ad-s8t | ad-s10t | ad-s12 acousticdesign™ series ... - ntc surround loudspeake… · the ap-5122...
TRANSCRIPT
Cinema surround loudspeakers
AD-S8T | AD-S10T | AD-S12
AcousticDesign™ Series S8T S10T S12
Features• Models available with 8", 10",
and 12" woofers for a range of output requirements
• DMT™ (Directivity Matched Transition) ensures smooth, consistent power response throughout the listening area
• Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without sagging over time
• Optional yoke mount and M10 Kit-C eye bolt kit offers additional loudspeaker deployment options
• Screw-down Euro-block connectors allows pre-wiring of the system
• Lightweight ABS enclosures offer long-term durability and lasting good looks
• Available in black or white
• Complete EASE, CAD & BIM information available on line
QSC’s AcousticDesign™ surface mount loudspeakers are professional, two-way, full-range systems for cinema surround applications. Ease-of-installation is the driving principle behind QSC’s next generation of small format, surface mount loudspeakers.
For immersive sound surround formats requiring special aiming practices, AD-S loudspeakers offer extreme flexibility for optimizing surround sound coverage for any cinema surround format. They can easily be mounted to any weight bearing, flat surface allowing the loudspeaker to be deployed in horizontal or vertical orientation. Pan and tilt aiming for front and rear mounted surrounds is a simple adjustment using the included X-Mount™ hardware, which enables the installer to simply lift the loudspeaker onto the mount and lock it into place. The loudspeaker can then be adjusted for pan and tilt and locked in place in 7.5 degree increments. Knurled surfaces on the mount’s pivot points ensure that the loudspeaker aiming angle stays fixed and will not slip over time. No special tools are required to install or adjust the loudspeaker angle. AD-S8T, AD-S10T and AD-S12 models feature M10 mounting points for suspension via eye-bolts as well as mounting points for a yoke bracket for downward-firing ceiling mount applications. A seismic mount is provided on the rear of the enclosure. Screw-down, Euro-block connectors allow pre-wiring of the system.
The uniform power-response of this loudspeaker is a result of DMT™ (Directivity Matched Transition), a design approach that matches LF and HF coverage in the crossover region. Another key to the extraordinary accuracy and flat power response of the AcousticDesign loudspeakers is the axisymmetric waveguide which provides uncompromised performance in both the vertical and horizontal axes. The 36mm (1.4 in) diaphragm, 25mm (1 in) exit compression driver on the AD-S8T, AD-S10T and AD-S12 delivers crisp, detailed high-frequency reproduction and when combined with the matched woofers, provides full bandwidth reproduction. The AD-S8T uses an 8" woofer, while the AD-S10T has a 10" woofer, and the AD-S12 has a 12" woofer.Housed in rugged ABS enclosures for long-term durability, the AcousticDesign series present a clean, unobtrusive look, and AD-S grilles are unadorned eliminating the need to cover obtrusive logo treatments. AD-S loudspeakers are available in either black (RAL 9011) or white (RAL 9010) and may be painted to match any décor.
To minimize impact and disposal fees at the job site, all AD-S loudspeakers are packaged in environmentally friendly, recyclable cartons.
S8T S12S10T
AD-S8T | AD-S10T | AD-S12 Details
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
AD-S8T | AD-S10T | AD-S12 Spec Sheet 03/27/2013
please recycle
© 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. DMT is a trademark of QSC.
Specifications subject to change without notice.
System Hardware S8T S10T S12
Frequency Range (-10dB)1 55 Hz to 20 kHz 50 Hz to 19 kHz 52 Hz to 20kHz
Rated Noise Power (Voltage)2 200 W continuous (40 V rms) 250 W continuous (45 V rms) 300 W continuous (50 V rms)
Sensitivity3 90 dB, 1W@1m 92 dB, 1W@1m 95 dB, 1W@1m
Rated Coverage Angle (-6 dB) 105˚ Axisymmetric 90˚ Axisymmetric 75˚ Axisymmetric
Maximum Rated SPL4 113 dB @1m, continuous 119 dB @ 1m, peak
116 dB @1m, continuous 122 dB @ 1m, peak
120 dB @1m, continuous 126 dB @ 1m, peak
Rated Impedance 8Ω 8Ω 8Ω
Recommended Amplifier Power 400 Watts 500 Watts 600 Watts
Transformer Taps 70 V: 60, 30, 15, 7.5 watts and 8 ohm bypass100V: 60, 30, 15 watts and 8 ohm bypass
70 V: 100, 50, 25, 12.5 watts and 8 ohm bypass100V: 100, 50, 25 and 8 ohm bypass
N / A
HF Transducer 1" exit, 1.4" voice coil compression driver 1" exit, 1.4" voice coil compression driver 1" exit, 1.4" voice coil compression driver
LF Transducer 8" weather resistant paper cone woofer, 2.5" (63 mm) voice coil
10" weather resistant paper cone woofer, 3" (76 mm) voice coil
12" weather resistant paper cone woofer, 2.5" (63 mm) voice coil
Enclosure Details
Input Connector Euroblock connector with
parallel output terminals
Euroblock connector with
parallel output terminals
Euroblock connector with
parallel output terminals
Enclosure Material Painted ABS polymer Painted ABS polymer Painted ABS polymer
Grille Powder coated aluminum Powder coated aluminum Powder coated aluminum
Environmental
Dimensions (HxWxD) 17.3" x 10" x 9.8" (440 x 254 x 251 mm) 20.3" x 12.5" x 11.7" (516 x 318 x 298 mm) 23.4" x 13.9" x 12.7" (594 x 354 x 322 mm)
Net Weight 24.1 lbs (11 kg) 31 lbs (14 kg) 35 lbs (16kg)
Shipping Weight 14.5 kg / 32.1 lbs 18.45 kg / 40.6 lbs
Included Accessories X-Mount mounting system,
Euroblock connector
X-Mount mounting system,
Euroblock connector
X-Mount mounting system,
Euroblock connector
Optional Accessories Yoke bracket kit | M10 Kit-C eyebolts Yoke bracket kit | M10 Kit-C eyebolts Yoke bracket kit | M10 Kit-C eyebolts
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, -10 dB from on-axis sensitivity2 IEC60268-1 noise signal for 2 Hrs3 On-Axis, free-field sensitivity, 2.83V, 1 m4 Calculated from rated noise voltage and sensitivity
254 mm (10 in)
251
mm
(9.
9 in
)
254 mm (10 in)
440
mm
(17
.3 in
)
254 mm (10 in)
440
mm
(17
.3 in
)
318 mm (12.5 in)
298
mm
(11
.7 in
)
318 mm (12.5 in)
516
mm
(20
.3 in
)
298 mm (11.7 in)
516
mm
(20
.3 in
)
596
mm
(23
.4 in
)
354 mm (13.9 in)
354 mm (13.9 in)
323
mm
(12
.7 in
)
323 mm (12.7 in)
596
mm
(23
.4 in
)
High Power Cinema Surround Loudspeaker
AP-5102
AP-5102
Features• Very high output loudspeaker for
immersive sound surround formats
• DMT™ (Directivity Matched Transition) ensures smooth, coherent power response throughout the listening area
• Axisymmetric horn
• 10" (254mm) woofer with 3.0" (76mm) voice coil
• 3.0" (76mm) voice coil compression driver
• M10 threaded inserts and yoke mount fittings offer flexible and safe deployment options for a variety of applications
• NL4 Speakon™ connector and covered barrier strip terminals
• Bi-Amp / Passive switchable
• 15-ply Baltic birch plywood construction
The new immersive sound surround formats place greater performance demands on surround loudspeakers in terms of frequency response, output capability, and mounting flexibility. QSC’s AcousticPerformance™ series loudspeakers meet these challenges with headroom to spare.
The AP-5102 Acoustic Performance Cinema Surround Loudspeaker features a high power-capacity, 3" (76mm) diaphragm compression driver and a 10" (254mm) woofer to deliver exceptional full bandwidth reproduction.
The uniform power-response of this loudspeaker is a result of DMT™ (Directivity Matched Transition), a design approach that matches LF and HF coverage in the crossover region. Another key to the extraordinary accuracy and flat power response of the AP-5102 is the axisymmetric waveguide which provides uncompromised performance in both the vertical and horizontal axes. The AP-5102 provides coverage over an extremely wide 105° angle, ideal for applications where you need to cover a large seating area in a room with low ceiling height.
The AP-5102 may be used as a passive (full-range) loudspeaker to minimize amplifier channel count or it may be bi-amplified for greater control and performance. To further enhance performance, bi-amp and full-range tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC products.
The AP-5102 enclosure features M10 mounting points for suspension via eye-bolts as well as mount points for an optional yoke bracket.
AP-5102 Details
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
AP-5102 Spec Sheet 03/27/2013
please recycle
© 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. DMT is a trademark of QSC. Speakon is a registered trademark of Neutrik
Specifications subject to change without notice.
System Hardware AP-5102
Frequency Range (-10dB)1 60 Hz to 18 kHz
Rated Noise Power (Voltage)2 450 W continuous (60 V rms)
Sensitivity3 94 dB, 1W@1m
Rated Coverage Angle (-6 dB) 105˚ Axisymmetric
Maximum Rated SPL4 121 dB @ 1m, continuous127 dB @ 1m, peak
Rated Impedance 8Ω
Recommended Amplifier Power 720 Watts
HF Transducer 3" (76 mm) voice coil compression driver
LF Transducer 10" (254 mm) driver with 3" (76 mm) voice coil
Enclosure Details
Input Connector 4-position barrier strip, accepts up to #10 AWG stranded wire, NL4 connector
Enclosure Material 15-ply Baltic birch plywood
Grille 16 Gauge powder coated steel
Environmental
Dimensions (HxWxD) 22" x 12" x 10.5" (559 mm x 305 mm x 267 mm)
Net Weight 48 lb (21.7 kg)
Shipping Weight 53 lb (24 kg)
Included Accessories M10 threaded inserts
Optional Accessories AP-YM10 Yoke mount, M10 Kit-W
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, -10 dB from on-axis sensitivity2 IEC60268-1 noise signal for 2 Hrs3 On-Axis, free-field sensitivity, 2.83V, 1 m4 Calculated from rated noise voltage and sensitivity
267 mm(10.5 in)
305 mm(12.0 in)
305 mm(12.0 in)
270 mm(10.6 in)
559 mm(22.0 in)
152 mm(6.0 in)
267 mm(10.5 in)
305 mm(12.0 in)
305 mm(12.0 in)
270 mm(10.6 in)
559 mm(22.0 in)
152 mm(6.0 in)
High Power Cinema Surround Loudspeaker
AP-5122
AP-5122
Features• Very high output loudspeaker for
immersive sound surround formats
• DMT™ (Directivity Matched Transition) ensures smooth, coherent power response throughout the listening area
• Axisymmetric horn
• 12" (305mm) woofer with 4.0" (102mm) voice coil
• 3.0" (76mm) voice coil compression driver
• M10 threaded inserts and yoke mount fittings offer flexible and safe deployment options for a variety of applications
• NL4 Speakon™ connector and covered barrier strip terminals
• Bi-Amp / Passive switchable
• 15-ply Baltic birch plywood construction
The new immersive sound surround formats place greater performance demands on surround loudspeakers in terms of frequency response, output capability, and mounting flexibility. QSC’s AcousticPerformance™ series loudspeakers meet these challenges with headroom to spare.
The AP-5122 AcousticPerformance Cinema Surround Loudspeaker features a high power-capacity, 3" (76mm) diaphragm compression driver and a 12" (305mm) woofer to deliver exceptional full bandwidth reproduction.
The uniform power-response of this loudspeaker is a result of DMT™ (Directivity Matched Transition), a design approach that matches LF and HF coverage in the crossover region. Another key to the extraordinary accuracy and flat power response of the AP-5122 is the axisymmetric waveguide which provides uncompromised performance in both the vertical and horizontal axes. The AP-5122 provides coverage over a 90° angle, ideal for applications where you need to cover a large seating area in a room with low ceiling height.
The AP-5122 may be used as a passive (full-range) loudspeaker to minimize amplifier channel count or it may be bi-amplified for greater control and performance. To further enhance performance, bi-amp and full-range tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC products.
The AP-5122 enclosure features M10 mounting points for suspension via eye-bolts as well as mount points for an optional yoke bracket.
AP-5122 Details
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
AP-5122 Spec Sheet 03/27/2013
please recycle
© 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. DMT is a trademark of QSC. Speakon is a registered trademark of Neutrik
Specifications subject to change without notice.
System Hardware AP-5122
Frequency Range (-10dB)1 48 Hz to 18 kHz
Rated Noise Power (Voltage)2 550 W continuous (66.3 V rms)
Sensitivity3 95 dB, 1W@1m
Rated Coverage Angle (-6 dB) 90˚ Axisymmetric
Maximum Rated SPL4 122 dB @ 1m, continuous128 dB @ 1m, peak
Rated Impedance 8Ω
Recommended Amplifier Power 880 Watts
HF Transducer 3" (76 mm) voice coil compression driver
LF Transducer 12" (305 mm) driver
Enclosure Details
Input Connector 4-position barrier strip, accepts up to #10 AWG stranded wire, NL4 connector
Enclosure Material 15-ply Baltic birch plywood
Grille 16 Gauge powder coated steel
Environmental
Dimensions (HxWxD) 26" x 15" x 13" (660 mm x 381 mm x 330 mm)
Net Weight 65 lb (29.5 kg)
Shipping Weight 73 lb (32.6 kg)
Included Accessories M10 threaded inserts
Optional Accessories AP-YM12 Yoke mount, M10 Kit-W
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, -10 dB from on-axis sensitivity2 IEC60268-1 noise signal for 2 Hrs3 On-Axis, free-field sensitivity, 2.83V, 1 m4 Calculated from rated noise voltage and sensitivity
330 mm(13.0 in)
381 mm(15.0 in)
180 mm(7.1 in)
315 mm(12.4 in)
660 mm(26.0 in)
191 mm(7.5 in)
330 mm(13.0 in)
381 mm(15.0 in)
180 mm(7.1 in)
315 mm(12.4 in)
660 mm(26.0 in)
191 mm(7.5 in)
Cinema Surround Loudspeaker
SR-1020
SR-1020
Features• High Performance for medium to
large cinemas
• Directivity Matched Transition™ provides balanced sound between woofer and horn
• Axisymmetric horn
• 10" (254mm) woofer with 2" (50mm) voice coil
• 1.4" (35mm) titanium diaphragm compression driver
• Pre-installed mounting hardware for fast, easy and secure installation
• High-power handling capability meets the demands of D-Cinema soundtrack reproduction
Developed specifically for the unique requirements of professional motion picture playback in medium to large cinemas, QSC extends its commitment to the cinema market with the SR-1020 Cinema Surround Loudspeaker. As a member of QSC’s DCS (Digital Cinema Speaker) Series, the SR-1020 offers high-power handling, excellent sensitivity, and extended bass response in a very compact enclosure.
The SR-1020 Cinema Surround Loudspeaker features a high-power, long-throw 10" low-frequency transducer coupled with a 1.4" titanium diaphragm compression driver. The system’s MDF enclosure features a 15° down angle baffle and easily accessible terminals on the top of the enclosure. The 300 watt continuous power rating and sophisticated crossover with protection circuitry provides absolute reliability.
The uniform power-response of this loudspeaker is a result of DMT™ (Directivity Matched Transition), a design approach that matches LF and HF coverage in the crossover region. Another key to the extraordinary accuracy and flat power response of the SR-1020 is the axisymmetric waveguide which provides uncompromised performance in both the vertical and horizontal axes.
The compact black enclosure with black grille blends into any theatre decor. Pre-installed speaker-side hardware allows fast single-installer mounting, and brackets support down-angles of either 15° (standard) or 23° (optional). A traditional U-bracket (YM-400) is also available. The SR-1020 is shipped in pairs to reduce shipping costs.
SR-1020 Details
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
SR-1020 Spec Sheet 03/27/2013
please recycle
© 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. DMT is a trademark of QSC.
Specifications subject to change without notice.
System Hardware SR-1020
Frequency Range (-10dB)1 50 Hz to 20 kHz
Rated Noise Power (Voltage)2 300 W continuous (50 V rms)
Sensitivity3 94 dB, 1W@1m
Rated Coverage Angle (-6 dB) 90˚ Axisymmetric
Maximum Rated SPL4 119 dB @ 1m, continuous125 dB @ 1m, peak
Rated Impedance 8Ω
Recommended Amplifier Power 600 Watts
HF Transducer 1.4" (35 mm) titanium diaphragm compression driver
LF Transducer 10" (254 mm) long throw low-frequency transducer with 2" (50 mm) voice coil
Enclosure Details
Input Connector 4-position barrier strip, accepts up to #10 AWG stranded wire
Enclosure Material MDF
Grille Black Cloth
Environmental
Dimensions (HxWxD) 19.5" x 15.8" x 10.2" (495 mm x 401 mm x 259 mm)
Net Weight 27.3 lb (12.3 kg)
Shipping Weight (pairs) 73.3 lb (33.2 kg)
Included Accessories Pre-installed brackets
Optional Accessories QM-SW, QM-BW, YM-400
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, -10 dB from on-axis sensitivity2 IEC60268-1 noise signal for 2 Hrs3 On-Axis, free-field sensitivity, 2.83V, 1 m4 Calculated from rated noise voltage and sensitivity
7.3"184 mm
15.8"401 mm
19.5"495 mm
10.2" 259 mm
5.1"129 mm
1.3" 33 mm
7.3"184 mm
15.8"401 mm
19.5"495 mm
10.2" 259 mm
5.1"129 mm
1.3" 33 mm
7.3"184 mm
15.8"401 mm
19.5"495 mm
10.2" 259 mm
5.1"129 mm
1.3" 33 mm
Cinema Surround Loudspeaker
SR-1030
SR-1030
Features• High Performance for large cinemas
• Directivity Matched Transition™ provides balanced sound between woofer and horn
• Axisymmetric horn
• 10" (254mm) woofer with 2.5" (63mm) voice coil
• 1.75" (44mm) titanium diaphragm compression driver
• Pre-installed mounting hardware for fast, easy and secure installation
• Very high-power handling capability meets the demands of D-Cinema soundtrack reproduction
Developed specifically for the unique requirements of professional motion picture playback in smaller cinemas, QSC extends its commitment to the cinema market with the SR-1030 Cinema Surround Loudspeaker. As a member of QSC’s DCS (Digital Cinema Speaker) Series, the SR-1030 offers high-power handling, excellent sensitivity, and extended bass response in a very compact enclosure.
The SR-1030 Cinema Surround Loudspeaker features a high-power, long-throw 10" low-frequency transducer coupled with a large 1.75" titanium diaphragm compression driver. The system’s MDF enclosure features a 15° down angle baffle and easily accessible terminals on the top of the enclosure. The 400 watt continuous power rating and sophisticated crossover with protection circuitry provides absolute reliability.
The uniform power-response of this loudspeaker is a result of DMT™ (Directivity Matched Transition), a design approach that matches LF and HF coverage in the crossover region. Another key to the extraordinary accuracy and flat power response of the SR-1030 is the axisymmetric waveguide which provides uncompromised performance in both the vertical and horizontal axes.
The compact black enclosure with black grille blends into any theatre decor. Pre-installed speaker-side hardware allows fast single-installer mounting, and brackets support down-angles of either 15° (standard) or 23° (optional). A traditional U-bracket (YM-400) is also available. The SR-1030 is shipped in pairs to reduce shipping costs.
SR-1030 Details
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
SR-1030 Spec Sheet 03/27/2013
please recycle
© 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. DMT is a trademark of QSC.
Specifications subject to change without notice.
System Hardware SR-1030
Frequency Range (-10dB)1 56 Hz to 20 kHz
Rated Noise Power (Voltage)2 400 W continuous (56.5 V rms)
Sensitivity3 95.5 dB, 1W@1m
Rated Coverage Angle (-6 dB) 90˚ Axisymmetric
Maximum Rated SPL4 121.5 dB @ 1m, continuous127.5 dB @ 1m, peak
Rated Impedance 8Ω
Recommended Amplifier Power 800 Watts
HF Transducer 1.75" (44 mm) titanium diaphragm compression driver
LF Transducer 10" (254 mm) long throw low-frequency transducer with 2.5" (63 mm) voice coil
Enclosure Details
Input Connector 4-position barrier strip, accepts up to #10 AWG stranded wire
Enclosure Material MDF
Grille Black Cloth
Environmental
Dimensions (HxWxD) 19.5" x 15.8" x 10.2" (495 mm x 401 mm x 259 mm)
Net Weight 36.5 lb (16.5 kg)
Shipping Weight (pairs) 82.6 lb (37.4 kg)
Included Accessories Pre-installed brackets
Optional Accessories QM-SW, QM-BW, YM-400
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, -10 dB from on-axis sensitivity2 IEC60268-1 noise signal for 2 Hrs3 On-Axis, free-field sensitivity, 2.83V, 1 m4 Calculated from rated noise voltage and sensitivity
7.3"184 mm
15.8"401 mm
3.8" 95 mm
10.2"259 mm
19.5" 495 mm
1.3" 33 mm
7.3"184 mm
15.8"401 mm
3.8" 95 mm
10.2"259 mm
19.5" 495 mm
1.3" 33 mm
7.3"184 mm
15.8"401 mm
3.8" 95 mm
10.2"259 mm
19.5" 495 mm
1.3" 33 mm
Cinema Surround Loudspeaker
SR-8101
SR-8101
Features• Affordable Performance for smaller
cinemas
• 8" (200mm) woofer with 1.5" (38mm) voice coil
• 1" (25mm) dome tweeter for exceptionally smooth and wide HF response
• Pre-installed mounting hardware for fast, easy and secure installation
• High-power handling capability meets the demands of D-Cinema soundtrack reproduction
Developed specifically for the unique requirements of professional motion picture playback in smaller cinemas, QSC extends its commitment to the cinema market with the SR-8101 Cinema Surround Loudspeaker. As a member of QSC’s DCS (Digital Cinema Speaker) Series, the SR-8101 offers high-power handling, excellent sensitivity, and extended bass response in a very compact enclosure.
The SR-8101 Cinema Surround Loudspeaker features a high-power, long-throw 8" low-frequency transducer coupled with a 1" soft dome tweeter. The system’s MDF enclosure features a 15° down angle baffle and easily accessible terminals on the top of the enclosure. The 125 watt continuous power rating and sophisticated crossover with protection circuitry provides absolute reliability.
The compact black enclosure with black grille blends into any theatre decor. Pre-installed speaker-side hardware allows fast single-installer mounting, and brackets support down-angles of either 15° (standard) or 23° (optional). A traditional U-bracket (YM-300) is also available. The SR-8101 is shipped in pairs to reduce shipping costs.
SR-8101 Details
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
SR-8101 Spec Sheet 03/27/2013
please recycle
© 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries.
Specifications subject to change without notice.
System Hardware SR-8101
Frequency Range (-10dB)1 54 Hz to 20 kHz
Rated Noise Power (Voltage)2 125 W continuous (32 V rms)
Sensitivity3 91 dB, 1W@1m
Rated Coverage Angle (-6 dB) 130˚ horizontal x 110˚ vertical (averaged from 1 kHz to 8 kHz, -6 dB)
Maximum Rated SPL4 112 dB @ 1m, continuous118 dB @ 1m, peak
Rated Impedance 8Ω
Recommended Amplifier Power 200 Watts
HF Transducer 1" (25.4 mm) soft dome tweeter
LF Transducer 8" (200 mm) long throw low-frequency transducer
Enclosure Details
Input Connector 4-position barrier strip, accepts up to #10 AWG stranded wire
Enclosure Material MDF
Grille Black Cloth
Environmental
Dimensions (HxWxD) 19.5" x 12" x 9.6" (495 mm x 305 mm x 244 mm)
Net Weight 18.6 lb (8.4 kg)
Shipping Weight (pairs) 43 lb (19 kg)
Included Accessories Pre-installed brackets
Optional Accessories QM-SW, YM-300
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, -10 dB from on-axis sensitivity2 IEC60268-1 noise signal for 2 Hrs3 On-Axis, free-field sensitivity, 2.83V, 1 m4 Calculated from rated noise voltage and sensitivity
1.3" 33mm
7.2"183 mm
12"305 mm
4.5"115 mm
9.7"247 mm
19.4"494 mm
1.3" 33mm
7.2"183 mm
12"305 mm
4.5"115 mm
9.7"247 mm
19.4"494 mm
1.3" 33mm
7.2"183 mm
12"305 mm
4.5"115 mm
9.7"247 mm
19.4"494 mm
Cinema Surround Loudspeaker
SR-8200
SR-8200
Features• High Performance in a small
package
• Directivity Matched Transition™ provides balanced sound between woofer and horn
• 8" (200mm) woofer with 2" (50mm) voice coil
• 1.4" (35mm) titanium diaphragm compression driver
• Pre-installed mounting hardware for fast, easy and secure installation
• High-power handling capability meets the demands of D-Cinema soundtrack reproduction
Developed specifically for the unique requirements of professional motion picture playback in smaller cinemas, QSC extends its commitment to the cinema market with the SR-8200 Cinema Surround Loudspeaker. As a member of QSC’s DCS (Digital Cinema Speaker) Series, the SR-8200 offers high-power handling, excellent sensitivity, and extended bass response in a very compact enclosure.
The SR-8200 Cinema Surround Loudspeaker features a high-power, long-throw 8" low-frequency transducer coupled with a 1.4" titanium diaphragm compression driver. The system’s MDF enclosure features a 15° down angle baffle and easily accessible terminals on the top of the enclosure. The 200 watt continuous power rating and sophisticated crossover with protection circuitry provides absolute reliability.
The uniform power-response of this loudspeaker is a result of DMT™ (Directivity Matched Transition), a design approach that matches LF and HF coverage in the crossover region. Another key to the extraordinary accuracy and flat power response of the SR-8200 is the axisymmetric waveguide which provides uncompromised performance in both the vertical and horizontal axes.
The compact black enclosure with black grille blends into any theatre decor. Pre-installed speaker-side hardware allows fast single-installer mounting, and brackets support down-angles of either 15° (standard) or 23° (optional). A traditional U-bracket (YM-46) is also available. The SR-8200 is shipped in pairs to reduce shipping costs.
SR-8200 Details
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
SR-8200 Spec Sheet 03/27/2013
please recycle
© 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. DMT is a trademark of QSC.
Specifications subject to change without notice.
System Hardware SR-8200
Frequency Range (-10dB)1 52 Hz to 20 kHz
Rated Noise Power (Voltage)2 200 W continuous (40 V rms)
Sensitivity3 94 dB, 1W@1m
Rated Coverage Angle (-6 dB) 90˚ Axisymmetric
Maximum Rated SPL4 117 dB @ 1m, continuous123 dB @ 1m, peak
Rated Impedance 8Ω
Recommended Amplifier Power 400 Watts
HF Transducer 1.4" (35 mm) titanium diaphragm compression driver
LF Transducer 8" (200 mm) long throw low-frequency transducer with 2" (50mm) voice coil
Enclosure Details
Input Connector 4-position barrier strip, accepts up to #10 AWG stranded wire
Enclosure Material MDF
Grille Black Cloth
Environmental
Dimensions (HxWxD) 19.5" x 14.3" x 9.6" (495 mm x 363 mm x 244 mm)
Net Weight 24.6 lb (11.1 kg)
Shipping Weight (pairs) 57.7 lb (26.1 kg)
Included Accessories Pre-installed brackets
Optional Accessories QM-SW, QM-BW, YM-46
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, -10 dB from on-axis sensitivity2 IEC60268-1 noise signal for 2 Hrs3 On-Axis, free-field sensitivity, 2.83V, 1 m4 Calculated from rated noise voltage and sensitivity
1.3" 33mm
7.8"197 mm
14.3"363 mm
4.5"115 mm
9.6"244 mm
19.5"495 mm
1.3" 33mm
7.8"197 mm
14.3"363 mm
4.5"115 mm
9.6"244 mm
19.5"495 mm
1.3" 33mm
7.8"197 mm
14.3"363 mm
4.5"115 mm
9.6"244 mm
19.5"495 mm