accessories and workbenches esd...
TRANSCRIPT
Elabo LaboratorySystems L 184
Electrostatic voltages are generated through friction or separation of insulating materials. Objects and people may be charged to high potential values. Sensitive semiconductors may be damaged without users noticing at discharge pulses of below 100 V.
When working with ESD components, safety measures must be taken. Damage due to excessively high voltages on the compo-nent connections can be avoided by taking appropriate measures:
1 Electronics protection zones (EPA) with conductive floor and table coatings as well as ESD-compatible tools and non-charge-able work clothes.
2 Use of conductive table mats, work chairs, wrist straps and grounding systems with fitted protective resistor at individual work stations.
3 Maintenance of a relative air humidity of at least 40 % with suitable air conditioning devices.
Conductive Elabo ESD work tables are equipped with a volume conductive tabletop. The table frame is powder coated with con-ductive material. All metal parts and the work surface are continu-ously conductively connected.
The dissipation resistance of the table system is, pursuant to IEC 61340-5-1, 106 to 109 Ohm. The tables are prepared for the connection of the PE earth line and an earthing module (EBP).
Accessories and workbenches ESD accessories
Connection for PE ground line
Volume conductive tabletop
Antistatic edge coating
Conductive, powder coated table base frame
Connection for grounding wrist strap
Example: EcoTecSP table
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Width Depth Height Order no.
Dimensions in mm
Elabo LaboratorySystems L 185
ESD accessories Accessories and workbenches
Conductive foam for application onto ESD modules; for lining drawers and containers.Colour: black
Table mat
Full rubber lattice mat
Foam
Flooring
Conductive table mat for tables without appropri-ate surface.Underside provided with conductive foam to make it slide-proof. ESD earth connec-tion for earthing module and earthing arm band by means of 10 mm ø pushbuttons. Colour grey
Connection cable
01-4L
01-4X ZNCABLE
Conductive full rubber lattice mat as protective base for repair and fabrication with 10 mm ø pushbutton con-nection. Colour black
01-4W
01-4U
Conductive flooring with good lying property. Castor-protected, two-layer synthetic rubber with back coating. Pushbutton connec-tion 10 mm ø with 1.5 m con-nection cable for ESD ground connection, e.g. on the table frame. Colour grey
01-4V
900 x 520 x 2
625 x 375 x 20
330 x 240 x 6
1500 x 1220 x 3.5
Elabo LaboratorySystems L 186
Rotating base
Device plate
Foot rest
Foot rest
Rotating base, covered both sides with a ribbed rubber mat, colour: blackLoading capacity: 180 kg
Standard
ESD
Rotary table (adjustable) made of stainless steel, mainte-nance-free friction bearings. Upper side with ribbed rubber mat, underside with smooth rubber mat, including locking lever; colour black.Loading capacity: 180 kg
Standard
ESD
Footrest made of light grey polystyrene, ribbed surface. The integrated "Stay-fit roller" promotes blood circulation
Standard, light grey
ESD, black
Stable foot support, adjustable in height and angle. Footrest with rubber covering, frame made of 40 mm square tubing, grey-white powder coating, with levelling feet for compen-sating for uneven flooring.
ESD
380 20
380 20
380 20
380 20
500 x 370 x 100 500 x 370 x 100
540 x 440 x 500
540 x 440 x 500
Dimensions in mm
85-4N
85-4N Z01
85-4L
01-4E
78-4J
78-4K
78-4G
78-4H
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Width Depth Height Order no.
Accessories and workbenches ESD accessories
Elabo LaboratorySystems L 187
Accessories and workbenches
Storage container
PCB magazine
ESD wrist strap
Small parts magazine
Identification plates
Conductive storage con-tainer made of polypro-pylene.Stackable design for storage and provision of ESD modules.Colour: black
Conductive circuit board storage magazine for safe storage of circuit boards. No sliding out, thanks to the slight-ly tilted position. In the event of wet circuit boards, residual fluid is drained off through drainage holes. Colour black
Conductive, adjustable earthing armband with 1 MOhm protective resistor. Contacting via 10 mm Ø push-button on the table mat or EBP.1.3 m spiral cable, can be extended to 2.5 m.
Ground bonding point (drawing on right-hand side) on next page.
ESD small parts maga-zine with conductive drawers made of polystyrene in a steel plate housing.Colour: black
48 drawers12 drawers
Identification plate for ESD work stations. Self-adhesive, highly abrasion-resistant PVC, resistant against cleaning agents. Identification plate made of hard plastic with mounting holes, printing on both sides.
149 x 192 x 105 149 x 250 x 130 186 x 300 x 156
275 x 208 x 93
310 x 180 x 550 300 x 160 x 270
120 x 60
500 x 300
01-4A01-4B01-4C
01-4Q
01-4X
01-4P01-4N
Order no.
Order no.Width Depth HeightTechnical data
Technical data Width Depth Height
Width Depth Height Order no.
Order no.Width Depth Height
Width Depth Height Order no.Technical data
Technical data
Technical data
Dimensions in mm
01-4F
01-4G
ESD accessories
Elabo LaboratorySystems L 188
Grounding system
Earthing module with protective resistor 1 MOhm. ESD ground connection via Schuko socket, Pushbutton 10 mm Ø for con-nection to table mat. Cable length 1.5 m.
01-4Y
Technical data Width Depth Height Order no.
Dimensions in mm
Accessories and workbenches
01-4S
Test station Width Depth Height Order no.
Complete testing sta-tion for inspecting the grounding of personnel via grounding wrist strap and cable or shoes. For mobile use, or can be used with wall mount as a stationary device.2 measuring ranges: Low < 0.9 MOhmHigh 0.9 ...100 MOhmPushbutton connections: 4.5 - 7.7 - 10.3 mmTest device complete with contact plate, wall mount and 9 V power supply unit.
Test deviceContact plateWall mount
140 x 75 x 30 400 x 300 300 x 210
Technical data
Grounding system
Earthing module EBP with 3 pushbutton con-nections with 10 mmDiameter, each with protective resistor 1 MOhm. Connection cable with 4 mm ring cable lug for connection with the ESD table frame, installation material for InForm and EcoTecSP ESD tables
01-4Z
Technical data Width Depth Height Order no.
78 x 50 x 23
ESD accessories
Elabo LaboratorySystems L 189
Accessories and workbenches Chairs
Permanent contact backrestThe permanent-contact backrest fol-lows the movements of the body and enables the natural stressing and relieving of different muscle and spi-nal areas.
Synchronous mechanismThe user-friendly synchronous and "similar" mechanism promotes the shifting between different sitting postures. The seat and the back rest track the movements of the body in synchronous fashion, the mechanism provides continuous adjustment to body weight.
Suitability for 24 h operationThe use of work station chairs in control rooms places high demands on the material quality and the wear-resistance of the cover fabric and the mechanisms. Elabo chairs for 24 h operation have been designed to cope with these loads, and are appro-priately certified.
Requirements laid down in the DIN 68877This standard defines – partially with close reference to DIN 1335 – how a chair must be constructed for fabrica-tion work, in order that it will fulfil all safety technology and ergonomic requirements: The work chair may not exhibit any places where there is danger of hands becoming stuck or crushed. All possibility of inadvertent changes to the chair adjustment while the chair is being used must be excluded. The backrest must be pendular-mounted, and adjustable in both height and angle. If the lowest setting of the seat height is less than 500 mm, then a depth springing is required for cush-ioning the impact of sitting down. The base frame must have at least five points of support. A slip-resistant climbing aid is required for chairs which have seats whose heights can be adjusted to more than 650 mm; in addition, no castors are permitted. Elabo Factory and Cleanroom swivel chairs meet this standards in all of its points.
Requirements laid down in the DIN 1335DIN EN 1335 replaces DIN 4551 of 1988 and is valid for office work chairs. Part 1 of the standard defines essen-tial minimum and maximum values which an ergonomic work chair must fulfil. Among other things, the standard contains requirements regarding seat height, seat depth, seat width, seat surface tilt, the height of the back-rest, the width of the backrest, the range of adjustment of the backrest tilt, and the position, width and length of arm supports. Part 2 of the standard prescribes the safety requirements for office work chairs. Requirements are defined with respect to design for the avoidance of places where crushing, sticking and shearing could take place as well as criteria for determining structural stability, resistance to rolling and stur-diness.The Elabo office and laboratory swivel chairs in the Basic and Highline series and the 24 h swivel chairs always keep to this standard.
Suitability for ESD protection zones IEC 61340-5-1Reliable ESD protection is ensured by means of comfortable conductive cushions, conductive castors and a dissipation resistance in the range of 106 - 108 Ohm, which enables a controlled dissipation of electrostatic charges.
Elabo LaboratorySystems L 190
Accessories and workbenches Chairs
Basic4Medium-high backrest
Basic6High backrest
Order no.S1-1WS1-1XS1-1SS1-1TS1-1CS1-1D
Swivel chair with permanent contact backrest
Continuously adjustable height setting from 420 - 510 mm through safety gas springBackrest with integrated lumbar support, backrest height adjust-ment of up to 60 mmContinuously adjustable weight regulation to a body weight of 45 and 120 kgFive-spoke base frame with double swivel castors, either for hard or soft floors, Colour: black
Armrests available as an option
Seat width: 450 mmSeat depth: 410 mmBackrest height: 430 mm
Pads Castors anthracite hard, for carpets anthracite soft, for hard floors black hard, for carpets black soft, for hard floors dark blue hard, for carpets dark blue soft, for hard floors
Order no.S1-4WS1-4XS1-4SS1-4TS1-4CS1-4D
Swivel chair with synchronous mechanism
Equipped as Basic4, butSynchronous mechanism with an opening angle between the seat and the backrest of up to a maximum of 125 degrees
Armrests available as an option
Backrest height: 530 mm
Pads Castors anthracite hard, for carpets anthracite soft, for hard floors black hard, for carpets black soft, for hard floors dark blue hard, for carpets dark blue soft, for hard floors
Elabo LaboratorySystems L 191
Accessories and workbenches Chairs
Basic4 ESDMedium-highbackrest
Basic6 ESDHighbackrest
Order no.S1-2CS1-2DS1-2QS1-2RS1-2WS1-2X
ESD swivel chair with permanent contact backrest
Conductive seat and back padsContinuously adjustable height setting from 420 - 510 mm through safety gas springBackrest with integrated lumbar support, backrest height adjust-ment of up to 60 mm Continuously adjustable weight regulation to a body weight of 45 and 120 kgAluminium five-spoke base frame with conductive double swivel castors, either for hard or soft floors, Colour: black
Seat width: 450 mmSeat depth: 410 mmBackrest height: 430 mm
Pads Castors blue hard, for soft floorsblue soft, for hard floorslight grey hard, for soft floorslight grey soft, for hard floorsblack hard, for soft floorsblack soft, for hard floors
Order no.S1-5CS1-5DS1-5QS1-5RS1-5WS1-5X
ESD swivel chair with synchronous mechanism
Equipped as Basic4 ESD, butSynchronous mechanism with an opening angle between the seat and the backrest of up to a maximum of 125 degrees
Backrest height: 530 mm
Pads Castors blue hard, for carpetsblue soft, for hard floorslight grey hard, for carpetslight grey soft, for hard floorsblack hard, for carpetsblack soft, for hard floors
Elabo LaboratorySystems L 192
Accessories and workbenches Chairs
Basic 4/6 armrests
BasicConference chair
Order no.S1-6C
Ring armrests
made of plastic,suitable for Basic 4/6 swivel chairs,can be retrofitted
black
Order no.S1-8XS1-8WS1-8TS1-8SS1-8DS1-8C
4-legged conference chair
Stackable visitor chair with a completely fabric-covered backrest, black four-foot base made of powder coated steel pipe with felt slides for hard floors, pipe diameter 25 mm, alternately available with armrests.
Seat height: 450 mmSeat width: 460 mmSeat depth: 460 mmBackrest height: 440 mmBackrest width: 470 mm
Pads Armrests anthracite yes anthracite no black yes black no dark blue yes dark blue no
Basic 8/10 armrests
Order no.S6-6A
Armrests
made of plastic, width and height-adjustablesuitable for Basic 8/10 swivel chairs,can be retrofitted
black
Elabo LaboratorySystems L 193
Accessories and workbenches Chairs
Basic8Medium-high backrest
Basic10High backrest
High quality swivel chair with synchronous mechanism
Continuously adjustable height setting from 410 - 510 mm through safety gas springBackrest with an adjustment range of 7 positions (70 mm)Variable basic setting for seat height (30 mm downward and 20 mm upward)Continuously adjustable weight regulation to a body weight of 45 and 130 kgSynchronous mechanism, opening angle between the seat and the backrest up to max. 120°.Five-spoke base frame with double swivel castors, either for hard or soft floors, Colour: black
Seat width: 460 mmSeat depth: 410-460 mmBackrest height: 430 mm
Pads Castors Order no.black hard, for carpets S6-1Wblack soft, for hard floors S6-1Xmottled black hard, for carpets S6-3Wmottled black soft, for hard floors S6-3Xdark blue hard, for carpets S6-1Cdark blue soft, for hard floors S6-1Dmottled dark blue hard, for carpets S6-3Cmottled dark blue soft, for hard floors S6-3D
also available in ESD design
High quality swivel chair with synchronous mechanism
Equipped as Basic8, but with higher backrest
Seat width: 470 mmSeat depth: 410-460 mmBackrest height: 530 mm
Pads Castors Order no.black hard, for carpets S6-4Wblack soft, for hard floors S6-4Xmottled black hard, for carpets S6-7Wmottled black soft, for hard floors S6-7Xdark blue hard, for carpets S6-4Cdark blue soft, for hard floors S6-4Dmottled dark blue hard, for carpets S6-7Cmottled dark blue soft, for hard floors S6-7D
also available in ESD design
Elabo LaboratorySystems L 194
Factorystanding aid
Order no.S3-4AS3-5A
Factory standing aid
Optimum freedom of movement due to the leaning surfaces being rotatable by 360°, made of integral foam with integrated carrying handle. height adjustment with gas spring lift, stable plate base.
Colour: anthraciteSeat height: 650 - 850 mmIncline adjustment forward: 10°
Factory standing aid, standardFactory standing aid, ESD
Accessories and workbenches Chairs
Clean16
Order no.S3-6A
Cleanroom ESD swivel chair
Ergonomically formed cushion parts with foam-injection technol-ogy with air-tight seals, conductive ESD artificial leather uphol-stery, seat support and backrest cover made of powder coated steel sheeting. Smooth, enclosed surfaces for the prevention of particle deposits, seat height adjustment with safety gas spring, permanent contact backrest, backrest height adjustment, encapsulated mechanism, five-foot base frame made of polished aluminium with conductive castors. Certified for clean-room use by the Fraunhofer-Institut IPA Stuttgart (suitable for Clean Room Class 1)
Colour: Artificial leather blackColour: Metal parts light greySeat height: 440 - 565 mmSeat width: 480 mmSeat depth: 470 mmBackrest height: 380 mm
Swivel chair ESD Clean16
LuPo
This chair is recom-mended by the Federal Association of German Back Exercise Schools. Order no.
S4-1RS4-1SS4-1TS4-1US4-1VS4-1W
Air-cushioned swivel chair with swivel castors
Seat base is made of PP with double-wall structure. The air cush-ion effect also applies. 3-D rocker mechanism towards the front, to the side and to the rear. Hard castors for soft floors. Colour of metallic parts arctic, black.Seat height: 450 - 550 mm; Seat width: 440 mm; Seat depth: 460 mm
dark red black-greydark green dark blue dolphin grey yellow-orange
Elabo LaboratorySystems L 195
Factory4
Factory8
Pads
Factory4 swivel chair
Seat and backrests aligned to your body's anatomy, made of impact and breakage-resistant plastic, easy-clean surfaces, resistant to lyes and acids, seat height adjustment with safety gas spring, rounded seat front edge to lessen pressure on legs, permanent contact backrest, integrated lumbar support, continu-ously adjustable backrest height adjustment, backrest incline adjustment, reduced backrest width, five-spoke base frame, either with sliders or rollers.
Colour: basalt greySeat height: 430 - 580 mmSeat width: 480 mmSeat depth: 430 mmBackrest height: 420 mm
With castors With sliders
Factory8 swivel chair with climbing aid
Equipped as Factory4, butextended seat height, climbing aid
Colour: basalt greySeat height: 580 - 850 mmSeat width: 480 mmSeat depth: 430 mmBackrest height: 420 mm
with climbing aid and sliders:
Luxury replaceable pad
Simple and easy hook-in installation; can be replaced or retrofit-ted at any time
Textile pad, soft and breathable, with resistant cover fabricColour: black blueIntegral foam pad for soft, 'air-cushioned sitting', washable, resistant to mild acids and lyes, structured surface for improved climatic comfort.Colour: black blue
Order no.S3-1AS3-1E
Order no. S3-1K
Order no.S3-1QS3-1R
S3-2US3-1V
Accessories and workbenches Chairs
Elabo LaboratorySystems L 196
Factory4 ESD
Factory8 ESD
ESD pad
Order no.S3-2AS3-2E
Factory4 ESD-swivel chair
Seat and backrests aligned to your body's anatomy and volume conductive, made of impact and breakage-resistant plastic, easy-clean surfaces, resistant to lyes and acids, seat height adjust-ment with safety gas spring, rounded seat front edge to lessen pressure on legs, permanent contact backrest, integrated lumbar support, continuously adjustable backrest height adjustment, backrest incline adjustment, reduced backrest width, five-spoke base frame, either with sliders or castors.Dissipation resistance pursuant to IEC 61340-5-1: 106 - 108 OhmSurface resistance (IEC 61340-5-1): 105 Ohm
Colour: blackSeat height: 430 - 580 mm; Seat width: 480 mm; Seat depth: 430 mmBackrest height: 420 mmWith ESD castors With ESD sliders
Order no.S3-2K
Factory8 ESD swivel chair with climbing aid
Equipped as Factory4 ESD, butextended seat height, climbing aid
Colour: blackSeat height: 580 - 850 mm; Seat width: 480 mm; Seat depth: 430 mmBackrest height: 420 mm
with climbing aid and ESD sliders:
Order no.S3-2Q
S3-2U
Luxury ESD replaceable pads
Simple and easy hook-in installation; can be replaced or retrofit-ted at any time
Conductive textile pad, soft and breathable,with resistant cover fabric Colour: blackConductive integral foam pad for soft, 'air-cushioned sitting', washable, resistant to mild acids and lyes, structured surface for improved climatic comfort. Colour: black
Accessories and workbenches Chairs
Elabo LaboratorySystems L 197
Accessories and workbenches
The movable wall system is perfect for separating work stations in offices and production halls, or for marking off special test stations.
1000 V
In accordance with the definition by the professional association for precision engineering and electrotechnology, these are test stations for performing frequently changing measurement and testing tasks. As a rule, series tests are not performed at such test stations. These include: labo-ratory stations, repair stations, measure-ment stations, experiment stations and calibration stations, where voltages of up to 1000 V are required.
Material
The movable wall elements are comprised of 19 mm thick, melamine resin-coated 3-layer fine chipboard and are provided with synthetic edge strips; vertical edges are surrounded with aluminium-groove profiles. A cable chamber in the alumini-um profile additionally enables the installa-tion of the movable wall elements.
The perforated grid plates on the position-ing plate or positioning column enable the positioning of the the wall elements at a grid angle ranging from 15° to 45°.
Height adjusters integrated into the alu-minium profile allow for floor unevenness.
Attractively-shaped plastic caps round off the profile at the top.
Colour
The aluminium system profiles are pow-der coated in the colour you require. All other elements are light grey.
Movable wall elements
Elabo LaboratorySystems L 198
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Technical data
Technical data
Technical data
Technical data
Technical data
Dimensions in mm
Accessories and workbenches
Movable wall element
76-7B76-7A
600 x 34 x 1600 1200 x 34 x 1600
Movable wall elements made of 19 thick chipboardWith aluminium system profile on both sides
Movable wall element
Glazed 76-7H76-7G
600 x 34 x 1600 1200 x 34 x 1600
Movable wall elements made of 19 thick, partially glazed chipboardWith aluminium system profile on both sides
Movable wall elements
Positioning column
76-7NPowder coated steel pipe with grid holes at the top and bottom for insertion of the movable wall elements
Positioning plates
76-7P 330 / 1620with positioning column, required when setting up movable wall elements in a row, positioning plates made of die-cast aluminium with grid holes for installing the movable wall elements
(To be used on every second element)
Movable wall element shelf
76-7Q 1050 x 200 x 400with 2 stable hanging hooks, support made of 19 mm thick, coated chipboard
33 / 1620
Elabo LaboratorySystems L 199
Technical data Order no.Length
InForm movable walls are connected to each other on the facing sides via the positioning column 76-7N. The perforated grid plates on the positioning column or positioning plate allow you to position the wall elements in different ways for multiple purposes.
Movable walls as shown:3 movable wall elements 6001 movable wall element 12001 movable wall element 1200, glazed2 positioning columns2 positioning plates with positioning column
For cross or angle formations, only the positioning column 76-7N is required.
76-7B76-7A76-7G76-7N76-7P
For positioning in a row, the positioning plate 76-7P with positioning column is also required - please see example order.
InForm movable walls can be used for a creative room design and also as information walls.
Order example Order no.
Accessories and workbenches
Link chain
76-7R 1000
Dimensions in mm
PVC link chainred-white for cordoning off a test station in connection with movable walls,chain with fastening hooks
Accessories for movable wall elements
Elabo LaboratorySystems L 200
Accessories and workbenches
To complete the Elabo furnishing sys-tems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials and devices.
Workbench topsWorkbenches are available with various workbench tops depending on the me-chanical requirements.
Base cabinetsThe steel plate base cabinets are available in three variants:
For suspended or floor installation under the workbench or as a separate individual element cabinet for measuring equip-ment, tools or material.
The unit is manufactured of 1.25 mm thick quality steel sheeting, all surfaces are powder coated.
The drawers run on ball-bearing pull-out racks, can be pulled out to 90%. Carrying weight 100 kg. Surrounding holes in the bottom and on the side walls enable the use of sectioning elements.
Front side of drawer with handle rail, large labelling area and colour-coded identifi-cation. Central locking via security lock, different locks in standard designs.
Base frameSturdy steel frame made of 3 transverse-running 40x40 mm square steel pipes and four longitudinal-running 40x25 mm rectangular steel pipes, powder coated in light grey (RAL 7035). The removable legs are equipped with height adjusters for compensate for floor unevenness.
Drawer dimensionsSteel cabinets:
Front height Effective height 100 mm 85 mm 200 mm 185 mm
Continuous dimensions: Effective depth 600 mmEffective width 700 mm
For unit dimensions, see selection table.
Colour: RAL 7035
Drawer dimensions for workbench base cabinets
Front height Effective height 75 mm 60 mm 100 mm 85 mm 150 mm 135 mm 200 mm 185 mm
Continuous dimensions: Effective depth 600 mmEffective width 500 mm
For unit dimensions, see selection table.
Colour: RAL 7035
Workbenches
Elabo LaboratorySystems L 201
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Technical data
Technical data
Technical data
Technical data
Technical data
Dimensions in mm
Accessories and workbenches
Table frame
Workbench SP welded steel pipe frame made of 40 x 40 and 40 x 25 mm, 4 height-adjustable table legs made of 50 x 50 mm square steel pipe, powder coated, conductive
Prepared to contain steel plate base cabinets 03-4A...G
1990 x 750 x 840 1490 x 750 x 840
E1-0AE1-0B
Multiplex plate
made of 40 mm thick, multi-layer adhesive bond work-bench plate made of beech veneer
Surface ground and painted with clear lacquer
2000 x 800 1500 x 800
E2-0AE2-0B
Beech locking plate
made of 50 mm thick beech wood, beech wood steamed for enhanced mechanical stress
Surface ground and painted with clear lacquer
2000 x 800 1500 x 800
E2-0DE2-0E
Workbenches
Universal tops
Universal workbench plate made of 50 mm thick solid-core plate and dual back-pull material for extremely high longitudinal stresses.Surface covered with PVC or linoleum, resistant to oils and fats as well as to heat up to approximately 250 degrees. All edges protected by a 3 mm thick solid timber edge.
2000 x 800 1500 x 800
E2-0GE2-0H
Made of 30 mm square steel pipe for reinforcement of the table legs under increased load
For table 2000 x 800For table 1500 x 800
E4-1NE4-1R
Stabilising strut
Elabo LaboratorySystems L 202
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Order no.Width Depth Height
Technical data
Technical data
Technical data
Technical data
Technical data
Dimensions in mm
Accessories and workbenches
03-4A 600 x 695 x 400Made of steel plate2 drawers 75 mm1 drawer 150 mm
Base cabinet
Base cabinet
Made of steel plate2 drawers 150 mm1 drawer 200 mm
600 x 695 x 600 03-4C
03-4D 600 x 695 x 600Made of steel plate2 drawers 100 mm2 drawers 150 mm
Base cabinet
Workbench base cabinets
Border
03-2G03-2H
2000 x 100 1500 x 100
18 mm thick beech wood plywood strip with rounded edges
Table foot bracket
E4-9G ZX01Z angle (2 pcs.) for engaging and fastening EcoTecSP work tables to the floor
Colour: black
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Width Depth Height Order no.
Dimensions in mm
Elabo LaboratorySystems L 203
Accessories and workbenches
Rollboy
Rollboy
Base cabinet
Base cabinet
Made of steel plate2 drawers 150 mm2 drawers 200 mm
600 x 695 x 800 03-4F
03-4G 600 x 695 x 800Made of steel plate2 drawers 100 mm2 drawers 150 mm1 drawer 200 mm
As described above2 drawers 75 mm1 drawer 150 mm1 drawer 200 mm
600 x 695 x 750 03-4K
03-4L 600 x 695 x 950As described above2 drawers 100 mm2 drawers 150 mm1 drawer 200 mm
The mobile rollboys are manufactured with the same construction as the steel sheeting base cabinets. In addition, a drawer stop has been integrated: only one drawer may be pulled out at a time. Cover with chrome-plated bumpers constructed as edging strips, upper side of cover covered with grooved rubber. Complete with 2 fixed castors and 2 swivel castors with 100 mm diameter, 2 of which with fixing brake. Loading capacity: 400 kg.
Workbench base cabinets, rollboys
Elabo LaboratorySystems L 204
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Width Depth Height Order no.
Accessories and workbenches
Steel cabinet
Steel cabinet as side cabinetDesign as for workbench base cabinets, but with individual drawer lock.9 drawers 100 mmDrawer inner dimensions:W = 700 mmD = 600 mm
800 x 695 x 1000 03-5A
03-5B 800 x 695 x 1000Steel cabinet as side cabinetDesign as for workbench base cabinets, but with individual drawer lock.5 drawers 100 mm2 drawers 200 mmDrawer inner dimensions:W = 700 mmD = 600 mm
Steel cabinet
Hexagonal workbench
Tabletop made of a multi-layer, glued multiplex beech wood plate; bevelled edges ground on all sides. Surface treated with linseed oil. Material thickness 40 mm. 6 blocks of drawers are in-stalled underneath Type 03-4G:2 drawers 100 mm2 drawers 150 mm1 drawer 200 mm
2491 x 2164 x 840 03-6A
Dimensions in mm
The steel accessory cabinets are constructed the same way as the workbench base cabinets. They differ in that the clear drawer width is 700 mm. Stationary assembly workplaces can also be constructed in combination with a table top.
Steel cabinets, hexagonal workbench
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Width Depth Height Order no.
Dimensions in mm
Elabo LaboratorySystems L 205
Accessories and workbenches
Foam rubber
Tray inserts
Insert boxes
Longitudinal/transverse partitions
03-4P 500 x 600Insert for all drawer heights, suitable
for drawer height 75 mm 8 Tray inserts 2-part, 73 mm 4 Tray inserts 2-part, 48 mm 4 Tray inserts 4-part, 36 mm 8 partitions 2-part, 73 mm16 partitions 3-part, 48 mm16 partitions 4-part, 36 mm
03-4Q
03-4R
03-4S
100 x 100 x 55 100 x 200 x 55
100 x 100 x 88 100 x 200 x 88
Made of plastic
for drawer height 75 mm 6 insert boxes 12 insert boxes
for drawer height 100 mm 6 insert boxes12 insert boxes
Made of zinc-coated steel plate
for drawer height 100 mm 4 longitudinal partitions10 transverse partitions 100
03-4T
The drawers for the workbench base cabinets and rollboys can be organized throughout by means of the surrounding perforations. Drawer interior dimensions: W = 500 mm, D = 600 mm. The division elements are available for the drawer heights 75 / 100 / 150 and 200 mm.
Organisation elements, base cabinet drawers
Elabo LaboratorySystems L 206
Technical data Order no.
Technical data Order no.
Accessories and workbenches
Longitudinal/transverse partitions
Made of zinc-coated steel plate
for drawer height 150 mm 4 longitudinal partitions10 transverse partitions
100/150
03-4U
03-4VMade of zinc-coated steel plate
for drawer height 200 mm1 longitudinal partition2 transverse partitions
200/250
Longitudinal/transverse partitions
Organisation elements, base cabinet drawers
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Width Depth Height Order no.
Dimensions in mm
Elabo LaboratorySystems L 207
Accessories and workbenches
Foam rubber
03-5P 700 x 600 x 4InsertsSuitable for all drawer heights
Insert boxes
03-5S
100 x 100 x 88 100 x 200 x 88
Made of plasticfor drawer height 100 mm18 insert boxes12 insert boxes
Longitudinal/ transverse partitions
03-5TMade of zinc-coated steel platefor drawer height 100 mm3 longitudinal partitions2 transverse partitions
100/1006 transverse partitions
100/200
Longitudinal/ transverse partitions
03-5VMade of zinc-coated steel platefor drawer height 200 mm3 longitudinal partitions2 transverse partitions
100/2006 transverse partitions
200/200
The drawers of the floor-mounted steel drawer cabinet are wider than those in the steel base cabinets, the clear interior dimensions of the drawers are W = 700 mm, D = 600 mm. The corresponding divisions are listed in the following.
Organisation elements, steel cabinet drawers
Dimensions in mm
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Elabo LaboratorySystems L 208
Accessories and workbenches
Shelf support
Brace 03-7C
03-7D
32 x 500 x 2000Steel shelf support with equal-iser bars
Diagonal brace 1 x required for basic shelf unit and1 x for each attached shelf unit
Standard shelf dimensions: 1064 x 500 x 2000 mmAttached shelf unit dimensions:1032 x 500 x 2000 mm
Side and rear wall,
Plinth 03-7E
03-7F
03-7G
32 x 500 x 2000
1000 x 1.5 x 2000
1000 x 1.5 x 50
Shelf side wall with integrated steel shelf support, type 03-7C
Shelf rear wall
Steel plate plinth as front panelling
Steel plate shelf
03-7H
03-7J
1000 x 500 x 29
1000 x 500 x 29
adjustable in 25 mm grid, capacity 115 kg,Field load max. 1300 kg,Powder coated
As above but zinc-coated
Steel plate drawers
03-7K 1000 x 500 x 100
Steel plate individual drawer with ball bearing guides,Load capacity 100 kg
The Elabo steel shelves can be extended as individual elements or in connection with the mounted parts into complete storage sys-tems. The side support frames with insertable horizontal crossbars are made of a sturdy steel U profile. The shelves and drawers can be inserted into the 25 mm grid. In the same way, the shelves can be panelled with the side or rear wall elements. We can also provide a plinth for the front. All steel elements are powder coated in light grey (RAL 7035).
Storage shelf
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Order no.Width Depth Height
Technical data Width Depth Height Order no.
Dimensions in mm
Elabo LaboratorySystems L 209
Accessories and workbenches
Steel shelf units
2 steel shelf supports 1 diagonal brace5 coated shelves
2 Steel shelf supports with crossbars
1 diagonal brace1 steel plate individual drawer4 coated shelves
1064 x 500 x 2000
1064 x 500 x 2000
03-7Q
03-7S
Steel shelf units
with side walls 2 Shelf side walls inc. steel shelf supports
1 rear wall1 plinth5 coated shelves
1064 x 500 x 2000 03-7R
Steel cabinet
Double-wing door steel cabinet made of 1.25 mm thick steel sheeting, RAL 7035 pow-der coated, 4 height-adjustable galvanized shelves, 25 mm hook-on grid, load-bearing capacity 100 kg, twist handle with security lock
1000 x 400 x 1950 03-7A
Shelf trolleys
made of bent steel pipe 30x30x2 mm, lower frame 40x20x2 mm with welded-in cross-sheets, four rub-ber casters, 125 mm in diameter, light grey, powder coated
with 1 bottom plate and 4 removable shelves made of 19 mm flat laminate, melamine resin-coated with 2 mm PP edge stripESD design
Design as above, but with 2 removable shelvesESD design
1110 x 645 x 1660
1110 x 645 x 1010
03-8A
01-5X
03-8B
01-5Y
Steel cabinets supplement the shelf systems in the storage logistics. Material, measuring equipment and tools can thus be stored dust-free in a locked environment.The mobile shelf trolleys are ideal for swift transport of materials to Incoming goods, Warehouses or Production.
Storage shelf, steel cabinet, shelf trolley
Elabo LaboratorySystems L 210
0101-4A P. 19101-4B P. 19101-4C P. 19101-4E P. 19001-4F P. 19101-4G P. 19101-4L P. 18901-4N P. 19101-4P P. 19101-4Q P. 19101-4S P. 19201-4U P. 18901-4V P. 18901-4W P. 18901-4X P. 19101-4Y P. 19201-4Z P. 19201-5F P. 15501-5G P. 15501-5R P. 15501-5S P. 15501-5T P. 15501-5U P. 14301-5V P. 14301-5X P. 20801-5Y P. 20801-6A P. 14301-6C P. 14301-6S P. 14301-6U P. 14301-6T P. 14301-6V P. 14301-8S P. 13101-8R P. 131
0303-2G P. 20603-2H P. 20603-4A P. 20603-4C P. 20603-4D P. 20603-4F P. 20703-4G P. 20703-4K P. 20703-4L P. 20703-4P P. 20903-4Q P. 20903-4R P. 20903-4S P. 20903-4T P. 20903-4U P. 21003-4V P. 21003-5A P. 20803-5B P. 20803-5P P. 21103-5S P. 21103-5T P. 21103-5V P. 21103-6A P. 20803-7A P. 20803-7C P. 21203-7D P. 21203-7E P. 21203-7F P. 21203-7G P. 21203-7H P. 21203-7J P. 21203-7K P. 21203-7Q P. 21303-7R P. 21303-7S P. 21303-8A P. 213
03-8B P. 213
0707-1A P. 16107-1B P. 16107-1C P. 16107-1D P. 16107-1E P. 16107-1F P. 16107-1G P. 16107-1H P. 16107-1JZ P. 16207-1KZ P. 16207-1LZ P. 16207-1MZ P. 16207-1P P. 16407-1Q P. 16207-1RZ P. 16207-1V P. 16307-1W P. 16307-1X P. 16307-2A P. 16407-2B P. 16407-2C P. 16407-2D P. 16407-2E P. 16507-2F P. 16507-2L P. 16407-2M P. 16407-2P P. 16407-2Q P. 16507-2R P. 16507-2S P. 16507-2U P. 16407-2W P. 16407-4A P. 17607-4B P. 17607-4CZ P. 17607-4DZ P. 17607-4E P. 17707-4G P. 17707-4J P. 17707-4L P. 17607-4M P. 17607-4N P. 17607-4P P. 17607-4Q P. 17807-4R P. 17807-4S P. 17807-4T P. 17807-7A P. 17907-7B P. 17907-7C P. 17907-7D P. 17907-7E P. 17907-7F P. 17907-7G P. 17907-7H P. 17907-7J P. 4207-7K P. 4207-7L P. 4207-7M P. 4207-7N P. 4207-7P P. 4307-7Q P. 4307-7R P. 4307-7S P. 4307-7T P. 4307-8A P. 4407-8B P. 4407-8C P. 4407-8D P. 4407-8E P. 44
07-8F P. 4507-8G P. 4507-9A P. 4307-9B P. 4307-9C P. 16607-9D P. 16607-9E P. 16407-9KZ P. 16607-9M P. 16607-9N P. 16607-9Q P. 16507-9T Z P. 163
0808-1A P. 13308-1B P. 13308-1C P. 13308-1D P. 13308-2A P. 16908-2B P. 16908-2C P. 16908-2D P. 16908-2E P. 17008-2F P. 17008-2G P. 17008-2H P. 17008-2J P. 17108-2K P. 17108-2M P. 17108-2N P. 17108-2P P. 17108-2R P. 17108-2S P. 17108-2T P. 17108-2U P. 17108-2V P. 17108-2W P. 17108-2Q P. 16908-3A P. 16908-3B P. 16908-3C P. 16908-3E P. 17008-3F P. 17008-3G P. 17008-3H P. 17008-4A P. 17208-4B P. 17208-4C P. 17208-4E P. 17208-4F P. 17208-4G P. 17208-4K P. 17208-4L P. 17208-4M P. 17208-4R P. 17208-4S P. 17208-4T P. 17208-4U P. 16908-4V P. 16908-4X P. 17208-5A P. 17208-5B P. 17208-5C P. 17208-5D P. 17208-5E P. 172
0909-2A P. 18309-2B P. 18309-2C P. 18309-2D P. 18309-2E P. 184
09-2F P. 18409-2G P. 18409-2H P. 18409-2J P. 18509-2K P. 18509-2P P. 18309-2R P. 18509-2S P. 18509-2T P. 18509-2U P. 18509-2V P. 18509-2W P. 18509-3A P. 18309-3B P. 18309-3C P. 18309-3E P. 18409-3F P. 18409-3G P. 18409-3H P. 18409-4A P. 18609-4B P. 18609-4C P. 18609-4E P. 18609-4F P. 18609-4G P. 18609-4K P. 18609-4L P. 18609-4M P. 18609-4R P. 18609-4S P. 18609-4T P. 18609-4U P. 18309-4V P. 18309-4X P. 18309-5A P. 18609-5B P. 18609-5C P. 18609-5D P. 18609-5E P. 18609-7A P. 18709-7B P. 18709-7C P. 18709-7E P. 18709-7F P. 18709-7G P. 18709-8B P. 18709-8C P. 18709-8F P. 18709-8G P. 187
3030-0A P. 14830-0B P. 14830-0C P. 14830-0D P. 14830-0E P. 14830-0F P. 14930-0G P. 14830-0H P. 14830-0M P. 14830-0N P. 14830-0Q P. 14830-0R P. 15130-0S P. 15130-0T P. 15130-0U P. 15130-0V P. 15130-0W P. 15130-0X P. 15130-0Y P. 15130-2A P. 14930-2B P. 14930-2C P. 149
30-3D P. 14930-3E P. 14930-3F P. 14930-3G P. 14930-7A P. 14830-7B P. 14830-7C P. 14830-7G P. 14830-7H P. 148
4040-0A P. 14640-0B P. 14640-0C P. 14640-0D P. 14640-0E P. 14640-0K P. 14640-0Y P. 14640-4A P. 14440-4B P. 14440-4C P. 14440-4D P. 14440-4Y P. 144
5050-0A P. 15350-0B P. 15350-0C P. 15350-0D P. 15350-0G P. 15350-0N P. 15350-1A P. 15450-1B P. 15450-1C P. 15450-1D P. 15450-1G P. 15450-1N P. 154
7070- ZR1 P. 3370- ZR2 P. 3370- ZV1 P. 3370- ZV3 P. 3470-1A ZC1 P. 2570-1A ZC1F P. 2570-1A ZC1S P. 2570-1A ZC3-1FQ P. 2770-1A ZC3-1Q P. 2770-1A ZC3-1SQ P. 2770-1A ZFU P. 2370-1A ZSU P. 2370-1A ZU P. 2370-1B ZC1 P. 2570-1B ZC1F P. 2570-1B ZC1S P. 2570-1B ZC3-1FQ P. 2770-1B ZC3-1Q P. 2770-1B ZC3-1SQ P. 2770-1B ZFU P. 2370-1B ZSU P. 2370-1B ZU P. 2370-1C ZC1 P. 2570-1C ZC1F P. 2570-1C ZC1S P. 2570-1C ZC3-1FQ P. 2770-1C ZC3-1Q P. 2770-1C ZC3-1SQ P. 2770-1C ZFU P. 2370-1C ZSU P. 2370-1C ZU P. 2370-1D ZC1 P. 2570-1D ZC1F P. 2570-1D ZC1S P. 25
Article number search key
Elabo LaboratorySystems L 211
70-1D ZC3-1FQ P. 2770-1D ZC3-1Q P. 2770-1D ZC3-1SQ P. 2770-1D ZFU P. 2370-1D ZSU P. 2370-1D ZU P. 2370-1G ZC1 P. 2570-1G ZC1F P. 2570-1G ZC1S P. 2570-1G ZC3-1FQ P. 2770-1G ZC3-1Q P. 2770-1G ZC3-1SQ P. 2770-1G ZFU P. 2370-1G ZSU P. 2370-1G ZU P. 2370-1J ZF P. 3170-1J ZS P. 3170-1J P. 3170-1K ZFU P. 2870-1K ZSU P. 2870-1K ZU P. 2870-1L ZFU P. 2870-1L ZSU P. 2870-1L ZU P. 2870-1M ZU P. 2870-1M ZFU P. 2870-1M ZSU P. 2870-1N ZFU P. 2970-1N ZSU P. 2970-1N ZU P. 2970-1P ZFU P. 2970-1P ZU P. 2970-1P ZSU P. 2970-1Q ZFU P. 2970-1Q ZSU P. 2970-1Q ZU P. 2970-1R ZFU P. 2970-1R ZSU P. 2970-1R ZU P. 2970-1S ZF P. 2970-1S ZS P. 2970-1S P. 2970-1U ZFU P. 10370-1U ZSU P. 10370-1U P. 10370-1V ZF P. 10370-1V ZS P. 10370-1V P. 10370-2A ZC1 P. 2570-2A ZC1F P. 2570-2A ZC1S P. 2570-2A ZC3-1FQ P. 2770-2A ZC3-1Q P. 2770-2A ZC3-1SQ P. 2770-2A ZFU P. 2370-2A ZSU P. 2370-2A ZU P. 2370-2B ZC1 P. 2570-2B ZC1F P. 2570-2B ZC1S P. 2570-2B ZC3-1FQ P. 2770-2B ZC3-1Q P. 2770-2B ZC3-1SQ P. 2770-2B ZFU P. 2370-2B ZSU P. 2370-2B ZU P. 2370-2C ZC1 P. 2570-2C ZC1F P. 2570-2C ZC1S P. 2570-2C ZC3-1FQ P. 2770-2C ZC3-1Q P. 2770-2C ZC3-1SQ P. 2770-2C ZFU P. 23
70-2C ZSU P. 2370-2C ZU P. 2370-2D ZC1 P. 2570-2D ZC1F P. 2570-2D ZC1S P. 2570-2D ZC3-1FQ P. 2770-2D ZC3-1Q P. 2770-2D ZC3-1SQ P. 2770-2D ZFU P. 2370-2D ZSU P. 2370-2D ZU P. 2370-2G ZC1 P. 2570-2G ZC1F P. 2570-2G ZC1S P. 2570-2G ZC3-1FQ P. 2770-2G ZC3-1Q P. 2770-2G ZC3-1SQ P. 2770-2G ZFU P. 2370-2G ZSU P. 2370-2G ZU P. 2370-2J ZF P. 3170-2J ZS P. 3170-2J P. 3170-2K ZFU P. 2870-2K ZSU P. 2870-2K ZU P. 2870-2L ZFU P. 2870-2L ZSU P. 2870-2L ZU P. 2870-2M ZSU P. 2870-2M ZFU P. 2870-2M ZU P. 2870-2N ZFU P. 2970-2N ZSU P. 2970-2N ZU P. 2970-2P ZFU P. 2970-2P ZSU P. 2970-2P ZU P. 2970-2Q ZFU P. 2970-2Q ZSU P. 2970-2Q ZU P. 2970-2R ZFU P. 2970-2R ZSU P. 2970-2R ZU P. 2970-2S ZA P. 2970-2S ZF P. 2970-2S P. 2970-2U ZF P. 10370-2U ZS P. 10370-2U P. 10370-2V ZF P. 10370-2V ZS P. 10370-2V P. 10370-3A ZC1 P. 2570-3A ZC1F P. 2570-3A ZC1S P. 2570-3A ZC3-1FQ P. 2770-3A ZC3-1Q P. 2770-3A ZC3-1SQ P. 2770-3A ZFU P. 2370-3A ZSU P. 2370-3A ZU P. 2370-3B ZC1 P. 2570-3B ZC1F P. 2570-3B ZC1S P. 2570-3B ZC3-1FQ P. 2770-3B ZC3-1Q P. 2770-3B ZC3-1SQ P. 2770-3B ZFU P. 2370-3B ZSU P. 2370-3B ZU P. 2370-3C ZC1 P. 2570-3C ZC1F P. 25
70-3C ZC1S P. 2570-3C ZC3-1FQ P. 2770-3C ZC3-1Q P. 2770-3C ZC3-1SQ P. 2770-3C ZFU P. 2370-3C ZSU P. 2370-3C ZU P. 2370-3D ZC1 P. 2570-3D ZC1F P. 2570-3D ZC1S P. 2570-3D ZC3-1FQ P. 2770-3D ZC3-1Q P. 2770-3D ZC3-1SQ P. 2770-3D ZFU P. 2370-3D ZSU P. 2370-3D ZU P. 2370-3G ZC1 P. 2570-3G ZC1F P. 2570-3G ZC1S P. 2570-3G ZC3-1FQ P. 2770-3G ZC3-1Q P. 2770-3G ZC3-1SQ P. 2770-3G ZFU P. 2370-3G ZSU P. 2370-3G ZU P. 2370-3J ZF P. 3170-3J ZS P. 3170-3J P. 3170-3K ZFU P. 2870-3K ZSU P. 2870-3K ZU P. 2870-3L ZFU P. 2870-3L ZSU P. 2870-3L ZU P. 2870-3M ZU P. 2870-3M ZFU P. 2870-3M ZSU P. 2870-3N ZFU P. 2970-3N ZSU P. 2970-3N ZU P. 2970-3P ZFU P. 2970-3P ZSU P. 2970-3P ZU P. 2970-3Q ZFU P. 2970-3Q ZSU P. 2970-3Q ZU P. 2970-3R ZFU P. 2970-3R ZSU P. 2970-3R ZU P. 2970-3S ZF P. 2970-3S ZS P. 2970-3S P. 2970-3U ZF P. 10370-3U ZS P. 10370-3U P. 10370-3V ZF P. 10370-3V ZS P. 10370-3V P. 10370-4A ZC1 P. 2570-4A ZC1F P. 2570-4A ZC1S P. 2570-4A ZC3-1FQ P. 2770-4A ZC3-1Q P. 2770-4A ZC3-1SQ P. 2770-4A ZFU P. 2370-4A ZSU P. 2370-4A ZU P. 2370-4B ZC1 P. 2570-4B ZC1F P. 2570-4B ZC1S P. 2570-4B ZC3-1FQ P. 2770-4B ZC3-1Q P. 2770-4B ZC3-1SQ P. 27
70-4B ZFU P. 2370-4B ZSU P. 2370-4B ZU P. 2370-4C ZC1 P. 2570-4C ZC1F P. 2570-4C ZC1S P. 2570-4C ZC3-1FQ P. 2770-4C ZC3-1Q P. 2770-4C ZC3-1SQ P. 2770-4C ZFU P. 2370-4C ZSU P. 2370-4C ZU P. 2370-4D ZC1 P. 2570-4D ZC1F P. 2570-4D ZC1S P. 2570-4D ZC3-1FQ P. 2770-4D ZC3-1Q P. 2770-4D ZC3-1SQ P. 2770-4D ZFU P. 2370-4D ZSU P. 2370-4D ZU P. 2370-4G ZC1 P. 2570-4G ZC1F P. 2570-4G ZC1S P. 2570-4G ZC3-1FQ P. 2770-4G ZC3-1Q P. 2770-4G ZC3-1SQ P. 2770-4G ZFU P. 2370-4G ZSU P. 2370-4G ZU P. 2370-4J ZF P. 3170-4J ZS P. 3170-4J P. 3170-4K ZFU P. 2870-4K ZSU P. 2870-4K ZU P. 2870-4L ZFU P. 2870-4L ZSU P. 2870-4L ZU P. 2870-4M ZFU P. 2870-4M ZSU P. 2870-4M ZU P. 2870-4N ZFU P. 2970-4N ZSU P. 2970-4N ZU P. 2970-4P ZFU P. 2970-4P ZSU P. 2970-4P ZU P. 2970-4Q ZFU P. 2970-4Q ZSU P. 2970-4Q ZU P. 2970-4R ZFU P. 2970-4R ZSU P. 2970-4R ZU P. 2970-4S ZF P. 2970-4S ZS P. 2970-4S P. 2970-4U ZF P. 10370-4U ZS P. 10370-4U P. 10370-4V ZF P. 10370-4V ZS P. 10370-4V P. 10370-5A ZC1 P. 2570-5A ZC1F P. 2570-5A ZC1S P. 2570-5A ZC3-1FQ P. 2770-5A ZC3-1Q P. 2770-5A ZC3-1SQ P. 2770-5A ZFU P. 2370-5A ZSU P. 2370-5A ZU P. 2370-5B ZC1 P. 25
70-5B ZC1F P. 2570-5B ZC1S P. 2570-5B ZC3-1FQ P. 2770-5B ZC3-1Q P. 2770-5B ZC3-1SQ P. 2770-5B ZFU P. 2370-5B ZSU P. 2370-5B ZU P. 2370-5C ZC1 P. 2570-5C ZC1F P. 2570-5C ZC1S P. 2570-5C ZC3-1FQ P. 2770-5C ZC3-1Q P. 2770-5C ZC3-1SQ P. 2770-5C ZFU P. 2370-5C ZSU P. 2370-5C ZU P. 2370-5D ZC1 P. 2570-5D ZC1F P. 2570-5D ZC1S P. 2570-5D ZC3-1FQ P. 2770-5D ZC3-1Q P. 2770-5D ZC3-1SQ P. 2770-5D ZFU P. 2370-5D ZSU P. 2370-5D ZU P. 2370-5G ZC1 P. 2570-5G ZC1F P. 2570-5G ZC1S P. 2570-5G ZC3-1FQ P. 2770-5G ZC3-1Q P. 2770-5G ZC3-1SQ P. 2770-5G ZFU P. 2370-5G ZSU P. 2370-5G ZU P. 2370-5J ZF P. 3170-5J ZS P. 3170-5J P. 3170-5K ZFU P. 2870-5K ZSU P. 2870-5K ZU P. 2870-5L ZFU P. 2870-5L ZSU P. 2870-5L ZU P. 2870-5M ZFU P. 28 70-5M ZSU P. 2870-5M ZU P. 2870-5N ZFU P. 2970-5N ZSU P. 29 70-5N ZU P. 2970-5P ZFU P. 2970-5P ZSU P. 2970-5P ZU P. 2970-5Q ZFU P. 2970-5Q ZSU P. 2970-5Q ZU P. 2970-5R ZFU P. 2970-5R ZSU P. 2970-5R ZU P. 2970-5S ZF P. 2970-5S ZS P. 2970-5S P. 2970-5U ZF P. 10370-5U ZS P. 10370-5U P. 10370-5V ZF P. 10370-5V ZS P. 10370-5V P. 10370-6A ZFU P. 3070-6A ZSU P. 3070-6A ZU P. 3070-6C ZFU P. 3070-6C ZSU P. 30
Article number search key
Elabo LaboratorySystems L 212
70-6C ZU P. 3070-6D ZFU P. 3070-6D ZSU P. 3070-6D ZU P. 3070-6F ZFU P. 3070-6F ZSU P. 3070-6F ZU P. 3070-6G ZFU P. 3070-6G ZSU P. 3070-6G ZU P. 3070-6J ZFU P. 3070-6J ZSU P. 3070-6J ZU P. 3070-6K ZFU P. 3070-6K ZSU P. 3070-6K ZU P. 3070-6M ZFU P. 3070-6M ZSU P. 3070-6M ZU P. 3070-6P ZFU P. 3070-6P ZSU P. 3070-6P ZU P. 3070-6Q ZFU P. 3070-6Q ZSU P. 3070-6Q ZU P. 3070-6R ZFU P. 3070-6R ZSU P. 3070-6R ZU P. 3070-6S ZF P. 3070-6S ZS P. 3070-7A P. 3270-7B P. 3270-7C P. 3270-8A P. 3670-8B P. 3670-8C P. 3670-8D P. 3670-8G P. 3670-8J P. 10370-8K P. 10370-8M P. 10370-8N P. 10370-8P P. 10370-8Q P. 10370-9A ZC1 P. 2570-9A ZC1F P. 2570-9A ZC1S P. 2570-9A ZC3-1FQ P. 2770-9A ZC3-1Q P. 2770-9A ZC3-1SQ P. 2770-9A ZFU P. 2370-9A ZSU P. 2370-9A ZU P. 2370-9B ZC1 P. 2570-9B ZC1F P. 2570-9B ZC1S P. 2570-9B ZC3-1FQ P. 2770-9B ZC3-1Q P. 2770-9B ZC3-1SQ P. 2770-9B ZFU P. 2370-9B ZSU P. 2370-9B ZU P. 2370-9C ZC1 P. 2570-9C ZC1F P. 2570-9C ZC1S P. 2570-9C ZC3-1FQ P. 2770-9C ZC3-1Q P. 2770-9C ZC3-1SQ P. 2770-9C ZFU P. 2370-9C ZSU P. 2370-9C ZU P. 2370-9D ZC1 P. 2570-9D ZC1F P. 25
70-9D ZC1S P. 2570-9D ZC3-1FQ P. 2770-9D ZC3-1Q P. 2770-9D ZC3-1SQ P. 2770-9D ZFU P. 2370-9D ZSU P. 2370-9D ZU P. 2370-9G ZC1 P. 2570-9G ZC1F P. 2570-9G ZC1S P. 2570-9G ZC3-1FQ P. 2770-9G ZC3-1Q P. 2770-9G ZC3-1SQ P. 2770-9G ZFU P. 2370-9G ZSU P. 2370-9G ZU P. 2370-9J ZF P. 3170-9J ZS P. 3170-9J P. 3170-9K ZFU P. 2870-9K ZSU P. 2870-9K ZU P. 2870-9L ZFU P. 2870-9L ZSU P. 2870-9L ZU P. 2870-9M ZFU P. 2870-9M ZSU P. 2870-9M ZU P. 2870-9N ZFU P. 2970-9N ZSU P. 2970-9N ZU P. 2970-9P ZFU P. 2970-9P ZSU P. 2970-9P ZU P. 2970-9Q ZFU P. 2970-9Q ZSU P. 2970-9Q ZU P. 2970-9R ZFU P. 2970-9R ZSU P. 2970-9R ZU P. 2970-9S ZF P. 2970-9S ZS P. 2970-9S P. 2970-9U ZF P. 10370-9U ZS P. 10370-9U P. 10370-9V ZF P. 10370-9V ZS P. 10370-9V P. 103
7171-1A P. 4071-1C P. 3971-1E P. 3971-1F P. 3971-1J P. 3971-1L P. 4071-1M P. 4071-1N P. 4071-1R P. 4171-1S P. 4171-1T P. 4171-1U P. 4171-2A P. 4071-2C P. 3971-2E P. 3971-2F P. 3971-2J P. 3971-2L P. 4071-2M P. 4071-2N P. 4071-2R P. 4171-2S P. 41
71-2T P. 4171-2U P. 4171-4A P. 4071-4C P. 3971-4E P. 3971-4F P. 3971-4J P. 3971-4L P. 4071-4M P. 4071-4N P. 4071-4R P. 4171-4S P. 4171-4T P. 4171-4U P. 4171-5A P. 4071-5C P. 3971-5E P. 3971-5F P. 3971-5J P. 4071-5L P. 4071-5M P. 4071-5N P. 4071-5R P. 4171-5S P. 4171-5T P. 4171-5U P. 4171-9A ZU P. 3071-9A ZFU P. 3071-9A ZSU P. 3071-9C ZFU P. 3071-9C ZSU P. 3071-9C ZU P. 3071-9D ZFU P. 3071-9D ZSU P. 3071-9D ZU P. 3071-9F ZFU P. 3071-9F ZSU P. 3071-9F ZU P. 3071-9G ZFU P. 3071-9G ZSU P. 3071-9G ZU P. 3071-9J ZFU P. 3071-9J ZSU P. 3071-9J ZU P. 3071-9K ZFU P. 3071-9K ZSU P. 3071-9K ZU P. 3071-9M ZFU P. 3071-9M ZSU P. 3071-9M ZU P. 3071-9P ZFU P. 3071-9P ZSU P. 3071-9P ZU P. 3071-9Q ZFU P. 3071-9Q ZSU P. 3071-9Q ZU P. 3071-9R ZFU P. 3071-9R ZSU P. 3071-9R ZU P. 3071-9S P. 3071-9S ZF P. 3071-9S ZS P. 30
7373-1A P. 4773-1B P. 4773-1C P. 4773-1D P. 4773-1E P. 4773-1F P. 4873-1G P. 4873-1J P. 4873-2A P. 47
73-2B P. 4773-2C P. 4773-2F P. 4873-2G P. 4873-2J P. 4873-3A P. 4773-3B P. 4773-3C P. 4773-3D P. 4773-3E P. 4873-3F P. 4873-3G P. 4873-3H P. 4873-3J P. 4873-3K P. 4873-3L P. 4773-3M P. 4773-3N P. 4773-3P P. 4773-3Q P. 4873-3R P. 4873-3T P. 4873-3U P. 4873-3V P. 4873-3W P. 4873-4A P. 4973-4E ZMR600 P. 4973-4E ZMR800 P. 4973-4E P. 4973-4K Z01 P. 4973-4K P. 4973-4L Z01 P. 4973-4L P. 4973-4P P. 4973-5A P. 5673-5B P. 5673-5C P. 5673-5D P. 5673-5G P. 5673-5L P. 5773-5M P. 5773-5N P. 5773-5L ZSE P. 7073-5M ZSE P. 7073-5N ZSE P. 7073-6A P. 5673-6B P. 5673-6C P. 5673-6D P. 5673-6G P. 5673-6L P. 5773-6M P. 5773-6N P. 5773-6L ZSE P. 7073-6M ZSE P. 7073-6N ZSE P. 7073-7A P. 5673-7B P. 5673-7C P. 5673-7D P. 5673-7G P. 5673-7L P. 5773-7M P. 5773-7N P. 5773-7L ZSE P. 7073-7M ZSE P. 7073-7N ZSE P. 7073-7Q P. 6973-7R P. 6973-7S P. 6973-7T P. 6973-7V P. 69
7474-2A P. 5674-2A Z01 P. 6074-2B P. 5674-2B Z01 P. 6074-2C P. 5674-2C Z01 P. 6074-2D P. 5674-2D Z01 P. 6074-2G P. 5674-2G Z01 P. 6074-2L P. 5774-2M P. 5774-2N P. 5774-2X P. 5674-2X ZH707 P. 6074-4A P. 6274-4B P. 6274-4C P. 6274-4D P. 6274-4G P. 6274-4L P. 6374-4N P. 6374-4M P. 6374-4X P. 6274-6A P. 6774-6B P. 6774-6C P. 6774-6D P. 6774-6G P. 6774-6H P. 6774-6J P. 6774-6K P. 6774-6L P. 6774-6M P. 6774-6N P. 6774-6P P. 6774-6Q P. 6774-6R P. 6774-6S P. 6774-6X P. 6774-6X ZH843 P. 6774-7A P. 6974-7B P. 6974-7C P. 6974-7D P. 6974-7G P. 6974-7L P. 7074-7M P. 7074-7N P. 7074-7L ZSE P. 7074-7M ZSE P. 7074-7N ZSE P. 7074-7X P. 6974-8A P. 6974-8B P. 6974-8C P. 6974-8D P. 6974-8G P. 6974-8L P. 7074-8M P. 7074-8N P. 7074-8L ZSE P. 7074-8M ZSE P. 7074-8N ZSE P. 70
7575-1A P. 7875-1B P. 7875-1C P. 7875-1D P. 7875-1G P. 7875-1M P. 80
Article number search key
Elabo LaboratorySystems L 213
75-1Q P. 10075-1R P. 8075-1T P. 7875-1U P. 7875-1V P. 7875-1W P. 7875-2A P. 8275-2A Z007 P. 8275-2B P. 8275-2B Z007 P. 8275-2C P. 8275-2C Z007 P. 8275-2D P. 8275-2D Z007 P. 8275-2G P. 8275-2G Z007 P. 8275-2X P. 8275-3H P. 5275-3K P. 5275-3L P. 5275-3M P. 5275-3N P. 5275-4A P. 5475-4B P. 5475-4C P. 5475-4D P. 5475-4E P. 5475-4G P. 5475-5A P. 5875-5B P. 5875-5C P. 5875-5D P. 5875-5E P. 5875-5F P. 5875-5G P. 5875-5H P. 5875-5J P. 5875-5K P. 5875-5P P. 5975-5Q ZB1200 P. 5875-5Q ZB1500 P. 5875-5Q ZB1600 P. 5875-5Q ZB1800 P. 5875-5Q ZB2000 P. 5875-5R P. 5875-5S 1200 P. 9575-5S 1500 P. 9575-5S 1600 P. 9575-5S 1800 P. 9575-5S 2000 P. 9575-5T P. 9575-6A P. 7275-6B P. 7275-6C P. 7275-6D P. 7275-6G P. 7275-6L P. 7275-6M P. 7275-6N P. 7275-6P P. 9975-6Q P. 7275-7A P. 7275-7B P. 7275-7C P. 7275-7D P. 7275-7G P. 7275-7L P. 7275-7M P. 7275-7N P. 7275-7Q P. 7275-8L P. 5975-8P ZH440 P. 6075-8Q P. 34
75-8Q ZH530 P. 6075-8R P. 3575-9A P. 75
7676-1A P. 8376-1B P. 8376-1C P. 8376-1D P. 8476-1DZ01 P. 10076-1E P. 8476-1F P. 8476-1G P. 8476-1H P. 8576-1K P. 8376-1Y P. 8376-2A P. 8676-2A ZB160 P. 8676-2B P. 8676-2C P. 8676-2D P. 8876-2E P. 8876-2F P. 8876-2J P. 8876-2K P. 8876-2N P. 8876-2P P. 8876-2S P. 8876-2T P. 8976-2U P. 8976-2V P. 8976-2W P. 8976-2X P. 8976-2Y P. 8676-6A P. 17576-6B P. 17576-6J P. 17576-6L P. 17576-6M P. 17576-6P P. 17576-7A P. 20276-7B P. 20276-7G P. 20276-7H P. 20276-7N P. 20276-7P P. 20276-7Q P. 20276-7R P. 20376-8B P. 18176-8C P. 18176-8D P. 18176-8E P. 18176-8J P. 18176-8K P. 18176-8P P. 18176-8R P. 18176-9B P. 18176-9C P. 18176-9E P. 181
7777-3A P. 10577-3B P. 10577-3C P. 10577-3F P. 10577-5A P. 11177-5B P. 11177-5C P. 11177-5E P.11277-5F P. 11277-5G P. 11277-5J P. 11377-5K P. 113
77-5L P. 11377-5M P. 11377-5P P. 11477-5PZ01 P. 9677-5Q P. 11477-5QZ01 P. 9677-5T Z01 P. 11477-5T Z03 P. 11477-5U P. 11477-5V P. 6777-8B P. 18277-8C P. 18277-8D P. 18277-8E P. 18277-8J P. 18277-8K P. 18277-8P P. 18277-8R P. 18277-9B P. 18277-9C P. 18277-9E P. 182
7878-1C P. 3378-1D P. 3378-1E P. 3378-1F P. 3378-1G P. 3378-1H P. 3378-1J P. 3478-1K P. 3478-1L P. 3478-1M P. 3478-1M ZH480 P. 3478-1R P. 3378-1S P. 3378-1U P. 3378-1W P. 3478-2C P. 7378-2D P. 7378-2DZ1St. P. 9978-2E P. 7378-2F P. 3678-2G P. 3778-2H ZM5 P. 3778-2H P. 3778-2J P. 3778-2M P. 7378-2N P. 7378-2P P. 3678-2Q P. 3678-2R P. 7378-2T P. 3178-2V P. 3178-3C P. 9078-3D P. 9078-3E P. 9078-3EZ01 P. 10078-3L P. 9378-3M P. 9378-3P P. 9378-3Q P. 9378-3S P. 9978-3Szbu P. 9978-3T P. 4178-4A P. 9178-4B P. 9178-4C P. 9178-4D P. 9178-4E P. 9178-4F P. 10178-4G P. 19078-4H P. 190
78-4J P. 19078-4K P. 19078-4L P. 9878-4M P. 9878-4N P. 9878-4P P. 9878-4Q P. 9978-4R P. 9978-4S P. 9978-4V P. 9778-4W P. 9778-5M P. 3578-5P P. 35
8181-1A P. 15581-1B P. 15581-1C P. 15581-1D P. 15581-1E P. 15581-1F P. 15581-1G P. 15581-1H P. 15581-1J P. 15581-2CZ01 P. 9781-2DZ01 P. 9781-2E P. 9781-2K Z P. 3781-2Y Z01 P. 5881-2Y Z02 P. 5881-4D P. 15581-4E P. 15581-4F P. 15581-4G P. 15581-4K P. 15581-4L P. 15581-6K ZB1200 P. 3781-6K ZB1500 P. 3781-6K ZB1600 P. 3781-6K ZB1800 P. 3781-6K ZB2000 P. 3781-6N P. 5481-8Q P. 8581-8P P. 8581-8PZ01 P. 100
8383-6J P. 9683-6K P. 9683-6L P. 85
8585-1D P. 9285-1E P. 7685-1F P. 7685-3A P. 9285-3B P. 9285-3E P. 9285-4F-1 P. 9485-4E P. 10185-4L P. 19085-4N P. 19085-4N Z01 P. 190
AA9-2A P. 130
C1C1-8A P. 59C1-8B P. 52C1-8C P. 52C1-8D P. 52C1-8G P. 52
C1-8H P. 52C1-8J P. 53C1-8K P. 53C1-8Q P. 53C1-8Q Z01 P. 53C1-8Q Z02 P. 53C1-8Q Z602 P. 53C1-8P P. 53C1-8R P. 53C1-8S P. 53C1-8V ZL200 P. 53C1-8V ZL300 P. 53C1-8V ZL400 P. 53C1-8W ZL50 P. 53C1-8W ZL100 P. 53C1-8W ZL250 P. 53
E1E1-0A P. 205E1-0B P. 205E1-1A P. 125E1-1B P. 125E1-1C P. 125E1-1D P. 125E1-1E P. 125E1-1G P. 125E1-1H P. 125E1-1J P. 125E1-1K P. 125E1-1L P. 125E1-1N P. 125E1-1P P. 125E1-1Q P. 125E1-1R P. 125E1-1S P. 125E1-2A P. 125E1-2B P. 125E1-2C P. 125E1-2D P. 125E1-2E P. 125E1-2G P. 125E1-2H P. 125E1-2J P. 125E1-2K P. 125E1-2L P. 125E1-2N P. 125E1-2P P. 125E1-2Q P. 125E1-2R P. 125E1-2S P. 125E1-3A P. 125E1-3B P. 125E1-3C P. 125E1-3D P. 125E1-3E P. 125E1-3G P. 125E1-3H P. 125E1-3J P. 125E1-3K P. 125E1-3L P. 125E1-3N P. 125E1-3P P. 125E1-3Q P. 125E1-3R P. 125E1-3S P. 125E1-4X P. 127
E2E2-0A P. 205E2-0B P. 205E2-0D P. 205E2-0E P. 205E2-0G P. 205
Article number search key
Elabo LaboratorySystems L 214
E2-0H P. 205E2-1A P. 126E2-1B P. 126E2-1C P. 126E2-1D P. 126E2-1E P. 126E2-1G P. 126E2-1H P. 126E2-1J P. 126E2-1K P. 126E2-1L P. 126E2-1N P. 126E2-1P P. 126E2-1Q P. 126E2-1R P. 126E2-1S P. 126E2-2A P. 126E2-2B P. 126E2-2C P. 126E2-2D P. 126E2-2E P. 126E2-2G P. 126E2-2H P. 126E2-2J P. 126E2-2K P. 126E2-2L P. 126E2-2N P. 126E2-2P P. 126E2-2Q P. 126E2-2R P. 126E2-2S P. 126E2-3A P. 126E2-3B P. 126E2-3C P. 126E2-3D P. 126E2-3E P. 126E2-3G P. 126E2-3H P. 126E2-3J P. 126E2-3K P. 126E2-3L P. 126E2-3N P. 126E2-3P P. 126E2-3Q P. 126E2-3R P. 126E2-3S P. 126E2-4A P. 127E2-4B P. 127E2-4C P. 127E2-4D P. 127E2-4E P. 127E2-4G P. 127E2-4H P. 127E2-4J P. 127E2-4K P. 127E2-4L P. 127E2-4N P. 127E2-4P P. 127E2-4Q P. 127E2-4R P. 127E2-4S P. 127E2-5A P. 126E2-5B P. 126E2-5C P. 126E2-5D P. 126E2-5E P. 126E2-5G P. 126E2-5H P. 126E2-5J P. 126E2-5K P. 126E2-5L P. 126E2-5N P. 126E2-5P P. 126
E2-5Q P. 126E2-5R P. 126E2-5S P. 126E2-6A P. 126E2-6B P. 126E2-6C P. 126E2-6D P. 126E2-6E P. 126E2-6G P. 126E2-6H P. 126E2-6J P. 126E2-6K P. 126E2-6L P. 126E2-6N P. 126E2-6P P. 126E2-6Q P. 126E2-6R P. 126E2-6S P. 126E2-7A P. 126E2-7B P. 126E2-7C P. 126E2-7D P. 126E2-7E P. 126E2-7G P. 126E2-7H P. 126E2-7J P. 126E2-7K P. 126E2-7L P. 126E2-7N P. 126E2-7P P. 126E2-7Q P. 126E2-7R P. 126E2-7S P. 126
E3E3-1A P. 128E3-1B P. 128E3-1C P. 128E3-1D P. 128E3-1E P. 128E3-1F P. 128E3-1G P. 128E3-1H P. 128E3-1J P. 128E3-1N P. 129E3-1P P. 129E3-1Q P. 129E3-1R P. 129E3-1S P. 129E3-1T P. 129E3-1U P. 129E3-1V P. 129E3-1W P. 129E3-2A P. 128E3-2B P. 128E3-2C P. 128E3-2D P. 128E3-2E P. 128E3-2F P. 128E3-2G P. 128E3-2H P. 128E3-2J P. 128E3-2N P. 129E3-2P P. 129E3-2Q P. 129E3-2R P. 129E3-2S P. 129E3-2T P. 129E3-2U P. 129E3-2V P. 129E3-2W P. 129E3-3A P. 128E3-3B P. 128
E3-3C P. 128E3-3D P. 128E3-3E P. 128E3-3F P. 128E3-3G P. 128E3-3H P. 128E3-3J P. 128E3-3N P. 129E3-3P P. 129E3-3Q P. 129E3-3R P. 129E3-3S P. 129E3-3T P. 129E3-3U P. 129E3-3V P. 129E3-3W P. 129E3-4A P. 128E3-4B P. 128E3-4C P. 128E3-4D P. 128E3-4E P. 128E3-4F P. 128E3-4G P. 128E3-4H P. 128E3-4J P. 128E3-5A P. 128E3-5B P. 128E3-5C P. 128E3-5D P. 128E3-5E P. 128E3-5F P. 128E3-5G P. 128E3-5H P. 128E3-5J P. 128E3-5N P. 129E3-5P P. 129E3-5R P. 129E3-5S P. 129E3-5Q P. 129E3-5T P. 129E3-5U P. 129E3-5V P. 129E3-5W P. 129E3-6A P. 128E3-6B P. 128E3-6C P. 128E3-6D P. 128E3-6E P. 128E3-6F P. 128E3-6G P. 128E3-6H P. 128E3-6J P. 128E3-6N P. 129E3-6P P. 129E3-6Q P. 129E3-6R P. 129E3-6S P. 129E3-6T P. 129E3-6U P. 129E3-6V P. 129E3-6W P. 129E3-7A P. 128E3-7B P. 128E3-7C P. 128E3-7D P. 128E3-7E P. 128E3-7F P. 128E3-7G P. 128E3-7H P. 128E3-7J P. 128E3-7N P. 129E3-7P P. 129E3-7Q P. 129
E3-7R P. 129E3-7S P. 129E3-7T P. 129E3-7U P. 129E3-7V P. 129E3-7W P. 129
E4E4-1A P. 127E4-1B P. 127E4-1C P. 127E4-1D P. 127E4-1E P. 127E4-1G P. 127E4-1H P. 127E4-1J P. 127E4-1K P. 127E4-1L P. 127E4-1N P. 127E4-1P P. 127E4-1Q P. 127E4-1R P. 127E4-1S P. 127E4-2A P. 127E4-2B P. 127E4-2C P. 127E4-2D P. 127E4-2E P. 127E4-2G P. 127E4-2H P. 127E4-2J P. 127E4-2K P. 127E4-2L P. 127E4-5A P. 127E4-5B P. 127E4-5C P. 127E4-5D P. 127E4-5E P. 127E4-5G P. 127E4-5H P. 127E4-5J P. 127E4-5K P. 127E4-5L P. 127E4-8A P. 130E4-8B P. 130E4-8C P. 130E4-8D P. 130E4-8E P. 130E4-8F P. 130E4-8H P. 130E4-8J P. 130E4-8K P. 130E4-8L P. 130E4-8N P. 130E4-8R P. 130E4-8S P. 130E4-8T P. 130E4-9A P. 131E4-9E P. 131E4-9G P. 131E4-9G ZX01 P. 206E4-9K P. 131
E5E5-1A P. 135E5-1C P. 135E5-1E P. 135E5-1F P. 135E5-1J P. 136E5-1K P. 136E5-1P P. 136E5-1R P. 137E5-1R X01 P. 137
E5-1S P. 137E5-1S X01 P. 137E5-1X P. 136E5-4A P. 135E5-4C P. 135E5-4E P. 135E5-4F P. 135E5-4J P. 136E5-4K P. 136E5-4P P. 136E5-4R P. 137E5-4R X01 P. 137E5-4S P. 137E5-4S X01 P. 137E5-5F P. 138E5-5G P. 138E5-5H P. 138E5-5J P. 138E5-5K P. 138E5-9F P. 138E5-9G P. 138E5-9H P. 138E5-9J P. 138E5-9K P. 138
PP3-5L P. 94P3-5K P. 94
SS1-1C P. 194S1-1D P. 194S1-1S P. 194S1-1T P. 194S1-1W P. 194S1-1X P. 194S1-4C P. 194S1-4D P. 194S1-4S P. 194S1-4T P. 194S1-4W P. 194S1-4X P. 194S1-2C P. 195S1-2D P. 195S1-2Q P. 195S1-2R P. 195S1-2W P. 195S1-2X P. 195S1-5C P. 195S1-5D P. 195S1-5Q P. 195S1-5R P. 195S1-5W P. 195S1-5X P. 195S1-6C P. 196S1-8C P. 196S1-8D P. 196S1-8S P. 196S1-8T P. 196S1-8W P. 196S1-8X P. 196S3-1A P. 199S3-1E P. 199S3-1K P. 199S3-1Q P. 199S3-1R P. 199S3-1V P. 199S3-2A P. 200S3-2E P. 200S3-2K P. 200S3-2Q P. 200S3-2U P. 200S3-4A P. 198
Article number search key
Elabo LaboratorySystems L 215
S3-5A P. 198S3-6A P. 198S4-1R P. 198S4-1S P. 198S4-1T P. 198S4-1U P. 198S4-1V P. 198S4-1W P. 198S6-1C P. 197S6-1D P. 197S6-1W P. 197S6-1X P. 197S6-3C P. 197S6-3D P. 197S6-3W P. 197S6-3X P. 197S6-4C P. 197S6-4D P. 197S6-4W P. 197S6-4X P. 197S6-6A P. 196S6-7C P. 197S6-7D P. 197S6-7W P. 197S6-7X P. 197
Article number search key
Training. Measuring. Testing. Assembling. Controlling.