accusetup suite medium scanner module programming manual

8/10/2019 AccuSetup Suite Medium Scanner Module Programming Manual

1/196

AccuSetup SuiteMedium Scanner Module

PROGRAMMING MANUAL

MANASISTPWM4.1(1000017487)

Release Date: 10/00


2/196


3/196

I

INTRODUCTION

Please read this manual before using your Accu-Sort product and retain this

document for future reference.

MANUAL REVISIONS

This Software Manual is under revision control. Any addenda or other documentsassociated with this manual are under separate revision controls. A revisionnumber is changed by 0.1 whenever technical information is changed or added toa document. Any revision less than 1.0 is automatically considered preliminary.Any document with a revision number of 1.0 or greater has been officiallyreleased by the Accu-Sort Systems ECN process. The document revision historycan be found in the Revision History section at the end of this manual.

DISCLAIMER

No part of this document is to be reproduced or utilized in any form or by anymeans, electronic or mechanical, including photocopying, recording, or by aninformation storage and retrieval system without the written consent of Accu-Sort Systems, inc. All drawings and specifications contained in this manual arethe property of Accu-Sort Systems, inc. and shall not be reproduced, copied orused in whole or in part as the basis for the sale or manufacture of deviceswithout written permission.

Copyright2000 Accu-Sort Systems, inc.

All Rights Reserved

This is revision 4.1 of the software manual for 3.2 of Software.Microsoft, Windowsand WIndows NTare registered trademarks of Microsoft Corporation


4/196

II

SOFTWARE LICENSING AND WARRANTYINFORMATION

USE OF SOFTWARE AGREEMENT

You have received, along with your Accu-Sort product, a copy of Accu-Setup.

This software is available for use on as many PCs as you require. You may havereceived a copy of Accu-Setup that can be used with your network and can bemade available to all network users. Or, you may have received a single userversion of Accu-Setup. Feel free to have this software in use by as many users asnecessary or copy this program to as many PCs as you require.

The software you have purchased is not copy protected, allowing you to makeworking copies of the program and one backup copy for archival purposes.

WARRANTY

Accu-Sort Systems warrants the physical disks and physical documentation to be

free of defects in material and workmanship for a period of 30 days from the dateof purchase. In the event of notification within the warranty period of defects inmaterial or workmanship, Accu-Sort will replace the defective diskette ordocumentation. The remedy for breach of this warranty shall be limited toreplacement and shall not encompass any other damages.

Accu-Sort specification disclaims all other warranties of merchantability andfitness for any particular purpose. In no event shall Accu-Sort be liable for anyloss of profit or any other commercial damage.

Additional details on the coverage, support, and services available for your barcode scanning and automated systems equipment is available from:

Accu-Sort Systems, inc.2800 Crystal Drive 511 School House Road 2398 North Penn RoadHatfield, PA 19440 Telford, PA 18969 Hatfield, PA 19440

Phone: (215) 723-09811-800-BAR-CODE

FAX:

Internet: www.accusort.com

Telford Main.......... (215) 721-5551Customer Service...(215) 723-1515Systems.................. (215) 996-8181Sales .......................(215) 996-8282Acct/Mktg.............. (215) 996-8249TMS.......................(215) 996-8787North Penn.............(215) 997-4848


5/196

III

CUSTOMER SERVICE

If you have any problems or questions that require Accu-Sorts help, direct yourcalls to the Customer Service Department.

Accu-Sort Customer Service: phone: (215) 723-09811-800-BAR-CODE

(ask for Customer Service)(215) 723-5252 (local calls)

fax: (215) 723-1515

To ensure that Accu-Sorts response is prompt and accurate, please have thefollowing information ready to give the Customer Service Department whencalling:

Name and version of software Detailed description of the question or problem Customer contact name and phone number

Use Help About Scanner to find the name and version of the setup software youare running. Use Help About the Scanner, to find the scanner type, softwarename, logic, EE rev. and interface software name.


6/196

IV


7/196

Solutions with Vision

INTRODUCTION.................................................................................................................................................. IDISCLAIMER......................................................................................................................................... I

SOFTWARE LICENSING AND WARRANTY INFORMATION ....................................................................................... IIUSE OF SOFTWARE AGREEMENT ......................................................................................................... IIWARRANTY......................................................................................................................................... II

CUSTOMER SERVICE ....................................................................................................................................... III

Chapter OneIntroduction

CHAPTER EXPLANATION ............................................................................................................................... 1-2ABOUT ACCU-SETUP SUITE .......................................................................................................................... 1-2EQUIPMENT REQUIREMENTS......................................................................................................................... 1-2WHAT YOU NEED TO KNOW BEFORE YOU CAN USE ACCU-SETUP ................................................................. 1-4INSTALLING ACCU-SETUP ............................................................................................................................. 1-4CONNECTING YOUR PC TO THE SCANNER.................................................................................................... 1-4STARTING ACCU-SETUP IN WINDOWS 95OR HIGHER.................................................................................. 1-5

EXITING ACCU-SETUP .................................................................................................................................. 1-6AUTODETECTION ......................................................................................................................................... 1-7

ENABLE AUTODETECTION................................................................................................................ 1-8DISABLE AUTODETECTION ............................................................................................................... 1-8RESTART AUTODETECTION............................................................................................................. 1-9

MODIFIABLE OPERATING PARAMETERS ....................................................................................................... 1-10

Chapter TwoUsing Accu-Setup

CHAPTER EXPLANATION ............................................................................................................................... 2-2

USING WINDOWS

SOFTWARE ..................................................................................................................... 2-2

USING ACCU-SETUP..................................................................................................................................... 2-2

RETRIEVE SETUP FROM SCANNER................................................................................................... 2-4RETRIEVE SETUP FROM DISK .......................................................................................................... 2-5

SAVE OR SEND SETUP ................................................................................................................................ 2-6COMPARE SETUP ......................................................................................................................................... 2-8MODIFY SETUP PARAMETERS ..................................................................................................................... 2-10USING EDIT FUNCTIONS............................................................................................................................. 2-12USING OPTIONS ......................................................................................................................................... 2-13USING UTILITIES......................................................................................................................................... 2-14SCANNER OPTIONS .................................................................................................................................... 2-14

PASS-THRU ............................................................................................................................... ... 2-14USING ON-LINE HELP ................................................................................................................................. 2-15

MAIN CONTENTS WINDOW............................................................................................................. 2-15ABOUT ACCU-SETUP..................................................................................................................... 2-22

ABOUT SCANNER .......................................................................................................................... 2-22COMPATIBILITY LIST ................................................................................................................................... 2-23USING SCANNER STATUS AND RECOMMENDED ACTION WINDOWS ............................................................... 2-24

SCANNER STATUS......................................................................................................................... 2-24RECOMMENDED ACTION ................................................................................................................ 2-26

Table of Contents


8/196

ACCU-SETUP SUITE: MEDIUM SCANNER MODULE PROGRAMMING MANUAL

Accu-Sort Systems

Chapter ThreeProgramming Your Scanner with Accu-Setup

CHAPTER EXPLANATION ............................................................................................................................... 3-4MODIFY SETUP PARAMETERS ....................................................................................................................... 3-4SETTING UP BAR CODES.............................................................................................................................. 3-5BAR CODE (TYPES) SETUP WINDOW............................................................................................................ 3-6

CURRENT BAR CODE SETUP........................................................................................................... 3-7

BAR CODE TYPE ............................................................................................................................. 3-7MOD CHECK CHARACTER................................................................................................................ 3-8NUMBER OF CHARACTERS............................................................................................................... 3-8UPC EXTENSION ............................................................................................................................ 3-8QUANTITY PER TRIGGER ................................................................................................................. 3-9THE CODE IS IN GROUP? ................................................................................................................ 3-9CODE 128 FUNCTION CODES .......................................................................................................... 3-9VIEW MOD CHECKS......................................................................................................................... 3-9

MOD CHECK CHARACTER WINDOW............................................................................................................. 3-11FACTORS...................................................................................................................................... 3-11DIVISOR............................................................................................................................... ......... 3-12REMAIN ............................................................................................................................... ......... 3-12RIGHT............................................................................................................................... ............ 3-12

WRAP............................................................................................................................... ............ 3-12ADD............................................................................................................................... ............... 3-12

BAR CODE RATIOS............................................................................................................................... ...... 3-13PORT SETUP WINDOW............................................................................................................................... 3-14

SELECT COMM PORT.................................................................................................................... 3-15MESSAGE TYPE........................................................................................................................ 3-15COMMANDING ............................................................................................................................... 3-15BAUD RATE............................................................................................................................... ... 3-15PARITY ......................................................................................................................................... 3-16DATA BITS .................................................................................................................................... 3-16STOP BITS .................................................................................................................................... 3-16COMMUNICATION PROTOCOL......................................................................................................... 3-17FLOW CONTROL............................................................................................................................ 3-18

ENABLE ADP (ADVANCED DIAGNOSTIC PROTOCOL) ....................................................................... 3-18ENABLE AUTO SLAVE DETECT ....................................................................................................... 3-19NO-READ MESSAGE...................................................................................................................... 3-19MULTIPLE MESSAGE...................................................................................................................... 3-20NO VERIFY MESSAGE.................................................................................................................... 3-20VERIFY CODE............................................................................................................................... 3-20MESSAGE HEADER........................................................................................................................ 3-20MESSAGE TRAILER........................................................................................................................ 3-20DELIMITER BETWEEN DATA AND QQ .............................................................................................. 3-21DELIMITER BETWEEN MULTIPLE CODES ......................................................................................... 3-21

HEAD SETUP WINDOW............................................................................................................................... 3-22DATA FILTER OPTIONS .................................................................................................................. 3-22WIN ............................................................................................................................... ............... 3-22

MIN

TRANSITIONS

......................................................................................................................... 3-23FLIP POINT................................................................................................................................... 3-23DIVNEAR....................................................................................................................................... 3-23MINNEAR...................................................................................................................................... 3-23MAXNEAR............................................................................................................................... ...... 3-24MINFAR ............................................................................................................................... ......... 3-24MAXFAR ....................................................................................................................................... 3-24RELAY OPTIONS............................................................................................................................ 3-24NVC HOLD TIME........................................................................................................................... 3-25GO HOLD TIME............................................................................................................................. 3-25

TRIGGER SETUP OPTIONS .......................................................................................................................... 3-25


9/196

TABLE OF CONTENTS


TRIGGER MODE ............................................................................................................................ 3-25START CART FALLING EDGE .......................................................................................................... 3-26END CART FALLING EDGE............................................................................................................. 3-26TRIGGER SOURCE......................................................................................................................... 3-27SERIAL START CHAR ..................................................................................................................... 3-27SERIAL END CHAR ........................................................................................................................ 3-27DEBOUNCE ................................................................................................................................... 3-28TRANSMIT AT QQ.......................................................................................................................... 3-28

WATCH DOG................................................................................................................................. 3-28LASER POWER .............................................................................................................................. 3-29TRIGGER CONTROLLED LASER....................................................................................................... 3-29LATCH ZONE INPUT ....................................................................................................................... 3-29

ADVANCED HEAD SETUP ............................................................................................................................ 3-30PROC FREQ ............................................................................................................................... ... 3-30HEAD FREQ ............................................................................................................................... ... 3-30SCAN RATE............................................................................................................................... ... 3-30MOTOR SPEED.............................................................................................................................. 3-31NUMBER OF FACETS..................................................................................................................... 3-31

DRX SETUP WINDOW ................................................................................................................................ 3-32DRX ENABLED............................................................................................................................. 3-32MEMORY ALLOCATION OPTIONS.................................................................................................... 3-32

BOXES.......................................................................................................................................... 3-33SCANS.......................................................................................................................................... 3-33CLUSTERS .................................................................................................................................... 3-33STRINGS....................................................................................................................................... 3-33ELEMENTS .................................................................................................................................... 3-33

OVERLAY PARAMETER OPTIONS ................................................................................................................. 3-34POSITION ERROR .......................................................................................................................... 3-34MAX POSITION CHANGE ................................................................................................................ 3-34OVER RATIO ................................................................................................................................. 3-34MFAC ............................................................................................................................... ............ 3-34PAIRS ............................................................................................................................... ............ 3-35MIN OVERLAY ............................................................................................................................... 3-35

CLUSTER PARAMETER OPTIONS ................................................................................................................. 3-36

NUMBER

OPENS

........................................................................................................................... 3-36NUMBER CLOSES.......................................................................................................................... 3-36RECURSE COUNT.......................................................................................................................... 3-37KILL LIMIT ............................................................................................................................... ...... 3-37OPEN RATIO ................................................................................................................................. 3-37

DRX DIAGNOSTICS MODE OPTIONS........................................................................................................... 3-38DSP DIAGNOSTIC MODE ............................................................................................................... 3-38SHOW CODES READ...................................................................................................................... 3-38SHOW DSP ERRORS.................................................................................................................... 3-38RUN MODE ................................................................................................................................... 3-38DRX EVENT LOG .......................................................................................................................... 3-38SUPPRESS OPEN IF OVERLAID....................................................................................................... 3-38TRANSMIT ON THE FLY................................................................................................................. 3-38CUSTOM ....................................................................................................................................... 3-39

TRACKING SETUP WINDOW......................................................................................................................... 3-40TRACKING ENABLED...................................................................................................................... 3-40

BOX SETTINGS OPTIONS ............................................................................................................................ 3-41FRONT.......................................................................................................................................... 3-41BACK............................................................................................................................................ 3-41TOLERANCE............................................................................................................................... ... 3-41TTRUNK ENABLE (TRUNCATE BOX OVERLAP) ................................................................................. 3-41

HEAD CALIBRATION OPTIONS..................................................................................................................... 3-42SCAN DIRECTION .......................................................................................................................... 3-42TRACKING EDGE ........................................................................................................................... 3-42TACS PER INCH............................................................................................................................. 3-43


10/196


Accu-Sort Systems

TRANSMIT AT TAC ......................................................................................................................... 3-43ADVANCED TRACKING ................................................................................................................... 3-43

DEPTH SETTING OPTIONS.......................................................................................................................... 3-44NEAR DEPTH ................................................................................................................................ 3-45FAR DEPTH................................................................................................................................... 3-45NUMBER OF ZONES ....................................................................................................................... 3-45TRACKING DIAGNOSTIC MODE ....................................................................................................... 3-45SHOW CODE LOST ........................................................................................................................ 3-46

SHOW CODE LOCATED .................................................................................................................. 3-46RUN MODE ................................................................................................................................... 3-46DUAL LOCATION............................................................................................................................ 3-46ADVANCED TRACKING ................................................................................................................... 3-46SOFTWARE TACH .......................................................................................................................... 3-46TACH TYPE................................................................................................................................... 3-47

ADVANCED TRACKING CALCULATIONS......................................................................................................... 3-48ADVANCED TACHOMETER CALCULATIONS ...................................................................................... 3-48INPUT SIGNAL LENGTH (IN.) ........................................................................................................... 3-48FREQUENCY OF OUTPUT (TACH/INCH) ............................................................................................ 3-49ACTUAL LENGTH INPUT SIGNAL (IN.) .............................................................................................. 3-49HEAD & TAC/INCH SETTING........................................................................................................... 3-49

CUSTOM ............................................................................................................................... ..................... 3-51

Chapter FourUsing Accu-Setup Utilities

CHAPTER EXPLANATION................................................................................................................................ 4-2UTILITIES ..................................................................................................................................................... 4-2DIAGNOSTIC MODE...................................................................................................................................... 4-2

TERMINAL MODE............................................................................................................................. 4-4TRACKING CALIBRATION SETUP ....................................................................................................... 4-7

TRANSMIT POINT............................................................................................................................... ......... 4-11VIEW DIAG COUNTERS ............................................................................................................................... 4-13SCAN QUALITY............................................................................................................................... ............ 4-15RECOVER FROM BACKUP FILE .................................................................................................................... 4-18

SELECT COMM PORT.................................................................................................................... 4-18PORT SETTINGS......................................................................................................................................... 4-19

BAUD RATE............................................................................................................................... ... 4-19PARITY ......................................................................................................................................... 4-19DATA BITS .................................................................................................................................... 4-19STOP BITS .................................................................................................................................... 4-19OK............................................................................................................................................... 4-20CANCEL ..................................................................................................................................... 4-20

TERMINAL MODE ............................................................................................................................... ......... 4-20VIEW CHANGES.......................................................................................................................................... 4-21

Chapter FiveScanner Communications

CHAPTER EXPLANATION................................................................................................................................ 5-2CONNECTING TO A SCANNER......................................................................................................................... 5-2

ABOUT SCANNER DIAGNOSTIC CONNECTIONS .................................................................................. 5-3ESTABLISHING A CONNECTION THROUGH A MUX ............................................................................. 5-4PASSING-THRU A SCANNER ............................................................................................................. 5-5INITIATING A PASS-THRU WITH ACCU-SETUP .................................................................................... 5-5

AUTOMATIC MASTER/SLAVE DETECTION ....................................................................................................... 5-7DISABLING AUTO-DETECTION ........................................................................................................... 5-8CHANGING WATCHDOG TIMER .......................................................................................................... 5-8


11/196

TABLE OF CONTENTS


TRACKING CONFIGURATIONS ........................................................................................................... 5-8TROUBLESHOOTING SCANNER COMMUNICATIONS.......................................................................................... 5-9

Chapter SixScanner Diagnostics Tools

CHAPTER EXPLANATION ............................................................................................................................... 6-2

SCANNER ERROR AND MESSAGE LOGS ........................................................................................................ 6-2DISPLAYING THE ERROR AND MESSAGE LOGS ................................................................................. 6-2CLEARING THE ERROR AND MESSAGE LOGS ................................................................................... 6-3FILTERING THE ERROR LOG............................................................................................................ 6-3ACCESSING THE ERROR LOG, ERROR COUNTERS AND MESSAGE LOG FROM ACCU-SETUP ................ 6-3COMMUNICATIONS DATA................................................................................................................. 6-4

SCAN DATA VIEWING............................................................................................................................... ..... 6-5SCAN DATA............................................................................................................................... ..... 6-5SCAN DATA SUMMARY.................................................................................................................... 6-5

READ RATE, STATISTIC AND TIMING DATA..................................................................................................... 6-6READ RATE STATISTICS.................................................................................................................. 6-6SCANNER STATISTICS..................................................................................................................... 6-6TIMING STATISTICS......................................................................................................................... 6-7

ERROR DETECTION ...................................................................................................................................... 6-9SCANNER TRACKING CALIBRATION TOOL.................................................................................................... 6-10

USING TRACKING CALIBRATION..................................................................................................... 6-10TRKCAL COMMAND........................................................................................................................ 6-10

EXAMPLES OF CORRECT AND INCORRECT CONFIGURATIONS FOR TRACKING CALIBRATION ............................ 6-11MONITORING SERIAL COMMUNICATIONS...................................................................................................... 6-12

Chapter SevenCRT Commands

CHAPTER EXPLANATION ............................................................................................................................... 7-2CONNECTING A TERMINAL............................................................................................................................ 7-2ENTERING TERMINAL COMMANDS ................................................................................................................. 7-2

SYSTEM COMMANDS ............................................................................................................................... ..... 7-3SETUP COMMANDS...................................................................................................................................... 7-3ENTERING COMMUNICATION COMMANDS.......................................................................................... 7-4

ENTERING COMM COMMANDS....................................................................................................................... 7-4ENTERING DRX COMMANDS........................................................................................................... 7-8ENTERING TRACKING COMMANDS.................................................................................................. 7-10ENTERING CODE COMMANDS ........................................................................................................ 7-12ENTERING SETUP COMMANDS ....................................................................................................... 7-14ENTERING RATIO COMMANDS........................................................................................................ 7-17ENTERING RUNTIME COMMANDS................................................................................................... 7-18SPECIAL PORT MONITOR COMMANDS ............................................................................................ 7-20SPECIAL COMMANDS..................................................................................................................... 7-20

ASCII TABLE ............................................................................................................................................. 7-22

Index

Glossary


12/196


Accu-Sort Systems


13/196

MODEL 24 AND MINI-X SCANNERS ARE USED WITH ACCU-SETUP MEDIUM SCANNER MODULE........................1-3WINDOWS 95, 98 OR NT START-UP.............................................................................................................. 1-5EXIT CONFIRMATION WINDOW ...................................................................................................................... 1-6ACCU-SETUP MAIN WINDOW ........................................................................................................................ 1-7AUTODETECTION ERROR MESSAGE .............................................................................................................. 1-9

ACCU-SETUP MAIN WINDOW ........................................................................................................................ 2-3FILE LOCATION SELECTION WINDOW............................................................................................................. 2-5SAVE SETTINGS TO DISK FILE LOCATION WINDOW......................................................................................... 2-7COMPARE SCANNER WITH FILE ..................................................................................................................... 2-8COMPARE FILE TO FILE................................................................................................................................ 2-8COMPARISON RESULTS WINDOW .................................................................................................................. 2-9MODIFY SETUP MENU BAR ......................................................................................................................... 2-11RECOVER FROM BACKUP WINDOW ............................................................................................................. 2-13HELP CONTENTS WINDOW.......................................................................................................................... 2-16ANNOTATE WINDOW................................................................................................................................... 2-17BOOKMARK WINDOW............................................................................................................................... ... 2-18HELP INDEX WINDOW ................................................................................................................................. 2-19TOPIC WINDOW.......................................................................................................................................... 2-20

SEARCH WINDOW...................................................................................................................................... 2-21ABOUT ACCU-SETUP............................................................................................................................... ... 2-22ABOUT SCANNER ....................................................................................................................................... 2-22COMPATIBILITY LIST WINDOW ..................................................................................................................... 2-23MODIFY SETUP BUTTON BAR ........................................................................................................................ 3-4BAR CODE SETUP MENU BAR....................................................................................................................... 3-5BAR CODE SETUP WINDOW.......................................................................................................................... 3-6VIEW MOD CHECKS WINDOW..................................................................................................................... 3-10USER DEFINED MOD CHECK SETUP ............................................................................................................ 3-11BAR CODE RATIO WINDOW......................................................................................................................... 3-13PORT SETUP WINDOW............................................................................................................................... 3-14ADVANCED SETUP PORT 1 WINDOW ........................................................................................................... 3-19HEAD SETUP WINDOW............................................................................................................................... 3-22

ADVANCED

HEAD

SETUP

WINDOW

.............................................................................................................. 3-30DRX SETUP WINDOW ................................................................................................................................ 3-32TRACKING SETUP WINDOW......................................................................................................................... 3-40SCAN DIRECTION ....................................................................................................................................... 3-42ADVANCED TRACKING WINDOW .................................................................................................................. 3-43CUSTOM SETUP WINDOW........................................................................................................................... 3-51DIAGNOSTIC WINDOW.................................................................................................................................. 4-3TERMINAL WINDOW...................................................................................................................................... 4-4TERMINAL HELP WINDOW............................................................................................................................. 4-7TRACKING CALIBRATION WINDOW................................................................................................................. 4-8TRANSMIT POINT WINDOW......................................................................................................................... 4-11VIEW DIAGNOSTIC COUNTERS WINDOW ...................................................................................................... 4-13SCAN QUALITY WINDOW............................................................................................................................. 4-15RECOVER FROM BACKUP WINDOW ............................................................................................................. 4-18

PORT SETTINGS WINDOW.......................................................................................................................... 4-19TERMINAL WINDOW.................................................................................................................................... 4-20VIEW CHANGES WINDOW........................................................................................................................... 4-21DIRECT CONNECTION TO A SCANNER ............................................................................................................ 5-2SCANNER TO MUX DIRECT CONNECTION....................................................................................................... 5-4MASTER TO SLAVE SCANNER CONNECTION ................................................................................................... 5-7ASCII CHART ............................................................................................................................................ 7-22

Table of Figures


14/196


Accu-Sort Systems


15/196

Chapter One Contents

Chapter OneIntroduction

1Heading 2

CHAPTER EXPLANATION ........................................................................... 1-2

ABOUT ACCU-SETUP SUITE ...................................................................... 1-2

EQUIPMENT REQUIREMENTS...................................................................... 1-2

WHAT YOU NEED TO KNOW BEFORE YOU CAN USE ACCU-SETUP............. 1-4

INSTALLING ACCU-SETUP ......................................................................... 1-4

CONNECTING YOUR PC TO THE SCANNER ................................................ 1-4

STARTING ACCU-SETUP IN WINDOWS 95OR HIGHER .............................. 1-5

EXITING ACCU-SETUP ............................................................................... 1-6

AUTODETECTION ...................................................................................... 1-7

ENABLE AUTODETECTION ..................................................................... 1-8DISABLE AUTODETECTION ..................................................................... 1-8RESTART AUTODETECTION ................................................................... 1-9

MODIFIABLE OPERATING PARAMETERS ................................................... 1-10


16/196

1-2 ACCU-SETUP SUITE:MEDIUM SCANNER MODULE PROGRAMMING MANUAL

Accu-Sort Systems

CHAPTER EXPLANATION

This chapter introduces you to the Accu-Setup Suite: Small Scanner Module forMicrosoftWindows95, Windows98, and Windows NToperating systems.

We explain installation, execution, and what you need to run Accu-Setup.

ABOUT ACCU-SETUP SUITE

Welcome to Accu-Setup which is a Windows-based program you can use to set

up your Accu-Sort medium sized scanner. Every scanner has a variety ofoperating parameters, which need to be set for the scanner to work efficiently.You must be running Windows 3.1or higher to run Accu-Setup. This program

provides easy-to-use features for setting up your Accu-Sort Scanner. The Accu-Setup program allows you to:

Change bar code specifications Set up hardware parameters Set up port communication parameters Determine tracking settings and diagnose problems Save parameters to your hard drive

You must be familiar with the Windowsoperating system, as well as DOS

filenaming conventions, directory structures, and pathnames to efficiently useAccu-Setup.

EQUIPMENT REQUIREMENTS

To use Accu-Setup you need to have at least the following:

IBM or IBM-compatible personal computer with a 286 processor and 4MbRAM

Hard disk with 3M free disk space Windows 95or later

VGA graphics adapter and monitor A mouse that works in Windows Operating System

CD-ROM drive

If running a WindowsOperating System on a network, consult your MISDepartment. Medium Scanner Setup may not install properly without proper

access to the Windows directory.


17/196

INTRODUCTION 1-3


Model 24 and Mini-X Scanners are used with Accu-Setup Medium Scanner Module

Mini-X

Model 24


18/196


Accu-Sort Systems

WHAT YOU NEED TO KNOW BEFORE YOU CANUSE ACCU-SETUP

Before you can use Accu-Setup you must have a basic understanding ofMicrosoft Windows. You should be able to use basic features and operate a

mouse. This manual focuses on Accu-Setup operations. For specific informationabout Windows, see the guide that comes with your operating system. On the

facing page is the Accu-Setup main window.

INSTALLING ACCU-SETUP

Accu-Setup version 3.2 is distributed on a CD-ROM. Insert the CD-ROM intoyour CD-ROM drive and the installation program will start automatically.Follow the directions provided by the installation program to install Accu-Setup3.2 on your PC.

If the installation program does not start automatically, run the LAUNCH.exe fileat the root of the CD-ROM.

CONNECTING YOUR PC TO THE SCANNER

Refer to the hardware manual of the Accu-Sort device you are setting up. Forexample, if setting up a Model 24, refer to the Model 24 Hardware OperationsGuide for details on wiring and proper PC to Scanner connections


19/196

INTRODUCTION 1-5


STARTING ACCU-SETUP IN WINDOWS 95ORHIGHER

To start Accu-Setup in the Windows 95, Windows 98or Windows NT

environments, click on your start button and drag to programs. The Accu-SetupSuite should appear in the list of programs available. Drag to the Setup optionyou wish to run, Medium or Small and release.

Windows 95, 98 or NT Start-up


20/196


Accu-Sort Systems

EXITING ACCU-SETUP

To exit Accu-Setup you can do one of the following:

Click the button. Click Fileand Exit

Either choice displays the Exit Accu-Setup window as shown below. Click onOK to close Accu-Setup and return to the Program Manager. Choose CANCELto remain in Accu-Setup for Windows.

Exit Confirmation Window


21/196

INTRODUCTION 1-7


AUTODETECTION

Your PC can automatically detect the communication parameters for the scannerconnected to it and set the port connected to the scanner to those sameparameters. This feature is called Autodetection. Under Autodetection there arethree options:

Enable Autodetection Disable Autodetection Restart Autodetection

Accu-Setup Main Window

Do not turn on the system until all components are properly cabled and groundedwith three-conductor AC power cords. Do not use a two-prong adapter. Do notuse an extension cord to defeat the ground.


22/196


Accu-Sort Systems

ENABLE AUTODETECTION

There are two ways you can enable Autodetection:

Press and simultaneously.Click on the Autodetection selection from the menu bar and selectEnable

Autodetection.

If you enable Autodetection, your PC will determine the communicationsparameters of the scanner attached to it. For example, if your scanner is notcommunicating, the scanner status window displays the following:

When enabled, the following message appears as the PC transfers the scannerparameter.

DISABLE AUTODETECTION

There are two ways you can disable Autodetection:

Press and simultaneously.

Click on the Autodetection selection on the menu bar and selectDisableAutodetection.

If you disable autodetection, your PC stops detecting the communicationsparameters of the scanner attached to your PC. The Scanner Status window willdisplay the following:


23/196

INTRODUCTION 1-9


RESTART AUTODETECTION

There are two ways you can restart Autodetection:

Press and simultaneously. Click on the Autodetection selection on the menu bar and selectRestart

Autodetection.

This allows you to restart the Autodetection process for a new scanner attachedto your PC port.

If Autodetection does not detect a scanner is attached, an error message displays.

Autodetection Error Message


24/196


Accu-Sort Systems

MODIFIABLE OPERATING PARAMETERS

This program allows you to set the communication and other operatingparameters of your scanner. Modify Setup offers five selections for changingthese scanner operating parameters. They are as follows:

Bar Code Setup

Port Setup Head Setup DRX Setup Tracking Setup Custom

Before you can begin modifying these parameters, it is a good idea to understandyour scanner application. The better you understand your application, the moreeasily you will be able to establish efficient operating parameters for yourAccu-Sort device. You may also speak with an Accu-Sort Applications Engineerregarding these parameters.

In Chapter 3, this manual provides you with detailed descriptions of every setupparameter available for your Accu-Sort device and how to set them up.


25/196

Chapter TwoUsing Accu-Setup

2Heading 2


USING WINDOWS

SOFTWARE .................................................................. 2-2

USING ACCU-SETUP ................................................................................. 2-2

RETRIEVE SETUP FROM SCANNER ......................................................... 2-4RETRIEVE SETUP FROM DISK ................................................................ 2-5

SAVE OR SEND SETUP............................................................................. 2-6

COMPARE SETUP...................................................................................... 2-8

MODIFY SETUP PARAMETERS.................................................................. 2-10

USING EDIT FUNCTIONS .......................................................................... 2-12

USING OPTIONS ...................................................................................... 2-13

USING UTILITIES ..................................................................................... 2-14

SCANNER OPTIONS ................................................................................. 2-14

PASS-THRU ........................................................................................ 2-14

USING ON-LINE HELP.............................................................................. 2-15

MAIN CONTENTS WINDOW................................................................... 2-15ABOUT ACCU-SETUP .......................................................................... 2-22ABOUT SCANNER................................................................................ 2-22

COMPATIBILITY LIST ............................................................................... 2-23

USING SCANNER STATUS AND RECOMMENDED ACTION WINDOWS........... 2-24

SCANNER STATUS............................................................................... 2-24RECOMMENDED ACTION ...................................................................... 2-26

Chapter Two Contents


26/196


Accu-Sort Systems

CHAPTER EXPLANATION

This chapter explains how to use Accu-Setup Suite: Medium Scanner Modulesoftware and its easy-to-operate features.

USING WINDOWSSOFTWARE

Before you can use Accu-Setup you must have a basic understanding ofMicrosoft Windows. You should be able to use basic windowsfeatures and

operate a mouse. This manual focuses on Accu-Setup operations. For specificinformation about Windows, see the Guide that comes with your operating

system. After you have clicked on the Accu-Setup icon, the Accu-Sort SystemsScanner Setup Main Window appears as shown on the facing page.

USING ACCU-SETUP

There are four basic things you can do with Accu-Setup:

Retrieve Setup From Scanner or Disk Modify Setup Save Setup to Scanner or Disk Diagnose Scanner problems

RETRIEVE SETUP

After you enter Accu-Setup you need to retrieve the existing device setupparameters to your PC from the scanner you are setting up, or from a disk onwhich they may have been stored. This allows you to start with the parametersthat your device currently uses, or a set of workable parameters you have saved.When you have retrieved the device parameters you can begin changing them tomeet your application needs.

NOTE:This option is only accessible if a communication link has been

established with the scanner.


27/196

START UP AND OPERATION 2-3


Accu-Setup Main Window


28/196


Accu-Sort Systems

RETRIEVE SETUP FROM SCANNER

Retrieve Setup From Scanner begins the upload process. It sends a message

requesting the scanners current settings. The fields in Accu-Setup areautomatically updated. To Retrieve Setup from your scanner you can do one ofthe following:

Click the button Click File, Retrieve from Scannerfrom the Accu-Setup main window

You have now retrieved the parameters of the scanner to which your PC isconnected.

NOTE:This option is only accessible if a communication link has been

established with the scanner.


29/196



RETRIEVE SETUP FROM DISK

Retrieve Setup From Disk uploads a disk file of previously stored parameters.To Retrieve Setup from disk you can do one of the following:

Click the button Click File, Retrieve from Diskfrom the Accu-Setup main window

A window displays allowing you to select the appropriate disk as shown below.When you first use Accu-Setup a DEFAULT.WSA file exists containing a set ofdefault parameters. Anytime you save a set of parameters using Accu-Setup, yousave them as a WSA file.

File Location Selection Window


30/196


Accu-Sort Systems

SAVE OR SEND SETUP

After you enter Accu-Setup and have modified your scanner setup, you need tosave your new device setup parameters to the scanner you are setting up, or to adisk on which you would like to store them.

SEND SETUP TO SCANNER

To save the setup to your scanner you can do one of the following:

Click the button Click File, Save to Scannerfrom the Accu-Setup main window.

You have now saved the parameters you have selected to the scanner connectedto your PC.

SAVE SETUP TO DISK

If you would like to store the setup parameters you have established to a disk,you can specify a file name and location. To save setup to disk, do one of thefollowing:

Click the button Click File, Save to Diskfrom the Accu-Setup main window. The followingwindow appears.

NOTE:When saving to a disk, save as a WSA file.


31/196



You have now saved the parameters to a disk in your floppy disk drive.

Save Settings to Disk File Location Window

Select the location where you want to save the file and name the file.


32/196


Accu-Sort Systems

COMPARE SETUP

You can also compare the setup parameters on a disk in your disk drive to thoseon the scanner attached to your PC, or to those you are currently working in onyour PC. You may want to do this to make sure you have the same set ofparameters stored in each location.

Scanner with File File to File

SCANNER WITH FILE

You can compare setup parameters between a scanner connected to your PC anda file you have saved on your PC or a floppy disk.

From the Accu-Setup main window, click File, Compare, Scanner with File

Compare Scanner with File

FILE TO FILE

You can compare setup parameters between two files saved on your PC and anydisk.

Click File, Compare, File to File.

Compare File to File


33/196



Whichever compare option you select, the following comparison window appearsto list the results.

Comparison Results Window


34/196


Accu-Sort Systems

MODIFY SETUP PARAMETERS

Modify Setup from the Main window offers five windows with options forchanging the setup parameters you have retrieved from disk or scanner.

Bar Code Setup Port Setup

Head Setup DRX Setup Tracking Setup Custom

There are many fields under each of these parameter selections you may need tochange to suit your application requirements. Chapter 3 provides a detailedexplanation of how to select certain parameter options and what they represent.You can access Modify Setup one of two ways:

Click on the button, or From the Accu-Setup main window click Edit, Modify Setup

The Modify Setup button bar displays as shown on the following page.

Select one of the parameter option category buttons from the Modify SetupWindow as listed above and enter new values into the various fields. After youhave made all of the parameter changes you wish to make, you can choose one ofthe following:

OK - Stores parameter settings you have just made for future saves to thescanner.

Cancel - Cancels any modifications you have made to the parameters and restoresold settings.

Once you have entered each of the five Modify Setup Parameter selectionwindows and made all of the necessary changes to suit your application needs,you will want to save your new file to scanner or disk.

Select to exit and save your changes.

Select to exit and not save your changes.


35/196



Modify Setup Menu Bar


36/196


Accu-Sort Systems

USING EDIT FUNCTIONS

There are three choices available under Accu-Setup Edit functions:

Create Backup File Modify Setup Recover From Backup File

CREATE BACKUP FILE

To create a backup file of the parameters your have set using Accu-Setup, clickEdit, Create Backup File.

MODIFY SETUP

You may also access the Modify Setup Button Bar by selecting Modify Setup viathe Edit Menu Bar Option. Click Edit, Modify Setup. The Modify Setup ButtonBar displays.

RECOVER FROM BACKUP FILE

You may recover your setup parameters from a backup file. ClickEdit, Recoverfrom Backup File. Select the desired backup file and click OK. The parametersettings you have backed up will be restored.


37/196



Recover From Backup Window

USING OPTIONS

There is two choices available under Accu-Setup options:

Autobackup Autoretrieve

Autobackup automatically backs up the file of setup parameters you have

currently saved. Autoretrieve automatically retrieves the setup parameters fromthe scanner when you start Accu-Setup. If Autoretrieve is not selected when youstartup, a window appears reminding you to retrieve the setup from the scanner.

To use the Autobackup or Autoretrieve options, click on that option. A checkmark appears next to the option(s) you have selected.


38/196


Accu-Sort Systems

USING UTILITIES

Utilities are described in Chapter 4.

SCANNER OPTIONS

There are two scanner options from the menu bar:

Pass Thru Close Scanner Connection

PASS-THRU

Allows the user to Initiate or Disconnect a pass-thru using the scanner. If using amaster/slave scanner configuration, pass-thru mode allows the user to passthrough the current scanner and connect to the next scanner (either a master orslave) in the chain. For scanner configurations using more than one scanner(master->slave->slave), multiple pass-thru connections can be established.

CLOSE SCANNER CONNECTION

Closes the connection to the scanner and disables auto-baud. This selection isvery useful if you wish to change the scanner to which Accu-Setup iscommunicating (either by moving cables or modifying the configuration of aMUX computer) without exiting Accu-Setup.

The scanner options will not be available unless your PC is connected to ascanner and the scanner logic board is running EE revision 5 or later. These

options are not available on scanners running software prior to EE revision 5.


39/196



USING ON-LINE HELP

When you need information on-line, use Accu-Setup for Windows HELP.

HELP is structured to make information easy to find. Explanations of all Accu-Setup parameters are clearly defined. Use one of the following help methods.

Main Contents Window Search

MAIN CONTENTS WINDOW

This portion of on-line HELP explains how to use the Main Window of Accu-Setup. It categorizes the contents by the button bar and the menu. When youfirst select on-line HELP this is where it will start. The following functions areavailable in the HELP Main Window from the menu bar:

File Edit Bookmark Help


40/196


Accu-Sort Systems

Help Contents Window

File

The HELP file option allows you to open any file, printa topic from help, prints your setup parameters, or exit

HELP.


41/196



Edit

The HELP edit option allows you to copy text from on-line HELP and copy itwherever you need to. It also allows you to make a special note in portions ofon-line HELP using annotate.

To annotate:1. At the desired insertion point, click on Annotate and drag to define2. Type the information you wish to make note of3. Click on SAVE and a small green paper clip appears at the insertion point

Annotate Window


42/196


Accu-Sort Systems

Bookmark

The HELP bookmark option allows you to mark a place in Accu-Setup HELP tothe Bookmark menu bar for quick reference.

To create a Bookmark:1. At the desired insertion point, click on Bookmark and drag to define2. In the Bookmark name field, type a title for what you wish to mark3. Click on OK, the entry will now appear in the list of Bookmarks

Bookmark Window

HELP

Click on HELP for instructions on using ACCU-SETUP HELP.

Contents Index

When in the HELP window, click the content button and an index of the contentsof Accu-Setup for windows displays. The following topics are listed in theindex:


43/196



Help Index Window

Simply click on the topic you wish to find out about and a description of thattopic displays.


44/196


Accu-Sort Systems

Topic Window

Search

When in the HELP window, click on Search and a search window displays. Hereyou can specify a topic or select a topic about which you would like moreinformation.

To search for a topic:1. Click Help, Search For Help On., or2. From the Help Window, click the Search button


45/196



Search Window

Click on BACK to return to the previously viewed window.


46/196


Accu-Sort Systems

ABOUT ACCU-SETUP

Click About Accu-Setup to see the version of the Medium Scanner Setup you areusing. For example:

About Accu-Setup

ABOUT SCANNER

Click About the Scanner to see the scanner type, software name, EEPROMrevision, interface software name and name(s) of any custom program(s)associated with your scanner.

About Scanner


47/196



COMPATIBILITY LIST

Click Compatibility List to see what scanners this version of Accu-Setup willwork with.

Compatibility List Window


48/196


Accu-Sort Systems

USING SCANNER STATUS AND RECOMMENDEDACTION WINDOWS

On the bottom of the Accu-Setup Main Window are two small status windows:

Scanner Status Recommended Action

SCANNER STATUS

The Scanner Status Window displays if the PC is communicating with a scanneror not. It also displays the format of those communications, if communicatingwith a scanner.

Listed below are all of the possible scanner status messages:

Scanner not responding. Auto detection in progress. bbbb,p,s,1 -Accu-Setup is attempting to establish a serial link with a scanner. When a new scanneris connected to your PC, Accu-Setup does not know what the current scannercommunication settings are, so Accu-Setup tries all possible communicationsettings until a response is received. The communication settings currently beingused by Accu-Setup are indicated at the end of the message: bbbb=baud, p=parity(E,O, or N), s=number of bits (7 or 8) and 1=number of stop bits.

Sending Request for Head info. bbbb,p,s,1- Accu-Setup needs to know thetype of head used by the scanner to which it is connected. Accu-Setup sends a

request to the scanner for information about the head type.

Sending Request for Connect Status. bbbb,p,s,1 Accu-Setup needs to know

about the scanner communications port through which Accu-Setup is

communicating. Accu-Setup sends a request for information about the port.

Sending Request for interface version. bbbb,p,s,1- Accu-Setup needs to know

the version of the interface board used within the scanner to which it is

connected. Accu-Setup sends a request to the scanner for information about the

interface board.

Sending Request for Device Type- Accu-Setup needs to know what type of

scanner to which it is connected. Accu-Setup sends a request to the scanner forits device type.

*Auto Detect: xxxxxxx*- Accu-Setup is communicating with a scanner that hasbeen automatically configured as master or slave scanner (xxxxxxcan be either

MASTER, SLAVE or MASTER/SLAVE).

ModelxxResponding atbbbb,p,s,1.- Accu-Setup has detected a scanner of the

indicated type and is communicating with it at the indicated communication

settings.


49/196



Software Name:nnnnnn, date_of_release. Serial #:sssssss- Accu-Setup isnow communicating with a scanner which is executing software named: nnnnnn.The serial number of the unit is sssssss.

Sending Request for comm n Params Accu-Setup is in the process of

uploading the settings for scanner communications port n (n is port number

from 1 to 4).

Sending Request for Setup Params- Accu-Setup is in the process of uploading

the general setup parameters from the scanner. This includes the DRX, Setup,

and Tracking parameters.

Sending Request for IO Params- Accu-Setup is in the process of uploading the

Input Output settings from the scanner. This includes the software trigger start

and stop characters and the output relay timers.

Sending Request for Custom Params- Accu-Setup is in the process of

uploading the custom command parameters from the scanner.

Sending Request for Interface Params- Accu-Setup is in the processor of

uploading the parameters from the interface board.

Autodetection Disabled by User Press to Enable. - TheAutoDection process has been disabled. Press +E to re-enableAutoDetection.

Connection to Scanner Closed. To Reconnect, Restart Auto-Detection (ctrl-r).- Accu-Setup has closed the connection to the scanner and disable auto-detection.

The Following Will Appear Only in Interface ModeInterface Mode is used with a Model 24E, which as external logic.

Medium Scanner Setup is looking for the interface boardAccu-Setup has been placed into the Interface Only mode. Accu-Setup will firstattempt to locate and available parallel port then attempt to read the interfacename and version from the interface board.

Interface board found. Interface Name:nn. Interface revision:rr.Accu-Setup has located a parallel port and contacted the interface board. Themessage indicates the name and revision of the interface board.

Medium Scanner Setup is reading the interface board.The Retrieve from Scanner option has been selected and Accu-Setup is in the

process of reading the current settings from the interface board.

Medium Scanner Setup is programming the interface board.The Send Settings to Scanner option has been selected and Accu-Setup is inthe process of downloading new settings to the interface board.

Programming SuccessfulNo errors occurred when programming the interface board.


50/196


Accu-Sort Systems

Medium Scanner Setup cannot find an interface board. Verify unit isturned on and connected to a parallel port.Accu-Setup was unable to communicate with the interface board.

Programming Not SuccessfulErrors did occur when programming the interface board and the programming

was not successful.

RECOMMENDED ACTION

The Recommended Action Window displays general recommendations if you areunsure of what to do. It also displays upper and lower boundaries for user entryfields.

Stand By. Attempting to link with scanner- Accu-Setup is trying to establish acommunication link with the scanner. This is called the AutoDetection process.You may disable the AutoDetection process by selecting AutoDetection from themain menu, then selecting Disable AutoDetection, or by pressing at the main window.

Creating Parameter Backup File 95123456 - If you have the Auto Backupoption enabled, every time Accu-Setup establishes a new link with a scanner itwill create a backup file of the current scanner setup. This does NOTautomatically retrieve the setup. It is still necessary to retrieve the setup from thescanner before you can go to Modify Setup . The backup files are stored in theBAK directory; you can retrieve them from the directory even though they do nothave a .WSA extension.

Please select one of the options from the button bar or the menu- Accu-Setup is waiting for you to select an option.

Backup Complete. Please select one of the options from the button bar-Accu-Setup has created a new backup file and is waiting for you to select anoption from either the button bar or the menu.

Please Select one of the options on the Modify Setup Button Bar- Accu-Setup is waiting for you to select an option from the Modify Setup Button Bar.

Please Enter a Number Betweenn1andn2- This message appears when thecursor moves into a user entry field. A user entry field is any field that youdirectly enter data. This includes text boxes and excludes drop down lists, checkboxes, radio buttons, etc. This tells you the limits of the possible entries for thisfield. This message will display in red if you try to move out of the user entryfield after entering data that is too small or too large. You must enter data that iswithin bounds in order to leave the field.


51/196



Close window. No changes have been made - This message appears wheneither the OKor CANCELbuttons are highlighted and no changes have beenmade to any fields in that window.

Close window. This will SAVE your changes -This message appears when theOKbutton is highlighted and changes have been made to at least one of thefields in the window.

Close window. This will CANCEL your changes- This message appears whenthe CANCELbutton is highlighted and changes have been made to at least oneof the fields in the window.

Pass-thru connectionxinitiated. Attempting to connect to new scanner.The scanner has been placed into pass-thru mode and Accu-Setup will now try toestablish a connected with the new scanner. x indicates the number of pass-thru

connections which are currently active.


52/196


Accu-Sort Systems


53/196

Chapter ThreeProgramming Your Scanner with Accu-Setup

3Heading 2


MODIFY SETUP PARAMETERS.................................................................... 3-4

SETTING UP BAR CODES .......................................................................... 3-5

BAR CODE (TYPES) SETUP WINDOW ......................................................... 3-6

CURRENT BAR CODE SETUP ................................................................. 3-7BAR CODE TYPE ................................................................................... 3-7MOD CHECK CHARACTER...................................................................... 3-8NUMBER OF CHARACTERS..................................................................... 3-8UPC EXTENSION .................................................................................. 3-8QUANTITY PER TRIGGER ....................................................................... 3-9THE CODE IS IN GROUP?....................................................................... 3-9CODE 128 FUNCTION CODES................................................................. 3-9

VIEW MOD CHECKS............................................................................... 3-9

MOD CHECK CHARACTER WINDOW ......................................................... 3-11

FACTORS ............................................................................................ 3-11DIVISOR .............................................................................................. 3-12REMAIN .............................................................................................. 3-12RIGHT ................................................................................................. 3-12WRAP................................................................................................. 3-12ADD.................................................................................................... 3-12

BAR CODE RATIOS ................................................................................. 3-13

PORT SETUP WINDOW ............................................................................ 3-14

SELECT COMM PORT........................................................................... 3-15MESSAGE TYPE.............................................................................. 3-15COMMANDING ..................................................................................... 3-15BAUD RATE ........................................................................................ 3-15PARITY ............................................................................................... 3-16DATA BITS.......................................................................................... 3-16STOP BITS .......................................................................................... 3-16COMMUNICATION PROTOCOL ............................................................... 3-17FLOW CONTROL.................................................................................. 3-18ENABLE ADP (ADVANCED DIAGNOSTIC PROTOCOL, PORT 1 ONLY) ..... 3-18ENABLE AUTO SLAVE DETECT............................................................. 3-19

Chapter Three Contents


54/196

3-2 ACCU-SETUP SUITE: MEDIUM SCANNER MODULE PROGRAMMING MANUAL

Accu-Sort Systems

NO-READ MESSAGE............................................................................ 3-19MULTIPLE MESSAGE ........................................................................... 3-20NO VERIFY MESSAGE .......................................................................... 3-20VERIFY CODE...................................................................................... 3-20MESSAGE HEADER.............................................................................. 3-20MESSAGE TRAILER ............................................................................. 3-20DELIMITER BETWEEN DATA AND QQ ................................................... 3-21DELIMITER BETWEEN MULTIPLE CODES ............................................... 3-21

HEAD SETUP WINDOW ............................................................................ 3-22

DATA FILTER OPTIONS ........................................................................ 3-22WIN .................................................................................................... 3-22MIN TRANSITIONS................................................................................ 3-23FLIP POINT ......................................................................................... 3-23DIVNEAR............................................................................................. 3-23MINNEAR............................................................................................ 3-23MAXNEAR........................................................................................... 3-24MINFAR .............................................................................................. 3-24MAXFAR ............................................................................................. 3-24RELAY OPTIONS..................................................................................

accusetup suite medium scanner module programming manual

Documents