acessories thermo
TRANSCRIPT
Accessories for HPLC & GCChoose accessories from Thermo to enhance and optimize the performance of your chromatography instruments. A range of HPLCconnectors, fittings and tubing is available, including the SLIPFREE™
universal connector. For the GC and GC/MS user, Thermo offers fittings,septa, gas filters and injection port liners including the ThermoFocusLiner™. Thermo also supplies a wide range of vials and syringes for both HPLC and GC applications.
Tap our technical experts for help in selecting the chromatographyaccessories that you need to make the most of your system.
Accessories
SLIPFREE HPLC Column ConnectorsUniversal self-adjusting connections
• Unique self-adjusting design for void-free and leak-free connections
• Universal connectors compatible with all column end-fittings
• Stainless steel threads eliminate particle generation from PEEK™ fittings
• Fingertight connections to 10,000 psi –excellent for SFC
• Convenient SLIPFREE™ sample loop design
Unique Self-Adjusting DesignSLIPFREE connectors offer a rugged and easyway to ensure good column connections. TheSLIPFREE connector design provides a void-free connection because it actually pushesthe tubing and ferrule into the end-fitting.The separate tube holding and connection-sealing functions provide a better connectionand better hardware lifetime. Because pres-sure is applied to the tubing rather than theferrule, when the SLIPFREE connector isremoved, the ferrule will not become lodgedin the end-fitting. The movable Vespel™ frontferrule allows the SLIPFREE connector toeasily adjust to any commercially availableHPLC or SFC column end-fitting. Used overand over again, the SLIPFREE connectorreadjusts to fit each new column connection.Even when different column brands are usedon a single HPLC system, SLIPRFREE connec-tors provide all the same benefits.
Choice of ConfigurationsThe SLIPFREE connector is available in bothsingle and double configurations. The doubleSLIPFREE is useful when frequent connec-tions and disconnections will be madebetween HPLC columns and injectors ordetectors. The single SLIPFREE connector isuseful when only the column is changed.SLIPFREE connectors are available in flexible1/32" OD tubing as well as standard 1/16"OD tubing, in various lengths. SLIPFREE connectors come in 0.010" ID for routinework, 0.005" ID for use with small-bore andmicrobore columns, and 0.020" ID for semipreparative and preparative connections, orfor connections ahead of the injector. PEEK-collared SLIPFREE connectors are ideal forhigher temperature applications such as SFC.Long-neck SLIPFREE connectors have anextra long nut on the end which allowsimproved reach into tight spaces. SLIPFREEconnectors come standard with Vespel ferrules.SLIPFREE sample loops are compatible withRheodyne™ and Valco™ injectors. PEEK andKel-F™ ferrules are available for applicationswhere Vespel is not suitable, such as withstrong acids or bases.
HPLC Accessories
All brands and products are trademarks of their respective companies.130
Between Columnand Detector
Between Guardand Column
Between Injectorand Column
Where to use a SLIPFREE Connector
Between Guardand Injector
SLIPFREE™ Sample Loop Description Length ID Part Number
10 µL Long-neck Loop 20 cm 0.010" 31620
20 µL Long-neck Loop 40 cm 0.010" 31640
50 µL Long-neck Loop 25 cm 0.020" 32625
100 µL Long-neck Loop 50 cm 0.020" 32650
250 µL Long-neck Loop 125 cm 0.020" 32699
SLIPFREE FerruleDescription Part Number
PEEK Sealing Ferrule 36023
Vespel™ Sealing Ferrule 36024
Kel-F ™ Sealing Ferrule 36025
Accessories
All brands and products are trademarks of their respective companies. 131
Ordering InformationDescription Length 0.005" ID 0.010" ID 0.020" ID
Single 6 cm 30106 31106 32106
10 cm 30110 31110 32110
20 cm 30120 31120 32120
30 cm 30130 31130 32130
Double 6 cm 30206 31206 32206
10 cm 30210 31210 32210
20 cm 30220 31220 32220
30 cm 30230 31230 32230
Single Flexible 10.5 cm 30111-FLEX 39111-FLEX N/A
15 cm 30115-FLEX 39115-FLEX N/A
28 cm 30128-FLEX 39128-FLEX N/A
40 cm 30140-FLEX 39140-FLEX N/A
Double Flexible 10.5 cm 30211-FLEX 39211-FLEX N/A
15 cm 30215-FLEX 39215-FLEX N/A
28 cm 30228-FLEX 39228-FLEX N/A
40 cm 30240-FLEX 39240-FLEX N/A
Single PEEK™ Collared 6 cm 30306 31306 32306
10 cm 30310 31310 32310
20 cm 30320 31320 32320
Double PEEK Collared 6 cm 30406 31406 32406
10 cm 30410 31410 32410
20 cm 30420 31420 32420
Single Long-neck 10 cm 30510 31510 N/A
20 cm 30520 31520 N/A
Double Long-neck 10 cm 31710 32710 N/A
20 cm 31720 32720 N/A
PEEK One Piece Column CouplerIdeal for high throughput screening and quick connection
• Fingertight, leak free connection• Minimizes dead volume• Inert and biocompatible material
The PEEK™ one piece column coupler is idealfor connecting analytical and guard columnswith 10-32 threads, minimizing system deadvolume and loss of column efficiency with afingertight, pressure resistant connection.The PEEK material is inert and biocompatiblefor a broad range of applications.
Ordering InformationDescription Part Number
One Piece Coupler 60170-370
HPLC Accessories
All brands and products are trademarks of their respective companies.132
Accessories
All brands and products are trademarks of their respective companies. 133
Solvent Inlet FiltersHPLC pump protection
• Stainless steel 10 µm inlet filters forlonger lifetime
• Bottom-of-the-Bottle™ solvent filtersfor efficient draw
Thermo offers stainless steel solvent inletfilters that have a large surface area for along lifetime.
These filters are easy to change with no tools required. Inlet solvent filters areavailable with stems to slip into the inlettubing, or with a fingertight nut. Bottom-of-the-Bottle inlet filters are made from 100%PEEK™ polymer, including two 2 µm frits. Theflat design draws virtually all the solventfrom the reservoir. A helium sparge port andfrit is built in for optional use. The press-fitdesign accepts 1/8" OD tubing. Nuts are alsoavailable for convenient fingertight fittings,complete with a replaceable PEEK ferrule.
Ordering InformationDescription Part Number
Solvent Inlet Filter with 1/16" O.D. tube to slip into 1/8" O.D. plastic tubing,10 µm filter A-302
Solvent Inlet Filter with 1/8" polypropylenenut to fit 1/8" O.D. tubing, 10 µm filter A-302A
100% PEEK Bottom-of-the-Bottle SolventInlet Filter for 1/8" O.D. tubing, helium A-437sparge, 2 µm filter
100% PEEK Bottom-of-the-Bottle Solvent Inlet Filter for 3/16" O.D. tubing, helium sparge, 2 µm A-436filter (typically for Waters™ systems)
High Pressure FittingsStainless steel and PEEK nuts and ferrules for a wide range of configurations
• Stainless steel Fingerlok™ nut andPEEK™ fingertight end-fittings
• Stainless steel nuts and ferrulesdesigned for a wide range of 10-32port configurations
• One piece PEEK fingertight fittings• Column end plugs
Stainless Steel FittingsThermo offers a variety of fittings designedfor a wide range of 10-32 port configurations.Nuts and ferrules are precision machinedfrom 316 stainless steel to be burr and contaminant free. They are available in hex nut design to match popular fittings.Two-piece Fingerlok nuts are also availablefor convenient fingertight fittings. Thesecome with a replaceable PEEK ferrule.
PEEK Fingertight FittingsThermo offers fingertight fittings machinedfrom PEEK polymer for reliability and ease ofuse. Fingertight PEEK fittings are resistant to cracking, breaking, thread stripping andleakage in both low and high pressure applications. They are available as a twopiece nut and ferrule, or in a convenient one-piece design. PEEK is biocompatible for a broad range of applications.
Internal Reducing UnionsStainless steel internal reducing unions are used to connect 30 to 50 mm ID preparative columns to 1/16" tubing.
HPLC Accessories
All brands and products are trademarks of their respective companies.134
Ordering Information
Stainless Steel FittingsDescription Quantity Part Number
Two piece SS Fingerlok 10-32 nut with PEEK ferrule, 1/16" 1 F-190Replacement PEEK ferrules 10 F-192x
Universal SS 10-32 male hex nut 10 U-400xUniversal SS ferrule, 1/16" 10 U-401x
Valco SS 10-32 male hex nut 10 U-320xValco SS ferrule, 1/16" 10 U-321x
Waters™ compatible SS 10-32 male hex nut 10 U-410xWaters SS ferrule, 1/16" 10 U-401x
RheFlex™ SS 10-32, 1/16" short fittings set 5 6000-10910 6000-209
RheFlex SS 10-32, 1/16" long fittings set 5 6000-11110 6000-211
RheFlex SS 10-32, 1/16" extra long fittings set 5 6000-16210 6000-262
RheFlex SS ferrule, 1/16" 5 6000-11010 6000-210
RheFlex SS ferrule, 0.5 mm (for Model 8125 only) 1 8125-084
PEEK Fingertight FittingsDescription Quantity Part Number
One piece PEEK fingertight fitting, 1/16", 0.37" head 10 F-120x
One piece PEEK long fingertight fitting, 1/16", 0.37" head 10 F-130x
One piece PEEK fingertight fitting, 1/32", 0.25" head 10 M-645x
Two piece PEEK fingertight wing nut with PEEK ferrule, 1/16" 10 F-300x
Replacement PEEK ferrules 10 F-142x
Column end plugs, 1/16", 10-32 coned, Delrin, black 10 U-467BLKxColumn end plugs, 1/16", 10-32 coned, Delrin, red 10 U-467Rx
Reducing Unions for Preparative ColumnsDescription Quantity Part Number
1/8" to 1/16" internal reducer without frit, 1.0 mm bore 1 60182-357
PEEK Unions, Tees and CrossesFor high pressure applications
• Available in stainless steel, biocompatible PEEK™ polymer, or stainless steel with a PEEK insert
• Absolute zero or low dead volume formats
Accessories
All brands and products are trademarks of their respective companies. 135
Ordering Information
Stainless Steel Unions, Tees and CrossesDescription Through Hole Swept Volume Part Number
Union, stainless steel, Upchurch Scientific™/Parker™ fittings compatible, includes 2 stainless steel nuts and ferrules 0.010" 0.025 µL U-435
Union, stainless steel, Upchurch Scientific/Parker fittings compatible, includes 2 stainless steel nuts and ferrules 0.020" 0.134 µL U-402
Union, stainless steel, Upchurch Scientific/Parker fittings compatible, includes 2 stainless steel nuts and ferrules 0.050" 0.836 µL U-437
Union, stainless steel, Upchurch Scientific/Parker fittings compatible, includes 2 stainless steel nuts and ferrules 0.062" ~ 0.0 µL U-438
Union, stainless steel, Waters™ fittings compatible,includes 2 stainless steel nuts and ferrules 0.020" 0.129 µL U-412
Union, stainless steel, Valco™ fittings compatible,includes 2 stainless steel nuts and ferrules 0.020" 0.103 µL U-322
Tee, stainless steel, 10-32 fittings for use with 1/16" OD tubing 0.020" 0.57 µL U-428
Cross, stainless steel, 10-32 fittings for use with 1/16" OD tubing 0.020" < 0.72 µL U-430
PEEK and PEEK Lined Unions, Tees and CrossesDescription Through Hole Swept Volume Part Number
Union, PEEK polymer, includes two PEEK 2-piece fittings 0.010" 0.070 µL P-742Union, PEEK polymer, includes two PEEK 2-piece fittings 0.020" 0.28 µL P-704
Tee, PEEK, 10-32 fittings for use with 1/16" OD tubing, 0.020" < 0.57 µL P-727includes three 10-32 PEEK double-winged nuts
PEEK, 10-32 fittings for use with 1/16" OD tubing, 0.020" < 0.72 µL P-729includes four 10-32 PEEK double-winged nuts
Pre-cut PEEK TubingColor-coded for easy identification and use
• Broad chemical compatibility• Biocompatible• Easily cut to a desired length• Appropriate for many HPLC
applications
PEEK™ tubing is designed to work in mostHPLC applications, particularly reversedphase with aqueous mobile phases. It is supplied in pre-cut lengths, but is easily cutto a desired length. PEEK tubing is availablein a range of internal diameters and can beused with standard fingertight fittings.
PEEK tubing is resistant to most organicsolvents. However, nitric acid, sulfuric acid,dichloromethane, THF and DMSO are not recommended.
Ordering Information
1/16" OD Precut PEEK TubingDescription Length (cm) Color Part Number
0.003" 5 Natural 37003-5
10 Natural 37003-10
20 Natural 37003-20
30 Natural 37003-30
50 Natural 37003-50
100 Natural 37003-100
0.005" 5 Red 37005-5
10 Red 37005-10
20 Red 37005-20
30 Red 37005-30
50 Red 37005-50
100 Red 37005-100
0.007" 5 Yellow 37007-5
10 Yellow 37007-10
20 Yellow 37007-20
30 Yellow 37007-30
50 Yellow 37007-50
100 Yellow 37007-100
0.010" 5 Blue 37010-5
10 Blue 37010-10
20 Blue 37010-20
30 Blue 37010-30
50 Blue 37010-50
100 Blue 37010-100
0.020" 5 Orange 37020-5
10 Orange 37020-10
20 Orange 37020-20
30 Orange 37020-30
50 Orange 37020-50
100 Orange 37020-100
1/16" OD PEEK Tubing, 5-Foot Coil Description Part Number
0.003" 37003
0.005" 37005
0.007" 37007
0.010" 37010
0.020" 37020
0.030" 37030
0.040" 37040
HPLC Accessories
All brands and products are trademarks of their respective companies.136
Polymer Tubing CutterThe polymer tubing cutter produces a flat, 90°, burr-free end that is difficult to obtain with other tubing cutters. It is compatible with standard rigid polymer tubing, such as PEEK and Teflon™‚ and it comes complete with guide holes for 1/16" and 1/8" tubing, as well as five replacement blades.
Ordering InformationDescription Part Number
Polymer tubing cutter (for 1/16" and 1/8" OD) A-327
Replacement blades (5/pk) A-328
Accessories
All brands and products are trademarks of their respective companies. 137
PEEKsil Capillary Tubing: Fused Silica Lined PEEK TubingExcellent chemical compatibility and very low carryover
• Precision-bore fused silica tubing• Usable in most standard
chromatography systems• Withstands high pressures
PEEKsil™ fused silica lined PEEK™ tubing is manufactured using precision bore fused silica tubing coated with a 1/16" OD PEEK covering.The tubing can withstand high pressures,which makes it an ideal choice for capillaryHPLC and LC/MS. The tubing has a verysmooth internal surface for excellent flowcharacteristics, which leads to improvedreproducibility and resolution, and higherefficiency.
PEEKsil tubing is quite stiff and is difficult to bend without damaging the fusedsilica core. As such, it is not recommendedfor sections of the system where tubingbends are required. The tubing cannot be cutin the laboratory and is therefore limited topre-cut lengths only.
Ordering InformationDescription Length (cm)* Quantity Part Number
0.002" (50 µm) 10 5 60182-500
20 5 60182-501
50 2 60182-502
0.004" (100 µm) 10 5 60182-503
20 5 60182-504
50 2 60182-505
0.007" (175 µm) 10 5 60182-506
20 5 60182-507
50 2 60182-508
* It is recommended that PEEKsil tubing be used in the lengths provided, as damage may occur upon cutting.
1/16" OD PEEK Sleeves for Fused Silica Capillary TubingSleeve ID (inches) Sleeve ID (mm) Color Part Number
0.008 0.203 Yellow F-227
0.010 0.254 Blue F-228
0.012 0.305 Natural F-229
0.015 0.381 Orange F-230
0.021 0.530 Natural F-231
0.030 0.762 Natural F-232
316 Stainless Steel Capillary TubingCleaned, polished and passivated ready-to-use tubing
• Available in 1/16" and 1/32" OD• Suitable for ultra high pressure
applications• Wide chemical compatibility
Stainless steel tubing is available in a rangeof precut lengths and ID’s. Each length oftubing has pre-finished, square, burr-freeends and interiors to ensure minimum dead volume connections. It is cleaned andpassivated and ready for immediate installa-tion. Stainless steel tubing is required forultra high pressure applications where plastic or hybrid tubing will not work.
Stainless steel tubing is reasonably flexible, but is best when bends are kept to a minimum. The tubing also has a roughinternal surface, which could lead to samplecarry-over. Stainless steel tubing is not recommended for biological samples .
Ordering Information
1/16" OD Precut 316 Stainless Steel TubingDescription Length (cm) Color Part Number
0.005" 5 Red U-152
10 Red U-153
20 Red U-154
30 Red U-155
50 Red U-156
100 Red U-157
0.007" 5 Black U-126
10 Black U-127
20 Black U-128
30 Black U-129
50 Black U-130
100 Black U-131
0.010" 5 Blue U-111
10 Blue U-112
20 Blue U-113
30 Blue U-114
50 Blue U-132
100 Blue U-133
1/32" Precut 316 Stainless Steel Tubing with 1/16" SleevesDescription Length (cm) Colour Part Number
0.005" 10.5 Red 30011-FLEX
15 Red 30015-FLEX
28 Red 30028-FLEX
40 Red 30040-FLEX
0.007" 10.5 Yellow 39011-FLEX
15 Yellow 39015-FLEX
28 Yellow 39028-FLEX
40 Yellow 39040-FLEX
1/16" 316 Stainless Steel Tubing, 5-Foot CoilDescription Part Number
0.005" U-158
0.007" U-108
0.010" U-106
0.020" U-105
0.030" U-107
0.040" U-144
0.046" U-151
HPLC Accessories
All brands and products are trademarks of their respective companies.138
Terry Tool™ Tubing CutterThis tool cuts 1/16" or 1/8" stainless steel tubing, producing a clean, 90° cut.
Description Part Number
1/16" Tubing Cutter 60182-509
1/8" Tubing Cutter 60182-510
Straight cut tubing fromTerry Tool cutter
Poorly cut tubing
Accessories
All brands and products are trademarks of their respective companies. 145
Click-On Inline FiltersEliminate contamination with easy-to-use filters
• 99.9999% pure gas output• No carrier gas line contamination
during filter change• Easy and fast replacement without
need for tools• No risk of over tightening of fittings• Cost effective• He pre-conditioned available for
MS detection• TUEV approved
The Click-On™ Inline gas filtering system isdesigned with ease of use and gas quality(99.9999% or 6.0 grade) in mind. Re-useableend fittings remain installed on the gas lineduring filter replacement, reducing the costof clean gas. These unique patented end
fittings incorporate needle valves that closethe lines and prevent contamination. Filtersare available to remove oxygen, moisture,hydrocarbons, including a Click-On inlineCombi filter to remove moisture and oxygen,or a Triple filter to remove all three.
Filter Outlet Quality Capacity Useable Gases Color Change
Moisture > 6.0 15 g H2O He; Air; H2 Yellow to transparent
Oxygen > 6.0 2000 mL O2 Inert Green to gray
Hydrocarbons > 6.0 24 g HCs He; Air; H2 N/A
Combi (H2O, O2) > 6.0 7 g H2O He; Air; H2 Moisture and O2
Triple (H2O, O2, HC) > 6.0 4 g H20, 1000 mL O2, 8 g HCs Inert See Combi
Indicating Triple (H2O, O2, HC) > 6.0 3 g H20, 400 mL O2, 5 g HCs Inert See Combi
Ordering InformationDescription Quantity Part Number
Click-On Inline Moisture Filter 1 60180-801
Click-On Inline Oxygen Filter 1 60180-802
Click-On Inline Hydrocarbon Filter 1 60180-803
Click-On Inline Combi (Oxygen & Moisture) 1 60180-804
Click-On Inline Triple, (Oxygen, Moisture & Hydrocarbons) 1 60180-805
Click-On Inline Triple (He preconditioned) 1 60180-806
Click-On Inline Indicating Triple 1 60180-807
Click-On Inline Indicating Triple (He preconditioned) 1 60180-808
1/8" Brass Re-useable End Fittings 2 60180-809
1/8" Steel Re-useable End Fittings 2 60180-810
1/4" Brass Re-useable End Fittings 2 60180-811
1/4" Steel Re-useable End Fittings 2 60180-812
Double-ended Cartridge Connector to connect filter to indicator 1 60180-813
Wall Mounting Clamp 4 60180-834
Replacement O-rings 10 60180-833
GC Accessories
All brands and products are trademarks of their respective companies.146
Super Clean Cartridge FiltersOutput high purity gas easily
• Easy replacement without need for tools
• No carrier gas line contamination during cartridge change
• 99.9999% pure gas output• Cost effective• Unique He pre-conditioned units
available for MS detection• TUEV approved
The Thermo Super Clean™ range of cartridgegas filtering systems is designed with easeof use and gas quality (99.9999% or 6.0grade) in mind. The filter base plate is a one-time installation procedure and can beconfigured to the individual requirements ofthe user. Needle valves ensure the gas lineis not contaminated during cartridge change.
Filter Outlet Quality Capacity Useable Gases Color Change
Moisture > 6.0 7.2 g H2O Inert; Air; H2, He
Oxygen > 6.0 1000 mL O2 Inert
Hydrocarbons > 6.0 12 g (n-butane) Inert; Air; H2 N/Ahydrocarbons
Combi (H2O, HC) > 6.0 3.5 g H2O Inert; Air; H2, He Moisture and O26 g HC’s
Triple (H2O, O2, HC) > 6.0 1.8 g H2O Inert See Combi500 mL O24 g HC’s
Ordering InformationDescription Quantity Part Number
Base plate for 1 filter 1 60180-814
Base plate for 2 filters 1 60180-815
High flow 2 filter base plate for N2 in LC/MS or H2O in H2/air-generators 1 60180-816
Base plate for 3 filters 1 60180-817
Base plate for 4 filters 1 60180-818
Moisture cartridge with indicator 1 60180-819
Oxygen cartridge with indicator 1 60180-820
Hydrocarbon cartridge 1 60180-821
GC cartridge bundle of 3 (Triple + 2x HC/H2O Combi) 1 60180-822
GC cartridge bundle of 4 (O2, H2O + 2x HC) 1 60180-823
GC cartridge triple (O2 + H2O + HC) 1 60180-824
GC cartridge triple (O2/H2O/HC) He preconditioned 1 60180-825
GC cartridge combi (HC/H2O) 1 60180-826
4 cartridges (O2/H2O/2x HC + Base) 1 60180-827
3 cartridge kit (Triple + 2x Combi + Base) 1 60180-828
He preconditioned kit (Base + Triple Cartridge 1 60180-829
Gas filter kit (Base + Triple Cartridge) 1 60180-830
Twin HC filters for high flow base plate (LC/MS) (No indicator) 1 60180-831
High flow twin H2O filters (air generators) 1 60180-832
Replacement O-rings for base plates 1 60180-837
Flush cap (allows gas flow without filter) 1 60180-838
High flow bundle (2x HC) no indicator for LCMS 1 60180-839
High flow bundle (2x HC) with indicator for LCMS 1 60180-840
High flow bundle (2x H20) with indicator for LCMS 1 60180-841
Description Contains Use
Single Base Triple Filter Carrier gas only
Dual Base 2 x Combi Air & fuel gas
Triple Base Triple & 2 x Combi Carrier, make up and fuel
Four Position Moisture, Oxygen, 2 x Hydrocarbon High capacity carrier, fuel & make up
Accessories
All brands and products are trademarks of their respective companies. 147
Capillary Accessories
Ordering Information
Retention Gap KitsDescription Part Number
Retention gap kit, ID 0.22-0.32 mm, 2 m (includes connectors) 260RG497
Retention gap kit, ID 0.53 mm, 2 m (includes connectors) 260RG499
Deactivated silica tubing, ID 0.32 mm, 2 m 260G498P
Deactivated silica tubing, ID 0.53 mm, 2 m 260G499P
Mini Capillary UnionsDescription Quantity Part Number
For 0.32 mm ID capillary 1* 290GU498
For 0.53 mm ID capillary 1* 290GU499
* Kit contains 1 union and 5 ferrules
Column End Caps
Reusable universal capillary end caps fit all capillary column ID’s and eliminate column contamination caused by leaving the column unsealed or sealed with a septum. The fittings arecolor coordinated to ensure that column is re-installed the same way it came out, preventingdetector contamination.
Description Quantity Part Number
Capillary column end caps 10 pairs 260EC111
Liners for Thermo Range of InstrumentsInstrument I.D. x O.D. x Length (mm) Injection Type Quantity Part Number
TRACE™ & FOCUS™ SSL 5 x 8 x 105 Splitless 5 453T2895Use 70 mm Needle
TRACE & FOCUS SSL 5 x 8 x 105 Splitless 5 453T2999Use 50 mm Needle
TRACE & FOCUS SSL 5 x 8 x 105 Split 5 453T1905Use 50 mm Needle
TRACE & FOCUS SSL 3 x 8 x 105 Split 5 45350031
TRACE & FOCUS SSL 5 x 8 x 105 Split 5 45350030
TRACE & FOCUS SSL 3 x 8 x 105 Splitless 5 45350032
TRACE & FOCUS SSL 5 x 8 x 105 Splitless 5 45350033
TRACE PTV 1 x 2.75 x 125 PTV 5 45352054
TRACE PTV 2 x 2.75 x 120 PTV-LVI 5 45352060
TRACE PTV 2 x 2.75 x 120 PTV 5 45352057
TRACE PTV 1 x 2.75 x 120 PTV 5 45352062
Mega 4000, 5000, 6000 3 x 5 x 79.5 Split 5 45350400
Mega 4000, 5000, 6000 5 x 5 x 79.5 Split/Splitless 5 453T2955
Mega 4000, 5000, 6000 2 x 5 x 79.5 Split 5 45350300
Note: Liners not drawn to scale.
GC Accessories
All brands and products are trademarks of their respective companies.148
GC Injection LinersImproved, reproducible vaporization
• Full range for Thermo and other GCs• Highly deactivated borsilicate glass• FocusLiner™ injection liner for
improved vaporization providing 10times the reproducibility
The injection liners from Thermo are highlydeactivated, and produced to exacting toler-ances to ensure the high level of reproducibilityrequired in today’s separation laboratory. Afull range of liners is available for Thermoand other manufacturers’ instruments.
Thermo FocusLiner GC Injection LinerThe Thermo FocusLiner Injection liners contain a quartz wool filter that improves therate of vaporization, reducing the discrimina-tion of high boiling analytes in the sample. It also prevents non-volatile components fromentering the column, improving sensitivityand extending column lifetimes. The positionof this quartz wool is critical to obtain these
improvements. The FocusLiner secures the quartz wool between two restrictionspreventing movement during syringe needleinjection. The quartz wool consistently wipesthe dispensed liquid away from the end of
the syringe needle during the injectionprocess, resulting in less carryover andgreatly improved precision. With these liners, a Relative Standard Deviation (RSD)of less than 1% can be achieved.Please also see septa on page 154.
Accessories
All brands and products are trademarks of their respective companies. 149
Other LinersInstrument I.D. x O.D. x Length (mm) Quantity of 5 Quantity of 25
Agilent™ 4.0 x 6.3 x 78.5 453A1255 453A1252
Agilent 2.3 x 6.3 x 78.5 453A1285 453A2282
Agilent 2.3 x 6.3 x 78.5 453A2375 453A1372
Agilent 4.0 x 6.3 x 78.5 453A1925
Agilent 4.0 x 6.3 x 78.5 453A2265 453A1262
Agilent 4.0 x 6.3 x 78.5 453A1345 453A2342
Agilent 4.0 x 6.3 x 78.5 453A1305 453A2302
Agilent 4.0 x 6.3 x 78.5 453A1355 453A2352
Agilent 4.0 x 6.3 x 78.5 453A1315 453A1312
Agilent 4.0 x 6.3 x 78.5 453A1295 453A2292
Agilent 1.2 x 6.3 x 78.5 453A1335 453A2332
Agilent 2.0 x 6.1 x 78.5 453A2275
Agilent 2.0 x 6.3 x 78.5 453A2325
Varian™ 1078/1079 0.75 x 5 x 54 453V2995
Varian 1078/1079 2 x 5 x 54 453V2545
Varian 1078/1079 3.4 x 5 x 54 453V1535
Varian 1078/1079 0.5 x 5 x 54 453V2885
Varian 1078/1079 3.4 x 5 x 54 453V1515
Varian 1078/1079 3.4 x 5 x 54 453V2525
Shimadzu™ 2010 3.4 x 5 x 95 453S2985
Shimadzu 2010 3.4 x 5 x 95 453S2615
Shimadzu 2010 2.6 x 5 x 95 453S1645
Shimadzu 17A 3.4 x 5 x 95 453S1605
Shimadzu 17A 3.4 x 5 x 95 453S1625
Shimadzu 17A 3.4 x 5 x 95 453S2595
Shimadzu 17A 3.4 x 5 x 95 453S2615
Note: Liners not drawn to scale.
GC Accessories
All brands and products are trademarks of their respective companies.150
Other LinersInstrument I.D. x O.D. x Length (mm) Quantity of 5
Shimadzu 17A 3.4 x 5 x 95 453S2635
Shimadzu 17A 2.6 x 5 x 95 453S1645
Shimadzu 17A 0.75 x 5 x 95 453S1665
PE™ Clarus™ 2 x 4 x 86.2 453P1795
PE Clarus 4 x 6.2 x 92 453P1755
PE Clarus 4 x 6.2 x 92 453P2765
PE Clarus 4 x 6.2 x 92 453P2785
PE Clarus 2 x 6.2 x 92 453P2805
PE Clarus 2 x 4 x 86.2 453P1775
PE Clarus 3 x 6 x 112 453P1815
Note: Liners not drawn to scale.
Ordering Information
Liner Sealing Rings Instrument Liner Material Quantity Part Number
Thermo 8 mm O.D. liners Graphite Ring 10 29033406
Agilent™ 453A1335, 453A1355, 453A2332, 453A2352 Graphite Ring 10 290GA242
Agilent 453A2265, 453A1255, 453A1315, 453A1285, 453A1295, 453A2282, 453A1305, Graphite Ring 10 290GA243453A1312, 453A2325, 453A1345, 453A2375, 453A1372, 453A1252, 453A1262, 453A2292, 453A2302, 453A2342
Agilent 453A2275 Graphite Ring 10 290GA244
Agilent All above Agilent liners Viton™ O-Ring 10 290OA241
PerkinElmer™ 453P1755, 453P2765, 453P2785, 453P2805, 453P1815 Viton O-Ring 10 290OP245
Shimadzu 2010 453S2985 Viton O-Ring 10 290OS246
Shimadzu 17A All 17A liners Graphite Ring 10 290GS247
Varian™ 1078/1079 All liners Graphite Ring 10 290GV248
Accessories
All brands and products are trademarks of their respective companies. 151
FerrulesWide range of choices for a wide range of instruments and applications
Ferrules from Thermo are available in threedifferent materials and various dimensionsto match the instrument and capillary columnID. The choice of material is dependent uponthe use; guidelines are given in the table.
100% Graphite FerrulesThermo’s 100%graphite ferrules area soft material thatis porous to oxygen,making them suitablefor most applications
except GC/MS. These easy-to-use ferrulesform a soft grip with the column and providea stable seal.
15% Graphite/85% Vespel FerrulesThe mechanicallyrobust 15%Graphite /85%Vespel ferrules havea long lifetime andare compatible with
GC/MS. These ferrules form a strong gripwith the column and cannot be reused asthey form a permanent seal with the column.They have a temperature limit of 350 °C, but must be re-tightened after initial temperature cycles.
SilTite Metal FerrulesSilTite™ metal ferrulesand nuts are madefrom the same material and havethe same thermalexpansion coefficient.
The SilTite ferrule forms a strong, permanent,airtight seal around the capillary column,eliminating leaks. The base of the ferrule isflat and forms a perfect seal with the MSinterface. The ferrule’s temperature toleranceis well above the limit of the injector, MSinterface or GC oven. Unlike other ferrules,SilTite Ferrules do not need re-tighteningafter installation.Please also see syringes on page 158.
Ordering Information
Thermo InstrumentsDescription Uses Ferrule Size (Column ID) Quantity Part Number
15% Graphite/85% Vespel Ferrules TRACE™ Cold On-Column Injectors 0.1 – 0.25 mm 10 29033461
0.32 mm 10 29033460
0.53 mm 10 29033471
Packed Column 1/8" OD 10 290VT168
Packed Column 1/4" OD 10 290VT165
TRACE and FOCUS™ Injectors 0.1 – 0.25 mm 10* 290VT186
0.32 mm 10* 290VT187
0.53 mm 10* 290VT188
Brass Nut 2 290BT239
GC/MS Interface 0.1 – 0.25 mm 10 29033496
0.32 mm 10 29033497
100% Graphite Ferrules Injectors & Detectors at 0.1 – 0.25 mm 10 29053488†
Atmospheric Pressure (Not for GC/MS) 0.32 mm 10 29053487†
0.53 mm 10 29053486†
SilTite Kit GC/MS Interface 0.1 – 0.25 mm 1** 290MT229
0.32 mm 1** 290MT230
0.53 mm 1** 290MT231
Replacement SilTite Ferrules 0.1 – 0.25 mm 10 290MT221
0.32 mm 10 290MT222
0.53 mm 10 290MT223
Replacement SilTite Nuts 5 290MT211
* Must be used in conjunction with brass nut PN 290BT239** Kit contains 2 SilTite nuts and 10 ferrules† Equivalent to PN 29013488, 29013487 & 29013486 previously sold in quantities of two
Material Type Suitable for GC/MS Temp Limit (°C) Re-usable
Graphite No 450 Yes
Graphite/Vespel™ Yes 350 No
Stainless Steel (SilTite™) Yes 500 No
All varieties of ferrules are supplied in contaminant-free, individual blister packs, allowingremoval of an individual item without risk of contamination to the other supplied items.
GC Accessories
All brands and products are trademarks of their respective companies.152
Agilent™ 5890, 6890 and 6850 InstrumentsDescription Uses Ferrule Size (Column ID) Quantity Part Number
15% Graphite/85% Vespel™ Ferrules Injectors and Detectors 0.1 – 0.25 mm 10 290VA191
0.32 mm 10 290VA192
0.53 mm 10 290VA193
Packed Column 1/8" OD 10 290VT168
Packed Column 1/4" OD 10 290VT165
GC/MS Interface 0.1 – 0.25 mm 10 29033496
0.32 mm 10 29033497
0.53 mm 10 290VP144
100% Graphite Ferrules Injectors and Detectors at 0.1 – 0.32 mm 10 290GA139Atmospheric Pressure (Not for GC/MS) 0.45 – 0.53 mm 10 290GA140
Packed Column 1/8" OD 10 290GA108
Packed Column 1/4" OD 10 290GA107
SilTite™ Kits GC/MS Interface 0.1 – 0.25 mm 1* 290MA194
0.32 mm 1* 290MA195
0.53 mm 1* 290MA196
Split Splitless Injectors 0.1 – 0.25 mm 1** 290MA215
0.32 mm 1** 290MA216
0.53 mm 1** 290MA217
Replacement SilTite Ferrules For all SilTite Connectors 0.1 – 0.25 mm 10 290MA201
0.32 mm 10 290MA202
0.53 mm 10 290MA203
SilTite Nuts GC/MS Interface 5 290MA205
Split Splitless Injectors 5 290MA207
Replacement Baseplate Seals 2 290MA227
10 290MA228
* Kits contain 2 nuts and 10 ferrules** Contains 2 nuts, 10 ferrules and 2 base seals
Varian InstrumentsDescription Uses Ferrule Size (Column ID) Quantity Part Number
15% Graphite/85% Vespel Injectors and Detectors 0.1 – 0.25 mm 10 29033496
0.32 mm 10 29033497
0.53 mm 10 290VP144
Packed Column 1/4" OD 10 290VT165
Packed Column 1/8" OD 10 290VT168
100% Graphite Injectors and Detectors at 0.1 – 0.32 mm 10 290GP132Atmospheric Pressure (Not for GC/MS) 0.45 – 0.53 mm 10 290GP131
Packed Column 1/8" OD 10 290GT128
Packed Column 1/4" OD 10 29033405
SilTite Kit For GC/MS Interface 0.1 – 0.25 mm 1* 290MV218
0.32 mm 1* 290MV219
0.53 mm 1* 290MV220
Replacement SilTite Ferrules 0.1 – 0.25 mm 10 290MA201
0.32 mm 10 290MA202
0.53 mm 10 290MA203
Replacement SilTite Nuts 5 290MV212
* Kit contains 2 SilTite nuts and 10 ferrules
Accessories
All brands and products are trademarks of their respective companies. 153
Shimadzu™ InstrumentsDescription Uses Ferrule Size (Column ID) Quantity Part Number
15% Graphite/85% Vespel™ QP5000-1 GC/MS 0.1 – 0.25 mm 10 290VS1480.32 mm 10 290VS149
QP5000-11 GC/MS 0.1 – 0.25 mm 10 290VS1460.32 mm 10 290VS147
2010 Injector & GC/MS connection 0.1 – 0.25 mm 10 290334960.32 mm 10 290334970.53 mm 10 290VP144
100% Graphite Injectors & Detectors at 0.1 – 0.32 mm 10 290GS115Atmospheric Pressure (Not for GC/MS ) 0.45 – 0.53 mm 10 290GS116
5 mm OD Packed Columns 10 290GS1012010 Injector 0.1 – .032 mm 10 290GA139
0.45 – 0.53 mm 10 290GA140SilTite™ Kit Shimadzu Direct GC/MS Interface 0.1 – 0.25 mm 1* 290MS198
(check interface is tapered) 0.32 mm 1* 290MS1990.53 mm 1* 290MS200
Jet Separator & 2010 0.1 – 0.25 mm 1* 290MA1940.32 mm 1* 290MA1950.53 mm 1* 290MA196
All injectors except 2010 0.1 – 0.25 mm 1* 290MS2240.32 mm 1* 290MS2250.53 mm 1* 290MS226
Replacement SilTite Ferrules Shimadzu Direct GC/MS Interface 0.1 – 0.25 mm 10 290MS208(check interface is tapered) 0.32 mm 10 290MS209
0.53 mm 10 290MS210Replacement Nuts 5 290MS214
Shimadzu Jet Separator GC/MS Interface, 0.1 – 0.25 mm 10 290MA2012010/MS GC/MS Interface and Injector. 0.32 mm 10 290MA202(check interface is flat) 0.53 mm 10 290MA203
Replacement Nuts 5 290MA205All injectors except 2010 0.1 – 0.25 mm 10 290MA201
0.32 mm 10 290MS2090.53 mm 10 290MS210Replacement Nuts 5 290MU240
* Kit contains 2 SilTite nuts and 10 ferrules
PerkinElmer™ InstrumentsDescription Uses Ferrule Size (Column ID) Quantity Part Number
15% Graphite/85% Vespel Injectors and Detectors 0.1 – 0.2 5 mm (1/16" Nut) 10 290334960.32 mm (1/16" Nut) 10 290334970.53 mm (1/16" Nut) 10 290VP1440.1 – 0.25 mm (1/8" Nut) 10 290VP1730.32 mm (1/8" Nut) 10 290VP1720.53 mm (1/8" Nut) 10 290VP174
100% Graphite Injectors and Detectors at 0.1 – 0.32 mm (1/16" Nut) 10 290GP132Atmospheric Pressure (Not for GC/MS) 0.45 – 0.53 mm (1/16" Nut) 10 290GP131
0.1 – 0.32 mm (1/8" Nut) 10 290GP1300.45 – 0.53 mm (1/8" Nut) 10 290GP135Packed Column 1/8" OD 10 290GT128Packed Column 1/4" OD 10 29033405
SilTite Kit GC/MS Interface 0.1 – 0.25 mm 1* 290MA1940.32 mm 1* 290MA1950.53 mm 1* 290MA196
Replacement Ferrules 0.1 – 0.25 mm 10 290MA2010.32 mm 10 290MA2020.53 mm 10 290MA203
SilTite Nuts 5 290MA205
* Kit contains 2 SilTite nuts and 10 ferrules
GC Accessories
All brands and products are trademarks of their respective companies.154
SeptaWide range of septa to cover most applications
• Variety of materials and temperaturelimits for all applications
• For use with Thermo TRACE™ and FOCUS™ GCs and instruments from other manufacturers
Septa are an important part of the GC instru-ment and require durability, resealability andlow bleed for optimal performance of yourinstrument. Septa from Thermo are availablein several types of materials that fit in Thermoand other manufacturers’ instruments.
All septa are supplied in contaminant-free,individual blister packs, allowing removal ofan individual item without risk of contamina-tion to the other supplied items.
Septa Materials CharacteristicsSepta Type Description Temperature Limit (°C)
TCS Triple layer with Teflon™ 280
CS Silicone with Teflon 200
Auto-Sep™ High Grade Silicone 320
Auto-Sep T™ High Grade Silicone with Teflon 350
BTO™ Low Bleed Silicone 400
Ordering InformationSepta Materials Diameter (mm) Quantity Part Number
BTO 17 50 31303211
BTO 11 50 31303230
BTO 9 50 31303240
BTO 12.7 50 31313228
CS 5 50 313C500A
CS 9.5 50 313C950M
CS 11 50 313C110M
CS 12.5 50 313C125A
TCS 9.5 50 313T950M
TCS 11 50 313T110M
TCS 12.5 50 313T125A
TCS 17 50 313T170T
Auto-Sep 9.5 25 313A950M
Auto-Sep 11 25 313A110V
Auto-Sep T 9.5 25 313S950M
Auto-Sep T 9.5 100 313S959M
Auto-Sep T 11 25 313S110M
Auto-Sep T 11 100 313S119M
Auto-Sep T 12.5 25 313S125A
Auto-Sep T 17 25 313A170T
Enduro™ Shimadzu™ plug 50 313B201S
Accessories
All brands and products are trademarks of their respective companies. 155
General GC ToolsAdditional quality GC accessories
Thermo offers a variety of tools for use in any labwith a GC, from forceps to a complete kit of commonlyused items. Using a rotationdiamond scribe, the Shortix™
Capillary cutter gives a farsuperior column end than aceramic or pen type cutter.This leads to better seals in column joints, leading to less leakage and morereproducible results.Please also see gas filters on page 145-146.
Ordering InformationDescription Part Number
Straight tipped forceps 60180-770
Angle tipped forceps 60180-771
Pin vice for drilling holes in ferrules 60180-772
Magnifying glass 60180-773
Probes 60180-774
Inspection mirror 60180-775
Needle file 60180-776
Pick-up tool 60180-777
Ceramic column cutter 60201-318
Shortix capillary column cutter 60180-835
Shortix cutter repair kit 60180-836
Adjustable wrench 60180-782
0.35 mm drill bit 60180-779
0.45 mm drill bit 60180-780
0.70 mm drill bit 60180-781
Shortix column cutter
Left Shortix cut, right wafer cut
HPLC SyringesEasy and reproducible manual injection
• Square tip to prevent damage to injector• Wide range of volumes and styles• Accurate and reproducible
The range of Thermo syringes covers a widerange of volumes for manual injection. Thesyringes are precision made from borosilicateglass and stainless steel. The range of PTFEtipped syringes is ideal for dirty samples asthe sample is cleaned more completely fromthe barrel with every injection. Long lifetimesare provided by the robust design and the
easy-to-read markings make reproduciblemanual injection far easier.
The range of autosampler syringes hasbeen tested on a range of Thermo instrumentsto ensure the accuracy and reliability of performance over long analysis sequences.
For accuracy and reproducibility informa-tion please see page 158.
Syringes
All brands and products are trademarks of their respective companies.156
Ordering Information
Standard Fixed Needle for Rheodyne™/Valco™
Volume Gauge Needle Quantity Part Number
5 µL 22 2" FN 1 365CL221
10 µL 22 2" FN 1 365DL231
25 µL 22 2" FN 1 365FL241
50 µL 22 2" FN 1 365GL251
100 µL 22 2" FN 1 365HL261
250 µL 22 2" FN 1 365IL271
500 µL 22 2" FN 1 365JL281
Standard PTFE Tipped Removable Needle HPLC SyringesVolume Needle Gauge Quantity SGE™ Equivalent Hamilton™ Equivalent Part Number
10 µL 2" 22 1 002313 80065 365DLG21
25 µL 2" 22 1 003312 80265 365FLG31
50 µL 2" 22 1 004312 80965 365GLG41
100 µL 2" 22 1 005312 81065 365HLG51
250 µL 2" 22 1 006312 81165 365ILG61
500 µL 2" 22 1 007312 81265 365JLG71
Replacement Needles for HPLC Syringes Syringe Part Number Needle Length Gauge Quantity Part Number
For 365DLG21 2" 22 5 365RNL15
For all other PTFE tipped syringes (25-500 µL) 2" 22 5 365RNL25
Male Luer-LOK™ Priming Syringes Volume Quantity SGE Equivalent Hamilton Equivalent Part Number
1 mL 1 008025 81320 365KL531
2.5 mL 1 008425 81420 365LL541
5 mL 1 008762 81520 365ML551
10 mL 1 008962 81620 365NL561
25 mL 1 009463 82520 365PL571
50 mL 1 009660 85020 365RL581
Accessories
All brands and products are trademarks of their respective companies. 157
Needles for Luer-LOK™ Priming SyringesSyringe Part Number Gauge Needle Quantity Part Number
All 22 2" 2 365RNL22
Syringes for Thermo HPLC InstrumentsThermo Instrument
LCQ™ AS1000 AS3000 AS3500 Volume Gauge Needle Quantity Part Number Part Number
X 250 µL 22 2" RN 1 00301-19015 365ILT21
X 500 µL 22 2" RN 1 00301-19016 365JLT41
X X 500 µL 1 A3588-010 365JLT61
X X 2.5 mL – – 1 A3587-020 365LLT81
X X 250 µL – – 1 A3588-020 365ILT91
Thermo Mass Spectrometry Replacement ESI Probe NeedlesThermo Instrument
Thermo Instrument Quantity Part Number Part Number
For LCQ™ XP, DECA™, Advantage™ 1 00950-00990 365RNLT1
For LCQ MS 1 00950-00951 365RNLT2
For LCQ XSQ 1 00950-00975 365RNLT3
Syringes
All brands and products are trademarks of their respective companies.158
GC SyringesImproved designs for a range of instruments
• Accurate and reproducible over arange of volumes
• Manual and autosampler varieties• Range of needle tips• Robustness from improved design
The accuracy and precision of the GC samplesyringe is critical to your GC results. Thermo’ssyringes are designed, manufactured andinspected to ensure the expected volume is transferred every time. Our syringes aremade by chromatographers who are familiarwith the requirements of the entire GC system, not just syringe manufacturing.
All Thermo syringes use borosilicateglass with metal flanges of either stainlesssteel or nickel-plated brass. Your syringechoices include fixed and removable needlesas well as standard and gas-tight plungersfor convenience. The needles and plungersare stainless steel; gas-tight plunger tips arePTFE. The table summarizes the specificationsof all available syringes.
Autosampler SyringesThermo is the source for all your GCautosampler syringes, no matter what GCyou use. Thermo offers a wide variety ofneedle tips including cone point which canhelp prevent the plunger binding with dirtysamples. The field proven syringe designsare optimized for septum piercing, and comein a range of volumes.
Manual SyringesThermo manual syringes come in industrystandard sizes, ensuring you of a consistentfit with your GC. The white scale backingmakes markings easy-to-read, improvingreproducibility, and the markings are resistantto solvents. Syringe volumes range from 0.5 µLto 1.0 mL, covering most sample take up anddelivery requirements.For syringe accessories and replacement parts, see page 161.
Syringe Specifications (Autosampler and Manual)
Temperature Limits 5 – 115 °C for removable needle syringes;
5 – 70 °C for fixed needle syringes
Volume Reproducibility (displaced) ±1% (±2% for plunger-in-needle syringes)
Volume Accuracy ±1% (±2% for plunger-in-needle syringes)
Maximum Safe Working Pressure 5 µL to 100 µL – 1000 psi
250 µL and 500 µL – 500 psi
1 mL to 5 mL – 400 psi
10 mL – 200 psi
25 mL, 50 mL and 100 mL – 100 psi
Maximum Functional Pressure 100 psi
Accessories
All brands and products are trademarks of their respective companies. 159
Ordering Information
Autosampler Syringes for Thermo InstrumentsNeedle Thermo Instrument
Volume Needle Type Length (mm) Gauge Tip Style Quantity TriPlus™ AS3000 AS2000 AS200/AS800 Notes Part Number
0.5 µL Plunger-in-Needle 50 23 Cone 1 X X Split/PTV 365040450.5 µL Plunger-in-Needle 75 31 Cone 1 Manual OC 365005000.5 µL Plunger-in-Needle 80 26 Cone 1 X Splitless & OC 365040465.0 µL Fixed Needle 50 26 Cone 1 X Split/PTV 365040475.0 µL Fixed Needle 50 23 Cone 1 X X X 365C37015.0 µL Fixed Needle 50 26 Cone 1 X X Split/PTV 365005055.0 µl Removable Needle 75 31 Cone 1 Manual OC 365005105.0µL Fixed Needle 80 26 Cone 1 X Splitless & OC 3650202510 µL Removable Needle 42 23 Cone 1 X 365D161110 µL Fixed Needle 50 26 Cone 1 X X X 365D371110 µL Fixed Needle 50 26 Cone 6 X X X 365D185610 µL Fixed Needle 50 25 Cone 1 X X X X Split/PTV 3650052510 µL Fixed Needle 50 23 Cone 1 X X X X PTV/SSL Split 3652006010 µL Removable Needle 50 26 Cone 1 X X 365D184110 µL Removable Needle 50 23 Cone 1 X X X 365D373110 µL Fixed Needle 80 23 Cone 1 X X Merlin Valve SSL Splitless 3652006110 µL Fixed Needle 50 23 - 26 Cone 1 X X OC in PTV Merlin Valve 3650058010 µL Fixed Needle, Gas Tight 50 23 Cone 1 X 365D374110 µL Fixed Needle 80 26 Cone 1 X X OC & Splitless 3650201910 µL Removable Needle, Gas Tight 75 31 Cone 1 Manual OC 3650052050 µL Removable Needle, Gas Tight 50 25 Bevel 1 X 365G216150 µL Removable Needle 50 23 Cone 1 X LV Splitless 36503015100 µL Removable Needle 50 25 Bevel 1 X 365H2301100 µL Removable Needle, Gas Tight 50 23 Side Hole 1 X X 36520050100 µL Removable Needle, Gas Tight 50 25 Bevel 1 X See note 1 365H2381100 µL Removable Needle, Gas Tight 50 23 Cone 1 X X X LV Splitless 36500495250 µL Removable Needle, Gas Tight 50 25 Bevel 1 X 365I2561250 µL Removable Needle, Gas Tight 50 25 Bevel 1 X 365I2611250 µL Removable Needle, Gas Tight 80 26 Cone 1 X X LVOC 36500490250 µL Removable Needle, Gas Tight 50 23 Side Hole 1 X X X See note 1 36520051500 µL Removable Needle 50 23 Side Hole 1 X PTV-LVI 365200551.0 mL Removable Needle, Gas Tight 50 23 Bevel 1 X 365K3041
1. Specific syringe to be used when performing PTV/LVI injections with dedicated liner for thermo labile compounds (p/n 45352060). Compatible with Merlin Microseal ™ device installedon BEST PTV and with AS2000 and TriPlus™ autosamplers for liquids.
Autosampler Syringes for Other InstrumentsInstrument Manufacturer Volume Needle Type Length (mm) Gauge Tip Style Quantity Part Number
Agilent™ 0.5 µL Removable Needle 42 26 Cone 1 365A04110.5 µL Removable Needle 42 23 Cone 1 365A04210.5 µL Removable Needle 42 23 – 26 Cone 1 365A0431
5 µL Fixed Needle 42 26 Cone 1 365C09215 µL Fixed Needle 42 26 Cone 6 365C09265 µL Fixed Needle 42 23 Cone 1 365C09515 µL Fixed Needle 42 23 Cone 6 365C09565 µL Fixed Needle 42 23 – 26 Cone 1 365C09715 µL Fixed Needle 42 23 – 26 Cone 6 365C0976
10 µL Fixed Needle 42 26 Cone 1 365D152110 µL Fixed Needle 42 26 Cone 6 365D152610 µL Fixed Needle, Gas Tight 42 23 – 26 Cone 1 365D156110 µL Fixed Needle 42 23 Cone 1 365D157110 µL Fixed Needle 42 23 Cone 6 365D157610 µL Removable Needle, Gas Tight 42 23 Cone 1 365D161110 µL Fixed Needle 42 23 – 26 Cone 1 365D162110 µL Fixed Needle 42 23 – 26 Cone 6 365D1636
Syringes
All brands and products are trademarks of their respective companies.160
Autosampler Syringes for Other InstrumentsInstrument Manufacturer Volume Needle Type Length (mm) Gauge Tip Style Quantity Part Number
PerkinElmer™ 0.5 µL Removable Needle 70 26 Cone 1 365A0471
0.5 µL Removable Needle 70 23 Cone 1 365A0481
5 µL Fixed Needle 70 26 Cone 1 365C1011
5 µL Fixed Needle 70 23 Cone 1 365C1021
5 µL Fixed Needle, Gas Tight 70 26 Cone 1 365C1031
5 µL Fixed Needle, Gas Tight 70 23 Cone 1 365C1041
Shimadzu™ 10 µL Removable Needle 42 26 Cone 1 365D1771
10 µL Removable Needle 42 23 Cone 1 365D1781
10 µL Removable Needle, Gas Tight 42 23 Cone 1 365D1791
Varian™ 10 µL Removable Needle 53 25 Side Hole 1 365D1811
10 µL Fixed Needle 50 26 Bevel 1 365D1831
Manual SyringesVolume Needle Type Needle Length (mm) Gauge Tip Style Quantity Part Number
0.5 µL Plunger-in-Needle 50 23 Cone 1 365A0331
1.0 µL Plunger-in-Needle 50 23 Cone 1 365B0511
1.0 µL Plunger-in-Needle 70 23 Cone 1 365B0531
5.0 µL Fixed Needle 50 26 Bevel 1 365C0741
5.0 µL Removable Needle 50 26 Bevel 1 365C0761
10 µL Fixed Needle 50 26 Bevel 1 365D1091
10 µL Fixed Needle 50 26 Bevel 6 365D1096
10 µL Removable Needle 50 26 Bevel 1 365D1171
25 µL Fixed Needle 50 25 Bevel 1 365F1891
25 µL Removable Needle 50 25 Bevel 1 365F1901
25 µL Fixed Needle, Gas Tight 50 25 Bevel 1 365F1921
25 µL Removable Needle, Gas Tight 70 25 Bevel 1 365F1931
50 µL Fixed Needle 50 25 Bevel 1 365G2081
50 µL Removable Needle 50 25 Bevel 1 365G2091
50 µL Fixed Needle, Gas Tight 50 25 Bevel 1 365G2111
50 µL Removable Needle, Gas Tight 50 25 Bevel 1 365G2161
100 µL Fixed Needle 50 25 Bevel 1 365H2291
100 µL Removable Needle 50 25 Bevel 1 365H2301
100 µL Fixed Needle, Gas Tight 50 25 Bevel 1 365H2321
100 µL Removable Needle, Gas Tight 50 25 Bevel 1 365H2381
250 µL Fixed Needle 50 25 Bevel 1 365I2541
250 µL Fixed Needle, Gas Tight 50 25 Bevel 1 365I2561
250 µL Removable Needle, Gas Tight 50 25 Bevel 1 365I2611
500 µL Fixed Needle, Gas Tight 50 25 Bevel 1 365J2831
500 µL Removable Needle, Gas Tight 50 25 Bevel 1 365J2881
1.0 mL Removable Needle, Gas Tight 50 23 Bevel 1 365K3041
1.0 mL Fixed Needle, Gas Tight 50 22 Bevel 1 365K3051
Accessories
All brands and products are trademarks of their respective companies. 161
GC Syringe Accessories
To increase the life of your Thermo syringes,Thermo carries a line of replacement needles,plungers, and repair kits.
Ordering Information
Replacement NeedlesFor Syringe Part Number Quantity Part Number
365D1611 2 365RN252
365D1841 2 365RN362
365D1771 2 365RN272
365D3731 2 365RN372
365H2301, 365F1931, 365G2161, 365H2381, 5 365RN225365I2611, 365F1901, 365G2091, 365J2881
365K3041 5 365RN235
36500495, 36503015 5 36566485
36500490, 5 36566480
36520050, 36520051, 36520055 2 36550040
365D1811 1 365RN351
365C0761 5 365RN555
365D1171 5 365RN215
365D1781, 365D1791 2 365RN282
36500510 2 36550045
36500520 2 36550046
Replacement PlungersFor Syringe Part Number Quantity Part Number
365F1921, 365F1931 1 365RP421
365G2111, 365G2161 1 365RP451
365H2321, 365H2381 1 365RP461
365I2561, 365I2611 1 365RP481
365J2831, 365J2881 1 365RP491
365K3041, 365K3051 1 365RP511
365D1811 1 365RP441
365D1561 2 365RP392
365C1041 2 365RP382
365D1791 2 365RP522
365D3741 2 365RP532
365D1611 2 365RP412
365H3771 1 365RP471
36500500 1 365RK351
Replacement seal for all 0.5 µL syringes 1 365RK561
Replacement seal for all 1 µL syringes 1 365RK563
Repair KitsFor Syringe Part Number Quantity Part Number
365A0411 1 365RK541
365A0421 1 365RK241
365A0431 1 365RK261
365A0471 1 365RK291
365A0481 1 365RK331
365A0331 1 365RK321
365B0511 1 365RK311
365B0531 1 365RK341
Vials
All brands and products are trademarks of their respective companies.162
Thermo VialsCompatible with a wide range of HPLC and GC instruments
• Convenient clam shell packs include 100 vials and caps
• Vials and capsalso available separately
• Head space vialsalso available
Thermo provides a range of vials tested on our GC and LC instruments; they are alsocompatible with many other manufacturers’instruments such as Agilent™, PerkinElmer™ andVarian™. Made from highly pure borosilicateglass, the vials meet the high standardsrequired by such bodies as the US andEuropean Pharmacopoeia, and ASTM for hydrolytic extraction.
Ordering Information
Vial Combination PacksDimensions Instrument Compatibility
Cap Type Vial Type (mm x mm) Quantity (please refer to reference table) Part Number
Blue cap with blue silicone/ 2.0 mL crimp top vial, 12 x 32 100 2,6 60180-597red PTFE seal clear borosilicate glass 33
Cap with white silicone/ 2.0 mL crimp top vial, 12 x 32 100 2,6 60180-598red PTFE seal clear borosilicate glass 33
9 mm screw cap (blue) 2.0 mL screw top vial, 12 x 32 100 1,6 60180-599prefitted silicone/PTFE seal clear borosilicate glass 33
8 mm screw cap (black) with 2.0 mL screw top vial, 12 x 32 100 7,8 60180-600silicone/PTFE seal clear borosilicate glass 33
Autosampler VialsDimensions Instrument Compatibility
Description (mm x mm) Quantity (please refer to reference table) Part Number
Crimp top vial, 1 mL, 8 mm finish 8 x 40 125 2,6 60180-500Requires 8 mm aluminum caps and seals (60180-525) and plastic reducer (60180-524)
Crimp top vial, 1.2 mL, 8 mm finish 8 x 40 125 2,6 60180-501Requires 8 mm aluminum caps and seals (60180-525) and plastic reducer (60180-524)
Crimp top vial, 2 mL, 11 mm finish 12 x 32 100 2,6,8 60180-502Requires 11 mm aluminum caps and seals (60180-526) and spacers (60180-523)*
Crimp top vial, 10 mL, 20 mm finish 22 x 45 125 2,3,4,5,6 60180-504Requires 20 mm aluminum caps and seals (60180-513 or 60180-511)
Crimp top amber vial, 10 mL, 20 mm finish 22 x 45 125 2,3,4,5,6 60180-505Requires 20 mm aluminum caps and seals (60180-513 or 60180-511)
Crimp top vial, 20 mL, 20 mm finish 22 x 75 125 3,4,5 60180-506Requires 20 mm aluminum caps and seals (60180-513 or 60180-511)
300 µL micro-volume sampling vial 12 x 32 100 1,8 60180-507Requires screw top cap with septa (60180-516)
Screw top vial, 2 mL, 8 mm finish, clear glass 12 x 32 100 2,6,7,8 60180-508Requires 8 mm plastic screw caps (60180-514), Teflon faced seals (60180-515) and plastic spacers (60180-523)*
Screw top vial, 2 mL, clear glass 12 x 32 100 1,6,7,8 60180-509Requires screw top cap with septa (60180-516)
Solvent vial, 4 mL 15 x 46 125 1 60180-510Requires screw top cap with septa (60180-516)
Screw top vial, 2 mL, 8 mm finish, amber glass 12 x 32 100 2,6,7,8 60180-560Requires 8 mm plastic screw caps (60180-514), Teflon™ faced seals (60180-515) and plastic spacers (60180-523)*
Screw top vial, 2 mL, amber glass 12 x 32 100 1,6,7,8 60180-561Requires screw top cap with septa (60180-516)
Crimp top vial, 2.5 mL, 11 mm finish. Requires 11 mm aluminumCaps and Seals (60180-526) and Spacers (60180-523)* 12 x 32 100 2,6 60180-503
*Spacers compatible with the AS800/AS2000.
Thermo Instrument CompatibilityThermo Instrument Description
1 AI/AS3000
2 AS800/AS2000
3 HS800
4 HS850/HS2000
5 Triplus™ HS
6 Triplus AS
7 SpectraSYSTEM™
8 Surveyor™/Surveyor Plus™
Accessories
All brands and products are trademarks of their respective companies. 163
Ordering Information
Caps and SeptaDescription Quantity Part Number
Aluminum crimp cap with silicone/PTFE seal 100 60180-511
Aluminum crimp cap with chlorobutyl/PTFE seal 100 60180-513
Plastic screw caps, 8 mm 100 60180-514
8 mm seal, red PTFE/white silicone 100 60180-562
8 mm seal, blue silicone/PTFE 500 60180-515
Screw top caps for 2 mL, 4 mL and 300 mL vials complete with septa 100 60180-516
Plastic spacer for 2 mL screw top vials (compatible with AS800/AS2000) 100 60180-523
Plastic reducer for 1 and 1.2 mL vials (compatible with TriPlus AS) 10 60180-524
Aluminum caps, 8 mm with Teflon faced septa 100 60180-525
Aluminum crimp cap, 11 mm with Teflon™ faced septa 100 60180-526
9 mm magnetic cover and screw cap, prefitted with a soft silicone/PTFE seal 100 60180-517
Blank cap, tin plate, magnetic 100 60180-518
Composite blue magnetic cap, for 20 mm crimp top vials 100 60180-519
Composite blue magnetic cap with blue chlorobutyl/PTFE seal, for 20 mm crimp top vials 100 60180-520
Blue silicone/PTFE seal, for 20 mm crimp top vials 100 60180-521
Red silicone/PTFE seal, for 20 mm crimp top vials 100 60180-522
Other vials and caps are also available. Please call customer service for more information.
CrimpersDescription North America United Kingdom Europe Japan
Electronic Crimper, 11 mm 60180-527 60180-528 60180-529 60180-530
Electronic Crimper, 20 mm 60180-531 60180-532 60180-533 60180-534
Decappers Description North America United Kingdom Europe Japan
Electronic Decapper, 11 mm 60180-535 60180-536 60180-537 60180-538
Electronic Decapper, 20 mm 60180-539 60180-540 60180-541 60180-542