aculink 710 brochure v1.01

8/10/2019 AcuLink 710 Brochure V1.01

1/4

ISO9001 Certied

Access energy information from local or remote sites View real time performance data Track energy use and peak demand LEED/ Energy start certication

AcuLink 710 Data Acquisition Server


2/4

DESCRIPTION

Accuenergys AcuLink 710 is an intelligent, flexible data acquisitionserver and gateway allowing users to collect energy data from allAccuenergy meters, sensors and other devices. Designed to connectwith IP-based applications such as enterprise energy management,demand response and smart grid programs, the AcuLink gatewaylets you connect thousands of energy metering points, benchmarkenergy usage and reduce energy cost.

Embedded Solution

The compact size and indus trial temperature range (-30 to 70C)makes this a perfect solution for embedded applications. AcuLink710 effectively reduces development and integration time bycollecting and distributing power and energy information directlyfrom meters to destinations.

Data Collection and Distribution

The AcuLink collects and logs time-s tamped data from connecteddownstream devices (serial or Ethernet), and stores locally innon-volatile memory until the next scheduled upload or manualdownload. Using an Ethernet (LAN) connection you can push or pulldata via HTTP, XML and FTP standard protocols or to USB ash drivelocally.

Installation & Features

No software is required. All information can be easily accessedvia web browser. There are several additional features includingalarming, SNMP traps, network configuration, wireless diagnostics,USB, security provisions and backlit LCD. Integrated meter driverlibrary is designed to speed up installation and low integration costsby making the entire connecting process plug-and play.

Compatibility

The AcuLink is compatib le with Accuenergys web-based energymanagement system solution, AcuEMS, and virtually any other front-end software platform allowing customer to use a variety of reportingtools, whether it is a local server or an enterprise wide reporting suite.

Connect between backend meters and servers, and present information in front end.

Access energy information from local or remote sites.

View real time performance data.

Push or pull meter data to energy dashboards, kiosks and software applications.

Monitor renewable energy performance and production.

Monitor performance of critical systems such as lighting, HVAC, PDUs, inverters, etc.

Track energy use and peak demand.

Alarm notication for data points above or below target levels including SNMP Traps.

Measurement and verication (M&V).

LEED/ Energy start certication.

FEATURES, BENEFITS AND APPLICATIONS

Industrial Plant

Mall

Hospital

Data center

Subway, railway system

School/Campus

Smart Building

TYPICAL SOLUTIONS


3/4

ARCHITECTURE DIAGRAMS

Internet Internet

AcuLink 710

Acuvim II Series

Acuvim-L Series

AcuRev 2000 Series

AcuDC 240 Series

Water Meter

Gas Meter

Tempreturer Sensor

Pressure Sensers

EMS

CloudNetwork

DIMENSIONS Unit : mm (inches)

LEGENDS

RS485 Daisy Chain

Data Tranmission

Pulse Counting(Digital Input)

Analog Signal (4-20mA, 0-5V)


4/4

ORDERING INFORMATION

Accuenergy Corp.

Los Angeles-Toronto-Beijing

North America Toll Free: 1-877-721-8908Web: www.accuenergy.comEmail: [email protected]

Revision Date: Nov., 2013

Document #

HARDWARE SPECIFICATIONSProcessor ARM9 embedded CPUOperating System Linux 2.6Memory 32 MB RAMFlash ROM 16 MB NOR Flash (expandable with USB

memory device)Interval Recording 1 to 60 minutes, user selectable (default 15

minutes)

LEDs Ethernet, Modbus TX/RX, power, alarmConsole 2 x 16 LCD character, two push buttons

POWERPower Supply 24VDC, 500mA

*This unit is to be sourced by a Class 2 p ower supply with the followingoutput: 24VDC, 500mA min not to exceed 8A

IsolationRJ45 Ethernet and RS-485 port are isolated to1500VDC from the main board. (Power andUSB non-isolated)

COMMUNICATIONProtocols Modbus/RTU, Modbus/TCP, TCP/IP, PPP, HTTP/

HTML, FTP, NTP, XML, SNMP-TrapLAN RJ45 10/100 Ethernet, full half duplex, autopolarity

USB USB expansion port

INPUTSSerial Port RS-485 Modbus, suppor ts up to 32 ex ternal

devices (expandable)

PHYSICALWeight 0.42lbs (0.19kg)Size 4" x 4.25" x 2" (102mm x 108mm x 51mm)

ENVIRONMENTNorth America -30 to 70C, 95% RH, non-condensing

CODES AND STANDARDSFCC CFR 47 Part 15, Class A, EN 61000, EN 61326, CE, UL61010Recognized

SPECIFICATIONS

Part Number: AcuLink 710Accessories: Power Supply

aculink 710 brochure v1.01

Documents