adc 5000 series battery charger/power supply - wind … supply adc5000.… · adc 5000 series...
TRANSCRIPT
ADC 5000 Series Battery charger/Power supply
• 12, 24, 48 VDC output voltage • 60, 125 and 250W output power • DIN rail or base plate mounting • Switch mode technology • Temperature compensated charging voltage • Alarm relay
ADC 5000 is a series of compact and stable power supplies suitable for all types of industrial application. Suitable for battery chargers with very low ripple, built-in series diode and temperature regulated output voltage. LED indication for supply output voltage. Stable, mechanical construction, high efficiency, and convection cooling ensure long service life. Available with 12, 24, and 48 VDC output voltage. Manufacturer POWERNET.
ADC type1) VoltageNominal
VoltageBattery Charger
VoltagePower Supply
Current Dimensions
[VDC] [VDC] [VDC] [A]* WxHxD [mm] 56xy (60W) 50xy (125W) 53xy (250W)
121212
13.713.713.7
10.5…159…159…15
51020
50x120x80 66x148x113 75x172x122
57xy (60W) 51xy (125W) 54xy (250W)
242424
27.427.427.4
21…2921…2921…29
2.55
10
50x120x80 66x148x113 75x172x122
58xy (60W) 52xy(125W) 55xy (250W)
484848
54.854.854.8
45…5845…5845…58
1.252.5
5
50x120x80 66x148x113 75x172x122
Technical Specifications *Max. current limit is approx. 10% higher than nominal W052 W521 W06 :rewoP
Voltage: 12VDC 24VDC 48VDC 12VDC 24VDC 48VDC 12VDC 24VDC 48VDCInput (AC): 90…264VAC/45…65Hz 94…132VAC or 184…264VAC (reverser)/45…65Hz
Ripple [mVDC rms]: Regulation, 0…90%: Hold-up time [ms]:
<15<1.5% >50
<10<0.5% >50
<10<0.5% >50
<15<1.0% >20
<10<0.5% >20
<10<0.5% >20
<15<1.0% >20
<10<0.5% >20
<10<0.5% >20
”KO“ tuptuo CD = DEL neerG :noitacidnIAlarm relay: Power fail/low output voltage: Potential free change-over switch, 24VDC/0.3A or
30VAC/0.5A gnitared tuohtiw rewop lluf ta C°55+…04- :egnar erutarepmeT
)desolcne rotcennoc( ²mm5.2 xam ,spmalc/srotcennoC :noitcennoCLabelling: EN 60950 class 1, EN 55022 class B, ETS 300 019-2-4 class 4 M5
02PI ,muinimula/leets detarofreP :erusolcnE
X selection code 2 = Power supply/DIN rail 8 = Battery charger/DIN (incl. temp. sensor) 3 = Power supply/Wall 9 = Battery charger/Wall (incl. temp. sensor)
Y selection code 1 = Alarm relay (standard) 3 = Alarm relay + series diode
Tel: +358 20 753 3200Fax: +358 20 753 3205Email: [email protected]:// www.vamp.fi
We reserve the rights to product alterations without prior notice.Copyright © Vamp Ltd. All trademarks are the property of their respective holders.
Vamp LtdP.O.Box 810FI-65101 VAASAFinland
Visiting address:Vaasa Airport ParkYrittäjänkatu 15Vaasa, Finland
ISO 9001:2000certified company
TE R Deutschland GmbHGrützmühlenweg 4022339 HamburgFon 040/53 80 92-50Fax 040/53 80 92-85E-mail: [email protected]: //ww w.ter-deutschland.de