acquip - cardan shaft alignment
DESCRIPTION
This presentation will give you an idea of the benefits of Cardan Shaft Alignment from ACQUIP. For more information visit us at http://www.acquip.com . Or call +1 305.538.7101 or email to [email protected]TRANSCRIPT
ACQUIP ServicesCardan Shaft Alignment: a few simple rules
• Offset misalignment only• Misalignment in either vertical or
horizontal plane• Angle present at each knuckle
should be the same• Angle at knuckle should not exceed
3.5 degrees
All Alignment Procedure Rules Apply
• Safety first• Clean up the mess• Rough soft foot correction• Rough alignment• Final soft foot correction• Final alignment
Determine Misalignment
• Take measurements at each knuckle.
• Take measurements from output shaft to input shaft.
Measurements at each knuckle
Measurements from Output
to Input Shaft
• Uncoupled alignment• Requires special
bracketing
Some Misalignment Must Exist
• At least 0.5 degrees at each knuckle.
• Keeps the splines lubricated
Don’t go over 3.5 degrees at
the knuckles
• High axial vibration• Damage bearings and
seals
Documentation
A report should be generated for any alignment. Report should at least include:
• As found alignment• As left alignment
Why ACQUIP SphereAction™ is The best Choice
for your Alignment Needs?• Alignment is our Passion; we are
experts in the field.• We think outside the box, we use
existing technology resources and apply it to new and complex problems.
• We travel for your planned outages and last minute emergencies.
• We guarantee our alignment work.
For More Information
Toll Free +1 855 ACQUIP1 Phone (305) 538 7101
PO Box 191502 Miami Beach, FL 33119
USA – Middle East – Latin America and beyond.
Find Us On