Program for Acoustics2016 The Second Australasian Acoustical Societies' Conference

Brisbane Convention Centre

9-11 November 2016

Wednesday 9 November 2016 8:00

Registration

8:30

SHORT COURSE

Classroom Acoustics - How Innovative Learning Environments are Changing the

Educational Playing Field

0830-1530

SHORT COURSE

Sound Perception - Application to Acoustic Practice and Design

0900 - 1530

SHORT COURSE

Noise Control Hints and Success

0900-1430

12:00

Technical Tour #1 - South Bank Parklands

1230-1530

Technical Tour #2 - UQ Centre for Hypersonics

1230-1530

15:30 Registration

16:00 Opening Ceremony

16:20 Plenary 1: Christine Erbe 014 The underwater soundscape around Australia

Chair: Michael Hayne Room: Boulevard Auditorium

17:00

17:15 Welcoming Function

19:15 Day 1 Close

Thursday 10 November 2016 8:00 Registration

8:55 Conference Introduction - Room

9:00 Plenary 2: Tapio Lokki 043 Why is it so hard to design a concert hall with excellent acoustics?

Chair: James Whitlock Room: Boulevard Auditorium

Session 1A: Architectural Acoustics Design Workshop 1

Chair: Ian Hillock Room: Boulevard Auditorium

Session 1B: Environmental Noise and Vibration Chair: John Macpherson

Room: Boulevard B1

Session 1C: Acoustical Practice 1 Chair: Roger Hawkins Room: Boulevard B2

Session 1D: Marine Bioacoustics 1 Chair: Christine Erbe Room: Boulevard B3

Session 1E: Rail Noise 1 Chair: Dave Anderson

Room: Arbour A2

9:45 Invited Paper: James Heddle 143 Room Acoustics for Listening

Dave Davis 003 Cost optimisation of noise control for industrial buildings

Invited Paper: Ross Palmer 098 Noise in Building - 1980 to 2015

Keynote: Michael Noad and Rebecca Dunlop 132 Marine mammals and the impacts of anthropogenic noise: Considerations for the design of large acoustic behavioural response studies such as BRAHSS

Invited Paper: Paul Meehan 107 A Smorgasbord of Railway Dynamic and Acoustic Phenomena

10:05 Cameron Hough 097 Room Acoustic Design of the Queensland University of Technology Creative Industries Precinct Phase 2 (CIP2)

Kym Burgemeister 100 Auralisation for Airport Noise Impact Assessments: Measurements and Applications

Richard Devereux 121 Validity of acoustic test data and design risks assoctiated with manufacturers test data

Arvind Deivasigamani 088 Comparison of rail noise prediction methodologies for elevated rail designs

10:25 Christian Nocke 115 Light, transparency and sound absorption

Robbie Blakelock 074 A Case Study of Specialist Acoustic Advice for a Large Multi-Stage Industrial Development on a Rural Greenfield Site

Oliver Wright 013 The role of acoustical design within architectural design in the early design phase

Lauren Hawkins 168 Using acoustics to study biological activity in the Perth Canyon, Western Australia

Michael Allan 138 Annoyance from the sudden onset of noise

10:45 Morning Tea Trade Exhibition Area

Session 2A: Architectural Acoustics Design Workshop 2

Chair: Tapio Lokki Room: Boulevard Auditorium

Session 2B: Acoustical Analysis Chair:

Room: Boulevard B1

Session 2C: Acoustical Practice 2 Chair: Richard Devereux

Room: Boulevard B2

Session 2D: Marine Bioacoustics 2 Chair: Michael Noad Room: Boulevard B3

Session 2E: Rail Noise 2 Chair: Paul Meehan

Room: Arbour A2

11:10 Damien Scott Holloway 157 Broadband acoustic scattering with modern aesthetics from random 3D terrain surfaces generated using the Fourier Synthesis algorithm

Xiaojun Qiu 163 Recent progress in research on virtual sound barriers

Invited Paper: Samuel Clarke 072 Managing risk in acoustics: The role of a consulting professional

Craig McPherson 019 Examining the value of the Acoustic Variability Index in the characterisation of Australian marine soundscapes

Invited Paper: Peter Karantonis 125 Use of ISO Measurement Uncertainty Guidelines to Determine Uncertainties in Noise & Vibration Predictions and Design Risks

11:30 James Heddle 126 Fresnel Zones and Spheroids for Room Acoustics

Khairul Affendy Md Nor 063 Time-domain estimation of acoustic radiation modes and active structural acoustic control

Roger Hawkins 148 A working acoustician's guide to Compliance and the NCC (BCA)

Montserrat Landero 045 Integrating echo-sounder and underwater video data for demersal fish assessment

Cameron Milne 110 Wear simulation for boundary lubricated, radially loaded, spherical roller bearings

11:50 Brendon Shanks 068 Modelling baffle configurations in virtual rooms

Md Ayub 136 Acoustic Absorption Behaviour of a Tall Carbon Nanotube Forest

Invited Paper: Norm Broner 161 Uncertainties in Acoustics

Arti Verma 109 Developing active broadband acoustic methods to investigate the pelagic zone of the Great Australian Bight

Russell Brown 131 An Examination of the Relationship Between the Nature of the Traffic Noise Source and the Resultant Internal Noise Levels Determined under QDC MP 4.4

12:10 Workshop Panel Discussion: Tapio Lokki, Damien Scott Holloway, James Heddle and Brendon Shanks

Meisha Stevens 102 The influence of the interaction between ideational factors, frequencies and stimulus factors on reported unpleasantness of recorded sounds

Workshop Panel Discussion: Acoustic practice - Richard Devereux, Norm Broner, Ross Palmer, Samuel Clarke

Alec Duncan 042 Transmission of marine seismic survey, air gun array signals in Australian waters

Panel Discussion: Acoustic Rail Noise - Paul Meehan, Peter Karantonis and Russell Brown

12:30 Luncheon

Session 3A: Architectural Acoustics Design Workshop 3

Chair: James Heddle Room: Boulevard Auditorium

Session 3B: Instrumentation and Measurement Chair: Matthew Terlich Room: Boulevard B1

Session 3C: Aeroacoustics 1 Chair: Danielle Moreau Room: Boulevard B2

Session 3D: Underwater Acoustics - Propagation 1

Chair: Michael Caley Room: Boulevard B3

Session 3E: Occupational Health and Safety

Chair: Marion Burgess Room: Arbour A2

13:30 Keynote: Christopher Day 169 The Philharmonie de Paris - Acoustic design and commissioning

Anthony Finn 024 An analysis of unmanned aerial vehicle-based acoustic atmospheric tomography

Keyote: Michael Kingan 123 Advanced Open Rotor Noise

Invited Paper: Alec Duncan 065 Estimating received sound levels at the seabed beneath seismic survey sources

Warwick Williams 008 The practicality of using a smart 'phone 'App' as an SLM and personal sound exposure meter (SoundLog)

13:50 Mathias Kersemans 172 Seeing (Ultra)sound in Real-Time through the Acousto-PiezoLuminescent Lens

Adrian Jones 080 Aspects of Modelling Coherent Acoustic Reflection from a Rough Seafloor

Mahbub Alam, Sheikh 010 Exposure to Ototoxic Agents and Noise in Workplace - A Literature Review

14:10 Cameron Hough 099 Acoustic Design of the Ukaria Cultural Centre Concert Hall

Kevin Rogers 028 Accurate sound speed estimation for Unmanned Aerial Vehicle-Based Acoustic Atmospheric Tomography

Akhilesh Mimani 083 Hybrid CFD-BEM and Time-Reversal techniques applied to localise flow-induced noise sources generated by a flat-plate

Alex Zinoviev 089 Easy-to-use closed-form equations for modal cut- on frequencies of a surface duct with an exponential sound speed profile

Peter Teague 086 Developments in the Description and Assessment of High Intensity Impulse Noise Exposure

14:30 Invited Paper: Christian Nocke 114 New standards in Architectural Acoustics - a German view

Invited Student Paper: Adrian O'Shea 177 Design and numerical analysis of a test-rig for the study of pipe-leak generated acoustic emissions

Jesse Coombs 039 Statistical estimation of trailing edge noise from finite wall-mounted airfoils

Yong Zhang 106 Pulse spreading and correlation loss in shallow water environments with rough sea surfaces and bottoms

Marek Podgorski 176 Methods of validation of occupational noise exposure measurement with multi aspect personal sound exposure meter

14:50 Workshop Panel Discussion: James Heddle, Christopher Day, Cameron Hough, Christian Nocke and Tapio Lokki

Alexander Rasa 053 Development of a small-scale reverberation room

Kam Lo 009 Supersonic bullet trajectory estimation using ballistic shock wave arrivals at an acoustic sensor array

Workshop Panel Discussion: Michael Caley, Alec Duncan, Adrian Jones, Alex Zinoviev, Yong Zhang.

Wyatt Page 092 Occupational noise law in New Zealand - Issues and future directions

15:10 Afternoon Tea Trade Exhibition Area

Session 4A: Design Standards Workshop Chair: Warwick Williams

Room: Boulevard Auditorium

Session 4B: Sound Quality and Reproduction Chair: Ben Hall

Room: Boulevard B1

Session 4C: Environmental Noise - Resources and Industry

Chair: Claire Richardson Room: Boulevard B2

Session 4D: Marine Platforms 1 Chair: Adrian Jones Room: Boulevard B3

Session 4E: Noise and Vibration Analysis Chair: Xia Pan

Room: Arbour A2

15:40 Invited Paper: Marion Burgess 069 Overview of Process for Australian Acoustics Standards

Keynote: William Martens 120 University Facilities for Critical Listening Training and Education on Multichannel Sound Production and Reproduction

James Boland 108 Pipeline Blowdown Noise Levels

David Bowden 054 Development of a large experimental acoustic transmission loss test bench suitable for large marine diesel exhaust system components

Linus Yinn Leng Ang 047 Sound transmission loss of a large-scale meta-panel with membrane acoustic metamaterial

16:00 Michael Hayne 060 A Comparison of Acoustic Criteria within Green Building Rating Tools, Schemes and Standards

Dave Davis 004 How to maximise the operating fleet and still comply with the noise limits

Andrew Youssef 055 Measurement of pressure fluctuations inside a model thrust bearing using PVDF sensors

Tapan K. Mahanta 160 Structural- acoustic coupling of circular membrane backed by cylinder cavity using mode coupling approach

16:20 Oliver Kornadt 113 New regulations on sound insulation in buildings in Germany

Peter Hüttenmeister 095 Perceiving changes in cathedral ceiling height in a multichannel virtual acoustic rendering for Gregorian chant

Tim Procter 025 Noise management in the NSW coal industry

Stephen Moore 112 A review of noise and vibration in fluid-filled pipe systems

Saeid Hedayatrasa 070 On topology optimization of acoustic metamaterial lattices for locally resonant bandgaps of flexural waves

16:40 Philip Setton 094 Speech Privacy outcomes from Green star Design and As-Built v1.1 rating tool

Weicong Li 081 Some secrets of good musicians: the physics controlling articulation and timbre in reed instruments

Jeffrey Parnell 061 Are cumulative noise criteria relevant for the assessment of mining noise?

Kyle Saltmarsh 059 The Effect of a Static Pressure Field on the Frequency Response of a Clamped Circular Plate

Joseph Spagnol 178 Breathing response in a statically indeterminate cracked rotor

17:00 Workshop Panel Discussion: Warwick Williams, Marion Burgess, Michael Hayne, Oliver Kornadt and Philip Setton

David Stepanavicius 111 Interaural cross-correlation affects perceived elevation of auditory images presented via height channels in multichannel audio reproduction systems

Jesse Tribby 124 Assessing the Accuracy of Directional Real-Time Noise Monitoring Systems

Langdon Heath 174 Effects of the characteristics of a force-driven bulkhead on the structural acoustics of an elastic cylinder

Joseph Spagnol 179 The effect of elliptical-front crack shape on the breathing mechanism of a crack in a rotating shaft

17:20 Close of Technical Program for Day 1

17:30 AAS Annual General Meeting Room: Boulevard B1

ASNZ Annual General Meeting Room: Boulevard B2

19:00 - 23:30 Congress Dinner

Boulevard Room

Friday 11 November 2016 9:00 Plenary 3: Mark Bastasch

119 Wind turbine sound: past, present, and future Chair: Ian Hillock

Room: Boulevard Auditorium

Session 5A: Wind Farm Workshop 1 Chair: Ian Hillock

Room: Boulevard Auditorium

Session 5B: Building Acoustics Chair: Grant Emms

Room: Boulevard B1

Session 5C: Environmental Acoustics Chair: Frank Henry

Room: Boulevard B2

Session 5D: Underwater Acoustics - Propagation 2

Chair: Alec Duncan Room: Boulevard B3

Session 5E: Road Traffic Noise 1 Chair: Russell Brown

Room: Arbour A2

9:45 Keynote: Miklin Halstead 167 Wind Farm Noise Compliance Assessments - How much data is too much data?

Cameron Hough 096 Building Acoustic Design of the Queensland University of Technology Creative Industries Precinct Phase 2 (CIP2)

Alex Marchuk 087 Regulatory Strategies for Managing Noise from Outdoor Music Concerts

Adrian Jones 017 Estimates of the Coherent Leakage of Sound from an Ocean Surface Duct

Irene van Kamp 005 A systematic review of evidence of the effect of transport noise interventions on human health

10:05 Neil Mackenzie 158 Noise and Vibration Design Aspects for an Indoor Theme Park Valeri Lenchine

023 Strategic noise mapping of Adelaide CBD

Alexei Kouzoubov 006 Bubble cloud generation by an air gun

Marc Buret 058 Measuring the environmental performance of Melbourne's road network

10:25 Workshop Panel Discussion: Ian Hillock, Mark Bastasch, Miklin Halstead, Chris Turnbull and Tom Evans

Sipei Zhao 165 A preliminary investigation on the sound field properties in the Sagrada Familia Basilica

David Anderson 129 Monitoring ground borne and structure borne noise for management of construction impacts

Michael Caley 049 Probing the Underwater Acoustic Communication Channel off Rottnest Island, WA

S Zhang 066 Regional detailed transport noise modelling - issues and outcomes

10:45 Morning Tea Trade Exhibition Area

Session 6A: Wind Farm Workshop 2 Chair: Norm Broner

Room: Boulevard Auditorium

Session 6B: Building Acoustics - Structure Borne

Chair: David Borgeaud Room: Boulevard B1

Session 6C: Environmental Noise Policy and Regulation

Chair: Dave Davis Room: Boulevard B2

Session 6D: Underwater Acoustics Chair: Alexei Kouzoubov

Room: Boulevard B3

Session 6E: Road Traffic Noise 2 Chair: Marc Buret Room: Arbour A2

11:10 Invited Paper: Tom Evans 071 A review of Australian wind turbine noise assessment procedures

Oliver Kornadt 116 Characterisation of structure-borne sound sources

Keynote: John Macpherson 156 A Framework for the Regulation of Environmental Noise

Dave Matthews 077 Control of directivity of PVDF hydrophones using anisotropic substrates

Dominic Sburlati 085 Using OBSI measurements of road surface corrections to improve noise modelling predictions

11:30 Invited Paper: Chris Turnbull 170 Improving the accuracy of noise compliance monitoring of wind farms

Thomas Roseby 166 Investigation of Impact Isolation of Flooring Products and Resilient Underlays

Ben Travaglione 051 Using a single-board microcontroller and ADC to perform real-time sonar signal processing

Russell Brown 130 A Re-Examination of the Relationship Between the L10(18hour) Noise Level Parameter and Other Road Traffic Noise Level Parameters

11:50 Workshop Panel Discussion: Norm Broner, Tom Evans and Chris Turnbull

Timothy Murray 101 Comparative impact performance of lightweight gym floors

Frank Henry 090 Industrial Noise Policy in Brisbane

Christian Audoly 155 Standardization in Underwater Acoustics - Current status and on-going actions

Lex Brown 007 Measurement of noise events in road traffic streams: Initial results from a simulation study

12:10 Peter Horne 133 Two recent sound insulation test results

Steph Metz 154 Review of noise policies in Victoria

Workshop Panel Discussion: Alexei Kouzoubov, Dave Matthews, Ben Travaglione, Christian Audoly

Workshop Panel Discussion: Marc Buret, Dominic Sburlati, Russell Brown, Lex Brown

12:30 Luncheon

Session 7A: Acoustics for Educational Spaces Chair:

Room: Boulevard Auditorium

Session 7B: Transmission Loss Chair: Peter Horne

Room: Boulevard B1

Session 7C: Workshops Room: Boulevard B2

Session 7D: Marine Platforms 2 Chair:

Room: Boulevard B3

Session 7E: Aeroacoustics 2 Chair: Michael Kingan

Room: Arbour A2

13:30 Invited Paper: James Whitlock 147 Innovative Learning Environments - the Good, the Bad, and the Ways to get them Working

Mohammad Sazzad Mosharrof 018 Effects of finite cavities within a finite double-leaf panel on sound transmission loss

Workshop on Accreditation of Acoustical Consultants Chair: Norm Broner Panel: Luke Zoontjens, Marion Burgess

Darryl McMahon 153 Symmetry of wave propagation and attenuation in an infinite 1D periodic structure under the interchange of forward and backward scattering coefficients

Invited Paper: Danielle Moreau 029 An experimental study of airfoil tip vortex formation noise

13:50 Tom Krikke 037 Design targets for Child Care Facility in the vicinity of intermittent noise sources

George van Hout 021 Relationship between flanking sound over a common separating wall and plenum absorption

Marshall Hall 036 On the prediction of shell vibration and sound radiation by different thin-shell theories when a submerged empty cylindrical shell is driven by an axisymmetric force

Paul Croker 117 Low Mach number flow induced noise prediction of wall mounted airfoil using a hybrid RANS-BEM technique

14:10 Stuart McLaren 141 Soundfield technology in an innovative learning environment

Grant Emms 079 An acoustically isolating timber-frame connection system

City Council Discussion (Closed Session) Chair: Frank Henry

Xia Pan 041 The effect of boundary conditions and ribs on the total radiation efficiency of submerged plates

Sipei Zhao 164 Estimation of the frequency boundaries of the inertial range for wind noise spectra in anechoic wind tunnels

14:30 Kiri Mealings 145 Classroom acoustic conditions: Understanding what is suitable through a review of national and international standards, recommendations and live classroom measurements

James Heddle 128 Average Sound Transmission Loss of Steel Stud Partitions

James Forrest 118 Sound radiation from a submerged stiffened cylinder with acoustic excitation

Jeoffrey Fischer 016 Aeroacoustic beamforming of a model wind-turbine in anechoic and reverberant environments

14:50 Workshop Panel Discussion: James Whitlock, Tom Krikke, Stuart McLaren, Kiri Mealings

Cheng Yang 173 On the acoustic properties of a hole in a wall of finite thickness

Paul Dylejko 050 Mapping Noise and Efficiency for Marine Propeller Designs

Kirsty Tanner 149 Aeroacoustic Assessment of Facades

15:10 Afternoon Tea Trade Exhibition Area

15:40 Plenary 4: Claire Richardson 139 The Historical and Current Challenge of Environmental Noise Nuisance

Chair: David Mee Room: Boulevard Auditorium

16:30 Conference Closing Prize for Trade Show participation