

5A

7A

5A

5B

5A

5'-

6"

15

'-3

"7

'-8

"5

'-6

"7

'-8

1/2

"7

'-9

1/1

6"

7'-

8 1

/2"

5'-

6"

14

'-0

"9

'-2

"5

'-6

"1

1'-

7"

5'-

11

"1

1'-

1"

F.E.C.

7A

5A 5A

5A

5A 5A 5B 7B

5B

5A

5A 5A 5A

7A

7A

5A 5A 5A 5A 7A

5A

CL

1'-6"

CL

1'-6"

CL

1'-6"

F.E.C.

CL

1'-6"CL

1'-6"

CL

1'-6"

5A

7A

7A

5A 5A

5A 5ACL

1'-6"

CL

1'-6"

CL

1'-6"

CLR4 7/8"

11'-1" 5'-7" 9'-6" 9'-6" 9'-6" 9'-6" 13'-8"

5'-8"

A7.3

34

STORAGE1002A

Hall1006

HALLWAY1007A

HALLWAY1007B

Bio Hazard1043

10

42

A1

04

2

1043

11'-1" 5'-7" 36'-7" 14'-6" 6'-7"

5'-

0"

STORAGE1041

10

19

A

10

18

A

10

21

C

GG

FF

BB

S

8

8

12

4'-0" 56'-0" 21'-8" 18'-4" 77'-8" 24'-8"

13'-4" 3'-4" 14'-6" 20'-10" 4'-0" 4'-10" 6'-4" 3'-2" 3'-10" 3'-6"

1'-8" 26'-2" 26'-6" 1'-8"4"

19'-8" 1'-8" 16'-8" 1'-8" 34'-0" 19'-8" 22'-4" 1'-8" 23'-8"1'-0"

3'-4" 12'-0" 3'-0" 5'-4" 4'-0" 4'-0" 4'-0" 14'-4" 24'-0" 4'-0" 8'-0" 4'-0" 6'-0"

21

'-0

"1

8'-

0"

27

'-0

"3

8'-

0"

2'-

0"

24

'-8

"

6'-

0"

4'-

0"

4'-

8"

7B

A5.12

3'-

0"

13

'-0

"1

'-8

"1

'-4

"4

'-0

"3

'-8

"4

'-0

"3

'-8

"7

'-0

"2

'-0

"7

'-0

"4

'-0

"7

'-0

"2

'-0

"7

'-0

"3

'-1

0"

4'-

0"

4'-

0"

4'-

0"

7'-

0"

4'-

0"

6'-

0"

4'-

0"

4'-

6"

4'-

0"

5'-

0"

4'-

0"

12

'-0

"1

'-8

"

14

'-8

"6

'-0

"2

8'-

8"

28

'-8

"2

8'-

8"

28

'-8

"

14

'-8

"1

20

'-8

"

1106A

N

/1 A2.2 /1 A2.2

1'-

8"

1A6.1

4A6.1

2A6.1

1039A

cr

cr

7B

5B

5B

7B

5A

11

'-7

"1

1'-

7"

5'-

6"

11

'-7

"1

1'-

7"

5'-

6"

11

'-7

"1

7'-

8 7

/8"

9'-

8"

CL

1'-6"

CL

1'-6"

CL

1'-6"

7A

7A

5A

5A 5A

7A

5A

5A

CL4'-0"

5A5A

5A

8'-

0"

8'-

0"

19

'-4

"1

9'-

4"

8'-

0"

8'-

4 1

1/1

6"

12

'-6

5/8

"

CLR

1'-

9"

CLR1'-0"

CLR

1'-

0"

CLR

1'-

0" 3

'-2

"

5A

5B 5A

5A

5A

7A

5A

7B 5B

A7.7

1

20

'-6

"8

'-1

"5

'-7

"

24'-8"

CLR

1'-

0" CLR

1'-0"

AL-W3 AL-W7 AL-W6

AL-

W3

AL-

W3

AL-

W3

AL-

W3

AL-W4 AL-W4

2'-

5"

CLR

2'-

0"

CLR

12

'-1

0"

CLR

2'-

0"

CLR

7'-

0"

CLR

7'-

0"

CLR

2'-

0"

CLR

12

'-1

0"

CLR

2'-

0"

EQ

EQ

7A4A

7E

4A

7A

7A 5A

7A

7A

5A

5A7A

7A

7A

5A

5A

7A

7A

42

'-0

"

135°135°

9'-0" 51'-0"

5'-6 3/4" 5'-0" 5'-6 3/4"

5A

7A

7A

5'-

4"

5A

7B

5B

5B

5A

1'-

8"

AL-

W1

0

AL-W

4A

L-W

8A

L-W

8A

L-W

4

AL-W

9

AL-

W2

AL-

W2

AL-

W2

AL-

W2

AL-

W2

AL-

W2

AL-

W5

AL-

W5

AL-

W5

AL-

W5

AL-

W2

AL-

W2

AL-

W2

HM

-W5

6A6.1

A5.17

AL-W2 AL-W2

7A6.2

10A6.2

11A6.2

A7.712

A7.3

15

16

77'-8"

25'-4"

A7.7 8

A7.7 10

1

MATCHLINEMATCHLINE

5'-

7"

5'-

10

3/4

"

11'-6"CLR

6'-1" 6'-7 1/8"

14'-10" 6'-2" 13'-1"

8'-

2"

6'-0" 5'-1"

6'-0" 5'-1"

11'-1" 5'-7" 16'-0" 7'-8" 16'-0"

2'-

4"

9'-

0"

11

'-7

"5

'-6

"1

1'-

7"

11

'-7

"

7'-

1"

9'-

0"

7'-

1"

7'-5" 5A5A

5A

5A5A

7A

5A

7A

7A

2A

12'-0"

12'-4"

8'-

0"

4A4A

8'-4"

3'-6"

6'-7 5/16"

2'-2 1

3/16"

8'-6 1/16"

12'-4"

12'-0"

8'-

0"

7'-

1 1

/8"

5'-

8 7

/8"

CLR

4'-0" 10'-6" CLR 10'-1 1/8" CLR

7'-8" 6'-0" 8'-6"

8'-

0"

7'-

1"

5'-

9"

13

'-0

"

7'-3" 7'-2" 8'-0" 11'-5" 14'-6"

5'-1" 4'-5" 4'-11"

5'-

6"

5'-

4"

2'-

2"

12'-6 9/16" CLR

3'-3"

5'-

7"

14

'-3

7/8

"

9'-

0"

9'-

0"

17

'-2

"9

'-1

0"

8'-

5"

7'-

0"

11

'-7

"9

'-0

"9

'-0

"7

'-4

"1

2'-

0"

6'-

5 1

/4"

9'-

6 3

/4"

12

'-0

"7

'-4

"

10'-6 13/16" 7'-2 1/4" 4'-4 11/16" 7'-2 1/4" 9'-4 1/2" 3'-3 1/2"

cr cr

cr

cr

cr

cr

cr

cr cr

cr

cr cr

cr

cr

cr

cr cr

11

38

11

39

6'-0" CLR

5 13/16"8 1/2"

26

'-8

3/8

"

1'-0"

1153

cr

cr

A4.2

5

10

13

6'-7" 6'-7"

4

A4.2A4.2

7

A4.2

6

1020A 1020B

MH

-W7

MH

-W7

2'-4 15/16" 12'-11 1/4"

A7.7

11

A7.7

11

WCG

WCG

A7.118

A7.1

19

2

2

2AD

D

2 2

2AD

D

2AD

D

Wall Types

5A

3 5/8" METAL STUD @ 16" O.C.

5/8" GYP.BD. EA. SIDE

BATT INSULATION

METAL STUD WALL TO STRUCTURE

5BMETAL STUD WALL TO STRUCTURE-

SMOKE PARTITION

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD

3 5/8" METAL STUD CHANNEL

3 5/8" METAL STUD DEFLECTION TRACK

BASE - SEE SCHEDULE

ROOF OR FLOOR STRUCTURE

CLG; SEE SCHEDULE

5F

3 5/8" METAL STUD @ 16" O.C.BATT INSULATION

1-HR RATED METAL STUD WALL TO STRUCTURE

(UL# U465) (STC 50)

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


5/8" GYP.BD.

4A

3 5/8" METAL STUD @ 16" O.C.

5/8" GYP.BD.


SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

2A

1 5/8" METAL STUD @ 16" O.C.

5/8" GYP.BD.

FURRING OVER EXISTING WALL TO STRUCTURE

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

7A

6" METAL STUD @ 16" O.C.

BATT INSULATION


SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD

6" METAL STUD CHANNEL

6" METAL STUD DEFLECTION TRACK

BASE - SEE SCHEDULE


5/8" GYP.BD.

7F


BATT INSULATION

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


5/8" GYP.BD.


CLG; SEE SCHEDULE

6A

3 5/8" METAL STUD @ 16" O.C.

(2) LAYERS 5/8" GYP.BD. EA. SIDE

BATT INSULATION

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

2-HR RATED METAL STUD WALL TO STRUCTURE (UL# U411) (STC 56)

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD

6" CMU

BASE - SEE SCHEDULE


6" CMU BOND BEAM -SEE STRUCT.

8A CONCRETE MASONRY UNIT w/FURRING

LADDER REINFORCEMENT EVERY OTHER COURSE; UNO

3A

2 1/2" METAL STUD @ 16" O.C.

5/8" GYP.BD.


SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD


BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

1 5/8" METAL STUD @ 16" O.C.

5/8" GYP.BD.



CLG; SEE SCHEDULECLG; SEE SCHEDULE


ACOUSTIC SEALANTACOUSTIC SEALANT EA. SIDE

ACOUSTIC SEALANT EA. SIDE



ACOUSTIC SEALANTACOUSTIC SEALANTACOUSTIC SEALANT

ACOUSTIC SEALANT

CLG; SEE SCHEDULE

NOTE: ALL WALLS SHALL BE BUILT TO STRUCTURE ABOVE UNLESS OTHERWISE NOTED

5A

2 1/2" METAL STUD @ 24" O.C.

(2) LAYERS 1/2" FIRE-RATED GYP.BD.

2-HOUR FIRE-RATED CHASE WALL UL# U415

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

1" GLASS-MAT GYP. BD. LINER PANEL

SHAFT SIDE

2 1/4" 3 1/8" 4 1/4" 4 1/2"


4 7/8" 4 7/8" 6 1/8" 7 1/4" 6 5/8"7 7/8"

5COMIT BATT INSULATION


SMOKE PARTITION

5DMETAL STUD WALL TO

STRUCTURE-

SMOKE PARTITIONLEAD LINED

5EMETAL STUD WALL TO STRUCTURE-

LEAD LINED

7CMETAL STUD WALL TO STRUCTURE-

LEAD LINED

7DOMIT BATT INSULATION

7E


(UL# U465) (STC 50)

7F

1 HR RATED METAL STUD

WALL TO STRUCTURE-RC

CHANNELS SYMBOL SIDE

(UL# U465)

Floor Plan Key

south

north

N

ÉåêáÅÜáåÖÅçããìåáíáÉëíÜêçìÖÜ~êÅÜáíÉÅíìêÉ

ÇìäìíÜ=G=îáêÖáåá~G=íïáå=ÅáíáÉë

ïïïKÇëÖïKÅçã

Çê~ïå=ÄóW

ÅÜÉÅâÉÇ=ÄóW

íóéÉÇLéêáåíÉÇ=å~ãÉW

êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

Rebecca J Lewis, FAIA, FACHA, CID

1301056849

ëÜÉÉí=íáíäÉW

ëÜÉÉí=åìãÄÉêW

8/20/2020 3:30:20 PM

018131.00

JMD

RJL

07/06/2020

Bay MillsHealthCenter12455 W. Lakeshore DriveBrimley, Michigan 49715

A2.1

Floor Plan-South

Floor Plan Notes1 WALL-MOUNTED TV LOCATION (EQUIP. BY OWNER.)

2 Provide continuous FRP-1 panel to 4'-4" A.F.F.

Floor Plan General NotesA Interior dimensions are to finished face of stud wall, face of masonry

walls, to centerline of columns or to other grid points unless otherwisenoted. Dimensions labeled as CLEAR or CLR indicate minimum distance tofinished face of walls. Dimensions are to finished face of existing walls ifapplicable.

B All interior door frames to be 2" from adjacent wall or centered betweenwalls unless otherwise noted.

C Furniture & equipment shown is for reference only and is not included inthe contract.

D Coordinate size and location of all duct and shaft openings in walls andfloors with MEP consultant.

E Fire rated walls are indicated on the Life Safety Plan.

1/8" = 1'-0"1

Level 1 Floor Plan -South

êÉîáëáçå=LáëëìÉ åçK Ç~íÉ

^aa O OMOMLMULOM

11'-1" 5'-7" 10'-4" 10'-4" 10'-4" 10'-4" 10'-4"

5'-8"


1106

OFFICE1118

OFFICE1119

OFFICE1120

OFFICE1121

OFFICE1122

OFFICE1123

OFFICE1124

OFFICE1125

OFFICE1126

Storage1111OFFICE

1112OFFICE1115

OFFICE1116

PLAYTHERAPY

1114

STORAGE1114A

GROUPTHERAPY

1113

B.H.HALLWAY

1110

PROCEDUREHALWAY

1100

B.H.HALLWAY

1117

MEN'STOILET1010

OPTICALSALES1153

DRAW1133

WAITING1130 STAFF WORK

1132

LAB HALL1131

SPECIMENTOILET1131A

SPECIMENTOILET1131B

TOILET1137

LAB1134

LAB OFFICE1135

WORKROOM1151

CONTACTS1152

OPTICALHALLWAY

1150

OPTICALEXAM1154

OPTICALEXAM1155

HALLWAY1034C

HALLWAY1140

HALLWAY1142

MEETING1143

MEETING1144

H.I.M1160

REFERENCE1161

VISITATION1162

TOILET1145

ADMINOFFICE(ABBY)1172

ADMINOFFICE

(YVONNE)1173

ADMINOFFICE

(AUDREY)1174

ADMINOFFICE(TARA)1175

ADMINOFFICE(DAN)1176

BILLINGOFFICE

(ASHLEY)1177

HIM OFFICE(ANDREW)

1178

BILLING1171

BILLINGHALLWAY

1170

MECH.1223

DENTALOFFICE1217

DENTALOFFICE1218

DENTALEXAM1216

DENTALEXAM1215

LOCKERS1222

MECHROOM1221

TOILET1220

LAB OFFICE1210A

LAB1210

TOILET1209

STERILIZATION1208

DENTALHALLWAY

1207

PAN1205

PANOPERATOR

1202A

DENTALRECORDS

1203

DENTALCONSULT

1201

DENTALWAIT1200

DENTALRECEPTION

1204

DENTALEXAM1214

DENTALEXAM1212

DENTALEXAM1211

DENTALHALLWAY

1202

DENTALHALLWAY

1219

JAN.1107

5A6.2

A7.3 31

A7.3 3332

A7.4

1

A7.5

2

A7.5

1

A7.3

6

A5.1

1

4'-6" 21'-4" 25'-10"

42"42"

IT1136

1'-8"2'-4"1'-8" 3'-4" 3'-10" 4'-6" 4'-0" 4'-0" 4'-0" 6'-6" 4'-0" 6'-6" 4'-0" 6'-0" 4'-0" 5'-8" 4'-0" 4'-0"

5'-4"

3'-

6"

4'-

0"

5'-

6"

4'-

0"

9'-

6"

5'-

6"

4'-

0"

6'-

8"

4'-

0"

8'-

4"

1'-

8"

4A6.2

1

1

2

2

3

3

4

4

5

5 9

11

11

17

17 20

21

21

22 24 26

26

N

L

B B

A A

25

25

M

G

H

D

C

O

1'-

8"

27

'-8

"2

0'-

0"

20

'-0

"2

0'-

0"

19

'-8

"1

'-8

"

12

02

1217

1218

1216B

1216A

1215B

12

20

1215A

1209

1203

12

01

B1

20

1A

1200B

11

10

A

1207

11

70

12

22

12

21

12

23

11

78

11

77

11

75

11

76

1174

1173

1172

11

42

1145

1144

1160

1143

11

61

B1

16

1A

11

35

B

1135A

11

50

1155

1152

1154

1010

1106

11

17

11

07

11

14

11

13

1113A

1136

11

11

11

12

11

26

11

25

11

24

11

15

11

16

11

23

11

22

1121

1120

1119

1118

1131A1

13

1B

1133

11

34

sla

t w

all

11

62

B1

16

2A

1137

1114A

1110

1200

A7.3

34 HALLWAY1007B

HALLWAY1141

DENTALEXAM1213

1140

1219

12

04

10

34

K

F F

E E

8

8

23

23

I

5'-

4"

4'-

0"

5'-

0"

4'-

0"

6'-

6"

4'-

0"

5'-

6"

4'-

0"

3'-

0"

1106A

/1 A2.1

1'-

8"

29

'-8

"1

0'-

0"

1'-

8"

41

'-4

"

1'-

8"

9'-

8"

1'-

8"

16

'-4

"2

0'-

0"

15

'-4

"

11

'-4

"5

3'-

4"

/1 A2.1

5'-0" 4'-0" 8'-0" 4'-0" 6'-0" 4'-0" 6'-6" 4'-0" 6'-0" 4'-0"

1'-6"

19'-0" 4'-0" 3'-0" 3'-4" 17'-8"

5'-8" 73'-8" 53'-0" 47'-0"

1'-8"2'-4"1'-8" 26'-2" 28'-6" 19'-0" 1'-8" 25'-6" 25'-10" 1'-8" 23'-6" 20'-2" 1'-8"

9A6.2

CLR

1'-

0" 3

'-2

"

5A

5B 5A

5A

5A7A 5A 5A

7A

5A

7A

7A

9'-

10

"1

0'-

2"

10

'-3

"1

0'-

5 1

1/1

6"

11

'-9

"5

'-6

"1

2'-

5"

8'-

6"

5'-

4"

11'-1" 5'-7" 10'-4" 10'-4" 10'-4" 10'-4" 10'-4" 6'-0" 7'-8" 14'-2" 11'-0" 5'-6" 10'-0" 5'-8" 13'-9" 9'-9" 6'-3 5/8" 14'-3 1/4"

6'-

9 9

/16

"5

'-6

1/4

"1

3'-

10

"

7A

5A

5A

5A

7A5A 5A5A 5A

5A7A

5A

5A

7A5A 5A

5A

5B

5B

7B7A

5B 7B

7B5A

7A

7A

5A

7B

5B

5B

5A

7A

3'-4"

EQ

EQ

3'-

8"

6'-

0"

8'-

0"

6'-

0"

6'-

0"

6'-

0"

4'-

0"

6'-

0"

4'-

0"

6'-

0"

4'-

0"

6'-

0"

4'-

0"

6'-

0"

4'-

0"

6'-

0"

4'-

0"

6'-

0"

4'-

0"

6'-

0"

1'-

8"

AL-

W2

AL-

W2

AL-

W2

AL-

W2

AL-W2 AL-W2 AL-W2 AL-W2 AL-W2 AL-W2 AL-W2

AL-

W2

AL-

W2

AL-

W2

AL-

W2

AL-

W2

AL-W2 AL-W2 AL-W2 AL-W2 AL-W2

AL-W6

AL-

W1

0A

L-W

10

AL-

W1

0A

L-W

10

AL-

W1

0A

L-W

10

AL-

W1

0A

L-W

10

AL-

W1

0A

L-W

10

HM

-W5

1140A

10A6.2

MED GAS1221A

12

21

A

A7.7 8

179'-4"

11

0'-

8"

J

5'-

0"

MIN

.

5'-

0"

MIN

.

6'-0" 7'-0" 8'-10"

11'-11" 10'-1" 10'-1" 10'-1" 9'-2"

10

'-1

0"

5'-

6"

2'-

9"

13

'-3

"2

4'-

0"

8'-6" 6'-7" 6'-0 3/8" 4'-0" 4'-7 1/4"

11'-11" 6'-0" 7'-7" 21'-10" 5'-8" 23'-6" 6'-3 5/8" 13'-10 3/8"

16

'-4

"1

0'-

0"

10

'-0

"9

'-1

0"

10

'-2

"

3'-6"

12

'-1

1"

12

'-1

1"

12

'-8

"

5'-

7"

5'-

5"

9'-

6"

6'-

10

"9

'-6

"

7'-

3"

6'-

6"

10

'-3

"

7'-6" 14'-5" 7'-6" 5'-8" 8'-8" 14'-10"

1208B

12

08

A

1210

7'-0" 8'-8" 7'-10"

5'-

10

3/4

"9

'-3

"9

'-2

"5

'-4

7/8

"3

'-1

1/8

"8

'-5

"7

'-8

"7

'-1

"7

'-3

"8

'-4

"7

'-7

"

11

'-5

"

11'-6"

11'-0" 1'-0"

2'-

1"

CL

15'-4 7/16"

6'-6 1/16" 13'-7 15/16"

8A

8A

8A

CLR

6'-1" 6'-7 1/8"

14'-10" 6'-2" 13'-1" 4'-9"8

'-2

"6

'-0

"7

'-7

"1

5'-

1"

7'-

7"

7'-

6"

10

7'-

8"

MATCHLINEMATCHLINE

4A4A

cr

cr

cr

cr

cr

cr

cr

cr

cr

cr

9'-

11

5/8

"

13

'-8

"1

4'-

0"

20

'-0

"2

0'-

0"

20

'-0

"2

0'-

4 1

/2"

9'-

0"

9'-

4"

9'-

4"

7'-10"

6'-0" CLR

1153

cr

cr

cr

5'-

0"

A7.5

18

19

A7.520

1147

2

2

F.E.C.

2AD

D

Wall Types

5A

3 5/8" METAL STUD @ 16" O.C.

5/8" GYP.BD. EA. SIDE

BATT INSULATION



SMOKE PARTITION

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

5F

3 5/8" METAL STUD @ 16" O.C.BATT INSULATION


(UL# U465) (STC 50)

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


5/8" GYP.BD.

4A

3 5/8" METAL STUD @ 16" O.C.

5/8" GYP.BD.


SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

2A

1 5/8" METAL STUD @ 16" O.C.

5/8" GYP.BD.


SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

7A


BATT INSULATION


SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


5/8" GYP.BD.

7F


BATT INSULATION

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


5/8" GYP.BD.


CLG; SEE SCHEDULE

6A

3 5/8" METAL STUD @ 16" O.C.

(2) LAYERS 5/8" GYP.BD. EA. SIDE

BATT INSULATION

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

2-HR RATED METAL STUD WALL TO STRUCTURE (UL# U411) (STC 56)

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD

6" CMU

BASE - SEE SCHEDULE


6" CMU BOND BEAM -SEE STRUCT.

8A CONCRETE MASONRY UNIT w/FURRING

LADDER REINFORCEMENT EVERY OTHER COURSE; UNO

3A

2 1/2" METAL STUD @ 16" O.C.

5/8" GYP.BD.


SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD


BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

1 5/8" METAL STUD @ 16" O.C.

5/8" GYP.BD.



CLG; SEE SCHEDULECLG; SEE SCHEDULE


ACOUSTIC SEALANTACOUSTIC SEALANT EA. SIDE




ACOUSTIC SEALANTACOUSTIC SEALANTACOUSTIC SEALANT

ACOUSTIC SEALANT

CLG; SEE SCHEDULE

NOTE: ALL WALLS SHALL BE BUILT TO STRUCTURE ABOVE UNLESS OTHERWISE NOTED

5A

2 1/2" METAL STUD @ 24" O.C.

(2) LAYERS 1/2" FIRE-RATED GYP.BD.

2-HOUR FIRE-RATED CHASE WALL UL# U415

SECTION @ FLOOR

PLAN VIEW

SECTION @ HEAD



BASE - SEE SCHEDULE


CLG; SEE SCHEDULE

1" GLASS-MAT GYP. BD. LINER PANEL

SHAFT SIDE

2 1/4" 3 1/8" 4 1/4" 4 1/2"


4 7/8" 4 7/8" 6 1/8" 7 1/4" 6 5/8"7 7/8"

5COMIT BATT INSULATION


SMOKE PARTITION

5DMETAL STUD WALL TO STRUCTURE-

SMOKE PARTITIONLEAD LINED

5EMETAL STUD WALL TO STRUCTURE-

LEAD LINED

7CMETAL STUD WALL TO STRUCTURE-

LEAD LINED

7DOMIT BATT INSULATION

7E


(UL# U465) (STC 50)

7F

1 HR RATED METAL STUD WALL TO STRUCTURE-RC CHANNELS SYMBOL SIDE(UL# U465)

Floor Plan Key

south

north

N




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W


1301056849



8/20/2020 3:30:23 PM

018131.00

JMD

RJL

07/06/2020


A2.2

Floor Plan-North

1/8" = 1'-0"1

Level 1 Floor Plan - North


^aa O OMOMLMULOM

Floor Plan Notes1 WALL-MOUNTED TV LOCATION (EQUIP. BY OWNER.)

2 Provide continuous FRP-1 panel to 4'-4" A.F.F.




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W


1301056849



8/18/2020 9:27:42 AM

018131.00

Author

Checker

07/06/2020


A4.1

Room FinishSchedules

ROOM FINISH SCHEDULE

NO. NAME

FLOOR WALL FINISH CEILING

NOTESFINISH BASE NORTH EAST SOUTH WEST MAT'L FINISH1090 STAFF HALLWAY LVT-1/ LVT-2B RB PAINT PAINT PAINT PAINT SACT-1 ---

1091 CLEAN SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---

1092 SOILED SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---

1093 MED SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---

1094 NURSE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1094A PROVIDER OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1094B PROVIDER OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1094C PROVIDER OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1094D PROVIDER OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1100 PROCEDURE HALWAY LVT-1/LVT-2A RB PAINT PAINT PAINT PAINT SACT-1

1101 CONSULT CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1102 PROCEDURE ROOM (POSPRESSURE)

SV-1 SV-1 COVE PAINT/ FRP-1 PAINT/ FRP-1 PAINT/FRP-1 PAINT SACT-2 --- FRP to 4'-4" A.F.F.

1103 TOILET SV-1 SV-1 COVE CT-5/PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1104 PROCEDURE ROOM (POSPRESSURE)

SV-1 SV-1 COVE PAINT/FRP-1 PAINT PAINT/FRP-1 PAINT/ FRP-1 SACT-2 --- FRP to 4'-4" A.F.F.

1105 PROCEDURE HALLWAY LVT-1/ LVT-2B RB PAINT PAINT PAINT PAINT SACT-1 ---

1106 TRADITITIONAL HEALING CT-1 WOOD PAINT PAINT PAINT PAINT EXPOSED WOOD/GYP. BD.

---/ PAINT

1107 JAN. SV-1 SV-1 COVE FRP-2 FRP-2 FRP-2 FRP-2 SACT-2 ---

1110 B.H. HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1111 Storage LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1112 OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1113 GROUP THERAPY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1114 PLAY THERAPY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1114A STORAGE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1



1117 B.H. HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1










1130 WAITING LVT-1/ LVT-2A RB PAINT PAINT PAINT PAINT SACT-3 SACT-3

1131 LAB HALL LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1131A SPECIMEN TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1131B SPECIMEN TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1132 STAFF WORK SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---

1133 DRAW SV-1 SV-1 COVE PAINT/ FRP-1 PAINT/ FRP-1 PAINT/ FRP-1 PAINT SACT-2 ---

1134 LAB SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---

1135 LAB OFFICE SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---

1136 IT LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1137 TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1140 HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---



1143 MEETING CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1144 MEETING CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---


1150 OPTICAL HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1151 WORKROOM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1152 CONTACTS LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1153 OPTICAL SALES LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1154 OPTICAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1155 OPTICAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1160 H.I.M CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1161 REFERENCE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1162 VISITATION CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1170 BILLING HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1171 BILLING CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1172 ADMIN OFFICE (ABBY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1173 ADMIN OFFICE (YVONNE) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1174 ADMIN OFFICE (AUDREY) LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1175 ADMIN OFFICE (TARA) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1176 ADMIN OFFICE (DAN) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1177 BILLING OFFICE (ASHLEY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1178 HIM OFFICE (ANDREW) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1200 DENTAL WAIT LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1201 DENTAL CONSULT LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1202 DENTAL HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1202A PAN OPERATOR LVT-1 RB PAINT --- PAINT PAINT SACT-1

1203 DENTAL RECORDS CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1204 DENTAL RECEPTION CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1205 PAN LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1207 DENTAL HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1208 STERILIZATION SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-1 ---


1210 LAB SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-1 ---

1210A LAB OFFICE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1211 DENTAL EXAM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---




1215 DENTAL EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-1

1216 DENTAL EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-1

1217 DENTAL OFFICE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1218 DENTAL OFFICE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1219 DENTAL HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1


1221 MECH ROOM SEAL. CONC. RB PAINT PAINT PAINT PAINT SACT-1 ---

1221A MED GAS SEAL. CONC. RB PAINT PAINT PAINT PAINT SACT-1

1222 LOCKERS LVT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---

1223 MECH. SEAL. CONC. RB PAINT PAINT PAINT PAINT EXPOSED PAINT

ROOM FINISH SCHEDULE

NO. NAME

FLOOR WALL FINISH CEILING

NOTESFINISH BASE NORTH EAST SOUTH WEST MAT'L FINISH1001 VESTIBULE CT-1 CT-1 PAINT PAINT PAINT PAINT SACT-3

1002 MEETING ROOM CPT-1 WOOD PAINT PAINT PAINT PAINT EXPOSED WOOD

1002A STORAGE CPT-1 RB PAINT PAINT PAINT PAINT SACT-1

1003 REGISTRATION HALL CT-1 WOOD PAINT PAINT PAINT PAINT SACT-4/ GYP. BD./EXPOSED WOOD

---/ PAINT

1004 HALLWAY CT-1/ CT-2 WOOD PAINT PAINT PAINT PAINT SACT-3/ GYP. BD. ---/ PAINT

1005 HALLWAY CT-1/ CT-2 WOOD PAINT PAINT PAINT PAINT SACT-3/ GYP. BD. ---/ PAINT

1006 Hall CT-1 WOOD PAINT PAINT PAINT PAINT SACT-4/ SACT-3/GYP. BD.

---/ PAINT

1007 WAITING CT-1/ CPT-1 WOOD PAINT PAINT PAINT WOOD/ CT-3 EXPOSED WOOD/GYP. DB.

---/ PAINT

1007A HALLWAY CT-1 WOOD PAINT PAINT --- PAINT SACT-1 ---

1007B HALLWAY CT-1 WOOD PAINT PAINT --- PAINT SACT-1 ---

1008 WOMENS TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1009 MOTHERS ROOM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1010 MEN'S TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1011 RE-APPOINT/ PAYMENT CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1012 WORK CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1013 CENTRAL REGISTRATION CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1014 PRC (ASHLEY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1015 PRC (MIKALA) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1016 PATIENT REG/ CONSULT CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1017 SWITCHBOARD CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1018 INSURANCE (SHELLEY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1019 OUTREACH (CHELSEY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1020A PHARMACY RETAIL LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1020B PHARMACY WAITING LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1021 PHARMACY CONSULT SV-1 RB PAINT PAINT PAINT PAINT SACT-1

1022 PHARMACY CONSULT SV-1 RB PAINT PAINT PAINT PAINT SACT-1

1023 PHARMACY WORK LVT-1 RB PAINT PAINT PAINT PAINT SACT-1/ GYP. BD. ---/ PAINT

1023A PHARMACY OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1

1023B PHARMACY TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1024 HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1025 HALLWAY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1026 DATA SV-1 RB PAINT PAINT PAINT PAINT EXPOSED PAINT

1027 LAUNDRY CPT-1 RB PAINT PAINT PAINT PAINT SACT-1 ---


1029 STAFF BREAK ROOM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1030 HOUSEKEEPING SV-1 RB PAINT PAINT PAINT PAINT SACT-2 ---

1031 STAFF MOTHERS ROOM LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1033A TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1033B TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1034A HALLWAY LVT-1/ LVT-2 RB PAINT PAINT PAINT PAINT SACT-3

1034B HALLWAY LVT-1/ LVT-2 RB PAINT PAINT/ WOOD PAINT PAINT SACT-3/ SACT-4/GYP. BD.

---/ PAINT

1034C HALLWAY LVT-1/ CT-1 RB PAINT PAINT PAINT PAINT SACT-3


1036 WAIT LVT-1/ LVT-2A RB PAINT PAINT PAINT PAINT SACT-3 SACT-3

1037 HALL LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1037A STAFF WORK LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1038 MAMMO LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1038A VEST. CT-1 CT-1 PAINT PAINT PAINT PAINT SACT-1

1039 RADIOLOGY LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1039A CHANGE LVT-1 RB PAINT PAINT PAINT PAINT SACT-1


1041 STORAGE SEAL. CONC. RB PAINT PAINT PAINT PAINT EXPOSED PAINT

1042 MECH SEAL. CONC. RB PAINT PAINT PAINT PAINT EXPOSED PAINT

1043 Bio Hazard SEAL. CONC. RB PAINT PAINT PAINT PAINT EXPOSED PAINT

1050 C.H. HALLWAY LVT-1/LVT-2A RB PAINT PAINT PAINT PAINT SACT-1 ---

1051 AMBULANCE HOLD (negpressure)

SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---

1052 COMMUNITY HEALTH (JOANNT) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1053 COMMUNITY HEALTH (SHELBY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1054 COMMUNITY HEALTH (CONNIE) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1055 COMMUNITY HEALTH(TRANSPORT)

CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1056 C.H. Work Room LVT-1 RB PAINT PAINT PAINT PAINT SACT-1

1057 COMMUNITY HEALTH(STEPHANIE)

CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1058 COMMUNITY HEALTH (GINA HE) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1059 COMMUNITY HEALTH (THERESA) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1060 COMMUNITY HEALTH (BRENDA) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1061 C.H. HALLWAY LVT-1/ LVT-2B RB PAINT PAINT PAINT PAINT SACT-1 ---

1062 COMMUNITY HEALTH CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---



1065 NURSE SUPERVISOR (BETTY) CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1070 EXAM HALLWAY LVT-1/LVT-2A RB PAINT PAINT PAINT PAINT SACT-1 ---

1070A STAFF TOILET CT-4 METAL TRIM CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT CT-5/ PAINT SACT-2 ---

1071 CONSULT CPT-2 RB PAINT PAINT PAINT PAINT SACT-1 ---

1072 EXAM SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---



1075 FLEX OFFICE CPT-2 RB PAINT PAINT PAINT PAINT SACT-1

1076 SCALE LVT-2A RB PAINT PAINT PAINT PAINT SACT-1




1080 EXAM HALLWAY LVT-1/LVT-2A RB PAINT PAINT PAINT PAINT SACT-1 ---

1081 TRIAGE (NEG PRESSURE) SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---

1082 EXAM (NEG PRESSURE) SV-1 SV-1 COVE PAINT PAINT PAINT PAINT SACT-2 ---



1085 SCALE LVT-2A RB PAINT PAINT PAINT PAINT SACT-1





^aa O OMOMLMULNU

2AD

D

PROVIDEROFFICE1094A

PROVIDEROFFICE1094B

NURSE1094

8'-

0"

8'-

0"

CL

1'-

10

"

CL

1'-0"

CL

5'-4"

45°

5'-1"

1094B

10

94

A

7A

5A

5A

5A

5A

5A

2A

CL

1'-0"

CL

1'-

4"

HM

-W7

10

94

11'-5 7/8"

1'-

3 5

/16

"

1'-3 5/16"

SOILED1092

MED1093

STAFFTOILET1070A

A7.3

7

A7.3 8

A7.3 9

7'-5"

7'-

1"

9'-

0"

7'-

1"

9'-5"

7B

5B

7B

5A

5B

5A

5A

5A

10

70

A

4A

4A5A

5A 4A

5A

1093

2'-

4"

4'-

9"

1092

7B

F.E.C.

A7.3

14

11

12

13

CLR4"

2'-0"

4A

(OPEN)

2'-0"2'-0"3'-0"1'-9"

2'-6" 3'-3" 3'-0"

2'-

0"

2'-

0"

LOCKINGPLAM UPPERCABS

GARAGE CANS, BY OWNER

7

A7.8

9

A7.8

1

A7.8

PAPER TOWEL& SOAP DISP.

PLAM CTOP, B.SPLASH& S.SPLASH

FRIDGEBY OWNER

3'-

0"

1'-6" 2'-6"

(open)PLAMBASE CABS

3'-

0"

6

A7.8

7

A7.8

PLAM CTOP& B.SPLASH& S.SPLASH

PAPER TOWEL& SOAP DISP.

FILLER

2'-9" 1'-3"

FILLER

3'-

0"

2'-

0"

2'-

0"

FILLER 2'-9" 1'-3" FILLER

15" DP.PLAM UPPERS

1

A7.8

24" DP.PLAM BASECABS

PLAM CTOP, B.SPLASH& S.SPLASH

7

A7.8

6

A7.8

WATERCOOLER

SOAP &PAPER TOWELDISP.

A7.3

10

A7.314

A7.3 16

15

11

12

13

TRIAGE(NEG

PRESSURE)1081

TOILET1035

SCALE1076

coat hook

7'-

8 1

/2"

7'-

9 1

/16

"7

'-8

1/2

"

1081

1035

12'-0"

7'-2" 4'-10"

8'-0" CLR

5A

5A

7A

5A

5A

5A 5A

7A

5A

WALL MOUNTEDEQUIP.BY OWNER

MODULARCASEWORKSYSTEMUPPER, BY OWNER

PAPERTOWEL &SOAP DISP.

MODULARCASEWORKSYSTEM CTOPW/ SINK &BASE CAB, BY OWNER

5'-0"

6"

RUB RAIL- COORDINATEHEIGHT W/ CHAIR BACK HEIGHT

2AD

D

2AD

D

GRABBARS

LINE OFCT WAINSCOT, SEE TYPICALWALL FINISHDETAIL 18/A7.1

TOILET PAPERDISP.

COAT HOOK



SOAP & PAPERTOWEL DISP.

GRABBAR

MIRROR


PIPE WRAP, TYP.

2'-8"3'-0"1"

PLAM CTOP& B.SPLASH

24" PLAM BASE CABS

SCALE,BY OWNER

FILLER

6

A7.8

3'-

0"

3'-0" 3'-0"

15" DP.PLAM UPPERCABS

PLAM CTOPW/ B.SPLASH

24" DP. PLAMBASECABS

7

A7.8

6

A7.8

1

A7.8


3'-

0"

2'-

0"

2'-

0"

FILLER

SOAP & PAPER TOWELDISP.

A7.3

22

21

20

23

EXAM1083 9'-6"

11

'-7

"

10

83

CLR

1'-6"

A7.3

17

18

19

C.H. WorkRoom1056 13'-8"

9'-

2"

10

56

5B

5B

7B

5B

COPIER, B.O.


PLAM CTOPW/ B.SPLASH

24" DP. PLAMBASECABS

FILLER3'-0"2'-6"2'-6"

2'-

0"

2'-

0"

3'-

0"

2'-6" 2'-6" 3'-0" FILLER

2

A7.8

6

A7.8

24" DEEP ADJ.

MEALAMINE

SHELVES ON

HEAVY DUTYBRACKETS &

STANDARDS

COATHOOK


MODULARCASEWORKSYSTEM,BY OWNER

2'-0" 1'-0"1 1/2"

2'-0"


MODULARCASEWORKSYSTEM,BY OWNER

2AD

D

2AD

D


RUB RAIL-COORDINATE HEIGHTW/ CHAIR BACK HEIGHT

6"

4'-6"

24" DEEP ADJ.

MEALAMINE

SHELVES ON

HEAVY DUTYBRACKETS &

STANDARDS

FILLER

3'-0" 1" 3'-0" 3'-0"

(open)

EYEWASH AT SINK, EXTRA DEEP SINK SINGLE POCKET

PLAM CABS W/LOCKS

1'-6 15/16"

7'-

0"

23

A7.81" 3'-0" 3'-0" 1'-3" FILLER

1

A7.8

3'-

0"

SOLID SURFACECTOP,B.SPLASH& S.SPLASH

24" DP.PLAM BASECABS W/ LOCKS

7

A7.8

6

A7.8


SV COVEBASE

5"

METAL TRIMTYPE C

METAL TRIMTYPE B

6 ROWS CT-5

24" X 36"MIRROR

PIPE WRAP, TYP.

PAINT

SV COVEBASE

METAL TRIMTYPE C

METAL TRIMTYPE B

6 ROWS CT-5

GRAB BARS

PAINT

5"

SOAP &PAPER TOWEL DISP.

TOILETPAPERDISP.

(fridge)

2'-

10

"

3'-

0"

1'-6" 2'-1"

3/4"

3'-0" 1 1/2"1'-6"

2'-

0"

2'-

2"

2'-

0"

2'-9" 2'-6" 3'-0" 1 1/2"

PLAM CTOPW/ WATERFALLEDGE, B.SPLASH& S.SPLASH

24" DP.PLAM BASE CABS/DRAWERS

6"4"


2

A7.8

9

A7.8

7

A7.8

60" MIN. CLR

5'-2" 2'-0" 2'-6" 2'-6"1 13/16"

PLAM TALLCABS W/ADJUST. SHELVING,LOCKING

2'-

6"

4'-

2"

24

A7.8

2 13/16"

1"

2'-6" 1'-3" 3'-0"

1" 60" MIN. CLR

5'-2"

3'-

0"

PLAM

CTOP &

B.SPLASH

24" DP. PLAM BASE

CABS

7

A7.8

6

A7.8

9

A7.8

PAPER TOWEL

& SOAP DISP.

A7.326

A7.3 28

29

30

27


1104

TOILET1103


1102

16'-0" 7'-8" 16'-0"

9'-

0"

2'-

4"

11

04

11

02

1103A1103B

CLR

4'-0"A7.3

34 CLR

4'-0"

7A

5A

7A

5A

5A

5A

7A

5A

A7.3 26

F.E.C.

1 9/16"

2'-6"2'-0"2'-6"

1 9/16"

PLAM TALLCABS W/ADJUST. SHELVING,LOCKING

4'-

2"

2'-

6"

24

A7.8




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W


1301056849



8/20/2020 3:30:29 PM

018131.00

JMD

RJL

07/06/2020


A7.3

Enlarged Plans& InteriorElevations-Clinical

1/4" = 1'-0"1

Enlarged Nurse Station1/4" = 1'-0"

2Enlarged Support Areas

1/4" = 1'-0"7

Med Room1/4" = 1'-0"

8Soiled East

1/4" = 1'-0"9

Nurse Sink

1/4" = 1'-0"4

Scale and Triage

1/4" = 1'-0"10

Triage

1/4" = 1'-0"11

Typ Toilet Elevation1/4" = 1'-0"

12Typ Toilet Elevation

1/4" = 1'-0"13

Typ Toilet Elevation1/4" = 1'-0"

14Typ Toilet Elevation

1/4" = 1'-0"15

Scale North1/4" = 1'-0"

16Scale East

1/4" = 1'-0"3

Typical Exam Room

1/4" = 1'-0"5

C.H. Work Room

1/4" = 1'-0"17

C.H. Work North1/4" = 1'-0"

18C.H. Work East

1/4" = 1'-0"19

C.H. Work South

1/4" = 1'-0"20

Typical Exam Room North1/4" = 1'-0"

21Typical Exam Room East

1/4" = 1'-0"22

Typical Exam Room South1/4" = 1'-0"

23Typical Exam Room West

1/4" = 1'-0"24

Clean East1/4" = 1'-0"

25Clean South

1/4" = 1'-0"26

Procedure Room1/4" = 1'-0"

27Proc. Tlt North

1/4" = 1'-0"29

Proc. Tlt South1/4" = 1'-0"

28Proc. Tlt East

1/4" = 1'-0"30

Proc. Tlt West

1/4" = 1'-0"31

Group Therapy1/4" = 1'-0"

32B.H. Hall West

1/4" = 1'-0"33

B.H. Hall East1/4" = 1'-0"

6Procedure Room

1/4" = 1'-0"34

Hall Storage


^aa O OMOMLMULOM

GENERAL ELEVATION NOTES:1. PROVIDE FINISHED FACE ON ALL EXPOSED SIDES OF CASEWORK.2. SEE SHEET A7.9 FOR TYPICAL MOUNTING HEIGHTS FOR FIXTURES & TYPICAL TOILET ROOM ACCESSORIES.3. PROVIDE IN-WALL BLOCKING FOR ALL WALL MOUNTED ITEMS.

ADD 2 2020/08/20

STANDARD WALLMOUNT SWIVEL MIRROR

STANDARD WALLMOUNT SWIVEL MIRROR

T ectonic Cop yright 2007

A7.1

4

3

OUTREACH(CHELSEY)

1019

INSURANCE(SHELLEY)

1018

SWITCHBOARD1017

CENTRALREGISTRATION

1013

WORK1012

RE-APPOINT/PAYMENT

1011

PRC(ASHLEY)

1014

PRC(MIKALA)

1015PATIENT

REG/CONSULT

1016


HALLWAY1005

HALLWAY1004A7.6

3

A7.64

A7.6 5

A7.6 8

A7.6 10

A7.6

2

7

9

A7.6 11

6

10

19

A

10

18

A1

01

8

10

19

10

17

10

16

10

15

10

14

10

14

A

10

15

A

1016A

11" 4'-0" 1'-0" 4'-0" 1'-0" 4'-0" 1'-4 1/2" 9'-6 3/4" 6 3/4" 4'-3 1/2"

18

17

1'-6" 4'-0"

CL

6'-0" 4'-0" 1'-4 1/2" 9'-6 3/4" 14'-11 5/16" 1'-1"

1020

9'-4" 10'-4"

CLR

3'-7" 2'-5" 2'-7"

CLR

5'-4 15/16" 2'-5" 2'-6"

9'-4" 10'-4" 12'-11 9/16"

7A

7A

5A

7A

5A

5A

7A

5C

7A

5C

7A

5C

5C

5C7D

5C

7A

7A

5A

7A

5A

5A

5A

5A

5A

90°

90°

5A

7A

7A

10

02

7A

5A

5A7A

7A

5A

5A

7F

5C

5F

4A

5F

5A5A7A

90°

90°

1011

6'-9 3

/16"

1200 2'-

2"

1'-

9"

5F

6A6.1

A7.712

7'-

4"

12

'-0

"9

'-6

3/4

"6

'-5

1/4

"1

2'-

0"

7'-

4"

7'-

0"

4'-

6"

2'-

5 5

/8"

2'-5 5/8"

4'-

11

7/1

6"

6'-11 11/16"

6'-11 5

/8"

6'-10"

9'-5"

5'-

8 1

3/1

6"

8'-7 1

/4"

5'-

1 1

5/1

6"

7'-4 3/8" 2'-11 5/8"

2'-

1"

7'-

2 1

/4"

2'-1"

135°

135°

9'-

6 1

/4"

7'-0"6'-1

1 5/8

"

135°135° 1'-10 1/2"

6'-9 1

/8"

11

39

135°

4 7

/8"

4 3

/8"

A7.6

6

8 5/8"

1'-0 11/16"

17

A7.7

A7.6

13

3'-

4 1

3/1

6"

3'-

4 1

/4"

5A

5A A7.6

12

A7.6

12Sim

5A

A7.6

14

6'-

2"

4'-10 5/8"

4A

A7.6

17

A7.6

13Sim

WCG

WC

G

WCG

WCGWCG

WCGWCG

WCG

WCGWCG WCG WCG WCG

A4.2

5

A4.2

5

WCG

A7.6

18

17

A7.7

Sim

15

'-4

3/4

"

10'-1 11/16" 11 11/16"

21

A7.6

F.E.C.

A7.6

22

WOODFAUX

COLUMNS W/LIGHT

INSET AREAW/BASKETWEAVE

VENEER

WOODBASE

TOBACCOBOWL, BY OWNER

GLASS SHELVES

WOODTRIM

2- TIER GYP. BD. SOFFIT W/ LIGHTCOVE & RECESSED COILING DOOR

OPEN OPENSOLID SURFACECTOP

CURVED SOLID SURFACECTOP W/WATERFALLFACE

CT-3 MOSAIC

WOOD BASE

15

A7.6

16

A7.6

3

A4.2WOODTRIM

1'-6"

BASKETWEAVEVENEER

SOLIDWOOD

17

A7.7

6"

17

A7.7

Sim4'-5 3/8" 4'-5 3/8"3'-0" 3'-0"6"

15

A7.6

16

A7.6

1'-6"1'-6"

TYP

.

3'-

8"

3'-

4"

1110A

WOOD FRAMED DECORATIVE RESIN PANEL (RP-1) WINDOWSW/ 1X4 WOOD CASING

TYP.

3'-8"

21

A7.1

Sim

1020 1024

5'-

4"

typ.

1'-

8"

typ.

3'-8" WOOD FRAMED DECORATIVE RESIN PANEL (RP-1) WINDOWSW/ 1X4 WOOD CASING

21

A7.1

15

A7.6

16

A7.6

3

A4.2

24" dp.PLAM DRAWERS

SOLIDSURFACECTOP, PROVIDE FIELDINSTALLED GROMMETSIN WORKSURFACE TOP

PLAM PANEL

1'-6"

FILLER

FILEFILE

FILLER

1'-6"

SOLID WOODTRIM

5'-9 15/16"5'-9 15/16" 6"

BASKETWEAVEVENEER

GLASS PANEL

10

A7.810

A7.8

15

A7.616

A7.6

BASKET WEAVEVENEER, WRAPS WALLON (4) SIDES

WOOD VENEERPANEL W/ SOLIDWOOD TRIM

WOOD VENEERPANEL W/ SOLID WOODTRIM

WOOD BASE

3/8" CLEARTEMPEREDGLASSPANEL

RECESSEDCOILING DOOR

3'-2" 1'-3 1/2"

20

A7.6

21

A7.6

BASKETWEAVEWOODVENEER

3'-

0"

2'-6" 1'-3" 2'-6"

SOLID SURFACECTOP, B.SPLASH& S.SPLASH

24" DP. PLAM CASEWORK

1X3 WOODPERIMETERTRIM

9

A7.8

file

6

A7.8

PLAMCTOP, B.SPLASH& S.SPLASH


15" DP. PLAM UPPERCABS

FILLER 2'-6" 1'-3" 2'-6" FILLER

3'-

0"

1'-

6"

2'-

6"


2

A7.8

6

A7.8

9

A7.8

6"

2'-

6"

1'-

0"

1'-6" 1'-6"

FILLER

24" dp.PLAM DRAWERS

SOLIDSURFACECTOP, PROVIDE FIELDINSTALLED GROMMETSIN WORKSURFACE TOP

PLAM PANEL

15

A7.6

16

A7.6

10

A7.8

1011

3'-

0"

1'-3" 3'-0" 1'-3"

BASKETWEAVEWOODVENEER

SOLID SURFACECTOP, B.SPLASH& S.SPLASH


1X3 WOODPERIMETERTRIM

9

A7.8

file

6

A7.8

file

SOLID SURFACECTOP

CURVED SOLID SURFACECTOP W/WATERFALLFACE

CT-3 MOSAIC

WOOD BASE

RECESSEDCOILING

DOOR IN GYP. BD.SOFFIT

1011

15

A7.6

16

A7.6

WOODCOLUMN WRAP,SEE PLAN DETAIL

WOODCOLUMN WRAP,SEE PLAN DETAIL

WOOD CORNERGUARD, SEE DETAIL

WOOD CORNERGUARD,

SEE DETAIL

4'-0" 4'-4 3/8"

1'-8"

3/8" FIBERGLASS

BULLET RESISTANT PANEL

5/8" TILE

BACKER BOARD

CT-3 MOSAIC OVER

THIN MORTAR BED

1/4" SOLID SURFACE

PANEL OVER 3/4" PLYWOOD

SUBSTRATE

3/4" SOLID SURFACE


SUBSTRATE

2'-0"

PLAM OVER 3/4" PLYWOOD

PANEL

(PROVIDE REMOVEABLE BACK

PANEL

SECTION FOR ELEC. ACCESS)

RESILIENT

BASE

CTOP

SUPPORT

BRACKETS

AS REQ'D

SOLID SURFACE

CTOP W/

EASED EDGES

& FIELD INSTALLED GROMMETS

VARIES-SEE PLAN

1'-

7 1

/4"

1X WOOD BASE

W/ EASED EDGE, TYP.

2X4 FR WOOD

STUDS @ 16" O.C.

2X FR WOOD

FRAMING

1 1

/2"

1/2" SOLID SURFACE


SUBSTRATE

2'-

6"

STRAIGHT

CTOP (WHERE OCCURS, SEE

ELEV & PLAN)

(3/4" SOLID SURFACE

MATERIAL OVER SUBSTRATE)

3"

VARIES

5 1

/2"

3'-

0"

3'-

6"

2'-1 5/8"

2'-0" 1'-0"

6"

2'-

6 1

/16

"

3'-

0 1

/16

"

3"

3/8" FIBERGLASS

BULLET RESISTANT PANEL

5/8" TILE

BACKER BOARD

CT-3 MOSAIC OVER

THIN MORTAR BED

3/4" SOLID SURFACE


SUBSTRATE

PLAM OVER 3/4" PLYWOOD

PANEL

(PROVIDE REMOVEABLE BACK

PANEL

SECTION FOR ELEC. ACCESS)

RESILIENT

BASE

SOLID SURFACE

CTOP W/

EASED EDGES

& FIELD INSTALLED GROMMETS

1X WOOD BASE

W/ EASED EDGE, TYP.

2X4 FR WOOD

STUDS @ 16" O.C.

1/2" SOLID SURFACE


SUBSTRATE

PLAM CAB BEYOND

1/4" SOLID SURFACE


SUBSTRATE

4 7/8"

2'-1 5/8"

1'-

0"

1'-0"

2-1/2" METALSTUD FRAMING

STRUCTURALCOLUMN

3/4" WOOD VENEERPLYWOOD

WALL- SEE PLAN FOR TYPE


5/8" GYP. BD. (OFFICE SIDE)

3/4" WOODVENEER PLYWOOD

3/4" WOODVENEER PLYWOOD

STRUCTURALCOLUMN

2-1/2"METAL STUDFRAMING

RECESSEDROLLING DOORFRAME - VERIFY INSTALLATIONREQUIREMENTS W/MANUFACTURER'S INSTRUCTIONS


1'-

3"

1'-5 1/4"

1'-5 1/4"

7 1/4"

1'-

3"

3/4"WOODVENEERPLYWOOD

RECESSEDROLLING DOORFRAME- VERIFYINSTALLATIONREQUIREMENTSW/ MANUFACTURER'SINSTRUCTIONS

WALL, SEE PLAN FOR TYPE

2-1/2"METAL STUD FRAMING



1'-

4"

3 3/4"

1'-2"

3/4"WOODVENEERPLYWOOD

WALL- SEE PLANFOR TYPE


2 1/2"

2 1

/2"

1X SOLID WOODTRIM, MITEREDCORNER W/EASED EDGES @OUTSIDE CORNEROF WALL

VERIFY WALLANGLE

NOTE: LOCATIONS NOTED ON FLOOR PLAN W/ " " SYMBOL & "WCG" NOTATION

1'-

3"

WALL- SEEPLAN FOR TYPE

WALL- SEEPLAN FOR TYPE


5/8" GYP. BD.(OFFICE SIDE)

5/8" GYP. BD.(OFFICE SIDE)

STRUCTURALCOLUMN

3/4" WOODVENEERPLYWOOD

1'-

10

1/2

"2

'-6

"3

'-7

1/2

"

DESK TRANSACTION TOP,SEE DESK DETAILS

DESK CTOP,SEE DESK DETAILS

1x SOLID WOOD


1x SOLIDWOOD

2X WOODSTUD FRAMING

2X WOODSTUD FRAMING

GYP. BD.SOFFIT

3/8" TEMPEREDCLEAR GLASS

RECESSED METALGLASS CHANNEL

RECESSED METALGLASS CHANNEL

1X SOLID WOODBASE


6"

6"

DESK TRANSACTION TOP,SEE DESK DETAILS

DESK CTOP,SEE DESK DETAILS

2'-

6 3

/4"

3'-

6 3

/4"

1'-

10

1/2

"

1x1 SOLID WOOD


1x1 SOLIDWOOD

2X WOODSTUD FRAMING

2X WOODSTUD FRAMING

GYP. BD.SOFFIT

1X SOLID WOODBASE


3/4"PLYWOOD W/BASKETWEAVEVENEER

2'-

6"

25" DP. PLAM CTOPON SUPPORTBRACKETS ASREQ'D. PROVIDEUP TO 4 FIELD INSTALLEDGROMMETS

8

A7.8




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W


1301056849



8/20/2020 3:30:31 PM

018131.00

JMD

RJL

07/06/2020


A7.6

Enlarged Plans& InteriorElevations-Registration

1/4" = 1'-0"1

Reception

1/4" = 1'-0"4

Registration Hall- West

1/4" = 1'-0"2

North Hallway-North1/4" = 1'-0"

3South Hallway-South

1/4" = 1'-0"5

Registration East

1/4" = 1'-0"6

Registration-North (South Mirr.)1/4" = 1'-0"

7Registration-West

1/4" = 1'-0"8

Work East1/4" = 1'-0"

9Reappoint-West

1/4" = 1'-0"10

Reappoint-East1/4" = 1'-0"

11Reappointment


^aa O OMOMLMULOM

1 1/2" = 1'-0"15

Desk Section 11 1/2" = 1'-0"

16Desk Section 2

GENERAL ELEVATION NOTES:1. PROVIDE FINISHED FACE ON ALL EXPOSED SIDES OF CASEWORK.2. SEE SHEET A7.9 FOR TYPICAL MOUNTING HEIGHTS FOR FIXTURES & TYPICAL TOILET ROOM ACCESSORIES.3. PROVIDE IN-WALL BLOCKING FOR ALL WALL MOUNTED ITEMS.

1 1/2" = 1'-0"12

Wood Column Wrap Detail1 1/2" = 1'-0"

13Column Wrap Detail @ Desk

1 1/2" = 1'-0"14

Faux Column Detail @ Desk

1 1/2" = 1'-0"17

Faux Column Detail 21" = 1'-0"

19Wood corner guard detail

1 1/2" = 1'-0"18

Wood Column Wrap Detail 21" = 1'-0"

20Section Thru Privacy Divider

1" = 1'-0"21

Section Thru Privacy Divider 2

1/4" = 1'-0"22

Switchboard

2AD

D

08-20-20 EDI-Dolejs, Inc. # 19-002

Bay Mills Health Center ADDENDUM TWO- 1

MECHANICAL/ELECTRICAL ADDENDUM TWO

DIVISION 23 – HEATING, VENTILATION, AND AIR CONDITIONING

CHANGES TO THE PROJECT MANUAL: Section 23 09 93 – SEQUENCE OF OPERATIONS FOR HVAC CONTROLS

1. Add the following:

3.19 DENTAL HOOD

A. The system consists of a hood with integral blower motor controls.

B. The transfer/make-up air duct shall include a motorized damper in the duct. The damper shall open when the hood is ON and closed when the hood is OFF.

1. The BAS shall provide an output open the motorized damper when the hood blower is ON.

2. The BAS shall monitor hood status. 3. Points list.

Item Monitor Control Function Type Indication

1 X Hood blower Status DI ON/OFF

2 X Hood Transfer Duct Damper DO OPEN/CLOSED

CHANGES TO THE MECHANICAL DRAWINGS: Drawing M4.2 – FIRST FLOOR PLAN NORTH – HVAC: (Reissued)

1. Add existing relocated Lab Hood. 2. Relocate 28/16 & 18/14 Transfer ducts. 3. 14/12 Transfer ducts have been added between Hallway 1034C and Hallway 1140, and

between Hallway 1141 and Hall 1006. Drawing M6.1 – MECHANICAL SCHEDULES: (Reissued)

1. Air Handling Unit schedule has been revised. 2. VAV / Reheat Coil Terminal Unit Schedule has been revised.

BIDDER QUESTIONS:

1. Question: Spencer Dohms – IMMEL Construction: What pressure classification does the ductwork downstream of the VAV’s need to be built to? 2” W.G.?

Answer: Ductwork downstream of the VAV shall be low pressure classification and positive 2” inch wg. Refer to specification 23 31 13, 3.9, Duct Schedule.

DIVISION 26, 27, 28 – ELECTRICAL CHANGES TO THE PROJECT MANUAL: Section 26 7111 – DIGITAL ADDRESSABLE FIRE ALARM SYSTEM

08-20-20 EDI-Dolejs, Inc. # 19-002


1. Delete 2.1.B in its entirety.

2. Revise 2.5.C.3 to read as follows: “Duct Housing Enclosure: NEMA 250, Type 1;

NRTL listed for use with supplied detector for smoke detection in HVAC system

ducts.”

Section 28 1500 – ACCESS CONTROL HARDWARE DEVICES

1. Revise 1.2.A.4 to read as follows: “System shall be Lenel On-Guard Enterprise Series.” 2. Delete 1.2.B in its entirety.

Section 28 2313 – VIDEO SURVEILLANCE CONTROL AND MANAGEMENT SYSTEMS

1. Delete 1.1.B.1 in its entirety. 2. Delete 1.1.B.2 in its entirety. 3. Delete 1.3. in its entirety. 4. Revise 2.1.B.2.f to read as follows: “Operating System: Windows 10 Professional, A 64-

bit operating system.” 5. Revise 2.2.C.7 to read as follows: “Operating System: Windows 10 Professional, A 64-bit

operating system.” 6. Add 2.2.C.8 as follows: “Provide one(1) Video Management System station. Coordinate

location of computer with Owner prior to installation.” 7. Revise 2.4.D to read as follows “The NVMS basis of design is the Avigilon Control Center

(ACC) version 7. The design and performance requirements for the NVMS software are as follows:”

8. Revise 2.4.D.2.a to read as follows: ACC 7 “Enterprise” Edition Supporting:

CHANGES TO THE ELECTRICAL DRAWINGS: Drawing E0.1 – TITLE SHEET - ELECTRICAL: (Reissued)

1. Add nurse call symbols to Symbol Legend. Drawing E2.1 – FLOOR PLAN – SOUTH - LIGHTING: (Reissued)

2. Revise plan note #2. 3. Revise plan note #3. 4. Revise plan note #5.

Drawing E2.2 – FLOOR PLAN – NORTH - LIGHTING: (Reissued)

1. Revise plan note #2. 2. Revise plan note #3. 3. Revise plan note #5.

Drawing E4.1 – FLOOR PLAN – SOUTH – SYSTEMS: (Reissued)

1. Add Nurse call system locations. Drawing E4.2 – FLOOR PLAN – NORTH – SYSTEMS: (Reissued)

1. Add Nurse call system locations.

Drawing E6.3 – SCHEDULES – ELECTRICAL

1. Refer to panel H1 – Revise circuit breaker for AHU1-RF from 20/3 to 25/3.

08-20-20 EDI-Dolejs, Inc. # 19-002


Drawing E7.3 – DETAILS - ELECTRICAL: (Reissued)

1. Delete detail 4/E7.3 in its entirety. 2. Delete detail 5/E7.3 in its entirety. 3. Delete detail 8/E7.3 in its entirety. 4. Add detail 12/E7.3 – “Communications Riser Diagram”.

BIDDER QUESTIONS:

1. Question: Ryan Sharp – Wolverine Power: This is from the spec:

i. Noise Emission: Comply with applicable state and local government requirements with 60dB at 50 feet for maximum noise level, due to sound emitted by generator set including engine, engine exhaust, engine cooling-air intake and discharge, and other components of installation.

ii. This will have all of the generator manufacturers quoting to get a custom enclosure priced which will add a large cost to the project for the owners – on average all of the manufacturers L2 enclosures will be in the 68.4 dBA @ 50 Ft.

iii. Will the manufacturer L2 dBA average listed be acceptable or will we need to quote a custom enclosure for the system?

Answer: The specification requires Level 3 enclosure due to the proximity and sensitivity of the neighbors nearby. Please provide as specified.

2. Question: Spencer Dohms – Immel Construction: Heat trace is indicated on the underground storm, is this required?

Answer: Per the Contract Documents, Yes. APPROVED MANUFACTURER SUBSTITUTIONS: Naming below does not guarantee approval, substitutions must meet requirements of the specifications and plans. Section: Item: Manufacturer:__________________ 26 0924 Local Low Voltage Lighting Control Hubbell Control Solutions 26 0926 Relay Based Lighting Controls Hubbell Control Solutions 26 3213 Engine Generators Generac Industrial 26 3602 Transfer Switchgear Generac Industrial 26 5100 LED Interior Lighting A- Columbia AE - Columbia B - Columbia BE - Columbia C4 - Columbia C4E - Columbia C8 - Columbia C8E - Columbia D1 – Prescolite D1E - Prescolite E1 – Dual-lite E2 - Dual-lite G – Columbia

08-20-20 EDI-Dolejs, Inc. # 19-002


H – Columbia HE - Columbia J2 – Litecontrol J4 – Litecontrol J4E – Litecontrol J4F – Litecontrol J15F - Litecontrol K - Columbia KE – Columbia L4 – Insight L5 – Insight L12 – Insight L24 – Insight M5 – Litecontrol N7 - Litecontrol RE – Newstar W2 – Litecontrol W4 – Litecontrol W6 – Litecontrol W11 – Litecontrol 26 5619 LED Exterior Lighting AA – Beacon BB - Beacon CC – Newstar DD - Hubbell EE - Hubbell

FF – Hubbell GG - Insight

HH – Insight JJ – Forum JJE – Forum LL - Insight 26 7111 Digital Addressable Fire Alarm System Notifier 28 1500 Access Control Honeywell, Vicon 28 2313 Video Surveillance EqacqVision, Digital Watchdog, Vicon END OF MECHANICAL/ELECTRICAL ADDENDUM TWO

19-002 / Bay Mills Health Center 28 70 00 - 1 DOOR ENTRY COMMUNICATION SYSTEM

SECTION 28 70 00 - DOOR ENTRY COMMUNICATION SYSTEM

PART 1 - GENERAL


A. Integrated door entry security and communication system.

1.2 REFERENCES

A. ISO 9001:2000 – Quality Management Systems – Requirements. B. TIA/EIA 568 – Commercial Building Telecommunications Cabling Standard.

1.3 SYSTEM DESCRIPTION

A. Components:

1. Door stations. Model AX-DVF with surface back box Model SBX-AXDVF. 2. Master Stations: Connect a maximum of seven 16-call add-on selectors Model AX-8MV. 3. Central Exchange Units (CEU): Connect a maximum of 3 add-on exchange units Model AX-

248C. 4. Power supply. Model PS-2420UL 5. Other External Connections:

a. Access control system. b. Video output.

B. Calling Master Station from Door Station and Communicating:

1. Priority Levels for Calls from Door Stations:

a. Normal. b. Priority.

2. Press door station CALL button. 3. Calling tone rings on master station (for normal call, intermittent tremolo sound; for priority call,

rapid intermittent tremolo sound) and selector button LED for individual door station flashes (double-flash for priority call). If door station has camera, video from door station shall be displayed on master station monitor. Call tone continues to ring until answered or is timed out (based on setting). You can stop calling tone by pressing OFF button.

4. If you press individual door station selector button, LED stops flashing and stays lit and you can talk hands-free to that station. If only TALK button is pressed to answer call, hands-free communication initiates with door station at highest priority call. Talk LED lights when you talk and goes off as you listen to caller.

5. Press OFF button again to end communication. Call also ends automatically when set talk limit is reached.

6. If you hold down TALK button for a minimum of 1 second, communication switches to press-to-talk mode. Hold down TALK button to talk and release to listen to caller. You cannot switch back from press-to-talk communication to hands-free communication.


7. If other master station presses selector button of in-use door station or in-use master station, busy signal is heard at master station.

8. Microphone is muted while you hold down privacy button on master station while in communication.

9. You can connect footswitch and use it the same manner as TALK button. 10. Master station can display calls up to 8 stations at the same time. If there are more than 8

incoming calls, they will be displayed in order of priority and time of call. 11. You can adjust calling tone, transmit volume, and receive volume with volume controls at bottom

of master station. 12. You can use a headset (not included in system) instead of built-in master station’s speaker and

microphone.

D. Calling Master Station from Another Master Station and Communicating:

1. Press individual selector button of master station. 2. Pre-tone sounds both master stations and starts hands-free communication. Talk LED lights

when you talk and goes off as you listen to caller. 3. Press OFF button to end communication. You can end call from either master station. Call also

ends automatically when set communication end time is reached. 4. If called master station has privacy mode set (privacy settings button is lit), communication is only

1-way, from calling master station to called master station, and nothing can be heard from called master side. Press TALK button on called master station for a minimum of 1 second. Press-to-talk communication starts. Hold down TALK button to talk and release to listen to caller.

5. You cannot call master station while it is communicating. You will hear a busy signal.

E. Privacy (PRIV) Function:

1. To make master into privacy mode (prevent monitoring from other stations), press privacy button (LED lights up).

2. To cancel privacy mode, press privacy button again (LED goes out). 3. Privacy setting cannot be changed while in communication.

F. CO Line Call from Door Station and Communication:

1. If CALL button is pressed at door station while CO Transfer feature is set (with CO Transfer button lit), call tone rings on master station (for normal call, intermittent tremolo sound; for priority call, rapid intermittent tremolo sound) and selector button LED for individual door station flashes (double-flash for priority call). At same time, telephone call is placed to programmed CO line number.

2. You can communicate with door station from telephone. 3. You can end communication at telephone. Communication also ends automatically when set talk

time limit is reached. About 10 seconds before end of call, you will hear alarm sound on telephone.

4. Maximum duration for CO line call is 300 seconds, even if call timer is set to “Infinite”. 5. Using this function requires Viking Electronics, Inc. “K-1900-5 Hot-Line Pulse Dialer”. 6. If there are multiple calls, call from door station with highest call priority is transferred. 7. Answering at any master station during CO transfer feature will stop CO transfer. 8. There are no functions, such as for door release and dial-in, from telephone.

G. All Call (Normal Master Station Paging):

1. When you press ALL CALL button on master station, all individual master station selector button LEDs flash slowly. You can clear undesired master station from All Call by pressing individual master station selector button with flashing LED, which will turn off LED. Pressing that button again makes that master station part of All Call again and makes LED flash.


2. If you press TALK button, send LED lights up and all individual master station selector buttons stop flashing and stay lit. Pre-tone sounds on target master stations and they can be talked to. At this time, you cannot hear audio from other master stations.

3. Press OFF button to end. You can end call for individual master station by pressing its OFF button.

4. All Call announcements do not go to master stations that are in use. 5. During All Call, if you press individual master station selector button on calling master station or

press individual master station selector button or TALK button on 1 of the other master stations, communications switch to hands-free between master stations.

6. There is no function for hands-free reply from called master station during All Call mode. 7. If you press down ALL CALL button but do not start talking within 30 seconds, system goes back

to standby mode. You can also return to standby by pressing OFF button.

H. All Call (Priority Master Station Paging):

1. When you press ALL CALL button on master station, all individual master station selector button LEDs flash slowly.

2. If you press ALL CALL button again, flash rate increases. You can clear undesired master station from All Call by pressing individual master station selector button with flashing LED, which will turn off LED. Pressing that button again makes that master station part of All Call again and makes LED flash.

3. If you press TALK button, TALK LED lights up and all individual master station selector buttons stop flashing and stay lit. Pre-tone sounds on all master stations and all can be called. At this time, you cannot hear audio from other master stations.

4. Press OFF button to end. You can end call for individual master station by pressing its OFF button.

5. Communication of master station being used is cancelled and All Call takes priority. Before communication of master station being used is cancelled, you hear cancel warning sound.

6. During All Call, if you press an individual master station selector button on calling master station or press individual master station selector button or TALK button on one of the other master stations, communications switch to hands-free between those two master stations.

7. There is no function for talk back from master station receiving an All Call announcement. 8. If you press down ALL CALL button but do not start talking within 30 seconds, system goes back

to standby mode. You can also return to standby by pressing OFF button.

I. Monitor:

1. If you press individual door station selector button, you can hear audio and if that door station has a camera, you can see image.

2. Press OFF button to end. Call also ends automatically when set communication end time is reached.

3. While door station is communicating with or monitored by a master station, you cannot monitor that door station from another master station.

4. If you press TALK button while monitoring, hands-free communication mode starts with that door station.

J. Scan Monitor:

1. When scan monitor button is pressed, door stations that have been enabled for “Scan Monitor” in programming can be monitored sequentially for a specified time interval (configured in programming).

2. Monitoring always initiates from target door station with lowest number. 3. If you press scan monitor button while individually monitoring target door station, monitoring starts

with the next door station in line. 4. If you press scan monitor button while monitoring non-target door station, monitoring starts with

the first door station enabled for scan monitoring. 5. Press OFF button to end.


6. Communication/video channel 2 is always used for scan monitoring. During scan monitoring, video signal is always outputted from video output port 2 (V2). Scan monitoring is not possible when communication/video channel 2 is being used, even if busy LED is not illuminated.

7. Only one master station at a time can perform scan monitoring. 8. If you press TALK button during scan monitoring, hands-free communication mode starts with

that door station. 9. If you press individual door station selector button or scan monitor button during scan monitoring,

monitoring switches to monitoring individual door station. 10. If master station receives call from door station during scan monitoring, scan monitor function

ends automatically and shall be restarted manually. 11. Scan monitoring continues without limit until it is cancelled, but master station LCD monitor goes

out after 10 minutes. Outside video output continues even with LCD off. If you press scan monitor button with LCD off, LCD lights up again.

12. If you press TALK button during scan monitoring, communication mode starts with door station being monitored.

K. Activating Door Release:

1. Press door release button during communication or monitoring with door station. 2. Door release function will be activated, releasing door lock. 3. You cannot operate door from outside telephone. 4. LED stays lit while door release function is activated. 5. Door release contacts can be set to Normally Open or Normally Closed via program

configuration.

L. Priority:

1. Calls have priority based on the time the call was initiated. (Earlier call has priority over later call).

2. Communication Priority, from Highest to Lowest:

a. Door station, telephone line communication. b. Priority All Call. c. Door station to master station communication. d. Master station to master station communication. e. Normal All Call. f. Monitor. g. Scan monitor.

1.4 SUBMITTALS

A. Comply with Section 01330 (01 33 00) – Submittal Procedures. B. Product Data: Submit manufacturer’s product data, including installation instructions. C. Shop Drawings: Submit the following:

1. Wiring Diagrams: Indicate wiring for each item of equipment and interconnections between items of equipment.

2. Include manufacturer’s names, model numbers, ratings, power requirements, equipment layout, device arrangement, complete wiring point-to-point diagrams, and conduit layouts.

D. Installation and Operation Manuals:

1. Submit manufacturer’s installation and operation manual, including operation instructions and component wiring diagrams.


2. Provide detailed information required for Owner to properly operate equipment.

E. Warranty: Submit manufacturer’s standard warranty.


A. Manufacturer’s Qualifications: ISO 9001:2000 certified company.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Delivery: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.

B. Storage: Store materials in clean, dry area indoors in accordance with manufacturer’s instructions. C. Handling: Protect materials during handling and installation to prevent damage.

1.7 WARRANTY

A. Warranty Period: Two years from date of Substantial Completion. PART 2 - PRODUCTS

2.1 MANUFACTURER

A. Aiphone Corporation, 1700 130th Avenue NE, Bellevue, Washington 98005. Toll Free (800) 692-0200. Phone (425) 455-0510. Fax (425) 455-0071. Website www.aiphone.com. E-mail [email protected].

2.2 DOOR ENTRY SECURITY AND COMMUNICATION SYSTEM

A. Integrated Security and Communication System: Aiphone “AX Series”.

1. Power Source:

a. 24 V DC, 2 A. b. Two PS-2420UL (110 V AC) per video system. One PS-2420UL (110 V AC) per audio

system.

2. Door Station Calling:

a. Tremolo call tone programmable from 10 to 600 seconds or infinite. b. LCD monitor remains on for duration of call-in and communication up to a maximum of 10

minutes.

3. Master Station Calling: Select station to call, pre-tone sounds, then speak hands-free or push-to-talk.

http://www.aiphone.com/

mailto:[email protected]


4. Communication:

a. Auto: VOX. b. Manual: Press-to-talk, release-to-listen.

5. Camera: CCD 250,000 pixels. 6. Video Monitor:

a. 3.5-inch direct view TFT color LCD. b. Scanning Lines: 525.

7. Door Release: N/O or N/C, programmable per station. 8. Door Release Contact: 24 V AC/DC, 0.5 A. 9. Wiring: CAT-5e UTP-4 homerun from each station to CEU. 10. Distance:

a. Door Station to CEU: 980 feet maximum. b. Master Station to CEU: 980 feet maximum.

11. CO Line Transfer Adaptor: Viking Electronics, Inc. “K-1900-5 Hot-Line Pulse Dialer”.

B. Central Exchange Unit:

1. Expanded Central Exchange Unit: Model AX-248C.

a. Connect: Maximum of 8 master stations and 24 door stations. b. Current Consumption:

1) Video: 1100 mA maximum. 2) Audio: 1250 mA maximum.

c. Video Output:

1) NTSC standard 1 Vpp (0.7 to 1.4 Vpp). 2) Two BNC.

d. Video Output Trigger:

1) Open collector output. 2) 24 V DC, 30 mA. 3) Two RJ-45.

e. Master and door stations homerun to CEU for connection and programming. f. RJ-45 Input Jacks: Station connection, add-on CEU connection, and CO line output. g. Quick Release: Dry contact terminals for door release functions and power supply

connection. h. RS-232 Connection:

1) Input: Programming. 2) Output: Event logging and CCTV/access control interface.

i. Composite video output (BNC). j. Selective door release programmable to N/O or N/C. k. CCTV and access integration. l. Programmable by PC. m. Rack mountable (2U).


n. Operating Temperature: 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C). o. Power switch. p. Power/Communications Error Display LED:

1) Off: Power off. 2) Lit: Power on. 3) Flashing: Error in device or wiring.

q. Ports:

1) Door station ports. 2) Master station ports. 3) Add-on exchange unit ports. 4) CO line port. 5) Setting/log port. 6) Video output ports. 7) Video output trigger ports. 8) Door release relay ports. 9) Power supply ports.

C. Master Stations:

1. Master Stations: [Audio/Color Video Model AX-8MV] [and] [Audio Model AX-8M].

a. CAT-6 homerun wired to CEU. b. Buttons:

1) 8 individual door station selector buttons with LED. 2) 8 individual master station selector buttons with LED. 3) Door release button with LED. 4) Scan monitor button with LED. 5) CO line transfer button with LED. 6) Privacy button with LED. 7) Oversized TALK button with LED to activate VOX or PTT style communication. 8) ALL CALL button. 9) OFF button.

c. Occupied LED. d. Speaker. e. Microphone. f. Volume Controls:

1) Receive Switch: Low, medium, high. 2) Transmit Switch: Low, medium, high. 3) Call tone.

g. LCD brightness control. h. Jacks:

1) Headset receiver. 2) Headset microphone.

i. Headset Volume Controls:

1) Receiver. 2) Microphone.


j. Directory Cards and Covers:

1) Master station. 2) Door station.

k. Reset switch. l. RJ-45 jack for connection to CEU. m. Connector for add-on selector on master station. n. Door call-in indicator. o. Hands-free or push-to-talk communication. p. All Call to master stations. q. Scan monitoring. r. Selective door release. s. Privacy and mute functions. t. Wall or desk mount. Metal bracket included for wall mounting. u. Multi-Pin Connector:

1) Video output from master station. 2) External signaling of call tones (through IER-2 or activation of TAR-3). 3) Footswitch activation for TALK function.

v. Operating Temperature: 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C). w. Monitor: 3.5-inch color LCD, master station Model AX-8MV. x. Outside Video Output: NTSC standard 1 Vpp (0.7 to 1.4 Vpp), master station Model AX-

8MV.

D. Door Stations:

1. Fixed Color Video Door Station: Model AX-DVF.

a. Faceplate: Stainless steel. b. Surface mount with use of SBX-AXDVF stainless steel back box. c. Call Button: Metal. d. Camera. e. Camera Protection: Clear Lexan lens cover. f. RJ-45 jack. g. Speaker. h. Microphone. i. Directory card. j. White Illumination LEDs: Automatically turn on in low-light conditions. k. CAT-5e homerun wired to CEU. l. Operating Temperature: 14 degrees F to 140 degrees F (minus 10 degrees C to 60

degrees C). m. Vandal resistant.

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine areas to receive integrated security and communication system. B. Notify Architect of conditions that would adversely affect installation or subsequent use. C. Do not begin installation until unacceptable conditions are corrected.


3.2 INSTALLATION

A. Install integrated security and communication system in accordance with manufacturer’s instructions at locations indicated on the Drawings.

B. Mount equipment plumb, level, square, and secure. C. CAT-6 Cables:

1. Run cables from and homerun to one central location where CEU will be installed. 2. Maximum Cable Runs: Keep each cable run to a maximum of 980 feet from communication

device to CEU. 3. Maintain twists of cable pairs to point of termination or no more than 0.5-inch untwisted. 4. Do not remove more than 1 inch of jacket when terminating cables. 5. Cable Bends:

a. Make gradual bends of cable, where necessary. b. Do not make bends of cable sharper than 1-inch radius. c. Do not allow cable to be sharply bent or kinked at any time.

6. Cable Ties: Dress cables neatly with cable ties using low to moderate pressure. 7. Cross-connect cables, where necessary, using CAT-5e rated punch blocks and components. 8. Do not splice or bridge cables. 9. Cable Pulling:

a. Pull cable with low to moderate force. b. Do not use oil or other lubricants not specifically designed for cable pulling.

10. Keep cables as far away from potential sources of EMI as possible. 11. Do not tie cables to electrical conduits or lay cables on electrical fixtures. 12. Cable Supports:

a. Install proper cable supports a maximum of 5 feet apart. b. Do not support cables by ceiling tiles.

13. Label Cable Termination Points: Use unique number for each cable segment. 14. Testing Cables: Test installed cable segments with cable tester. 15. Jacks: Install jacks to prevent dust and other contaminants from settling on contacts. 16. Cable Slack:

a. Leave extra slack on cables, neatly coiled-up in ceiling or nearest concealed place. b. Leave a minimum of 1 foot of cable slack at door station side and a minimum of 10 feet of

cable slack at CEU side.

17. Do not install cables taught. 18. Grommets: Protect cables with grommets where passing through metal studs or other items that

could damage cables. 19. Do not mix TIA/EIA 568A and 568B wiring on same installation. Use TIA/EIA 568B wiring

throughout installation. 20. Staples:

a. Do not use staples that crimp cables tightly. b. Do not use T-18 and T-25 cable staples.

21. Use firestop cables that penetrate firewalls. 22. Use plenum-rated cables where mandated.


3.3 ADJUSTING

A. Adjust integrated security and communication system for proper operation in accordance with manufacturer’s instructions.

3.4 DEMONSTRATION AND TRAINING

A. Demonstration:

1. Demonstrate that integrated security and communication system functions properly. 2. Perform demonstration at final system inspection by qualified representative of manufacturer.

B. Instruction and Training:

1. Provide instruction and training of Owner’s personnel as required for operation of integrated security and communication system.

2. Provide hands-on demonstration of operation of system components and complete system, including user-level program changes and functions.

3. Provide instruction and training by qualified representative of manufacturer.

3.5 PROTECTION

A. Protect installed integrated security and communication system from damage during construction.

END OF SECTION

TS

PLAN NOTES

GENERAL NOTES

OFFICE

1122

OFFICE

1123

OFFICE

1124

OFFICE

1125


1102

BILLING OFFICE(ASHLEY)

1177

ADMIN OFFICE(DAN)

1176

ADMIN OFFICE(TARA)

1175

OFFICE

1126

PRC (ASHLEY)

1014

CONTACTS

1152

TOILET

1137

SPECIMEN TOILET

1131B

SPECIMEN TOILET

1131A

LAB OFFICE

1135

LAB

1134

WORKROOM

1151

OPTICAL EXAM

1155

OPTICAL EXAM

1154

VISITATION

1162

REFERENCE

1161

TOILET

1145

H.I.M

1160

MEETING

1143

MECH ROOM

1221

HIM OFFICE(ANDREW)

1178

LOCKERS

1222

PAN

1205

PATIENT REG/CONSULT

1016

PRC (MIKALA)

1015

DENTAL CONSULT

1201

DENTALRECORDS

1203

TOILET

1220

LAB OFFICE

1210A

LAB

1210

TOILET

1209

STERILIZATION

1208

TOILET

1103


1104

CONSULT

1101

OFFICE

1116

PLAY THERAPY

1114

GROUP THERAPY

1113

OFFICE

1115OFFICE

1112

WAITING

1130DRAW

1133

STAFF WORK

1132

MEN'S TOILET

1010

B.H. HALLWAY

1117B.H. HALLWAY

1110

PROCEDUREHALLWAY

1105

OPTICALHALLWAY

1150

OPTICAL SALES

1153

HALLWAY

1142

HALLWAY

1140 DENTAL HALLWAY

1207

PAN OPERATOR

1202A

DENTAL HALLWAY

1219

STORAGE

1114A

JAN.

1107

BILLING HALLWAY

1170

ADMIN OFFICE(ABBY)

1172

MEETING

1144

ADMIN OFFICE(YVONNE)

1173

ADMIN OFFICE(AUDREY)

1174 DENTAL EXAM

1215

DENTAL HALLWAY

1202

DENTAL EXAM

1211

DENTAL EXAM

1212

DENTAL EXAM

1213

DENTAL EXAM

1214

DENTAL EXAM

1216

HALLWAY

1005

DENTALRECEPTION

1204

DENTAL WAIT

1200


1106

PROCEDUREHALWAY

1100

IT

1136

PROVIDEROFFICE

1094D

OFFICE

1118

OFFICE

1119

OFFICE

1120

OFFICE

1121

CD-125

CD-125

8/8

VAV 2-17

VAV 2-18 12/10

CD-200

CG-130

CG-375

VAV 2-19

VAV 2-20

8/10

CD-100

CD-170

CD-130

12/10

CD-200VAV 2-21

CD-95

CD-75

VAV 2-22

12/10

CD-200

VAV 2-23VAV 2-24

CD-150 CD-150

8/10 8/10

12/10

VAV 2-26CD-160 CD-16010/10

10/10

VAV 2-25

10/10

CD-75

CD2-75

VAV 2-27

LSD-250 48" x (3) 3/4" SLOTS

LSD-250 48" x (3) 3/4" SLOTS

VAV 2-28

VAV 2-29

VAV 2-30

VAV 2-31

CD-100CG-100

8/8

8/8

CG-980

CG-975

LSD-11048" x (2) 3/4" SLOTS

(2) LSD-150 48" x (2) 3/4" SLOTS

VAV 2-1

(2) LSD-150 48" x (2) 3/4" SLOTS

8/10

VAV 2-2

VAV 2-3

8/8

8/10

CG-150CG-150CG-150CG-150

CG-300

10/12VAV 2-4

(2) LSD-150 48" x (2) 3/4" SLOTS

(2) LSD-240 48" x (3) 3/4" SLOTS

10/12

CG-240

CG-240

CD-150

CD-175 CD-175

VAV 2-512/12

(2) LSD-270 48" x (3) 3/4" SLOTS

CG-270

CG-270

VAV 2-7

CD-75

CD-110 CD-110

CD-110CD-90

VAV 2-8

8/8

CG-330

CG-90

VAV 2-9

CD-90

VAV 2-10

CG-90

8/8

CD-75

CD-80

VAV 2-11

14/12

VAV 2-12

CG-80

8/8

CD-75

CG-485

12

/10

12/10

VAV 2-14

CD-140

CD-140

8/10

8/10

VAV 1-32

VAV 1-30

SR-54018x10

SR-54018x10

18/12

CD-200

LSD-125

24/12

CG-2000

CD-150

VAV 2-13

CD-120

CD-120

CD-110

CG-120

CG-120

VAV 2-15

CD-130

CG-130

14/1212/12

VAV 2-16

CD-125

CD-75 CD-175

CD-100 CD-100

CD-100 CD-110

M9

17

ER-1008x8

ER-1008x8

ER-1008x8

ER-1008x8

ER-1008x8

ER-30012x12

12/10

12

/8

3

ER-41012x12

M

12/10

8/8

8/8

ER-1008x8

ER-508x8

CG-350

VAV 1-1 VAV 1-2

VAV 1-3

VAV 1-6

VAV 1-5

8/10

12/12

14

/12

32

/12

CG-275

CG-250

CG-150

CG-150 CG-150

CG-150 CG-150

CG-50

CG-130CG-130CG-130

CG-250

CG-250

LSD-150 48" x (2) 3/4" SLOTS

LSD-125 48" x (2) 3/4" SLOTS

M

12/101

2

(3) LSD-150 48" x (2) 3/4" SLOTS

(2) LSD-150 48" x (2) 3/4" SLOTS

LSD-130 48" x (2) 3/4" SLOTS

LSD-250 48" x (3) 3/4" SLOTS

12/10 8/10

8/1

0

4

4 4 4 4 4

444 4

CD-130 CD-130

CD-175

CD-130

CD-50

10/10 8/10

8/812/10

CD-125

8/8

12/108/10

10/10VAV 1-8

VAV 1-7

CD-175 CD-175

M

CG-360

(2) CD-155

12/10

4

4

4 CD2-50

CG-305

VAV 1-4

30

/18

30

/20

CG-210

12

/12

12

/10

8/1

0

8/10

55

8/8

CD-170 CD-170

VAV 1-11 VAV 1-12

CD-180

VAV 1-10

CD-170 CD-170

10

/10

10

/10

4

18/1012/10 8/10

8/8

8/10VAV 1-31

8/10

8/8

10/10

CD-125

(2) LSD-150 48" x (2) 3/4" SLOTS

(2) LSD-150 48" x (2) 3/4" SLOTS

(2) LSD-150 48" x (2) 3/4" SLOTS

8/8

10/8

(2) ER-275 12x6

8/8

8/8

8/8

20

/14

28

/14

30

/16

36/1630/2018/1416/14

12/8

8/10

8/10

10/10

34

/12

24

/12

14

/12

CG-110

52/22

54

/20

2

M4.2

8/8

13

S

20

4

4

5

4

4

VAV 2-6

5

4 4 4

4

411

8/8

4

10/10

20

12

5

4

5

1 2 3 4 5 6 7 8 9 11 12 17 20 21 22 23 25 26

A

B

E

F

I

J

LL

N

O

32282724 30 31

S

K

14 18 19

Q

P

13

8/1

0

ER-1008x8

18/14

8/8

CG-500

12/12

4

4

4

4

CG-230

CG-270

20/10

CG-110

SR-53518x10

AFMS

14

10

ER-33012x12

12/8

12/10

15

MER-60018x10

ER-30012x6

ER-30012x6

12/6 12/10

12/10

M12/8

ER-30012x12

6

M

7

8M

BD

M

19

12

/10

CD2-95CG-95

4

ER-508x8

8/8

8/8

18

8/8

5

F

F

F

(2) LSD-150 48" x (2) 3/4" SLOTS

8/1

08/1

08/1

08/1

0

CD-200

STORAGE

1111

F

F

F

21

FS

SPS 22

SPS 23

S

FS

MECH.

1223

TG-1008x8

SR-27512x6

ER-44012x12

12/8

TG-135020x20

24/10

M

1

24

16

16

1

1

Hall

1006

1. 12/10 EXH DUCT UP THRU ROOF TO EF-1.



4. 8/8 TRANSFER DUCT.






10. DUCT MOUNTED SMOKE DETECTOR FURNISHED BY DIV. 26 CONTRACTOR. INSTALLED IN DUCTWORK BY DIV. 26 CONTRACTOR.

11. 48/36 INTAKE DUCT UP THRU ROOF TO GRV-3.



14. 66/36 RELIEF DUCT UP THRU ROOF TO GRV-2.

15. 12/6 DUCT DN TO ER 12X6. BOTTOM OF REGISTER SHALL BE 6' AFF.




19. BALANCE TO 7330 CFM.

20. 18/14 TRANFER DUCT.

21. 8/8 EXH DUCT DN TO 12" AFF. TERMINATE WITH OPEN DUCT.

22. STATIC PRESSURE SENSOR FOR AHU-1 FAN CONTROL.

23. STATIC PRESSURE SENSOR FOR AHU-2 FAN CONTROL.

24. DISCONNECT AND RELOCATE EXISTING DENTAL HOOD AND 36" x 3-1/2" TO 10" DIAMETER TRANSITION DUCT FROM OWNERS EXISTING FACILITY. VERIFY EXACT LOCATION AND CONDITIONS. CAP EXISTING ROOF PENTRATION AIR AND WATER TIGHT. INSTALL EXISTING RELOCATED 48" x 24" HOOD AND 36" x 3-1/2" TO 10" DIAMETER TRANSITION DUCT WITH NEW 10" DIAMETER EXHAUST DUCT UP THRU ROOF TO RAIN CAP. RAIN CAP SHALL BE 8'-0" ABOVE ROOF LEVEL, PROVED GUY WIRES AS REQUIRED. VERIFY EXACT MOUNTING HEIGHT WITH OWNER.

A. DUCT SIZES SHOWN ON PLANS ARE CLEAR INSIDE DIMENSIONS WHERE DUCTWORK IS INTERNALLY LINED. INCREASE DIMENSIONS OF SHEET METAL ACCORDINGLY.

B. ALL TRANSFER DUCTS SHALL BE INTERNALLY LINED WITH 1" ACOUSTIC LINER.

C. MAINTAIN UNOBSTRUCTED CLEARANCE TO THE ENTIRE BOTTOM PANEL OF ALL VAV BOX/REHEAT COILS.

D. DIFFUSER BRANCH DUCT SIZE SHALL BE THE SAME AS THE DIFFUSER NECK SIZE UNLESS OTHERWISE NOTED.

E. PROVIDE BALANCING DAMPER FOR EACH SUPPLY OUTLET AND EXHAUST INLET, UNLESS THERE IS ONLY ONE DIFFUSER FOR A VAV BOX.

F. REFER TO VAV/REHEAT COIL TERMINAL UNIT SIZING SCHEDULE FOR VAV BOX INLET DUCT SIZES.

G. REFER TO CEILING DIFFUSERS SIZE SCHEDULE FOR DIFFUSERS NECK SIZES.

H. ALL CEILING GRILLES (RETURN AIR) SHALL BE 24"x12" UNLESS NOTED OTHERWISE.

I. PROVIDE PRICE MODEL RAC RETURN AIR CANOPY UNLESS NOTED OTHERWISE.

J. TEMPERATURE CONTROL CONTRACTOR SHALL FURNISH ALL MOTORIZED DAMPERS FOR INSTALLATION BY MECHANICAL CONTRACTOR.

K. COODINATE DUCTWORK INSTALLATION WITH OTHER TRADES. WHERE IT IS POSSIBLE UTILIZE JOIST SPACE.

Level 10' - 0"

22

/78

16/78

18

/78

AHU-2

4" CONCRETE PAD

GRV-2

36

/66

18

/78

22/52

48/2420/54

52/22 24/48

SA-2BSA-2A

48/60 RELIEF DUCT THRU ROOF

10

S

ABD C

AFMS




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

ëáÖå~íìêÉW

f=ÜÉêÉÄó=ÅÉêíáÑó=íÜ~í=íÜáë=éä~åI=ëéÉÅáÑáÅ~íáçåI=çê=êÉéçêí=ï~ë=éêÉé~êÉÇ=Äó=ãÉ=çê=ìåÇÉê=ãó=ÇáêÉÅí=ëìéÉêîáëáçå=~åÇ=íÜ~í=f=~ã=~=Çìäó=iáÅÉåëÉÇ=mêçÑÉëëáçå~ä=båÖáåÉÉê=ìåÇÉê=íÜÉ=ä~ïë=çÑ=íÜÉ=ëí~íÉ=çÑ=jáÅÜáÖ~åK



1112 North 5th StreetMinneapolis, MN 55411

(612) 343-5965

1624 North Riverfront DriveMankato, MN 56001

(507) 625-7869

018131.00

07/06/2020

SSS

07/06/2020

Bay Mills

Health

Center12455 W. Lakeshore Drive

Brimley, Michigan 49715

M4.2

First Floor

Plan - North -

HVAC

EDI#19-002

6201068139

Steve S. Schreurs

AE, LS

8' 16'4'01/8" = 1'-0"M4.2

1 First Floor Plan - North - HVAC

0 4' 8'2'1/4" = 1'-0"M4.2

2 Mechanical 1223 - Section 2

NORTH


^ÇÇÉåÇìã=@O MULOMLOMOM




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

ëáÖå~íìêÉW





(612) 343-5965


(507) 625-7869

018131.00

07/06/2020

SSS

07/06/2020

Bay Mills

Health

Center12455 W. Lakeshore Drive

Brimley, Michigan 49715

M6.1

Mechanical

Schedules

EDI#19-002

6201068139

Steve S. Schreurs

AE, LS



1

LIGHT FIXTURE WITH EMERGENCY BALLAST

SYMBOL

*** DISTANCE TO HIGHEST OPERABLE PART OF EQUIPMENT

VERIFYAS NOTED SURFACE BRANCH CIRCUIT PANEL (250-V OR LESS)

2 POLE SINGLE THROW SW.

SINGLE POLE SW.

LIGHT ON CORD REEL (TYPE DENOTED)

LIGHTING CHANNEL WIRE (TYPE DENOTED)

SEPARATE PILOT LIGHT

DIMMER SWITCH

MOMENTARY CONTACT SWITCH

OCCUPANCY SENSOR SWITCH

PUSH BUTTON

SINGLE RECEPT.

FAN SPEED CONTROL

TIME DELAY SWITCH

SPLIT DUPLEX RECEPT.

FOURPLEX RECEPT.

DUPLEX RECEPT.

RECEPT ON EMERGENCY CKT (DUPLEX SHOWN)

ISOLATED GROUND RECEPT (DUPLEX SHOWN)

240 VOLT RECEPT.

EQUIPMENT PLUG

RECEPT ON DROP CORD (DUPLEX SHOWN)

RECEPT ON CORD REEL (DUPLEX SHOWN)

ALL DISTANCES ARE TO CENTER OF DEVICE OR EQUIPMENT UNLESS OTHERWISE NOTED. DEVICES INDICATED AT 48" MAY NOT BE INSTALLED WITH ANY OPERABLE PART HIGHER THAN 48". DEVICES MAY BE INSTALLED IN CONCRETE MASONRY UNITS WITH THE TOP OF THE DEVICE AT 48".

AS NOTED

* DISTANCE ABOVE TOP OF DOOR FRAME

J

TIMER SWITCH

AS NOTED

AS NOTED

48"

48"2

3

KEYED SW.

SW. W/PILOT

3-WAY SW.

4-WAY SW.

L

** DISTANCE TO TOP OF EQUIPMENT OR DEVICE

EXISTING TO REMAIN

DASHED SYMBOL INDICATES REMOVED

SOLENOID VALVE

48"

48"

48"

AS NOTED

H

T

TC

AS NOTED

72"**

72"**

PS

OS

FS

R

72"**

72"**

72"**

48"

72"**

72"**

VERIFY

VERIFY

SF-1

T1

BUS DUCT WITH PLUG UN DISCONNECT (FUSED)

LIGHT LEVEL SENSOR - TYPE DENOTED

TIME CONTROL SWITCH (TIME SWITCH)

HUMIDISTAT

THERMOSTAT

PHOTOCELL

ENCLOSED CIRCUIT BREAKER

PRESSURE SWITCH

RELAY

48"

84"

AS NOTED

84"

COMB. MOTOR STARTER (NON-FUSED)

MAG. MOTOR STARTER OR CONTACTOR

SAFETY DISC. SW. (FUSED)

SAFETY DISC. SW. (NON-FUSED)

COMB. MOTOR STARTER (FUSED)

MANUAL MTR. STR. (W/OVERLOADS)

POWER OR DISTRIBUTION PANEL

MOTOR (SEE SCHEDULE)

TRANSFORMER (TYPE DENOTED)

MOTOR HORSEPOWER RATED SWITCH

DAMPER MOTOR

SPECIAL CABINET (TYPE DENOTED)

48"***

20"

48"

20"

J

DESCRIPTION

WALL MOUNTED LIGHT (TYPE DENOTED)

POLE MOUNTED LIGHT (TYPE DENOTED)

RECESSED LIGHT (TYPE DENOTED)

SURFACE MOUNTED DOWNLIGHT (TYPE DENOTED)

EXIT SIGN (TYPE DENOTED)

SUSPENDED OR PENDANT LIGHT (TYPE DENOTED)

TRACK AND TRACK LIGHT (TYPES DENOTED)

SURFACE LIGHT (TYPE DENOTED)

STRIP LIGHT (TYPE DENOTED)

EMERGENCY BATTERY LIGHT (TYPE DENOTED)

RECESSED LIGHT (TYPE DENOTED)

POLE MOUNTED FLOODLIGHT (TYPE DENOTED)PER SCHED

PER SCHED

AS NOTED

12"*

96"

HT AFF

AS NOTED

SYMBOL

AS NOTED

AS NOTED

J J

2

1

84" A

P

HT AFF

20"

20"

SYMBOL

A

GROUND CONNECTION - EXOTHERMIC WELD

GROUND CONNECTION TO STEEL OR STRUCTURE

SPECIAL CONNECTION (SEE SCHEDULE)

SPECIAL RECEPT. OR CONN. (SEE SCHEDULE)

JUNCTION BOX

PULL BOX

GROUND ROD (PLAN VIEW)

CLOCK (TYPE DENOTED)

POWER POLE (OPEN OFFICE STYLE)

MULTIOUTLET ASSEMBLY (TYPE DENOTED)

MULTIOUTLET ASSEMBLY (TYPE DENOTED)

DESCRIPTION HT AFF

GAS DETECTOR (TYPE DENOTED)

PROJECTOR CONTROL OUTLET

**** DISTANCE BELOW CEILING

WEATHERHEAD

ANTENNA

***** DISTANCE TO BOTTOM OF DEVICE

EQUIPMENT GROUND OUTLET

X-RAY FILM VIEWER (SEE SPECIFICATIONS)

DOOR SIGNAL - APT. UNIT

SPEAKER (WALL OR CEILING MT.)

SURFACE MT SPEAKER SUSPENDED FROM CEILING

S

MICROPHONE OUTLET

HORN TYPE SPEAKER

VOLUME CONTROLV

BUZZER

D

NFV-4x2

BELL

LADDER RACK (TYPE DENOTED)

CABLE TRAY (TYPE DENOTED)

INFORMATION OUTLET (TYPE DENOTED)

WALL TELEPHONE OUTLET (TYPE DENOTED)

INTERCOM OUTLET LOCATION

TELEPHONE OUTLET (TYPE DENOTED)

WALL DICTATION OUTLET LOCATION

MULTIPLE SERVICE OUTLET (TYPE DENOTED)

DICTATION OUTLET LOCATION

TELEVISION OUTLET

D

W

W

F.A. PULLSTATION

F.A. DOOR CLOSER

F.A. DOOR HOLDER

F.A. INDIVIDUAL ADDRESSABLE MODULE

FIRE ALARM SHUT DOWN RELAY

SPRINKLER VALVE TAMPER SWITCH

SPRINKLER FLOW SWITCH

F.A. ZONE ADDRESSABLE MODULE

END OF LINE RESISTOR

SPRINKLER TEMPERATURE SWITCH

SPRINKLER LEVEL SWITCH

SPRINKLER PRESSURE SWITCHT

ELR

FR

CO

F

CO

HEAT DETECTOR (TYPE & TEMP DENOTED)

HT AFF

CONDUIT TRANSITION DOWN

CONDUIT TRANSITION UP

BRANCH CIRCUIT HOME RUN

CONDUIT EXPOSED

CONDUIT STUBBED OUT

CONDUIT CONCEALED BELOW FLOOR

CONDUIT CONCEALED IN WALL OR OVERHEAD

DESCRIPTION

FIRE ALARM CHIME

FIRE ALARM BELL

FIRE ALARM BELL W/STROBE (CANDELAS)

SMOKE DETECTOR (TYPE DENOTED)

FIRE ALARM STROBE (CANDELAS)

FIRE ALARM SPEAKER W/STROBE (CANDELAS)

FLAME DETECTOR (TYPE DENOTED)

DUCT SMOKE DETECTOR (TYPE DENOTED)

REMOTE TEST/STATUS STATION

LINEAR HEAT DETECTOR

FIRE ALARM CHIME W/STROBE (CANDELAS)

R/F135

UV/IR

R/F135

DESCRIPTION

FIRE ALARM HORN

FIRE ALARM HORN W/STROBE (CANDELAS)

SYMBOL

F

110cd

UTILITY SERVICE POWER POLE (SITE)

GENERATOR (KVA DENOTED)25 KVA

ELECTRICAL SYMBOL LEGEND

48"

48"

48"

48"

48"

48"

48"

48"

48"

48"

48"

48"

48"

20"

20"

20"

20"

20"

20"

20"

FOURPLEX RECEPTACLE ON EMERGENCY CIRCUIT20"

4

K

D

OS

MC

T

TD

SP

M

B

P

PB

VARIABLE FREQUENCY DRIVE

MUSHROOM SWITCH

LS

CP

OCCUPANCY SENSOR - TYPE DENOTED

FLOAT SWITCH

IC

20"

20"

20"

48"***

20"

48"***

84"

84"

20"

20"

D

G

J

CHIME

S

S S

S

M

P

90"**

48"***

48"

8"****

90"**

90"**

90"**

90"**

90"**

90"**

90"**

110cd

110cd

110cd

F

F

F

F

F

F

110cd

START/STOP PUSH BUTTON STATION48"

P

60"** FIRE ALARM REMOTE ANNUNCIATOR FA ANNUN

UV/IR

Z

I

F S

DURESS PUSHBUTTON - SURFACE MOUNTED

DURESS PUSHBUTTON - WALL MOUNTED

1 KEYED NOTE (SEE SCHEDULE)

ELECTRICAL ABBREVIATIONS LIST

ELECTRICAL DRAWINGS

ELECTRICAL SYMBOL NOTES

SF-1

T1

L1

1

EXIT LIGHTS. STEM INDICATES WALL MOUNTING. NO STEM INDICATES CEILING MOUNTING. SHADED AREA INDICATES ILLUMINATED FACE(S). ARROW INDICATES DIRECTIONAL ARROW ON ILLUMINATED FACE(S).

THE CONTROL DEVICE DESIGNATION IS INDICATED BY A LOWER CASE LETTER. EXAMPLE: SWITCH, OCCUPANCY SENSOR AND DAYLIGHT SENSOR WITH "a" TO CONTROL LIGHTING FIXTURES WITH SWITCH DESIGNATION INDICATED BY "a" INSIDE A ROOM/AREA.

THE CONTROL DEVICE WITH A NUMBER WITH CIRCLE AROUND IT REPRESENTING THAT IT IS CONTROLLING A RELAY. EXAMPLE: SWITCH, OCCUPANCY SENSOR AND DAYLIGHT SENSOR WITH "5" TO CONTROL LIGHTING FIXTURES WITH RELAY NUMBER INDICATED BY "5"

MOTOR CONNECTIONS. THE MOTOR IS INDICATED BY A NUMBER WITHIN ORCHARACTERS ADJACENT TO THE MOTOR SYMBOL. SEE THE MOTOR AND EQUIPMENTSCHEDULE FOR THE MOTOR DESCRIPTION AND ELECTRICAL REQUIREMENTS.

TRANSFORMERS. THE TRANSFORMER TYPE IS INDICATED BY A NUMBER FOLLOWINGTHE UPPER CASE LETTER "T". SEE THE TRANSFORMER SCHEDULE OR THE SINGLE LINEDIAGRAM FOR THE TRANSFORMER DESCRIPTION AND REQUIREMENTS. EXAMPLE:TRANSFORMER TYPE "T1".

PANELBOARDS. PANELBOARD DOORS MAY BE SHOWN TO INDICATE OPENING SIDE OFRECESSED PANELBOARDS. SEE PANELBOARD IDENTIFICATION FOR DESIGNATIONCODES.

PLAN NOTE. SEE THE PLAN NOTES ON THAT SHEET FOR THE NOTE NUMBERINDICATED IN THE HEXAGON.

HOME RUN TO BRANCH CIRCUIT PANELBOARD. THE PANELBOARD DESIGNATION ISSHOWN ADJACENT TO THE HOME RUN ARROW AS A NUMERATOR AND THE CIRCUITDESIGNATION IS SHOWN AS THE DENOMINATOR. CIRCUIT BREAKER SIZES(AMPS/NUMBER OF POLES) ARE SHOWN IN THE PANELBOARD SCHEDULE WITH THECORRESPONDING PANELBOARD AND CIRCUIT DESIGNATION. EXAMPLE: HOME RUN TOPANELBOARD LPN-102; CIRCUITS 1, 3, 5.

A2H1/1

bLIGHT FIXTURE TYPE

CIRCUIT NUMBER

PANEL NAME

SWITCH DESIGNATION

1 RELAY NUMBER (IF APPLICABLE)

E1H1/14

H3/1,3,5

A. PENETRATIONS IN WALLS REQUIRING PROTECTED OPENINGS MUST BE FIRESTOPPED WITH AN APPROVED MATERIAL.

1. CONDUITS MAY PENETRATE WALLS OR PARTITIONS, PROVIDED THEY ARE FIRE-STOPPED.

2. OPENINGS FOR STEEL ELECTRICAL BOXES NOT EXCEEDING 16 SQUARE INCHES ARE PERMITTED PROVIDED OPENINGS DO NOT AGGREGATE MORE THAN 100 SQUARE INCHES FOR ANY 100 SQUARE FEET OF WALL OR PARTITION.

3. OUTLET BOXES ON OPPOSITE SIDES OF WALLS OR PARTITIONS MUST BE SEPARATED BY A HORIZONTAL DISTANCE OF 24 INCHES.

B. LIGHT FIXTURES AND OTHER APPARATUS SUPPORTED BY THE ACOUSTICAL CEILING GRID MUST MEET THE REQUIREMENTS OF NEC SECTION 410.16, MEANS OF SUPPORT.

C. RECESSED LIGHTING FIXTURES INSTALLED IN FIRE RATED CEILING ASSEMBLIES SHALL BE FIRE RATED FIXTURES BEARING THE UL FIRE RATED LABEL. FIXTURES SHALL BE INSTALLED IN ACCORDANCE WITH THE UL FIRE RESISTANCE DIRECTORY, AND SHALL INCLUDE A FIRE RATED ENCLOSURE INSTALLED OVER THE FIXTURE THAT MEETS THE REQUIREMENTS OF THE UL FIRE RESISTANCE DIRECTORY.

SPECIFIC CODE NOTES

EMEM

NIGHT LIGHT FIXTURE WITH EMERGENCY BALLAST

ADA DOOR OPENER

HD

O

KITCHEN EQUIPMENT TAG (SEE SCHEDULE)##

CEILING MOUNT WIRELESS ACCESS POINT

48"*** INMATE WALL PHONE (TYPE DENOTED)I

48"*** VIDEO VISITATION (TYPE DENOTED)VV

EMERGENCY POWER OFF BUTTON

RELAY NUMBER##

F F

F

1P 1 POLE (2P, 3P, 4P, ETC.)

A AMPEREAC ABOVE COUNTER OR AIR

CONDITIONERACLG ABOVE CEILINGADO AUTOMATIC DOOR OPENERAF AMP FRAMEAFF ABOVE FINISHED FLOORAFG ABOVE FINISHED GRADEAFI ARC FAULT CIRCUIT

INTERRUPTERAHU AIR HANDLING UNITAL ALUMINUMALT ALTERNATEAMP AMPEREAMPL AMPLIFIERANNUN ANNUNCIATORAPPROX APPROXIMATELYAQ-STAT AQUASTATARCH ARCHITECT, ARCHITECTURALAS AMP SWITCHAT AMP TRIPATS AUTOMATIC TRANSFER SWITCHAUTO AUTOMATICAUX AUXILIARYAV AUDIO VISUALAWG AMERICAN WIRE GAUGE

BATT BATTERYBD BOARD BLDG BUILDINGBMS BUILDING MANAGEMENT

SYSTEM

C CONDUITCAB CABINETCAT CATALOGCATV CABLE TELEVISIONCB CIRCUIT BREAKER CCTV CLOSED CIRCUIT TELEVISIONCKT CIRCUITCLG CEILINGCOMB COMBINATIONCMPR COMPRESSORCONN CONNECTIONCONST CONSTRUCTIONCONT CONTINUATION OR CONTINUOUSCONTR CONTRACTORCONV CONVECTORCP CIRCULATING PUMPCRT CATHODE-RAY TUBECT CURRENT TRANSFORMERCTR CENTERCU COPPER

DCP DOMESTIC WATERCIRCULATING PUMP

DEPT DEPARTMENTDET DETAILDIA DIAMETERDISC DISCONNECTDIST DISTRIBUTIONDN DOWNDPR DAMPERDS SAFETY DISCONNECT SWITCHDT DOUBLE THROWDWG DRAWING

EC ELECTRICAL CONTRACTORELEC ELECTRIC, ELECTRICALELEV ELEVATOREM EMERGENCYEMS ENERGY MANAGEMENT SYSTEMEMT ELECTRICAL METALLIC TUBINGEP ELECTRIC PNEUMATICEQUIP EQUIPMENTEWC ELECTRIC WATER COOLEREXIST EXISTINGEXH EXHAUSTEXP EXPLOSION PROOF

FA FIRE ALARMFABP FIRE ALARM BOOSTER POWER

SUPPLY PANELFACP FIRE ALARM CONTROL PANELFCU FAN COIL UNITFIXT FIXTUREFLR FLOORFLUOR FLUORESCENT

FU FUSEFUDS FUSED SAFETY DISCONNECT

SWITCH

GA GAUGEGAL GALLONGALV GALVANIZEDGC GENERAL CONTRACTORGEN GENERATORGFI GROUND FAULT CIRCUIT INTERRUPTERGFP GROUND FAULT PROTECTORGND GROUNDGRS GALVANIZED RIGID STEEL (CONDUIT)GYP BD GYPSUM BOARD

HOA HANDS-OFF-AUTOMATIC SWITCHHORIZ HORIZONTALHP HORSEPOWERHPF HIGH POWER FACTORHT HEIGHTHTG HEATINGHTR HEATERHV HIGH VOLTAGEHVAC HEATING, VENTILATING AND

AIR CONDITIONINGHWP HYDRONIC WATER PUMP

IC INTERRUPTING CAPACITYIG ISOLATED GROUNDIMC INTERMEDIATE METAL CONDUITINCAND INCANDESCENTIR INFRAREDI/W INTERLOCK WITH

J-BOX JUNCTION BOX

KV KILOVOLTKVA KILOVOLT-AMPEREKVAR KILOVOLT-AMPERE REACTIVEKW KILOWATTKWH KILOWATT HOUR

LOC LOCATE OR LOCATIONLT LIGHTLTG LIGHTINGLTNG LIGHTNINGLV LOW VOLTAGE

MAX MAXIMUMMAG.S MAGNETIC STARTERM/C MOMENTARY CONTACTMC MECHANICAL CONTRACTORMCB MAIN CIRCUIT BREAKERMCC MOTOR CONTROL CENTERMDC MAIN DISTRIBUTION CENTERMDP MAIN DISTRIBUTION PANELMFR MANUFACTURERMFS MAIN FUSED DISCONNECT SWITCHMH MANHOLEMIC MICROPHONEMIN MINIMUMMISC MISCELLANEOUSMLO MAIN LUGS ONLYMMS MANUAL MOTOR STARTERMOA MULTIOUTLET ASSEMBLYMSP MOTOR STARTER PANELBOARDMSBD MAIN SWITCHBOARDMT MOUNTMT.C EMPTY CONDUITMTS MANUAL TRANSFER SWITCHMTR MOTOR, MOTORIZED

N.C. NORMALLY CLOSEDNEC NATIONAL ELECTRICAL CODENEMA NATIONAL ELECTRICAL

MANUFACTURER'S ASSOCIATION

NFDS NON-FUSED SAFETY DISCONNECT SWITCH

NIC NOT IN CONTRACTNL NIGHT LIGHTN.O. NORMALLY OPENNPF NORMAL POWER FACTORNTS NOT TO SCALE

OH OVERHEADOL OVERLOADS

PA PUBLIC ADDRESSPB PULL BOX OR PUSHBUTTON

PA PUBLIC ADDRESSPB PULL BOX OR PUSHBUTTONPE PNEUMATIC ELECTRICPED PEDESTAL PF POWER FACTORPH PHASEPIV POST INDICATING VALVEPNL PANELPP POWER POLEPR PAIRPRI PRIMARYPROJ PROJECTIONPRV POWER ROOF VENTILATORPT POTENTIAL TRANSFORMERPVC POLYVINYL CHLORIDE (CONDUIT)PWR POWER

QUAN QUANTITY

RCPT RECEPTACLEREQD REQUIREDRM ROOMRSC RIGID STEEL CONDUITRTU ROOF TOP UNIT

SC SURFACE CONDUITSEC SECONDARYSHT SHEETSIM SIMILARS/N SOLID NEUTRALSPEC SPECIFICATIONSPKR SPEAKERSP SPARESR SURFACE RACEWAYSS STAINLESS STEELSSW SELECTOR SWITCHS/S STOP/START PUSHBUTTONSSTA STATIONSTD STANDARDSURF SURFACE MOUNTEDSW SWITCHSWBD SWITCHBOARDSYM SYMMETRICALSYS SYSTEMTEL TELEPHONETEL/DATA TELEPHONE/DATATERM TERMINALTL TWIST LOCKTR TAMPER RESISTANTT-STAT THERMOSTATTTC TELEPHONE TERMINAL

CABINETTV TELEVISIONTVTC TELEVISION TERMINAL CABINETTYP TYPICAL

UC UNDER COUNTERUE UNDERGROUND ELECTRICALUG UNDERGROUNDUH UNIT HEATERUT UNDERGROUND TELEPHONEUTIL UTILITYUV UNIT VENTILATOR OR ULTRAVIOLET

V VOLTVA VOLT-AMPERESVDT VIDEO DISPLAY TERMINALVERT VERTICALVFD VARIABLE FREQUENCY DRIVEVOL VOLUME

W WATTW/ WITHWG WIRE GUARDWH WATER HEATERW/O WITHOUTWP WEATHERPROOF

XFMR TRANSFORMERXFR TRANSFER

ANGLE@ AT

DELTA' FEET" INCHES# NUMBERØ PHASEC CENTER LINEP PLATELL

CONDUIT SLEEVE (SIZE DENOTED)

UNDERFLOOR RACEWAY SYSTEM

FLOOR BOX FURNITURE FEED (TYPE AS NOTED)

POKE THROUGH FURNITURE FEED (TYPE AS NOTED)

FLOOR BOX W/RECEPTACLE & DATA (QUANTITIES AS NOTED)

POKE THROUGH WITH DATA (QUANTITIES AS NOTED)

FLOOR BOX WITH RECEPTACLE (QUANTITIES AS NOTED)

FLOOR BOX WITH DATA (QUANTITIES AS NOTED)

POKE THROUGH WITH RECEPTACLE (QUANTITIES AS NOTED)

POKE THROUGH W/RECEPT & DATA (QUANTITIES AS NOTED)

DUPLEX RECEPT. (RELAY CONTROLLED)20"

R

20" R FOURPLEX RECEPT. (RELAY CONTROLLED)

S DA

S DA

EPO

L1

VERIFY RECESSED BRANCH CIRCUIT PANEL (250-V OR LESS)L1

SURFACE BRANCH CIRCUIT PANEL (277/480 VOLT)

RECESSED BRANCH PANEL (277/480 VOLT)

VERIFYH1

VERIFYH1

VERIFY SWITCHBOARD MAIN

GROUND BAR

L1/1 CIRCUIT NUMBER

PANEL NAME

1 RELAY NUMBER (IF APPLICABLE)

b

5

OSb

LSb

OS LS

5 5

TYPICAL LIGHTFIXTURE LABELING TYPICAL RECEPTACLE LABELING

TYPICAL FLOORBOX & POKE THROUGH LABELING

2

4

2

4

QUANTITY OF DUPLEX RECEPTACLES

QUANTITY OF DATA CABLE CONNECTIONS

TYPICAL INFORMATION OUTLET LABELING

4QUANTITY OF DATA CABLE CONNECTIONS

RL2/3

PANEL NAME / CIRCUIT NUMBER

RELAY CONTROLED RECEPTACLE LABELING

SEE RELAY PANEL SCHEDULED AND/OR SHEET NOTES FOR ADDITIONAL INFORMATION.

L3/2,4 CIRCUIT NUMBER(S)

PANEL NAME

12"*

NURSE CALL MASTER STATION

NURSE CALL DOME LIGHT (2 LAMP OR # AS NOTED)

NURSE CALL ANNUNCIATOR PANEL

NURSE CALL EQUIPMENT CABINET

NCM

NURSE CALL EMERG. STATION

NURSE CALL DUTY STATION

NURSE CALL STAFF STATION

NURSE CALL CODE BLUE EMERG. STATION

NURSE CALL SINGLE PATIENT STATION

NURSE CALL DUAL PATIENT STATION2

E

48"***

48"

48"

48"***

48"***

48"

48"

B

D

S

P

P

N2

N2

48"*** NCC

NC ANNUN72"**

1




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

ëáÖå~íìêÉW




ELECTRICAL DRAWINGS


(612) 343-5965


(507) 625-7869

018131.00

07/06/2020

GTN

JSH

07/06/2020

Bay Mills

Health

CenterProject Address

Brimley, Michigan

E0.1

ELECTRICAL

TITLE SHEET

EDI#19-002

Bay Mills Health CenterProject Address

Brimley, Michigan

6201061485

JAY S. HRUBY P.E.

EG-1 GENERATOR COVERAGE

E0.1 ELECTRICAL TITLE SHEET

E1.1 SITE PLAN - ELECTRICAL

E2.1 FLOOR PLAN - SOUTH - LIGHTING

E2.2 FLOOR PLAN - NORTH - LIGHTING

E3.1 FLOOR PLAN - SOUTH - POWER

E3.2 FLOOR PLAN - NORTH - POWER

E3.3 ROOF PLAN - ELECTRICAL

E4.1 FLOOR PLAN - SOUTH - SYSTEMS

E4.2 FLOOR PLAN - NORTH - SYSTEMS

E5.1 POWER RISER DIAGRAM

E5.2 LARGE SCALE PLANS - ELECTRICAL




E6.1 SCHEDULES - ELECTRICAL





E7.1 DETAILS - ELECTRICAL






GENERAL NOTES

PLAN NOTES

OS OS OS OS

OSOSOSOS

OS

OS OS OS

OSOSOS

OS OS OS

OSD D D

DDD

D D D

DDD

D

D D DD

DDD

DDD

D

OS

OS

OS

OS

OS

OS

OS

OS

OS

OS

D

D

OS

OS

D

D

OS

OS

OS

DOS

OS

3

4

DD D

OS

D

D

OS

OS

OS

D

OS

D

D

OS

OS OS

OS OS

OS

OS

OS

OS OS

OS

OS

OS

OS

OS

OS

OS OS

OS OS

OS OS

OS

OS

OS

OS

OS

OS

DOS

OS

OSOS

3

DD

DD

LS

OS

OS

OS D

DD

D

OS

OS

OS

OS

OS

OS OS OS

OS

D D

OSOS

OS

D

D

D D

D D

OSOS

OS

OS

OSOS

4 3

3

OS

OS

OS

OS

OS

OS

OS

OS

OSOS

D D

OS

D

OS

D

33

4

D

OS

OS

OS

OS

OS

OS

OS

D D

OS

OS

D

OS

A. PROVIDE AN ADDITIONAL ELECTRICAL CONNECTION TO ALL EMERGENCY LIGHT FIXTURES. ELECTRICAL CONNECTION TO BE FEED FROM UNSWITCHED LEG OF THE CIRCUIT FEEDING THE LIGHT FIXTURES IN THE ROOM/AREA THEY ARE LOCATED IN.

B. PROVIDE PROPER NUMBER OF CONDUCTORS AND CONTROL WIRES TO ACHIEVE CIRCUITING AND LIGHTING CONTROL AS SHOWN.

C. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR WIRING ALL ELECTRICAL ITEMS SHOWN ON THIS DRAWING.

D. ALL RECESSED LIGHTING FIXTURES IN LAY-IN CEILINGS SHALL BE INSTALLED WITH 6' LONG FLEXIBLE METAL CONDUIT.

E. ALL MOUNTING HEIGHTS FOR LIGHTING FIXTURES ARE TO THE BOTTOM OF THE FIXTURES UNLESS INDICATED OTHERWISE.

F. SEE ARCHITECTURAL EXTERIOR ELEVATIONS FOR MOUNTING HEIGHTS OF EXTERIOR LIGHTING FIXTURES.

G. CONDUIT AND WIRE SHALL NOT BE INSTALLED WITHIN THE COMPOSITE FLOOR SYSTEM.

H. CIRCUIT NUMBERS AT DEVICES CORRESPOND TO PANELBOARD BREAKERS (SEE PANELBOARD SCHEDULE). BRANCH CIRCUITS SHALL BE SIZED ACCORDING TO THE CIRCUIT BREAKER RATING, UNLESS INDICATED OTHERWISE ON THE ELECTRICAL EQUIPMENT SCHEDULE.

I. USE #10 AWG CONDUCTORS FOR 20 AMPERE, 120 VOLT BRANCH CIRCUITS LONGER THAN 75 FEET, UNLESS SPECIFICALLY INDICATED OTHERWISE. THIS SHALL BE REQUIRED FOR THE ENTIRE LENGTH OF THE CIRCUIT.

J. USE #10 AWG CONDUCTORS FOR 20 AMPERE, 277 VOLT BRANCH CIRCUITS LONGER THAN 175 FEET, UNLESS SPECIFICALLY INDICATED OTHERWISE. THIS SHALL BE REQUIRED FOR THE ENTIRE LENGTH OF THE CIRCUIT.

1. PROVIDE WALL MOUNTED DUAL TECHNOLOGY OCCUPANCY SENSOR FOR MANUAL ON/AUTOMATIC OFF CONTROL OF LIGHTING IN THIS ROOM. SEE SPECIFICATION SECTION 26 0923 FOR ADDITIONAL INFORMATION.

2. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR/S WITH REMOTE POWER PACK/S FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. SEE SPECIFICATION SECTION 26 0923 FOR ADDITIONAL INFORMATION.

3. PROVIDE CEILING MOUNTED VACANCY SENSOR/S AND WALL MOUNTED ON/OFF/RAISE/LOWER STATION FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. PROVIDE AUXILIARY RELAY FOR BAS MONITORING. SEE SPECIFICATION 26 0924 FOR ADDITIONAL INFORMATION.

4. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR, CEILING MOUNTED DAYLIGHT AND LOW VOLTAGE SWITCH/ES. PROVIDE 0-10 VOLT DIMMING CONTROLS SWITCH UNLESS NOTED OTHERWISE. (SIMILAR TO WATTSTOPPER DLM SERIES DAYLIGHT AND MOTION SENSOR) FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM.

5. PROVIDE CEILING MOUNTED VACANCY SENSOR/S AND WALL MOUNTED ON/OFF SWITCH FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. PROVIDE AUXILIARY RELAY FOR BAS MONITORING. SEE SPECIFICATION 26 0924 FOR ADDITIONAL INFORMATION.

6. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR/S CONNECTED TO LIGHTING CONTROL RELAY PANEL FOR CONTROL OF LIGHTING AS SHOWN IN THIS SPACE.

7. SEE DETAIL 2/E2.1 FOR LIGHT FIXTURE TYPES AND MOUNTING LOCATIONS IN THIS SPACE.

1

1

Level 10' - 0"

T.O. Parapet-Low16' - 0"

Level 324' - 0"

12 12

1212

H2/37L5

H2/37M5

H2/37M5

H2/37L5

12 12

1212

H2/37L5

H2/37M5

H2/37M5

H2/37L5

TVWY

H2/13H

a

H2/15H

h

H2/13H

a

H2/13H

a

H2/13HE

a

H2/13H

a

H2/13H

a

H2/15HE

eH2/15H

e H2/15H

e H2/15H

e H2/15HE

e

H2/15H

f H2/15HE

f H2/15H

f H2/15H

f H2/15HE

f

H2/15H

g H2/15HE

g H2/15H

g H2/15H

g H2/15HE

gg

2 2

g

2 2

2 2

C.H.HALLWAY

1050

EXAMHALLWAY

1070f f

e e

EXAMHALLWAY

1080

a2

a2

a2

a2

a

2

H2/13HE

a

H2/13E1

H2/13HE

H2/15HE

h

H2/15H

h

H2/15H

h

H2/15HE

h

H2/15H

h

H2/15H

h

H2/15HE

h

H2/15H

h

H2/15H

h

H2/15HE

h

h

2

2h

h

2

2h

1PROCEDUREROOM (POSPRESSURE)

1104


1102

TOILET1103

CONSULT1101

H2/11B

H2/11B

3

H2/15H

e

H2/15H

e

H2/11B

H2/11B

H2/11B

H2/11B

H2/11B

H2/11B

H2/11A

H2/11A

EXAM1086 3

EXAM1087 3

EXAM1088 3

CLEAN1091

1

EXAM10843

EXAM10833

EXAM (NEGPRESSURE)

10823

EXAM10723

EXAM10733

EXAM10743

FLEX OFFICE10753

EXAM1077 3

EXAM1078 3

EXAM1079 3

H2/9B

H2/9B

H2/9B

H2/9B

H2/9B

H2/9B

H2/9B

H2/9B

H2/9B

H2/9B

H2/9B

H2/9B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/15H

f

H2/15H

f

TRIAGE (NEGPRESSURE)

1081H2/9B

H2/9B

3

1

H2/9W2 TOILET

1035

SCALE1076

MED1093

SOILED1092

1

1

H2/9A

H2/9A

H2/9W2

1

STAFFTOILET1070A

STAFFHALLWAY

1090

C.H.HALLWAY

1061

SCALE1085

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

H2/7B

COMMUNITYHEALTH

(BRENDA)

10603

COMMUNITYHEALTH

(THERESA)

10593

COMMUNITYHEALTH

(GINA HE)

10583

COMMUNITYHEALTH

(STEPHANIE)

10573

COMMUNITYHEALTH

(TRANSPORT)

10553

COMMUNITYHEALTH(CONNIE)

10543

COMMUNITYHEALTH

(SHELBY)

10533

COMMUNITYHEALTH

(JOANNT)

10523AMBULANCE

HOLD (negpressure)

10513

H2/5B

H2/5B

H2/5B

H2/5B

H2/5B

H2/5B

H2/5B

H2/5B

H2/5B

H2/5B

C.H. WorkRoom1056

1

CONSULT10713

H2/3B

H2/3B

H2/3B

H2/3B

H2/3B

H2/3B

H2/3B

H2/3B

H2/3B

H2/3B

H2/1C8E

H2/1C8

H2/1C8E

H2/1C8

H2/1C8

H2/1C8E

H2/1C4E

COMMUNITYHEALTH

10623

COMMUNITYHEALTH

10633

COMMUNITYHEALTH

10643

NURSESUPERVISOR

(BETTY)

10653

PROVIDEROFFICE1094A3

PROVIDEROFFICE

1094B3

H2/3B

H2/3B

H2/3B

H2/3HE

H2/3H

H2/3H

H2/3H

H2/3H

H2/3H

H2/3HE

H2/3H

H2/3H

H2/3H

H2/3H

H2/3HE

a

b

ba

NURSE1094 4

b a

b a

b a

b a

b a

a

a

ab

b

ab

PROVIDEROFFICE1094C3

PROVIDEROFFICE1094D3

H2/3B

H2/3B

H2/3B

H2/17G

H2/17G

H2/17G

H2/17G

H2/17B

MAMMO1038

STAFFMOTHERS

ROOM

1031

3

3

2

2

1

H2/17W2

H2/17HE

H2/17H

H2/17HE

H2/17H

H2/17H

HALL1037

STAFF WORK1037A3

TOILET1040

H2/13HE

H2/13H

2

WAIT1036

HALLWAY1034A

HALLWAY1034B

VEST.1038A

H2/17A

H2/17A

H2/17H

H2/17A

H2/17A

H2/17A

H2/17A

H2/17A

H2/17G

1

CHANGE1039A

RADIOLOGY1039

H2/21B

H2/21BE

H2/21B

H2/21BE

H2/21B

H2/21B

H2/21BE

H2/21B

H2/19C4E

H2/19C4

H2/19C4

H2/19C4

HOUSEKEEPING1030 5

ba

a

ab

3

b a

aa

a a

H2/17E1

2

2H2/17

W2H2/17W2

H2/19D1

H2/17D1

H2/17D1

H2/17D1

H2/17D1

TOILET1033B

TOILET1033A

H2/19HE

i H2/19H

i H2/19H

i H2/19HE

i ii2

i

2

i

2

H2/19HE

i

H2/19HE

i

i2

HALLWAY1024

HALLWAY1025

3PHARMACY

COSULT1022

PHARMACYCONSULT

1021

3

H2/21K

H2/21KE

H2/21K

H2/21K

H2/21KE

H2/21K

H2/21K

H2/21K

H2/21K

H2/21K

H2/21KE

H2/21D1

H2/21D1E

H2/21D1

H2/21D2

H2/21D2

H2/21K

H2/21K

H2/21K

H2/21KE

H2/21K

H2/21K

H2/21K

H2/21K

H2/21W2

1

PHARMACYTOILET

1023B

PHARMACYOFFICE1023A

3

H2/21B

H2/21B

H2/21KE

H2/21K

H2/25B

H2/25B

H2/25B

H2/25B

H2/25B

H2/25B

H2/25B

H2/25B

H2/25B

H2/25B

H2/25B

H2/25B

H2/25HE

H2/25H

H2/25HE

H2/25B

H2/25HE

H2/25H

H2/25B

H2/25B

H2/25HE

H2/25D2

H2/25D2

H2/25D2

OUTREACH(CHELSEY)

1019

INSURANCE(SHELLEY)

1018

SWITCHBOARD1017

WORK1012RE-APPOINT/

PAYMENT1011

CENTRALREGISTRATION

1013

PRC(MIKALA)

1015

PRC(ASHLEY)

1014

33

3 3

3

PATIENTREG/

CONSULT

1016

3

j2

j2

j2

2 2

2 2

H2/23D1

j

H2/23D1E

j

H2/23D1E

j

H2/17W11

H2/17W6

H2/17W4

H2/17W4

H2/17W6

H2/17W11

2

2

2

2

Bio Hazard1043

MECH1042

STORAGE1041

STAFFBREAKROOM

1029OFFICE

1028OFFICE

1027

DATA1026

MEETINGROOM1002

VESTIBULE1001

MOTHERSROOM1009

WOMENSTOILET

1008

DRAW1133

MEN'STOILET

1010

PROCEDUREHALWAY

1100PROCEDURE

HALLWAY1105

HALLWAY1004

WAITING1007

HALLWAY1007A

STORAGE1002A


1106

DENTALWAIT

1200

HALLWAY1005

REGISTRATIONHALL

1003

Hall1006

PHARMACYWORK1023

PHARMACYRETAIL1020A

OPTICALSALES

1153HALLWAY

1007B

PHARMACYWAITING

1020B

H2/1C8

H2/19H

H2/19H

H2/19H

H2/19H

H1H2 L1

L2

L3

L7

L8

L9

L10

H2/19B

H2/19B

H2/19B

H2/19B

H2/19E1

H2/17B

H2/17B

H2/19E1

3

k

k

k k

kk

3

3 3

H2/19H

H2/19E1

a a2 2

a a a a

a a

b

b b

b b b

b

b

b

b

b

b

b b

b

b

b

b

b

b

b

b

b

b b

b

b

H2/13HE

a

H2/13HE

a

i

H2/27CC

H2/27CC

4 4

H2/27DD

4

H2/27CC

4

MS2MS2-DS1MS2-DS2MS2-DS3RCP-H2

H2/21J4F H2/21

J4F

H2/21J4F H2/21

J4F

H2/21J4F H2/21

J4F

H2/13D1

H2/13D1

H2/13J4

H2/13J4E

H2/13J4

H2/13J4

a

a

a

a

a

H2/23J4E

H2/23J4

H2/23J4

H2/23J4

j

j

j

j

H2/23D1E

j

H2/23D1E

j

H2/23D1

j

?

H2/23D1

j

H2/39L24

H2/39L24

H2/37D2

H2/37D2

2

E2.1

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35L4

H2/35D1

H2/35D1

H2/35D1

H2/35D1E

H2/35D1

H2/35D1E

H2/35D1

H2/35D1

H2/35D1

H2/35D1

H2/35D2

H2/35D2

H2/35D2

H2/35D2

H2/37D1

H2/37D1E H2/37

J4E

H2/37J4

H2/37J4E

H2/37J4

H2/37J4

H2/37J4

H2/37J4

H2/37D1

H2/37D1

H2/37D1E

H2/37D1

H2/37D1E

H2/37D1E

H2/37D1E

H2/37D1

H2/37D1

H2/37D1

H2/37D1E

H2/37J4E H2/37

J4

H2/37J4

H2/37J4

H2/37J4E

H2/37J2

H2/37J2

H2/37J2

H2/37J2

H2/37J2

H2/37J2

H2/37J2

7

7

7

7

8 8 8 8

8

8

8

8

8

8

8

8

8 8 8 8

9 9

9

9 9

9

9 9

9 9

9 9

8,9

H2/35D1E

8,9

8,9

8,9

H2/35D1E

6

6

6

6

H2/37J2

H2/37J4

10 10

10 1010

10

10

10

1010

10

10

10

11

10 10

10

10

10

1010

1110

10

10

10

10

10

10

10

10

10 10

H2/37D1

H2/37D1

10,12

6

6

10,12

10

10

10

10,126

H2/39P2

H2/39P2

H2/39P2

a b

c

c

c

H2/39P1

H2/39P1

a

a

a

b b

a,b,c

a,b,c3

2

b

b

b

b

b

b

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

11

11

12

12

17

17

21

21

22

22

23

23

25

25

26

26

N

O

32

32

28

28

27

27

31

31

T

V

29

29

30

30

W

Y

AA

DD

EE

HH

II

JJ

KK

LL

MM MM

NN NN

24

24

16

16

15

15

10

10

GG

FF

BB

S

Q

P

H2/37J15F

10

H2/25D2

H2/25D2

H2/25D2

H2/25D2

7

7

7H2/35

P3H2/35

P3

H2/35P3

H2/35P3

7

H2/35P3

7

H2/35N7

7

H2/35D1E

9

H2/35D1E

9

H2/2RE

H2/2RE

H2/2RE

H2/2RE

H2/2RE




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

ëáÖå~íìêÉW





(612) 343-5965


(507) 625-7869

018131.00

07/06/2020

GTN

JSH

07/06/2020

Bay Mills

Health


Brimley, Michigan

E2.1

FLOOR PLAN -

SOUTH -

LIGHTING

EDI#19-002

6201061485

JAY S. HRUBY P.E.

NORTH

1/4" = 1'-0"E2.1

2 Section at High Vestibule - Room #1003

1/8" = 1'-0"E2.1

1 Floor Plan - South - Lighting



D

D

DD

OS OS OS OS OS

OSOSOS D D D

DDDDD

DD

DD

OS

OS

OS

OS

OS

OS

OS

OS

OS

D

OS

D

D

DDDD

D

D

D

DD

OS

OS

OSOS

OS

OS

OS

OS

OS OSOS OS

3

OS

OS

DD

D

OSOS

OS

OS

OS

OS

OS D

D

DD D

OS

OS

OS

OS

OS

OS

DD

D

D

D

D

D

D

D

D

OS

OS

OS

OS

OS

OS OS

OS

OS

OS

OSD

D

OS

OS

OS

OS OS

DD

OS OS

OS

OS

OS

OS

OS

D

D

D

D

OSOS

OS

OS

OSOS OS

OS

OS

OS

OS

OS

OS

OS

OS

D

D

DD

D

OSOS OS

OS

OS OS

OS

OS

OS OS

OS

OS

OS

OS

OS

OS

OS

OS

OS

OS

D

D

OS

D

DOS

D

OS

OS

OS

OS

D

OS

DD

GENERAL NOTES

PLAN NOTES

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/3B

H3/3B

H3/3B

H3/3BE

H3/3B

H3/3B

H3/3B

H3/3B

H3/3B

H3/3B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/1B

H3/3BE

H3/3B

H3/3BE

H3/3B

H3/3B

H3/3B

H3/3B

H3/3B

H3/3B

H3/3B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/7B

H3/9B

H3/9B

H3/9K

H3/9K

H3/9K

H3/9K

H3/9K

H3/9K

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/23B

H3/15B

H3/15B

H3/17B

H3/17B

H3/17BE

H3/17B

H3/17B

H3/19B

H3/19B

H3/5B

H3/5B

H3/5B

H3/5B

H3/5BE

H3/5B

H3/5B

H3/5B

H3/5B

H3/5B

H3/5BE

H3/5B

H3/5B

H3/5BE

H3/5B

H3/9B

H3/9B

H3/9B

H3/9B

H3/9BE

H3/9B

H3/9B

H3/9B

H3/9B

H3/9B

H3/9B

H3/9B

H3/9B

H3/9B

H3/9H

H3/17C4

H3/15C4

H3/15C4E

H3/19BE

H3/19B

H3/19B

H3/19B

H3/19B

H3/19B

H3/19B

H3/19BE

H3/17B

H3/17B

H3/17B

H3/17B

H3/17BE

H3/5W2

H3/5W2

H3/5W2

H3/9W2

H3/17W2

H3/17W2

H3/3B

H3/3BE

H3/21H

H3/21HE

H3/21E1

H3/21E2

H3/11E1

H3/19D2

H3/19D2

H3/19B

H3/19B

H3/19BE

H3/5HE

H3/5B

H3/5BE

H3/5B

H3/5G

H3/5G

H3/5AE

H3/5A

H3/5AE

H3/21HE

H3/21H

H3/21H

H3/21HE

H3/21H

H3/21H

H3/21HE

H3/21H

H3/21H

H3/21HE

H3/21H

H3/13H

H3/13HE

H3/13HE

H3/13H

H3/13H

H3/13HE

H3/13H

H3/13H

H3/13HE

H3/13H

H3/13HE

H3/13HE

H3/13H

H3/13H

H3/13HE

H3/21E1

H3/5HE

H3/5H

H3/5H

H3/11E1

H3/21HE

H3/21H

3

2

2

2

2

2

2 2

a

a

a

a

a

a

a

a

a

a

a

a

a

a

a

a

2

2 DENTALWAIT

1200

DENTALCONSULT

1201DENTALRECEPTION

1204

3

3

DENTALRECORDS

1203

PAN1205

DENTALHALLWAY

1207

STERILIZATION1208

2

bbb

1

3

TOILET1209

c c

cc

d

e

e

d

de

fg

f

f

g

g

h

h

i

i

j

k

k

j

jk

hi

MECH.1223

DENTALOFFICE

1217 3

DENTALOFFICE

1218

3

1

TOILET1220

LAB OFFICE243

3

DENTALEXAM1211

3DENTALEXAM1212

3DENTALEXAM1213

3DENTALEXAM1214

3

DENTALEXAM1215

3

DENTALEXAM1216

LAB1210

3

MECH ROOM1221

LOCKERS1222

1

2

k

j

i

h

g

f

e

d

HIM OFFICE(ANDREW)

1178 3

BILLINGOFFICE

(ASHLEY)

1177 3

ADMINOFFICE(DAN)

1176 3

ADMINOFFICE(TARA)

1175 3

ADMINOFFICE

(AUDREY)

1174 3

ADMINOFFICE

(YVONNE)

1173 3

ADMINOFFICE(ABBY)

1172 3

MEETING1144 3

MEETING1143 3

BILLING1171 3

BILLINGHALLWAY

1170

2

22

2

2

2

2

TOILET1145

1

ab

b

bbb

b b

a a a a

aaa

ab

ab

ab

a

REFERENCE1161

VISITATION1162

H.I.M1160 3

1

1

c c c c

c

c

c

cc

H2/13H

a

HALLWAY1140

HALLWAY1142

H2/13HE

a

H2/13H

a

H2/13HE

a

bH3/11H

bH3/11HE

bH3/11H

b

H2/15HE

hH3/11

H

d H3/11HE

d H3/11H

d H3/11H

d H3/11HE

d

a

b

222

2

2

b

b

b H3/11H

H3/11HE

b

H3/11H

b

H3/11HE

b

H3/11H

b

H3/11HE

b

h

d

2

2 2

d

a

2

OFFICE11263

OFFICE11253

OFFICE11243

OFFICE11233

OFFICE11223

OFFICE11213

OFFICE11203

OFFICE11193

OFFICE11183

OFFICE11163

OFFICE11153

OFFICE11123

Storage1111

IT1136

1

1

b2

b

b

GROUPTHERAPY

11133

PLAYTHERAPY

11143

H3/3G

H3/3G

1

1

STORAGE1114A

JAN.1107

B.H.HALLWAY

1110

B.H.HALLWAY

1117

PROCEDUREHALWAY

1100


1102

TOILET1103


1104

PROCEDUREHALLWAY

1105

PROVIDEROFFICE

1094D

CONSULT1101

HALLWAY1034B

MEN'STOILET

1010

HALLWAY1007B

WAITING

1007

Hall1006 HALLWAY

1005

PRC(ASHLEY)

1014

PRC(MIKALA)

1015

PATIENTREG/

CONSULT

1016

HALLWAY1034C

TOILET1137

SPECIMENTOILET1131B

SPECIMENTOILET

1131A

1

1

1

2

2

STAFF WORK1132 DRAW

11333

2

2

LAB1134

CONTACTS1152 3

WORKROOM1151

3

LAB OFFICE1135

3

3

OPTICALSALES

1153

H3/5HE

H3/5H

H3/5H

H3/5H

H3/5HE

H3/5H

H3/5H

H3/5D1

H3/5D1

H3/5D1

H3/5D1

H3/5D1

b b b

b

b

ab

a a a

a

a

aa

b

a

ab

a

a

a

a

OPTICALHALLWAY

1150

OPTICALEXAM

11543

OPTICALEXAM

11553

2

2

2H3/13

H

H3/13H

H3/13H

H3/13H

H3/13H

H3/13H

LAB HALL1131

WAITING1130

DENTALHALLWAY

1219


1106

DENTALHALLWAY

1202

HALLWAY1141

L4

L6

L5

H3

L11

H2/27DD

4

H2/27CC

4

4

4

H2/27EE

H2/27EE

H2/27DD

4

H3/17D1

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8 9

11

11

12

12

17

17 20

21

21

22

22

23

23

25

25

26

26

A A

B B

E E

F F

I

N

O

2410

S

Q

P

M

L

K

H

G

3

3

H3/1L12

H3/1L12 H3/1

D2

H3/1D2

H2/13D1

a

H2/13D1 a

H3/17B

H3/17B

A. PROVIDE AN ADDITIONAL ELECTRICAL CONNECTION TO ALL EMERGENCY LIGHT FIXTURES. ELECTRICAL CONNECTION TO BE FEED FROM UNSWITCHED LEG OF THE CIRCUIT FEEDING THE LIGHT FIXTURES IN THE ROOM/AREA THEY ARE LOCATED IN.

B. PROVIDE PROPER NUMBER OF CONDUCTORS AND CONTROL WIRES TO ACHIEVE CIRCUITING AND LIGHTING CONTROL AS SHOWN.

C. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR WIRING ALL ELECTRICAL ITEMS SHOWN ON THIS DRAWING.

D. ALL RECESSED LIGHTING FIXTURES IN LAY-IN CEILINGS SHALL BE INSTALLED WITH 6' LONG FLEXIBLE METAL CONDUIT.

E. ALL MOUNTING HEIGHTS FOR LIGHTING FIXTURES ARE TO THE BOTTOM OF THE FIXTURES UNLESS INDICATED OTHERWISE.

F. SEE ARCHITECTURAL EXTERIOR ELEVATIONS FOR MOUNTING HEIGHTS OF EXTERIOR LIGHTING FIXTURES.

G. CONDUIT AND WIRE SHALL NOT BE INSTALLED WITHIN THE COMPOSITE FLOOR SYSTEM.

H. CIRCUIT NUMBERS AT DEVICES CORRESPOND TO PANELBOARD BREAKERS (SEE PANELBOARD SCHEDULE). BRANCH CIRCUITS SHALL BE SIZED ACCORDING TO THE CIRCUIT BREAKER RATING, UNLESS INDICATED OTHERWISE ON THE ELECTRICAL EQUIPMENT SCHEDULE.

I. USE #10 AWG CONDUCTORS FOR 20 AMPERE, 120 VOLT BRANCH CIRCUITS LONGER THAN 75 FEET, UNLESS SPECIFICALLY INDICATED OTHERWISE. THIS SHALL BE REQUIRED FOR THE ENTIRE LENGTH OF THE CIRCUIT.

J. USE #10 AWG CONDUCTORS FOR 20 AMPERE, 277 VOLT BRANCH CIRCUITS LONGER THAN 175 FEET, UNLESS SPECIFICALLY INDICATED OTHERWISE. THIS SHALL BE REQUIRED FOR THE ENTIRE LENGTH OF THE CIRCUIT.

1. PROVIDE WALL MOUNTED DUAL TECHNOLOGY OCCUPANCY SENSOR FOR MANUAL ON/AUTOMATIC OFF CONTROL OF LIGHTING IN THIS ROOM. SEE SPECIFICATION SECTION 26 0923 FOR ADDITIONAL INFORMATION.

2. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR/S WITH REMOTE POWER PACK/S FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. SEE SPECIFICATION SECTION 26 0923 FOR ADDITIONAL INFORMATION.

3. PROVIDE CEILING MOUNTED VACANCY SENSOR/S AND WALL MOUNTED ON/OFF/RAISE/LOWER STATION FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. PROVIDE AUXILIARY RELAY FOR BAS MONITORING. SEE SPECIFICATION 26 0924 FOR ADDITIONAL INFORMATION.

4. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR, CEILING MOUNTED DAYLIGHT AND LOW VOLTAGE SWITCH/ES. PROVIDE 0-10 VOLT DIMMING CONTROLS SWITCH UNLESS NOTED OTHERWISE. (SIMILAR TO WATTSTOPPER DLM SERIES DAYLIGHT AND MOTION SENSOR) FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM.

5. PROVIDE CEILING MOUNTED VACANCY SENSOR/S AND WALL MOUNTED ON/OFF SWITCH FOR CONTROL OF LIGHTING AS SHOWN IN THIS ROOM. PROVIDE AUXILIARY RELAY FOR BAS MONITORING. SEE SPECIFICATION 26 0924 FOR ADDITIONAL INFORMATION.

6. PROVIDE CEILING MOUNTED OCCUPANCY SENSOR/S CONNECTED TO LIGHTING CONTROL RELAY PANEL FOR CONTROL OF LIGHTING AS SHOWN IN THIS SPACE.

7. SEE DETAIL 2/E2.1 FOR LIGHT FIXTURE TYPES AND MOUNTING LOCATIONS IN THIS SPACE.

1

1




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

ëáÖå~íìêÉW





(612) 343-5965


(507) 625-7869

018131.00

07/06/2020

GTN

JSH

07/06/2020

Bay Mills

Health


Brimley, Michigan

E2.2

FLOOR PLAN -

NORTH -

LIGHTING

EDI#19-002

6201061485

JAY S. HRUBY P.E.

NORTH

1/8" = 1'-0"E2.2

1 Floor Plan - North - Lighting



GENERAL NOTES

PLAN NOTES

48"

GFI

48"

GFI

AC

GFI

AC

GFI

GFI

GFI AC

GFI48"GFI

(2)

(2)

(2)

(2)

(2)

(2)

(2)

GFI

GFI

GFI

(2)

(2)

(2)

(2) (2)

AC

ACGFI

AC

GFI

AC

GFI

AC

GFI

GFI

GFI

GFI

GFI

GFI

GFI

ACGFI

AC

GFI

AC

GFI

48"GFI

48"GFI

ACGFI

ACGFI

ACGFI

GFIWP

GFIWP

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

AC

GFI

AC

GFI

(2)

(2)

(2) (2

)

(2)

(2)

(2)(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

AC

GFI

AC

GFIAC

GFI

AC

GFI

(4)

(4)

(4)

(4)

(2)

(2)

(2)

ACGFI

(2) (2

)

(2)

(2)

(2)

AC

AC

AC

AC

(2)

(2)

(2)A

CA

C

(2)

EWCGFI

96"

(2)

(2)96"

(4)

(4)

(4)

(4)

(4)

(4)

(4)

(4)

GFI

ACGFI

AC

GFI

(2)

(2)

AC

GFI

(2)

AC

SCR

SCR

SCR

S ES

S ES

SES

SES

SES

SCR

SCR

SCR

S ES

S

ES S

CR

S

SS

S

48"J

48"J

72"

72"

(2)72"

(2)72

"

S

ES S

CR

ACGFI

ACGFI

(2)

(2)

(2)

GFI

F

F

F

F

F

F

F

F

F

FF

F

F F

F

F

F

F

FF

F

F

FP

F

P

F

P

F P

F

P

F

F

F F

F F

FF

F F

F

F

F

F

F

F

F

F

F

F F

F

F

F

F

FF

F

F

F

FF

F F

F

F

F

F F

F

F

F

F

F

F

F

FF

F

FF

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

EW

CG

FI

AC

GFI

AC AC

EW

CG

FI

(2)

(2)

(2)

(2)

GFI

60"

GFI

GFI

(2)

(2)

(2)

(2)

F

GFIWP

(2)

(2)

EPO

EPO

EPO

F

S

ES

S

CR

S

CR

S

CR

S

ESS

ES

S ES

S

ES

SCR

S CR

S

CR

S

CR

S

CR

S

CR

S

CR

SCR

S ES

S

ES

S

ES

S

ES

S

ES

S

ES

SES

S

ES

S

ES

SCR

S

CR

S CR

SCR

SES

F

F

F

F

S

SCR

SES

W

J

AC

GFI

GFI

(2)

N3

N3

N1

N1

P

S S

S S S

N3

N3

N3

N3

N3

N3

SSS

S S S

SSS

N3

N3

N3

N3

N3

N3

N1

P

P

N1

N3

S

S N3

A. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR WIRING ALL ELECTRICAL ITEMS SHOWN ON THE DRAWINGS, EXCEPT ITEMS LISTED ON SHEET E0.01 GENERAL ELECTRICAL NOTES.

B. SEE FIRE ALARM ZONE SCHEDULE FOR INITIATING ZONES AND SIGNAL CIRCUITS.

C. MAXIMUM NUMBER OF 4 INFORMATION OUTLET LOCATIONS PER CONDUIT HOME RUN TO MDF OR IDF IS PERMITTED. CONDUIT SHALL BE SIZED AS FOLLOWS:

a. 1 INFORMATION OUTLET LOCATION: 1"b. 2 INFORMATION OUTLET LOCATIONS: 1 1/4"c. 3 INFORMATION OUTLET LOCATIONS: 1 "

D. 1/2"INSTALL CONDUIT WITH NO MORE THAN (2) 90° BENDS BETWEEN PULL BOXES, AND NO MORE THAN 100'-0" BETWEEN PULL BOXES. PULL BOXES SHALL BE INSTALLED FOR STRAIGHT THRU PULLS ONLY.

E. ALL COMMUNICATIONS CABLES SHALL BE INSTALLED IN CONDUIT, CABLE TRAY, OR SUPPORTED BY CABLE HOOKS. PROVIDE BUSHINGS AT THE ENDS OF ALL CONDUIT WHERE STUBBED ABOVE ACCESSIBLE CEILINGS OR WHERE DROPPED INTO CABLE TRAY. PROVIDE CABLE HOOKS ABOVE ACCESSIBLE CEILINGS FOR CABLE INSTALLATION WHERE NOT INSTALLED IN CONDUIT OR CABLE TRAY.

1. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE ONE (1) CATEGORY 6 CABLE FROM THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.

2. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE TWO (2) CATEGORY 6 CABLES FROM THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.

3. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE FOUR (4) CATEGORY 6 CABLES FROM THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.

4. FURNISH AND INSTALL ONE CATEGORY 6 CABLE FROM THIS LOCATION (PROVIDE 15 FOOT SERVICE COIL OF CABLE ABOVE THE CEILING) TO DATA ROOM #1026, FOR WIRELESS ACCESS POINT FURNISHED AND INSTALLED BY OTHERS. MAKE ALL TERMINATIONS.

5. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE ONE (1) CATEGORY 6 CABLE AND ONE (1) RG6 COAXIAL FROM THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.

6. PROVIDE ROUGH-IN FOR DOOR SECURITY. SEE DETAIL 5/E7.2 AND DOOR HARDWARE SCHEDULE FOR ADDITIONAL INFORMATION.

7. CCTV CAMERA. PROVIDE ONE CAT 6 CABLE WITH 15'-0" SERVICE LOOP AT THIS LOCATION ROUTED TO AND TERMINATED AT A DEDICATED POE CCTV PATCH PANEL IN IT ROOM #1026.

8. FURNISH AND INSTALL TWO (2) CATEGORY 6 CABLES FROM RECESSED FLOOR BOX AT THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.

9. FURNISH AND INSTALL FOUR (4) CATEGORY 6 CABLES FROM RECESSED FLOOR BOX AT THIS LOCATION TO DATA ROOM #1026. MAKE ALL TERMINATIONS.

10. PROVIDE DISCREET DOOR LOCK DOWN BUTTON AND ALL CONTROL WIRING FOR REMOTE LOCKDOWN FOR POWERED DOOR OPERATOR PD0-1000B.

11. REFER TO DRAWING E5.4 FOR ADDITIONAL ELECTRICAL ROUGH-IN AND INSTALLATION INFORMATION.

12. REFER TO DRAWING E5.5 FOR ADDITIONAL ELECTRICAL ROUGH-IN AND INSTALLATION INFORMATION.

E5.2

1Sim

COMMUNITYHEALTH(CONNIE)

1054

COMMUNITYHEALTH

(SHELBY)1053

COMMUNITYHEALTH

(JOANNT)1052

AMBULANCEHOLD (negpressure)

1051

COMMUNITYHEALTH

(THERESA)

1059

COMMUNITYHEALTH

(GINA HE)

1058

COMMUNITYHEALTH

(STEPHANIE)

1057

EXAM1084

EXAM1079

EXAM1083

EXAM1078

EXAM (NEGPRESSURE)

1082

EXAM1077

EXAM1074

EXAM1073

EXAM1072

COMMUNITYHEALTH

(BRENDA)

1060

FLEX OFFICE1075

NURSESUPERVISOR

(BETTY)

1065

COMMUNITYHEALTH

1064


1102

MEETINGROOM

1002

PROVIDEROFFICE

1094D

PROVIDEROFFICE1094A

DATA1026

OFFICE1028

OFFICE1027

PHARMACYTOILET

1023B

PHARMACYCONSULT

1021

PHARMACYCOSULT

1022

OUTREACH(CHELSEY)

1019

PRC(ASHLEY)

1014PATIENT

REG/CONSULT

1016

PRC(MIKALA)

1015

SWITCHBOARD1017

INSURANCE(SHELLEY)

1018

VESTIBULE1001

C.H. WorkRoom

1056

CONSULT1071

TOILET1103


1104

TRIAGE (NEGPRESSURE)

1081

TOILET1035

CONSULT1101

TOILET1033B

TOILET1033A

HOUSEKEEPING1030

RADIOLOGY1039

CHANGE1039A

MOTHERSROOM

1009

TOILET1040

WOMENSTOILET

1008

WAIT1036

STAFF WORK1037A

STAFFMOTHERS

ROOM

1031

HALL1037

MAMMO1038

MECH1042

COMMUNITYHEALTH

(TRANSPORT)

1055

EXAM1086

EXAM1087

EXAM1088

CLEAN

1091

SCALE1085

SCALE1076

MEN'STOILET

1010

NURSE1094

PROVIDEROFFICE1094C

PROVIDEROFFICE1094B

PROCEDUREHALWAY

1100

C.H.HALLWAY

1050

EXAMHALLWAY

1070

C.H.HALLWAY

1061

PROCEDUREHALLWAY

1105

STAFFBREAKROOM

1029

HALLWAY1034A

HALLWAY1034B

EXAMHALLWAY

1080

CENTRALREGISTRATION

1013

WORK1012

RE-APPOINT/PAYMENT

1011

HALLWAY1004

WAITING1007

HALLWAY1007A

STORAGE1002A

VEST.1038A


1106

DENTALWAIT1200

HALLWAY1005


HALLWAY1024

Hall1006

COMMUNITYHEALTH

1062

COMMUNITYHEALTH

1063

STAFFTOILET

1070A

STAFFHALLWAY

1090

MED1093

SOILED1092

PHARMACYOFFICE1023A

PHARMACYWORK1023

PHARMACYRETAIL1020A

E5.2

2Sim

INTERCOM MASTERSTATION.

INTERCOM ENTRYSTATION.

INTERCOM ENTRYSTATION

2

2

2

2

22

22

2 2

22

2

2

2

2

2

2

222

2

2

2

2

2

2

2

2

2

2 2

2

2

2

2

2

2

2222

22 2 2

2

222

2222

2

222

5

5

2

STORAGE1041

Bio Hazard1043

OPTICALSALES1153

HALLWAY1007B

PHARMACYWAITING

1020B

HALLWAY1025

FACP

2

6

6

6

6

6

6 6

6

6

6

66

6

6 6

6

66

6

6

FSD-1

FSD-2

FSD-3

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

11

11

12

12

17

17

21

21

22

22

23

23

25

25

26

26

N

O

32

32

28

28

27

27

31

31

T

V

29

29

30

30

W

Y

AA

DD

EE

HH

II

JJ

KK

LL

MM MM

NN NN

24

24

161510

10

GG

FF

BB

S

Q

P

FSD-7

9 9

99

2

2

7

7

7

7

7

7

7

7 7

7

7

7

6

PDO-1000B PDO-1000A

10

10

7

7

7

7

2

21

11

12

L7

L10

T-L1

L1H1H2RCP-H2

L2

L3

1 1

1

1 1 1

1 1 1

NURSE CALLMASTERPANEL

1

1 1 1

1 1 1

1

1

1

1

NC

M




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

ëáÖå~íìêÉW





(612) 343-5965


(507) 625-7869

018131.00

07/06/2020

GTN

JSH

07/06/2020

Bay Mills

Health


Brimley, Michigan

E4.1

FLOOR PLAN -

SOUTH -

SYSTEMS

EDI#19-002

6201061485

JAY S. HRUBY P.E.

NORTH

1/8" = 1'-0"E4.1

1 Floor Plan - South - Systems



GENERAL NOTES

PLAN NOTES

GFI

GFI

GFI

GFI

GFI

GFI

GFIWP

GFIWP

(2) AC

GFI

AC

GFIAC

GFI

AC

GFI

(4)

(4)

(4)

(4)

(2)

(2)

EWCGFI

(2)

(2)

(2)

(2)

(2)

(2)

(2)

(2)

AC

GFI

AC

GFI

(2)

(2)

(2)

(2)

GFI

(2)

(2)

(2)

(2)

(2) (2

)

(2)

(2) (2

)

(2) (2) (2) (2)

AC

GFI

AC

(2)

AC

(2)(2)

(2)

(2)

(2)

GFI

AC

GFI

ACGFI

AC

GFI

AC

GFI

AC

GFI

ACGFI

48"GFI

48"GFI

ACGFI

ACGFI

ACGFI

AC

GFI

AC

GFI

GFI

GFI

GFI

GFI

(2)

(2)

AC

GFI

AC

GFI

(2)

AC

GFI

(2)

(2)

AC

GFI

AC

GFI

TR

TR

TR

TR

(2)

AC

GFI

AC

GFI

ACGFI

AC

GFI

AC

GFI

AC

GFI

AC

GFI

AC

GFI

GFI

AC

GFI

GFI

AC

GFI

48"

48"

(2)

AC

(2)

AC

(4)

(4)

AC

SCR

S CR

48"72"

(2)72"

L5-20R

L5-30R

AC

GFI

(2)

AC ACAC AC

F

F

F

F

FF

F

F

F

F

F

F

FFF

F

F

P

F

P

F

P

F F

F F

F

F

F

F

F

F

F

F

F F

F

F

F

F

F FF

F

F

F

F

F

F

F

F

FF

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

FF

F

F

F

F

F

F

F

F

FF

F

F

F

F

J

54"

S ES

76"

(2)

(2)

72"

(2)

GFI

GFI(2)

(2)

F

GFIWP

S

CR

S

ES

S

CR

S

ES

S ES

SCR

S

CR

S

CR

S

ES

S

ES

S

ES

S

CR

S

CR

S

ES

P P

(4)

(4)

F

F

F

S

ES

SCR

SCR S

CR

S CR

SES

S

ES

SES

SES

S

CR

76"

76"

(2)72"

(2)72"

(2)AC

(2)AC

44"GFI

J44"GFI

44"GFI

44"GFI

44"GFI

J44

"G

FI44

"G

FI

JJ

44"GFI

44"GFI

GFI

44"GFI

N3

N3

N1

N1

P

S S

A. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR WIRING ALL ELECTRICAL ITEMS SHOWN ON THE DRAWINGS, EXCEPT ITEMS LISTED ON SHEET E0.01 GENERAL ELECTRICAL NOTES.

B. SEE FIRE ALARM ZONE SCHEDULE FOR INITIATING ZONES AND SIGNAL CIRCUITS.

C. MAXIMUM NUMBER OF 4 INFORMATION OUTLET LOCATIONS PER CONDUIT HOME RUN TO MDF OR IDF IS PERMITTED. CONDUIT SHALL BE SIZED AS FOLLOWS:

a. 1 INFORMATION OUTLET LOCATION: 1"b. 2 INFORMATION OUTLET LOCATIONS: 1 1/4"c. 3 INFORMATION OUTLET LOCATIONS: 1 "

D. 1/2"INSTALL CONDUIT WITH NO MORE THAN (2) 90° BENDS BETWEEN PULL BOXES, AND NO MORE THAN 100'-0" BETWEEN PULL BOXES. PULL BOXES SHALL BE INSTALLED FOR STRAIGHT THRU PULLS ONLY.

E. ALL COMMUNICATIONS CABLES SHALL BE INSTALLED IN CONDUIT, CABLE TRAY, OR SUPPORTED BY CABLE HOOKS. PROVIDE BUSHINGS AT THE ENDS OF ALL CONDUIT WHERE STUBBED ABOVE ACCESSIBLE CEILINGS OR WHERE DROPPED INTO CABLE TRAY. PROVIDE CABLE HOOKS ABOVE ACCESSIBLE CEILINGS FOR CABLE INSTALLATION WHERE NOT INSTALLED IN CONDUIT OR CABLE TRAY.

1. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE ONE (1) CATEGORY 6 CABLE FROM THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.

2. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE TWO (2) CATEGORY 6 CABLES FROM THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.

3. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE FOUR (4) CATEGORY 6 CABLES FROM THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.

4. FURNISH AND INSTALL ONE CATEGORY 6 CABLE FROM THIS LOCATION (PROVIDE 15 FOOT SERVICE COIL OF CABLE ABOVE THE CEILING) TO DATA ROOM #1136, FOR WIRELESS ACCESS POINT FURNISHED AND INSTALLED BY OTHERS. MAKE ALL TERMINATIONS.

5. FURNISH AND INSTALL A 4" SQUARE x 2-1/8" DEEP JUNCTION BOX WITH SINGLE-GANG MUD-RING. ROUTE 1" CONDUIT FROM BOX, STUBBED TO ABOVE THE NEAREST ACCESSIBLE CEILING. ROUTE ONE (1) CATEGORY 6 CABLE AND ONE (1) RG6 COAXIAL FROM THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.

6. PROVIDE ROUGH-IN FOR DOOR SECURITY. SEE DETAIL 5/E7.2 AND DOOR HARDWARE SCHEDULE FOR ADDITIONAL INFORMATION.

7. CCTV CAMERA. PROVIDE ONE CAT 6 CABLE WITH 15'-0" SERVICE LOOP AT THIS LOCATION ROUTED TO AND TERMINATED AT A DEDICATED POE CCTV PATCH PANEL IN IT ROOM #1136.

8. FURNISH AND INSTALL TWO (2) CATEGORY 6 CABLES FROM RECESSED FLOOR BOX AT THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.

9. FURNISH AND INSTALL FOUR (4) CATEGORY 6 CABLES FROM RECESSED FLOOR BOX AT THIS LOCATION TO DATA ROOM #1136. MAKE ALL TERMINATIONS.

Storage1111

OFFICE1122

OFFICE1123

OFFICE1124

OFFICE1125


1102

OFFICE1118

OFFICE1119

OFFICE1120

BILLINGOFFICE

(ASHLEY)

1177

ADMINOFFICE(DAN)

1176

ADMINOFFICE(TARA)

1175

DENTALOFFICE

1218

OFFICE1126

PROVIDEROFFICE

1094D

PRC(ASHLEY)

1014

CONTACTS1152

TOILET1137

SPECIMENTOILET1131B

LAB1134

LAB HALL1131

SPECIMENTOILET1131A

LAB OFFICE1135

WORKROOM1151

OPTICALEXAM1155

OPTICALEXAM

1154

VISITATION1162

REFERENCE1161

TOILET1145

H.I.M1160

MEETING1143

MECH ROOM1221

HIM OFFICE(ANDREW)

1178

LOCKERS1222

PAN1205

PATIENTREG/

CONSULT

1016

PRC(MIKALA)

1015

DENTALCONSULT

1201

TOILET1220

LAB OFFICE243

LAB1210

TOILET1103


1104CONSULT

1101

OFFICE1116

PLAYTHERAPY

1114

GROUPTHERAPY

1113

OFFICE1115

OFFICE1112

WAITING1130

DRAW1133

STAFF WORK1132

MEN'STOILET

1010

B.H.HALLWAY

1117

B.H.HALLWAY

1110

PROCEDUREHALWAY

1100PROCEDURE

HALLWAY

1105

HALLWAY1142

HALLWAY1140

BILLING1171

DENTALHALLWAY

1207

DENTALRECORDS

1203

DENTALRECEPTION

1204

DENTALHALLWAY

1219

STORAGE1114A

JAN.1107

BILLINGHALLWAY

1170


1106

OFFICE1121

ADMINOFFICE(ABBY)

1172

MEETING1144

ADMINOFFICE

(YVONNE)

1173

ADMINOFFICE

(AUDREY)

1174

DENTALEXAM1215

DENTALOFFICE

1217

DENTALHALLWAY

1202

DENTALEXAM1211

DENTALEXAM

1212

DENTALEXAM

1213

DENTALEXAM

1214

DENTALWAIT

1200

DENTALEXAM

1216

MECH.1223

HALLWAY1005

Hall1006

IT1136

2

2 2 2 2 2

222

2

2

29

2

2

2

2

2

2

2

2

22 2 2 2

2 2 2 22

222

2

2

2

2

2

2

2

OPTICALSALES1153

HALLWAY1007B

HALLWAY1141

HALLWAY1034C

OPTICALHALLWAY

1150

2

2

6

6

6

6

6

6

FSD-4

FSD-5 FSD-6

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8 9

11

11

12

12

17

17 20

21

21

22

22

23

23

25

25

26

26

A A

B B

E E

F F

I

N

O

24

24

10

S

Q

P

M

L

K

H

G

22

9E5.3

2Sim

7

7

7

7

7

666

6

2

2

2 2

L4

L6

L5

L12

L11

H3

11




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

ëáÖå~íìêÉW





(612) 343-5965


(507) 625-7869

018131.00

07/06/2020

GTN

JSH

07/06/2020

Bay Mills

Health


Brimley, Michigan

E4.2

FLOOR PLAN -

NORTH -

SYSTEMS

EDI#19-002

6201061485

JAY S. HRUBY P.E.

NORTH

1/8" = 1'-0"E4.2

1 Floor Plan - North - Systems



RJ45

(Typical)

RJ45 Port(Typical)

RJ45

(Typical)

RJ45

(Typical)

3RU-FIBER

3RU-FIBER

3RU-FIBER

3RU-FIBER

3RU-FIBER

IT ROOM #1136MAIN SERVERROOM #1026.

12-STRAND, ARMORED, OM4CLASSIFICATION, MULTI-MODEPLENUM RATED, PLUS 12-STRAND,ARMORED SINGLE MODE OPTICALFIBER CABLE

MAIN TELECOMMUNICATIONSGROUND BUS, REFER TO 3/E7.2FOR ADDITIONAL INFORMATION.

TELECOMMUNICATIONS GROUNDBUS, REFER TO 3/E7.2 FORADDITIONAL INFORMATION.

TELECOMMUNICATIONS GROUNDCONDUCTOR, REFER TO 1/E7.2FOR ADDITIONAL INFORMATION.

50-PAIR, COPPER VOICEBACKBONE CABLE,PLENUM RATED.

P

L

N

120VAC

VIO

GR

Y

LMLS-400Photosensor

*DLM OccupancySensor

*NOTE:Corner mount Sensorshown with pigtail &supplied coupler. Ceilingmount Sensor has twoRJ45 ports.

LMRJ-C8Coupler

LMDM-101Dimming Switch

0-10VDC DimmingBallast required.

Class 1 0-10 VoltControl Wiring

LMRJ Series Pre-TerminatedCables or CAT5e. Free Topology& Splitter Acceptable

120/230/277

Red

Hot Blk

Neutral Wht

LightingLoad

LMRC-211Dimming Room

Controller

Vio

Gry

Red

Neutral Wht

LightingLoad

(a)

LightingLoad

(b)

Yel

UnswitchedHot Blk120/277



LMRC-212Dual Relay

On/Off/0-10V Dimming

Room Controller

LMRJ-C8Coupler

EarthGround

Grn

Red

Neutral Wht

LightingLoad

(a)

LightingLoad

(b)

Yel

LightingLoad

(c)

Blu

UnswitchedHot Blk120/277



LMRC-213Triple Relay

On/Off/0-10V Dimming

Room Controller

LMRJ-C8Coupler

EarthGround

Grn

LMLS-400Photosensor

LMLS-400Photosensor

Vio

Gry

Vio

Gry

Vio

Gry

Vio

Gry

Vio

Gry

VIO

GR

Y

VIO

GR

Y

VIO

GR

Y

VIO

GR

Y

VIO

GR

Y













Control Output

Common

+24VDC

Neutral

Hot

Wht

Blk

Re

d

Blk

Power Pack

Blu

SensorCeiling/Wall24VDCAny

Red

Red

Lighting Load

BZ-200

**Ground

*ToAdditionalSensor(s)

Off

Switch

Local

Optional

and Sensor(s)One BZ-200 Power Pack

Red

Red

Common

+24VDC

Control Output

Hot

Neutral

Blk

Wht

MANUAL ON

BZ-250(A)

Bro

wn

Bla

ck

Gre

y

Ora

ng

e

Re

d

Blu

e

Cap

Cap COM

SW1

LVSW-101Low VoltageSwitch Input

**Ground

Lighting Load

(A)

BZ-250 Power Pack Bi-LevelControl with MANUAL ON

SensorCeiling/Wall24VDCAny

*ToAdditionalSensor(s)

METAL CLADE CABLE CONCEALED ANDFASTENED TO TOP OF STRUCTURAL BEAM.

SELECT GRADE DIMENSIONAL DOUGLASFIR BLOCKING. FINISHED TO MATCHSTRUCTURAL BEAM.

REMODELER STYLEOCTOGON BOX.

LAMINATED DOUGLAS FIRSTRUCTURAL TRUSS

FIXTYURE TYPE 'S'. TYPICAL.

RUSSELLSTOLL RECEPTACLE#DF2504FRAB WITH SPRING COVER

600-VOLT, 3-PHASE, 200/3 NEMA 3RDISCONNECT FUSED AT 150 AMP.

GROUND ROD

#1/0 AWG COPPER MINIMUM

STEEL COLUMN MOUNTED IN CONCRETEFOOTING.

3'-0

"

HAND HOLE

C C

wsv wsv

NOTE:WATER SOLENOID VALVES SHALLCLOSE WHEN POWER IS APPLIED.

120 VOLT COIL20 AMP CONTACTSRIB RELAY

SWITCH W/PILOT LIGHT

10Fixture Type 'S' Mounting DetailSCALE: NO SCALE

9Mobile MRI Connection DetailSCALE: NO SCALE

2Two-Relay - Room Level Lighting ControlSCALE: NO SCALE 1

One-Relay - Room Level Lighting ControlSCALE: NO SCALE3

Three-Relay - Room Level Lighting ControlSCALE: NO SCALE

6Typical Single-Level Lighting Control DetailSCALE: NO SCALE

7Typical Single-Level Lighting Control DetailSCALE: NO SCALE

11Water Solenoid Valve Control DiagramSCALE: NO SCALE12

Communications Riser DiagramNOT TO SCALE

1

1

1




Çê~ïå=ÄóW



êÉÖK=@W

ëáÖå=Ç~íÉW

Ç~íÉW

éêçàÉÅí=@W

ëáÖå~íìêÉW





(612) 343-5965


(507) 625-7869

018131.00

07/06/2020

GTN

JSH

07/06/2020

Bay Mills

Health


Brimley, Michigan

E7.3

DETAILS -

ELECTRICAL

EDI#19-002

6201061485

JAY S. HRUBY P.E.



1