access control gb rev 10
TRANSCRIPT
Accesscontrol
MAG
MAG 100
TAG-10/TAG-5/TAG-3 proximity readersTAG-10/TAG-5/TAG-3 proximity readers for passive transponders make it possible to create accesscontrol systems with an extremely high security level.They are easier to use thanks to long range detection and as they have absolutely no movingmechanical parts, they require virtually no maintenance.
Technical specifications MAG MAG 100
Use• Vehicle or pedestrian access control systems, including outdoor
installations
• Access control systems, especially pedestrian, for indoor installations
Use of TAG-5• Access control systems, especially pedestrian, for indoor installations
Use of TAG-3
Use of TAG-10• Vehicle or pedestrian access control systems,including outdoor installations
Enclosure in ABS metalPower 12 Vdc (from managementsupply card Viper-Cobra)Magnetic track reading Insertion type SwipeFormat ISO STANDARD
track 2Magnetic track reading 60% della traccia 100% della tracciaElectrical connections 5 x 0,5 mm2 multi-pole
shielded cableDistanza max tra lettore 100 metrese unità di gestione (Viper-Cobra)Operating ambient - 20° C ÷ + 55° CtemperatureInstallation on-wall or
on-columnHeater Managed by thermostat Not presentSignalling light Two-colour N.2 Led red and green
multi-function LEDBuzzer Can be disabledShutter Mechanical Not present
Compatible with VIPER card or COBRA management unit
MAG/MAG100 magnetic readerThe MAG/MAG100 insertion magnetic card reader, makes it possible to create accesscontrol systems for both vehicles and pedestrians.
TAG-10
TAG-5
TAG-3
TRANSPONDER
30
Technical specifications TAG-10 TAG-5 TAG-3
MAGNETICCARDS
PROXIMITYCARDS
Power supplyReading distanceProtection classElectrical connectionsMax distance between readerand management unitOperating ambient temperatreTwo-colour multi-function LEDBuzzerInstallationDimensions
~10 cmIP 54
YESYES (can be disabled)On-wall or on-column
70 x 95 x 44 mm (L x H x P)
~3 cm(indoor type)
YES (can be disabled)NO
Box 503see fitting
dimensions
12 Vdc (from management card)~5 cm
(indoor type)5x0,5 mm2 shielded cable type)
100 metres
-20°C ÷ +55°CYES
YES (can be disabled)GEWISS cont.
46 x 45,5 x 23 mm (L x H x P)
Compatible with VIPER card or COBRA management unit
magnetic and proximity readerThese devices are composed by magnetic and proximity reader using the standard503 box.They are suitable for any civil constructions as houses, offices, hotels, schools, etc.The available devices are the following:Frutto–STR ISO magnetic card swipe reader (100% of track)Frutto–INS ISO magnetic card reader by insertion (60% of track)Frutto–INT ISO card presence detection onlyFrutto–INT–PS ISO proximity card reader with card presence detection
Description Frutto-STR Frutto-INS Frutto INT Frutto-INT-PS
Device/reader Swipe magnetic reader Insertion magnetic reader Card presence only Proximity reader and(100% of track) (60% of track) card presence
Card type ISO magnetic ISO magnetic ISO size card only ISO proximityReading distance No No No Card insertedTwo colours LED No On front sideBuzzer Can be silenced Not provided Can be silencedFixing On box 503Wiring with managem. Cable 5x0,5 mm shielded Depend on the site Cable 5x0,5 mm shieldedunits Viper/Cobra (max 100 mt) (max 100 mt)Power source From manag.units Viper/Cobra Non powered From manag.units Viper/CobraAdsorbed current Max 90 mA None Max 90 mAOperating temperature -10°C ÷ +55°CCase Gewiss PlaybusDimensions(mm) 44 x 75 x 58 (H x W x D) 44 x 75 x 90 (H x W x D)
FRUTTO-STR
FRUTTO-INSFRUTTO-INTFRUTTO-INT-PS
31
reader for pedestrian and vehicular gatesResist range of readers and keyboards, has been conceived for both, pedestrian andvehicular gates. Metallic casing case structure with stainless steel front panel coveredby polycarbonate layer.It consists of the following devices:Resist –T Numeric keyboard to digit PIN codes onlyResist–PS Passive proximity readerResist–TPS Passive proximity reader with Numeric keyboard Resist–COL Column support for all kind of Resist devices
Description Resist - T Resist - PS Resist - TPS
Device/reader 12 keys keyboard Proximity Proximity and keyboardReading distance -- Max 5 cm Max 5 cmTag (125Khz) reading -- Card/key ringCase structure Casting aluminiumDimensions (mm) 100x100x42 (H x W x D)Front panel Fiber glass with polycarbonate layerIP degree IP 55Keys Stainless steel mechanic keys - Stainless steel mechanic keysInterface LED Two colours 3 mmBuzzer Can be silencedPower source From management unit ViperAdsorbed current Max 60 mA Max 100 mA Max 160 mAOperat. temperature -10°C ÷ +55°CFixing To wall or supp. columnWiring Cable 5x0,5 mm shielded
(max 100mt)
RESIST-T RESIST-PS RESIST-TPS RESIST-COL
32
Characteristics Resist-COLCase SteelPainting Black powder coatedDimensions 1100x100x100 mm
20÷30 Vdc 24 Vac ±10%
/IP 44
//
-20°C ÷+55°C
Power supply voltage
Work frequencyReading distanceProtection classTransmission channelsAvailable codesOperating ambient temperatureCompatibility
T2/DL2868 SLH
Power supplyvoltage
Work frequency
ReadingdistanceProtection class
TransmissionchannelsAvailable codes
Operatingambient temperatureCompatibility
PLUS 1 433
TML2 433 SLH
interface for 433 SLH DECODER TTRprogrammable radiocontrolThe DECODER TTL interface makes it possible to create access controlsystems using the FAAC 433 SLH radio control. The system is highly recommended for outdoor vehicle set-ups too since the user can remotely open the access while comfortably seated in the car.
TML4 433 SLH
DECODER TTR
Technical specifications PLUS 1 433 TML2 433 SLH TML4 433 SLH12V
Battery
~50 m/2
-10°C ÷+55°C
12VBattery
~50 m/4
-10°C ÷+55°C
with VIPER 400 card or COBRA 1500 - 5000 management unit
433,92 MHz
72 millions of billions
interface for 868 SLH DECODER TTRprogrammable radiocontrol
T4/DL4868 SLH LR
2 lithiumbatteries
5V
~50 m
/
4
-10°C ÷+55°C
TML2868 SLH LR
12Vbattery
~50 m
/
2
-10°C ÷+55°C
TML4868 SLH LR
12Vbattery
~50 m
/
4
-10°C ÷+55°C
PLUS1 868
2 lithiumbatteries
5V
~50 m
/
2
-10°C ÷+55°C
868,35 MHz
72 millions of billions
Technical specifications
with VIPER 400
TML2 868 SLH LRTML4 868 SLH LR
T2 868 SLH
T4 868 SLH
PLUS 1 868DL2 868 SLH
DECODER TTR
Characteristics
12/24 Vdc - Vac
/
IP 44
/
/
-20°C ÷+55°C
MIXER CARD
MIXER cardWith the MIXER card, two readers can be combined onthe same input, even of different technology
33
•The MIXER card enables users to combine two readers (of different technology too) on the same gate managed by VIPER 400/COBRA• This makes possible to create pedestrian or vehicle access control systems with double entrance and exit readers (e.g. magnetic and DECODER TTRor magnetic and transponder, etc.) managed by management unit VIPER 400/COBRA• The MIXER card is supplied with a DIN-bar applicable support and is, therefore, compatible with Mod. E-L-LM racks.
DL4 868 SLH
Technical specifications VIPER 400• The VIPER 400 management card was designed for pedestrian and
vehicle access control systems in stand-alone mode (without use of a personal Computer).
• Facility for connecting the following: maximum of 2 MAG/MAG 100magnetic readers, TAG-10/TAG-5/TAG-3 transponders or 433 SLH-868 SLH transmitters with the DECODER TTR
N.B. Two readers can be connected in parallel to the same input by using the MIXER card.• Memory capacity for up to 400 users• Can manage a single gateway or two programmable gateways:- single gateway:
entrance reader / exit push-buttonentrance reader / exit readerfacility for managing door status with possible alarm activation
- two gateways:reader on gateway Areader on gateway B(on gateway A can be installed an exit push-button and door statusmanagement with alarm activation)
• Facility for inputting access password
• 1 three-Digit Display for programming and displaying card status
• 5 programming push-buttons• Available programs:- card management (storage, deletion and modification)- operational settings (single-gataway management, double-gateway management, etc…)- time settings- exits activation- archive export/import
• The additional memory, which can be supplied as an optional item, enables users to export/import “card data” from one card to anotheror to make security copies.
• 12:24 Vac/Vcd power supply• Compatible with Mod. E - L - LM enclosures.
The Mod. E enclosure can house the following for combined use:- VIPER 400 card- Power-supply unit on DIN bar- DECODER TTR on DIN bar- MIXER card on DIN barThe Mod. L enclosure can house the following for combined use:- VIPER 400 card- MINISERVICE power-supply unit on DIN bar with installation accessoriesThe Mod. LM enclosure can house the following for combined use:- VIPER 400 card- MINISERVICE power-supply unit on DIN bar with installation accessories- DECODER TTR on DIN bar- MIXER card on DIN bar
MINISERVICEVIPER 400POWER
SUPPLY UNIT
VIPER 400
PROXIMITY CARDS
MOD. L
TRANSPONDER
management cardThe VIPER 400 independent management card is designed for stand-alone mode(without personal computer) access control systems. It is the ideal solution wherevera simple, secure system is required.
N.B.: In case a Miniservice unit is used to control an electric lock (12 Vac),the same power-supply unit can be used to supply the Viper board (24Vdc). In this case there is no need of Viper power supply unit. Not alla elec-tric lock are compatible with the Miniservice unit.
34
MAGNETICCARDS
Device/readerManagement unitReading distanceTag reading (125 khz)Case structureDimensions (mm)Front panelIP degreeInterface Led (by three coloured LEDS)
BuzzerInput
Output
CodesDoor control (one door)
Door control (two door)
Configuring and cards learning of codesPower supply
Adsorbed currentOperating temperatureFixingWiring master-slave (max 100 mt)
stand alone readers
Technical specifications
TAG 10 SA
35
TAG-10-SA is an access control device able to store proximitycards. Manages door by controlling its status (open or clo-sed). It may generates an alarm in case of not authorized ope-ning. It works autonomously ("SA" means Stand Alone) withno external management board or programming PC. Cardsarchives, can be copied by a removable memory (option).TAG-10-SA (reader A, master) is able to be manage a secondTAG-10 (reader B, slave). This configuration allows areamanagement having one entry/exit gate with Anti-Pass-Backfeature. Configuring and learning of cards are managed byself learning mode with Cards Kit.
ProximityBuilt in
Max 10 cmCard/key ring
Plastic95 x 70 x 44 (H x W x D)
PlasticIP 54
a) programmingb) reading OK
c) output electric look/doorCodes recognising, error status
n.1 door status inputn.1 open door input
n.2 relay outputs n.1 open collector output (alarm door status/tamper)
500 cardsn.1 master reader n.1 slave reader
n.1 alarm door statusn.1 door status input
n.1 master reader (door n.1)n.1 slave reader (door n.2)
n.1 alarm door status (door n.1)n.1 door status input (door n.1)
Self learning mode with Cards Kit12/24 Vdc 12/21 Vac
Max 180 mA-10°C ÷ +55°C
To wall or columnCable 5x0,5 mm shielded
TAG 10 SA
Device/readerManagement unitReading distanceTag reading (125 khz)Case structureDimensions (mm)Front panelIP degreeKeysInterface Led(by three coloured LEDS)
BuzzerInput
Output
CodesDoor control (one door)
Door control (two door)
Configuring and learningof codes or/and cardsPower supply
Adsorbed currentOperating temperatureFixingWiring master-slave (max 100 mt)
ProximityBuilt in
Max 5 cmCard/key ring
Casting aluminium100x100x42 (H x W x D)
Fiber-GlassIP 55
-a) programmingb) reading OK
c) output electric look/doorCodes recognising, error status
n.1 door status inputn.1 open door input
n.2 relay outputs n.1 open collector output(alarm door status/tamper)
500 (cards / PIN codes)n.1 master reader n.1 slave reader
n.1 alarm door statusn.1 door status input
n.1 master reader (door n.1)n.1 slave reader (door n.2)
n.1 alarm door status (door n.1)n.1 door status input (door n.1)
Self learning mode with Cards Kit
12/24 Vdc 12/21 Vac
Max 180 mA-10°C ÷ +55°C
To wall or column
Cable 5x0,5 mm shielded
36
RESIST-T-SA RESIST-PS-SA RESIST-TPS-SA
Resist - PS - SA Resist - TPS - SAResist - T - SA
stand alone readersRESIST-SA is an access control device able to store codes or/and cards. Manages doorby controlling its status (open or closed). It may generates an alarm in case of not autho-rized opening. It works autonomously ("SA" means Stand Alone) with no external mana-gement board or programming PC. Codes/cards archives, can be copied by a removablememory (option).RESIST-SA (reader A, master) is able to be manage a second RESIST (reader B, slave).This configuration allows area management having one entry/exit gate with Anti-Pass-Back feature. Configuring and learning of codes or/and cards are managed by keypador/and self learning mode with Cards Kit
12 keys keypad
--
12 keys 0-9, Enter, Space (backlit)
By keypad
Proximity and keypad
Max 5 cmCard/key ring
12 keys 0-9, Enter, Space (backlit)
By keypad or/and self learningmode with Card Kit
Technical specifications
BIOKEY is the biometric hand reader that recognises handsgeometry as unique characteristic for persons identification. 96 hand significant characteristics, are acquired from adigital camera, processed and compressed.The reference shape (template) thus obtained is put onfile archive. Identification is done by user code alreadyregistered and a new hand reading.This new reading is compared to the one of template onarchive with the evaluation of differences in between. If such difference is on the set range (tuned according toneeded security level), BIOKEY confirm identification ena-bling the output defined.As alternative, the unit can be used in badge reader emulation, by sending to central system, relevant inf.’s to local transaction in mag-stripe format.BIOKEY is able to operate, in addition to readerconfiguration with COBRA , with network 485 or LAN, inMaster-Slave configuration, if there’s a link on 2 or moreBIOKEY. In this way, only once is needed to collect handsimages from the master reader and then transfer them toremaining readers by simple command. User code can besent by build in keyboard or by badge reader. BIOKEY is user friendly and reliable. It makes an ideal unit for a lot of applications such as, restricted are where high security level is required,time attendance, security revolving doors management,opening for safes, unlocking system for archives, enabling security alarm/anti intrusion systems, etc.
biometric hand reader
Technical specifications
BIOKEY
BIOKEY
37
ReaderData formatInstallingLink to CobraDistance from reader to CobraPower supplyCaseUse
Biometric - Hand geometryMagnetic stripe
To the wallMultiwire cable 5x0,5 mm with screen
100 mt max.12/24 V cc/ca (not supplied)
Pre cast aluminiumPedestrian access control and time attendance
Reader
Finger print image memory.SensorProcessing timeMemory capacityUser PIN codeOutput data formatInstallingElectric wiring with Cobra unitMax distance from reader toCobraPower supplyAmbient temperature (indooruse only)Dimensions mm
38
biometric finger print reader BIOFINGER reader recognise finger prints; it is compact and easy to install.It checks the finger print by optical sensor.The reader is in need of identification code that address the reader to recognise only a set finger print pre-stored on the memory.It is recommended for use in restricted area.The reader manages two finger prints for each user to grant an high level of security.A special feature is available to exclude the finger print recognition in case that is not possible or finger is injured.A standard serial port is available for PC link as alternative to link withCOBRA unit.In case of more readers on the same site, the self learning of fingers is done by one master unit and exported to slave readers (max 32), by serial link.
Technical specifications
BIOFINGER
Optical check of finger print after PIN addressing.2 x 400 bytes
OpticLess than 2”
50 users (can be improved)From 1 to 15 digits
Magnetic stripeTo the wall
5x0,5 mm schielded100 mt.
12 V cc (not provided)0°C ÷ + 45°C
128 x 135 x 78 (H x W x D)
DIGIMAG MAGNETIC READER
DIGITAGPROXIMITY READER
DIGITAG2 PROXIMITY READER
CAR/M
DIGIMAG/DIGITAGpedestrian access control readersThe DIGIMAG and DIGITAG readers, supplied with keyboards and displays, are particularly suitable for pedestrian control with presence detection.
Use• Access control systems (especially pedestrian) installed indoors and
managed by COBRA UNIT and Personal Computer.
• The following can be input with the keyboard:- codes associated with the card being used (double security)- system activation codes- justifying codes- codes for activating-de-activating other systems (e.g. alarm system)
• The following information can be viewed on the display:- calendar with date and time- messages regarding cards being used (valid card, invalid card,
off time band, etc.)- messages concerning assigned codes- information messages sent via Personal Computer
Technical specifications DIGIMAGType of reader
FormatReading distance Numeric keyboard Magnetic track readingLCD display InstallationElectrical connectionsPower supplyMax distance between readerand management unit
magnetic swipe
ISO STANDARD track 2contact
100% of track
DIGITAG/DIGITAG-2passive proximity
/~10 cm
/16-key membrane
16 x 2 character, back-liton-wall
9x0,5 mm2 multi-pole shielded cableby COBRA management unit
40 metres
N.B.: DIGITAG-2 enables the detections of entrance and/or exit thanksto 2 different readers in the same device.
steel sheet with cataphoresis treated, pain-ted with RAL 2004 polyester paint
key lock protectedin stainless-steel
NO
YES
~10 cm
YES
YES
YESYES
with pre-wired COBRA 1500 management unitheight 1250 mmwidth 400 mmdepth 425 mm
DETECTOR, DECODER TTR,MIXER CARD
230 Vac (+6% -10%)40 m
-20°C ÷ +55°C
Technical specifications CAR/M CAR/P CAR/MP
YES
YES
contact~10 cm
YES
NO
contact
CAR series vehicle accesscontrol readersThe CAR series control units are designed for vehicle systems, including outdoor installations
39
Housing
Rear doorFront panelReader of magnetic insertion cardsProximity reader for passive transponders
Reading distance
16x2 character back-lit LCD displayBacklit keyboard in siliconrubber
Intercom“Traffic light” LEDMaster versionsOverall dimensions
Designed to install
Electrical supplyMax distance betweenMaster and Slave unitOperating ambient temperature
Housing
Rear doorDetection antennaElectronic control equipmentReading distanceFront panelLCD display KeyboardIntercomTraffic light LEDMaster versions
TAG
Overall dimensions(without antenna)
Designed to install
Electrical supplyMax distance between Masterand Slave unitOperating ambient temperature
Technical specifications CAR/TAGsteel sheet cataphoresis treated,
painted with RAL 2004 polyester paintkey lock protected
in tubular stainless-steelfor active transponder
~120 cmin stainless-steel
16 x 2 character, back-litin silicon rubber
with call push-buttonYES
with pre-wired COBRAmanagement unit
active type, self-powered by lithium batteryheight 1250 mmwidth 400 mmdepth 425 mm
DETECTOR, DECODER TTR,MIXER CARD
230 Vac (+6% -10%)40 m
-20°C ÷ +55°C
CAR/TAG vehicle access control reader with long range detectionThe CAR/TAG control reader is designed for vehicle accesses requiring long range detection.Thanks to an active transponder, it reads while the user sits in the car.
CAR/TAG
TAG ACTIVE TRANSPONDERS
AT-8 high speed vehicle access controlreaders with long range detectionThe AT-8 control unit is designed for identifying vehicles by reading TAGs active at 2.45 GHz, fitted by suction cup on the vehicle windscreen.Double identification facility - vehicle and driver - by COMBI-BOOSTER reading.
Technical specifications AT-8Reading unitDetection speedTAG readerStructure InstallationFront panelOverall dimensionsWeightOperating ambient temperaturePower supplyAbsorbed currentProtection classCompatibilityInterfaceIdentification signalling
for detection up to 8mmax 200 Km/h
active at 2.45 GHzin stainless-steel on flexible support
on-wall or on-rodin plastic
310 x 250 x 100 mm5 kg
-20°C ÷ +55°C
230 Vac~ (+6% -10%) 50 (60) Hz125 mAIP 65
COBRAby RS232 or OMROM ISO 7811/2
buzzer
WINDOWBUTTON
40
AT-8
WINDOW TAG
COMBI-BOOSTER
• Designed for identifying vehicles by reading TAGs active at 2.45 GHz fitted by a suction cup on the car windscreen
• TAG powered by lithium battery (minimum 5 years)• Double identification facility (vehicle and driver)
by COMBI-BOOSTER reading.• The COMBI-BOOSTER contains the vehicle activation active TAG and
is designed to house a passive proximity card (125 KHz). The devicetransmits the card code at 2.45 GHz to enable detection by the AT-8reader.
• This solution is ideal for managing “fleets” of municipal agencies,hospital agencies, etc, where both vehicle and driver must be “recognised” (COMBI-BOOSER TAG code and PROXIMITY CARD code).
Use
41
Technical COBRA 1500 COBRA 5000specifications
MOD. LM
COBRA 1500/5000
COBRA management unitThe COBRA management unit combined with WINCONTROL software makes it possible to create access control systems of all types and sizes; at the very top end over 500 readers can be connected to “WIN-NET”.All reading technologies can be applied by the MAG magnetic reader, right up to the LONG RANGE AT-8 active transponder. Memory capacity of up to 65,000 users. Management of 999 time bands on weekly basis and of annual calendar including holidays.
Access control Pedestrian Pedestrian system and vehicle and vehicle
CPU 16/32 bit 16/32 bit
Program memory 512 Kbyte Flash 512 Kbyte Flash updatable via serial updatable via serial port containing all port containing all function variations function variations
Tables + Buffered 128 Buffered 512 transactions Kbyte RAM Kbyte RAMmemory
Serial ports 1 RS 232 Serial 1 additional RS 1 additional RS 232 Serial
232 Serial 1 RS 485 Serial1 RS 485 Serial 1 RS 485 serial for
sub-network management
Operation mode Operates Operates stand-alone if stand-alone if
configured by a configured by a portable PC or portable PC or
on-network with a PC on-network with a PC
Reader Max 2 readers Max 2 readersmanagement (4 with MIXER board) (4 with MIXER board)
User Variable from 10 Variable from (stand-alone) to 3,500 10 to 15,000management Pre-set at 1,500 Preset at 5,000
Readings archive Variable from 200 Variable from 200 (stand-alone) (3,500 cards) to (15,000 cards) to management 12,000 (10 cards) 51,000 (10 cards)
Preset at 6,972 Preset at 34,189 with 1,500 users with 5,000 users
Hour band(stand-alone) 255 255management
Parking lane 1 or 2 1 or 2 management programmable programmable
Single door entry reader entry readermanagement exit push-button exit push-button
entry reader entry readerexit reader exit reader
possibility of possibility ofmanaging door managing door
status with alarm status with alarmactivation if activation ifnecessary necessary
Double door reader on gateway A reader on gateway Amanagement reader on gateway B reader on gateway B
exit push-buttons exit push-buttonsand door plus alarm and door plus alarmstatus management status management
can be inserted can be insertedon both gateways on both gateways
PIN management By connection to a By connection to a reader with display reader with displayand keyboard (pin and keyboard (pin
and pin+card) and pin+card)
Inputs and 6 inputs 6 inputsoutputs 1 anti-tampering 1 anti-tampering
4 relay outputs 4 relay outputs
Power supply 230 Vac 230 Vacvoltage (+ 6% ÷ 10%) (+ 6% ÷ 10%)
50 (60) Hz 50 (60) Hz
Battery 12 Volt 1.2 Ah 12 Volt 1.2 Ah
42
personal Computerand management software HP Vectra 366 MHz or higher - RAM 32 MB or higher – 4.3 GB Hard Disk or higher 15” monitor WINCONTROL 1P management software for direct connection to RS 232 serial port of PC and a COBRA unit
Technical specifications WINCONTROLOperating SystemAccessCommunication Identification
User associationsLogistic controls
Time controlsOpening conditions
Microsoft Windows (95/98/NT/2000/XP)confidential password
serial port• transponder cards
• magnetic card• PIN code
unlimited access level• enabled zones
• movements• anti-pass back
• typing in of amounts999 hour bands/week
• accesses level• hour bands• PIN codes
• temporary disabling
WINCONTROL 1PMANAGEMENT SOFTWARE (FOR 1 COBRA)Can be connected directly to RS 232 serial port of a Personal Computer
WINCONTROL 5PMANAGEMENT SOFTWARE (FOR 2 COBRA)Operates on WinNet by means of a line converter
WINCONTROL 10PMANAGEMENT SOFTWARE (FOR 10 COBRA)Operates on WinNet by means of a line converter
WINCONTROL 255PMANAGEMENT SOFTWARE (FOR 255 COBRA)Operates on WinNet by means of a 4-line converter
RS 232/RS 485 INTERFACE CONVERTER(FOR FOUR LINES)
RS 232/RS 485 INTERFACE CONVERTER(FOR ONE LINE)
PC
43
magneticKit for rapid installation of a pedestrian or vehicle access control system without the use of a personal computer by means of a magnetic card reading system
The kit includes• 1 enclosure• 1 power supply• 1 Viper 400 control card• 1 data storage memory• 1 magnetic reader for MAG cards• 1wall-mounting bracket• 20 magnetic cards
The kit includes• 1 enclosure• 1 power supply• 1 Viper 400 control card• 1 data storage memory• 1 proximity reader TAG 3• 1wall-mounting bracket• 20 proximity cards
proximityKit for rapid installation of a pedestrian or vehicle access control system without the use of a personal computer by means of a proximity card reading system
908310014 -
Rev
. 10 -
2000 -
SAB
- 03/2
005 -
The
desc
riptio
ns a
nd il
lust
ratio
ns c
onta
ined
in t
he p
rese
nt b
roch
ure
are
not
bind
ing.
FAA
C r
eser
ve t
he r
ight
to
unde
rtak
e pr
oduc
t te
chni
cal m
odifi
catio
ns w
ithou
t pr
ior
notic
e.
FAAC S.p.A. Via Benini, 1 • 40069 Zola Predosa - (Bologna) ItalyTel. +39 051 61724 • Fax +39 051 758518
www.faacgroup.com
REG. N. 085UNI EN ISO 9001:2000
mar
ka.b
o.it