ac_smart
TRANSCRIPT
![Page 1: ac_smart](https://reader035.vdocuments.us/reader035/viewer/2022081805/55281bef497959710b8b4788/html5/thumbnails/1.jpg)
��1900 West College Avenue, State College, PA 16801 • 814-272-SPMS • [email protected]
Remote/Local Power Management SystemThe AC SMARTstart® is a multifunctional AC power distribution unit designed to control eight AC loads and monitor vital parameters. This product is avail-able in 15 Amp, 16 Amp, 20 Amp, and 30 Amp total load capacity models. In addition, we offer output configurations that use screw clamp terminal blocks, in lieu of IEC or NEMA connectors, for industrial ap-plications.
All models have the ability to power-on or power-off any or all loads in any sequence over a wide range of time intervals. The PDU automatically sequences each output. This significantly reduces the total in-rush current and limits the possibility of equipment damage due to the combined turn-on transient of several loads. The sequence order and delay is user defined at setup.
Power control capability to groups of outletsRemote operation and control capabilities via Telnet or Web interfaceLocal operation and control capabilities by means of front panel push-button switch and backlit LED status indicatorMonitors input line voltage, total load current, line frequency, and remote external temperature (with optional temperature sensorTwo isolated contact inputs can be used with alarm sensors, security sensors, limit switches, and/or remote stop. Emergency Power Off (EPO) configura-tion also possible.May be used as a master PDU with several slaves linked via RS-485/422 or RS-232Includes optional front or center mounting bracketsComplies to FCC, CE, UL, and TÜV requirements
••
•
•
•
•
••
Features
A circuit breaker at the AC input provides overall protec-tion. To prevent the circuit breaker from tripping during power up, the PDU features a power-on current limit. The AC SMARTstart® is also capable of monitoring input line voltage and total load current, as well as line frequency.
Operation/control is accomplished either manually, us-ing controls on the front panel of the unit, or remotely, using a computing device that utilizes EIA RS-232 and RS-485/422 communications such as a laptop computer, desktop computer, or other personal electronic device.
Two user programmable external contacts can be config-ured to alert the user of under-voltage, over-current, or over-temperature conditions using the dry contact clo-sure. These contacts allow remote operation and control from Web browser or Telnet interface.
Spec
ialty
AC
Pow
er S
olut
ions
![Page 2: ac_smart](https://reader035.vdocuments.us/reader035/viewer/2022081805/55281bef497959710b8b4788/html5/thumbnails/2.jpg)
��1900 West College Avenue, State College, PA 16801 • 814-272-SPMS • [email protected]
Web/Telnet/SNMP Option:
Enhanced web-based device set-up and control management
Auto Ping feature to test and optionally power cycle a connected host
Email alerts to up to three designated recipients
Optional sensors can be incorporated and included in alarm email alerts with user defined messages
SNMP MIB for standards-based monitoring and con-trol of the power distribution unit and its associated operating features
•
•
•
•
•
Outlet Control with Group Management Capability
Initial Set Up Screen
Main Screen
Alert Threshold Screen
Spec
ialty
AC
Pow
er S
olut
ions
![Page 3: ac_smart](https://reader035.vdocuments.us/reader035/viewer/2022081805/55281bef497959710b8b4788/html5/thumbnails/3.jpg)
��1900 West College Avenue, State College, PA 16801 • 814-272-SPMS • [email protected]
Input and OutputGlobal NEMA
16 Amps 32 Amps (30 in part number nomenclature)
20 Amps 30 Amps
Nominal InputVoltage
95 - 137 VAC or
200 - 208 VAC
95 - 137 VAC or
200 - 208 VAC
200 - 230 VAC 200 - 230 VAC
Input Frequency 47 -63 Hz 47 -63 Hz 47 -63 Hz 47 -63 HzInput Current 16A max. per breaker 32A max. split between (2)
16A circuits20A max. per breaker 30A max. split between (2)
15A circuitsPower Entry Connector
IEC C20 Inlet IEC 60309, 30A, on 10’ Cord IEC C20 Inlet or
NEMA 5-20P on 10’ cord
IEC C20 Inlet or NEMA (L5-30P or L6-30P)
on 10’ cordOutlet Connectors
8 x IEC C13 8 x IEC C13 8 x NEMA 5-20R 8 x NEMA 5-15R
Output Power 1.92 or 3.26 KVA(Basic Power)
3.84 or 6.38 KVA(Basic Power)
4.30 KVA(Basic Power)
6.45 KVA(Intermediate Power)
Input Protection 95 - 137 VAC - 16A 1 Pole Circuit Breaker per input
200 - 208 VAC - 16A 2 Pole Circuit Breaker per input
95 - 137 VAC - 16A 1 Pole Circuit Breaker per input
200 - 208 VAC - 16A 2 Pole Circuit Breaker per input
20A 2 Pole Circuit Breaker per input
2 x 15A 2 Pole Circuit Breaker
Panel Indicators LED LED LED LED
Physical and EnvironmentalGlobal NEMA
16 Amps 32 Amps (30 in part number nomenclature)
20 Amps 30 Amps
Size (Overall) 17.19”W x 1.75”H x 8.00”D
Weight ≈ 11 lbs. ≈ 13 lbs. ≈ 11 lbs. ≈ 13 lbs.
Operating Temp. 0 - 45°C (32 - 113°F)
Operating Humidity 0 - 95% (non-condensing)
Operating Elevation 0 - 10,000 ft. (0 - 3000 m)
Electrical & Mechanical Specifications
RS-232: Front panel DB-9F or DB-9M connectorRS-485/422 rear panel RJ-11Telnet with web interface (when ordered with LAN module)SNMPOther options available upon request
•••••
Communications:
Accessory (Optional):Temperature Sensor 72-1021-189 (Hookup wire not supplied)•
Spec
ialty
AC
Pow
er S
olut
ions
![Page 4: ac_smart](https://reader035.vdocuments.us/reader035/viewer/2022081805/55281bef497959710b8b4788/html5/thumbnails/4.jpg)
��1900 West College Avenue, State College, PA 16801 • 814-272-SPMS • [email protected]
7608 A D 20 12 S N T E
Part Number Configuration
AC SMARTstart
Voltage DesignA = AC
D = NEMA E = Global L = NEMA 5-20P fixed cord-set
Amperage20, or 30 for NEMA
16 or 30 (32*) for Global
* To configure a 32A Global PDU, you must enter “30” in the 7th and 8th digit of the part number.
Voltage12 = 120 VAC for NEMA24 = 230 VAC for Global
InputsS = 1 input, 1x8 configurationD = 2 inputs, 2x4 configuration(“D” is not available in 30 Amp)
Communications Options
N = Telnet
Transient Protection Options
T = Circuit protection (includes TMOV)
Emergency Power Off (EPO) option - add E to the end of the part
number
Part Number Voltage Input Input Connection
Output Connection
Configuration Communication
7608AD2012S 120VAC/47-63Hz IEC C20 NEMA 5-20R Single Input Serial RS232
7608AL2012S 120VAC/47-63Hz NEMA 5-20P on 10’ cord NEMA 5-20R Single Input Serial RS232
7608AE1624S 230VAC/47-63Hz IEC C20 IEC C13 Single Input Serial RS232
7608AD2012D 120VAC/47-63Hz IEC C20 NEMA 5-20R Dual Input Serial RS232
7608AE1624D 230VAC/47-63Hz IEC C20 IEC C13 Dual Input Serial RS232
7608AD3012S 120VAC/47-63Hz NEMA L5-30P on 10’ cord NEMA 5-15R Single Input Serial RS232
7608AE3024S 230VAC/47-63Hz IEC 309 30 Amp on 10’ cord IEC C13 Single Input Serial RS232
7608AD2012SN 120VAC/47-63Hz IEC C20 NEMA 5-20R Single Input Serial RS232 & Web/Telnet
7608AL2012SN 120VAC/47-63Hz NEMA 5-20P on 10’ cord NEMA 5-20R Single Input Serial RS232 & Web/Telnet
7608AE1624SN 230VAC/47-63Hz IEC C20 IEC C13 Single Input Serial RS232 & Web/Telnet
7608AD2012DN 120VAC/47-63Hz IEC C20 NEMA 5-20R Dual Input Serial RS232 & Web/Telnet
7608AE1624DN 230VAC/47-63Hz IEC C20 IEC C13 Dual Input Serial RS232 & Web/Telnet
7608AD3012SN 120VAC/47-63Hz NEMA L5-30P on 10’ cord NEMA 5-15R Single Input Serial RS232 & Web/Telnet
7608AE3024SN 230VAC/47-63Hz IEC 309 30 Amp on 10’ cord IEC C13 Single Input Serial RS232 & Web/Telnet
7608AD3024ST 230VAC/47-63Hz NEMA L6-30P on 10’ cord IEC C13 Single Input Serial RS232 & Transient Protection
7608AD2024DN-01 230VAC/47-63Hz NEMA L6-20P on 10’ cord NEMA L615R & NEMA L6-20R
Dual Input Serial RS232 & Web/Telnet
7608AD2024DN-02 230VAC/47-63Hz NEMA L6-20P on 10’ cord NEMA 6-15R Dual Input Serial RS232 & Web/Telnet
Ordering Information
(15 Amp also available)
Spec
ialty
AC
Pow
er S
olut
ions
![Page 5: ac_smart](https://reader035.vdocuments.us/reader035/viewer/2022081805/55281bef497959710b8b4788/html5/thumbnails/5.jpg)
��1900 West College Avenue, State College, PA 16801 • 814-272-SPMS • [email protected]
Mechanical Specifications
Top View:
Front View:
Back View:
Spec
ialty
AC
Pow
er S
olut
ions
Output Indicator LEDs
Breaker Off/On Start Power ButtonCommunications Switch
Web/TelnetRJ-45
PDA RS-232CDCE
Computer RS-232CDTE
Ready Light Remote & Local Lights
2x8-pin‘Quick Disconnect’ RJ-11/EIA RS-485
Connection
See Ordering Information for Outlet Configuration
AC Power Entry
8.00
(20.
32)
17.188(43.66)
1.74
5(4
.44)