activity lines :
DESCRIPTION
Physical-Technical Institute of National Academy of Sciences Belarus, Minsk. Activity lines :. http :// www . phti . belhost . by. Е- mail: [email protected] Tel/fax: (+375-17-263-76-93). Founded - 1931 Personnel - 3 70 Laboratories- 3 0. 1. New materials for machine building. - PowerPoint PPT PresentationTRANSCRIPT
Praha AIP 02 12 2008 1
Physical-Technical Institute of Physical-Technical Institute of National Academy of SciencesNational Academy of Sciences
Belarus, MinskBelarus, Minsk
Founded - 1931Personnel- 370 Laboratories- 30
Activity linesActivity lines::
Е-mail: [email protected]/fax: (+375-17-263-76-93)
2. 2. NewNew technologies for thermal andtechnologies for thermal and deformation deformation processing of materialsprocessing of materials
1. 1. New materials for New materials for machine buildingmachine building
http://www.phti.belhost.by
Praha AIP 02 12 2008 2
Physical-Technical Institute ofPhysical-Technical Institute of National Academy of SciencesNational Academy of Sciences, ,
Belarus, MinskBelarus, Minsk
Praha AIP 02 12 2008 3
««Investigation and optimization Investigation and optimization of iron deformabilityof iron deformability»»
Artur PokrovskyArtur Pokrovsky
Physical-Technical Institute ofPhysical-Technical Institute of National Academy of SciencesNational Academy of Sciences, ,
Belarus, MinskBelarus, Minsk
((Example of unusual action onExample of unusual action on traditionaltraditional materialmaterial))
Praha AIP 02 12 20084
Iron,Iron, classical approach:classical approach:Excellent casting materialHardly deformableMaterial only for non-critical items
New view onNew view on ironiron::1. Deformed iron enters the class of
materials of high quality
2. Has superior properties
3. Its area of applications is wider
Praha AIP 02 12 20085
1. Higher thermal conductivity results in rapid heat sink (cylinder sleeves, guide valve sleeves)
2. Antifriction properties (camshafts, crank shafts, piston rings)
3. Quicker damping of vibrations and sounds (valve pushers)
4. Lighter by 10% (casings, pallets)
Iron benefits as compared to steel
Praha AIP 02 12 20086
Drawbacks of iron:
Low mechanical properties
Casting defects degrading the properties
Praha AIP 02 12 20087
Traditional means of increasing Traditional means of increasing mechanicalmechanical properties of iron:properties of iron: Alloying Modifying Thermal treatment
Quality of a casting,Casting defects:
Problems do not vanish
Praha AIP 02 12 20088
Advantages of deformation Advantages of deformation processingprocessing : :
3. Accuracy of shaping
2.Increase of strengthcharacteristics
1.Guaranteed quality of metal
Praha AIP 02 12 2008 9
Why we turn to deformation of iron Why we turn to deformation of iron ::
Physical-TechnicalPhysical-Technical Institute of NationalInstitute of National Academy Academy of Sciences, Belarusof Sciences, Belarus, , MinskMinsk
• Casting defects such as pores and cavities are avoided
• Mechanical properties are enhanced up to the level of alloyed steel
(strength is 1200 MPa, elongation 15%)
• Antifriction characteristics are increased by a factor of 1.5
Praha AIP 02 12 200810
Control of graphite shapeControl of graphite shape Traditional Traditional approachapproach::
Change of graphite shape from branchy to compact and spherical ones
Praha AIP 02 12 200811
Control of graphite Control of graphite shape on deformingshape on deforming
And vice versa, from sphericalshape to fibers
Praha AIP 02 12 200812
WeWe tested thetested the following classes of irons following classes of irons ::
Gray ironGray iron Mottled ironMottled iron
Malleable ironMalleable iron High-strength ironHigh-strength iron
And have foundAnd have found the most the most ADVANTAGEOUS ONESADVANTAGEOUS ONES
Praha AIP 02 12 200813
Problems:
Irons : 950 – 850ОС (Δ 100ОС)
Steel: 1200 – 800ОС (Δ 400ОС)
Temperature parametersof deforming
Praha AIP 02 12 200814
0
10
20
30
40
50
20 800 850 900 950 1000 1050 1100
Отн
ос
ите
ль
но
е у
дл
ин
ен
ие
, %
Температура испытания, оС
Высокопрочный
Ковкий
Половинчатый
Серый
0
10
20
30
40
50
60
70
0 1 2 3 4 5 6 7 8 9 10 11
На
гру
зка
, ус
л. е
д.
Абсолютное удлинение образца, мм
Высокопрочный
Ковкий
Серый
Половинчатый
Temperature parameters
Praha AIP 02 12 200815
There are There are 5 5 groups of groups of ««knowknow--howhow»» : :
1. Alloying diagrams
2. Preliminary thermal treatment for improvement of deformability
3. Design of press-forging tool
4. Temperature-force parameters of deforming
5. Finishing thermal treatment
Conditions of iron deformingConditions of iron deforming
Praha AIP 02 12 200816
Example of deliberate selectionExample of deliberate selectionof parameters for iron deformingof parameters for iron deforming
Press forging from a solid billet FOR ONE STROKE
Part: body of drill chuck
Praha AIP 02 12 200817
Example ofExample of violating the ironviolating the iron deforming conditionsdeforming conditions
Finishedpart
High-quality semi-finished product
Spoiled product
(press-forgingtemperature is
violated)
Part: Cylinder of jack plunger for MAZ truck
Praha AIP 02 12 200818
SchematicSchematic diagram diagram ofof iron deforming iron deforming
1 – Iron billet heated to high temperature
2 – Body of press tool
3 – Intermediate medium
4 - Punch
5 – Die
6 - Guide bush
Praha AIP 02 12 200819
Making the samples forMaking the samples for investigationsinvestigations
Transverse samples:
Longitudinal samples:Incomingcasting billet
Press-forgedrod
Praha AIP 02 12 200820
Wearing weight loss during dry friction, deformed Wearing weight loss during dry friction, deformed conditioncondition: :
(D(Decrease by a factor of 1.5 as compared that in casting condition)ecrease by a factor of 1.5 as compared that in casting condition)
0
5
10
15
20
25
Wea
rin
g w
eig
ht
loss
aft
er 1
6 th
ou
s. c
ycle
s, k
g/m
3 1
0-5
HSI
GI
MI
MtI
80%-deformation
Casting
In order of decreasing wear resistance:
1. Mottled iron, (MtI)2. High-strength iron,
(HSI)3. Malleable iron, (MI)4. Gray iron, (GI)
Praha AIP 02 12 200821
Significant feature of deformation isSignificant feature of deformation is anisotropy ofanisotropy of structure and propertiesstructure and properties
Longit
udinal
secti
on Cross
secti
on
Praha AIP 02 12 200822
Anisotropy ofAnisotropy of wear duringwear during dry frictiondry friction
6
8
10
12
14
16
18
0 20 40 60 80Degree of deformation, %
We
ari
ng w
eig
ht
loss, k
g/m
3 10-5
Longitud. sample
Transverse samp.
Longitud. sample
Transverse samp.
Ferrite
structure
Pearlite
structure
Longitudinal
sample
Transverse sample
The selection is made of optimum relationships
between:
Deformation parameters
Microstructures
Friction directions
Praha AIP 02 12 200823
DryDry FrictionFriction: : Coefficient ofCoefficient of friction can be decreased friction can be decreased
by a factor of 2.5by a factor of 2.5
Longitudinal
sample
Transverse
sample
0,1
0,2
0,3
0,4
0,5
0 20 40 60 80
Degree of deformation, %
Coe
ffic
ien
t o
f fri
ction
Transverse samples
Longitudinal samples
Praha AIP 02 12 200824
Probable factors that cause improvement of deformed iron
characteristics:
1. Refinement of austenite grain 2. Change in pearlite morphology3. Change in graphite morphology 4. Origination of new graphite inclusions
Praha AIP 02 12 200825
1. 1. Refinement of austenite grainRefinement of austenite grain
Grain number 3-4
Grain number 8-9
Praha AIP 02 12 200826
2. 2. Changes in pearlite morphologyChanges in pearlite morphology
х 15000
х 10000
х 10000
Praha AIP 02 12 200827
3. 3. Changes in graphite morphologyChanges in graphite morphology
Praha AIP 02 12 200828
4. 4. Formation ofFormation ofnewnew graphitegraphite
inclusionsinclusions
Praha AIP 02 12 2008 29
Industrial testing ofIndustrial testing ofdeformed irondeformed iron
PhysicalPhysical--TechnicalTechnical Institute of NationalInstitute of National Academy of Sciences, Belarus,Academy of Sciences, Belarus, MinskMinsk
Various parts have been offered but the greatest interest has been shown in
2 lines(that will be discussed below):
Praha AIP 02 12 2008 30
High-quality billets ofHigh-quality billets of pistonpistonandand sealing ringssealing rings made frommade from deformed irondeformed iron
PhysicalPhysical--TechnicalTechnical Institute of NationalInstitute of National Academy Academy of Sciences, Belarus,of Sciences, Belarus, MinskMinsk
Their mechanical properties
are 2 times higher than those of cast rings
Any failures are absent 7-fold decrease of lubricant
bleeding No wear increase of mating part Stable and one and the same
quality throughout the whole height
Praha AIP 02 12 200831
Appreciation in Belarus and RussiaAppreciation in Belarus and Russia
Praha AIP 02 12 2008 32
High-quality billets ofHigh-quality billets of gears gears made frommade from deformed irondeformed iron
PhysicalPhysical--TechnicalTechnical Institute of NationalInstitute of National Academy Academy of Sciences, Belarus,of Sciences, Belarus, MinskMinsk
Strength is at the level of alloyed steel
Noise in trucks is lower by 3 to 4 db
Weight of gears is lower by 9 % (the economy for one set is 700 g)
Praha AIP 02 12 200833
Disadvantages of technology
High power requirements. A billet is to be heated.
Some time is required for designing, fabricating and adjustment of press-forging tool.
Costly press tool.
Economically sound are:
Both mass production from 50 thousand pc per year (e. g., gears for MAZ) and piece production
(e. g., piston rings «Formula-1»).
Praha AIP 02 12 200834
Present-day investigationproblems:
1. Technological directional thrust is ahead of fundamental knowledge.
2. The factors that cause iron hardening are still not completely cleared up.
3. The role played by structure factorsin hardening is ambiguous.
Praha AIP 02 12 200835
We are in search of potential We are in search of potential partners forpartners for::
Performing joint scientific investigations
Cooperation in delivering billets made from deformed iron.
Praha AIP 02 12 200836
From the scientific viewpoint From the scientific viewpoint wewe are interested inare interested in::
Physical factors and mechanisms responsible for iron hardening during hot deformation
Computer simulation of iron hardening processes; Tribotechnical tests Investigation of iron physical characteristics Construction of mathematical models of structure
formation Investigation of fine structure (dislocations and
point defects).
Praha AIP 02 12 200837
From the practical viewpoint From the practical viewpoint we are interested inwe are interested in::
Widening the area of deformed iron use as an effective competitive alternative to steel roll stock for manufacturing automotive and machine-building parts
Joint realization of our technological developments during production of items from deformed iron with improved characteristics
We are now prepared to produce rods for investigations as well as gear and sealing ring billets of various typical sizes
Praha AIP 02 12 200838
ContactsContacts:: Physical-Technical Institute of National Academy
of Sciences of Belarus
10 Kuprevich St., Minsk, 220141, Belarus
Artur I. Pokrovsky, Cand. Tech. Sci.,
Leading Scientific Worker
Tel.: +10375-29-663-58-38
Е-mail: [email protected]
Praha AIP 02 12 200839
Thank youThank youfor attentionfor attention!!