ac tooling 2008
TRANSCRIPT
PLICAT08UK
SERVICING TOOLSfor AC systems
2008 Catalogue
IHGFEDCBA
SE
RV
ICIN
G T
OO
LS F
OR
AC
SY
ST
EM
SS
ER
VIC
ING
TO
OLS
FO
R A
C S
YS
TE
MS
Service stations Temperature and humidity detectors
A complete range of service stations forrefrigerant charging/discharging, recoveryand reclaim. Every model is in compliancewith CE and PED regulations
Accurate and reliable instruments forspecialists and garages
A huge choice of lubricants forcompressors and service stations
Leak detection systems Lubricants
A wide range of essential tooling forrefrigerant leak detection on vehicle ACsystems
Anti-bacterical treatment Pipes, hoses and O-Rings Kits
These products have been chosen fortreating the bacteria that forms in ACsystems, that emits unpleasant odours
A vast range of tools for repairing andreplacing pipe and hoses. Kits for replacingoriginal O-Rings, valve caps and valvecores for the most important European carapplications
AC flushing Compressors maintenance
Kits for compressor maintenance
Spare parts for servicing tools
All required to help the garages in ACsystem servicing
Others
LThe right is reserved by Delphi to change design & specifications of the products and accessories illustrated in this publication at any time without notice
Delphi offers a complete range of tools for AC system maintenance, diagnosis and repairing.Due to Delphi’s extensive knowledge and experience in vehicle AC systems, Delphi hasdesigned and developed a specific line including service stations for refrigerant charging/discharging, recovery and reclaim, leak detection systems, thermometers and humiditydetectors and AC system repairing kits.
Spare parts for Delphi servicing tools.
These kits are designed to remove oil andparticles trapped in the system that couldcause component damage and systemmalfunction
2008
SERVICING TOOLS FOR AC SYSTEMS2008
SE
RV
ICE
STA
TIO
NS
A 1
Back
REFMATIC POWER - AT41500P FULLY AUTO
Overview
The Refmatic POWER is completely automatic, but the operator can choose the manualoperating mode.The high performance vacuum pump and the powerful compressor have been includedfor the user who needs to maintain all AC systems including high capacity ones (example:Coaches).This model is provided with a wide display and a software, with all information on thecharging cycle, selectable in 15 different languages, as well: UK - D - F - E - I - POR - NL- PL - GR - CZ - SF - SK - SLO - TK - HU.It's supplied with a memory card key, necessary to start the machine, that integrates acar's database (over 40 car makes and over 1000 car models) selectable per make,model, prod. year, engine, engine type, refrigerant type, compressor oil and refrigerantquantity needed.Customers can purchase an updated key on an annual basis, with additional vehicleapplications.
It is equipped with a customised graphic printer to produce all information of the chargingcycle.
General characteristics
• Enlarged high definition manometers; the pressure gauge system is fitted withspherical valves to reduce the load loss.
• Refrigerant recovery and reclaim from AC system in one operation• Recovered/reclaimed refrigerant stored in a rechargeable tank (provided with safety
valves)• Integrated dye injector, to detect possible leak.• Air and humidity removal prior to recharging of the AC system• AC system recharging with display of the charged gas quantity.• Above functions are push-button activated and controlled by electronic scale; minimum operation required for ease and
simplicity of use• Highly absorbent de-humidifying filter, combined with a mechanical filter to eliminate possible impurity in the recovered
refrigerant• Sensor to allow controlled discharge of non-condensing gas remaining in the tank.• Sturdy customised chassis design, with 4 wheels, two of which are braked.
Specific characteristics
The Refmatic POWER is equipped with two mode software:• Automatic Program, to enter to the car's database• User Program, manual option
Automatic Program. It's possible to select the car's model through the database or just filling in the refrigerant quantity to charge.It allows you to select recovering, reclaiming and recharging operations in a completely automatic way. The user can check on thedisplay all information about each single step of the process (including the integrity of the AC system by means of the electronicvacuometer). The electronic vacuometer produces a warning sound if pressure leakages are detected, and stops any furtherprocesses.User Program. It allows control of all operations manually. All the modes are available (vacuum and charge capacity, electronicvacuometer, electronic weighing of the refrigerant, discharged oil and oil to be charged, etc.).
Other important characteristics of the Refmatic POWER AT41500P:
PrinterThe customised printer is able to produce a specific report for each working step with the following information:• Recovered refrigerant quantity• Discharged oil quantity• Possible reintegrated oil quantity• Possible reintegrated dye quantity• Possible reintegrated refrigerant quantity
Electronic scaleThe Refmatic POWER is equipped with 4 electronic scales: for the refrigerant (tank), for the dye, for the discharged oil and for thecharged oil.
Others
Condenser with fan, for better efficiencyHeating beltAutomatic oil dischargeTotally automatic oil chargeTotally automatic dye chargeFor further information, see technical data.
SERVICING TOOLS FOR AC SYSTEMS2008
SE
RV
ICE
STA
TIO
NS
A 2
Back
REFMATIC ACTIVE - AT41500A FULLY AUTO
Overview
The Refmatic ACTIVE is completely automatic, but the operator can choose the manualoperating mode.This model is provided with a wide display and a software, with all information on thecharging cycle, selectable in 15 different languages, as well: UK - D - F - E - I - POR - NL- PL - GR - CZ - SF - SK - SLO - TK - HU.It's supplied with a memory card key, necessary to start the machine, that integrates acar's database (over 40 car makes and over 1000 car models) selectable per make,model, prod. year, engine, engine type, refrigerant type, compressor oil and refrigerantquantity needed.Customers can purchase an updated key on an annual basis, with additional vehicleapplications.
It is possible to provide this model with a graphic printer to produce all information of thecharging cycle.
General characteristics
• Enlarged high definition manometers; the pressure gauge system is fitted withspherical valves to reduce the load loss
• Refrigerant recovery and reclaim from AC system in one operation• Recovered/reclaimed refrigerant stored in a rechargeable tank (provided with safety
valves)• Integrated dye injector, to detect possible leak• Air and humidity removal prior to recharging of the AC system• AC system recharging with display of the charged gas quantity• Above functions are push-button activated and controlled by electronic scale; minimum operation required for ease and
simplicity of use• Highly absorbent de-humidifying filter, combined with a mechanical filter to eliminate possible impurity in the recovered
refrigerant• Sensor to allow controlled discharge of non-condensing gas remaining in the tank• Sturdy customised chassis design, with 4 wheels, two of which are braked.
Specific characteristics
The Refmatic ACTIVE is equipped with two mode software:
• Automatic Program, to enter to the car's database• User Program, manual option
Automatic Program. It's possible to select the car's model through the database or just filling in the refrigerant quantity to charge.It allows you to select recovering, reclaiming and recharging operations in a completely automatic way. The user can check on thedisplay all information about each single step of the process (including the integrity of the AC system by means of the electronicvacuometer). The electronic vacuometer produces a warning sound if pressure leakages are detected, and stops any furtherprocesses.
User Program. It allows control of all operations manually. All the modes are available (vacuum and charge capacity, electronicvacuometer, electronic weighing of the refrigerant, discharged oil and oil to be charged, etc.).
Other important characteristics of the Refmatic ACTIVE AT41500A:
Printer (AT41573)The customised printer, offered as optional, is able to produce a specific report for each working stepwith the following information:• Recovered refrigerant quantity• Discharged oil quantity• Possible reintegrated oil quantity• Possible reintegrated dye quantity• Possible reintegrated refrigerant quantity
Electronic scaleThe Refmatic ACTIVE is equipped with 4 electronic scales: for the refrigerant (tank), for the dye, for the discharged oil and for thecharged oil.
Others
Automatic oil dischargeTotally automatic oil chargeTotally automatic dye chargeFor further information, see technical data.
Printer AT41573
SERVICING TOOLS FOR AC SYSTEMS2008
SE
RV
ICE
STA
TIO
NS
A 3
Back
REFMATIC PLUS - AT41502 SEMI AUTO
Overview
AT41502 is semiautomatic, provided with vacuum pump.
This Refmatic is particularly suitable for AC systems which need a refrigerant quantityless than 1 Kg (usually, all cars and special agricultural machines, except for coaches).
General characteristics (for all service stations)
• Enlarged high definition manometers; the pressure gauge system is fitted withspherical valves to reduce the load loss
• Refrigerant recovery and reclaim from AC system in one operation• Recovered/reclaimed refrigerant stored to a rechargeable tank (provided with safety
valves)• Air and humidity removal prior to recharging of the AC system• AC system recharging with display of the charged gas quantity• Above functions are push-button activated and controlled by electronic scale.
Minimum operation required for ease and simplicity use• Highly absorbent de-humidifying filter to eliminate possible impurity in the recovered
refrigerant• Oil injector fitted with non-return valve, to eliminate oil contamination• Sensor to allow controlled discharge of non-condensing gas remaining in the tank.• Supply / service hoses, leak resistant, provided with quick fitting couplings with
patented valve system• Sturdy customised chassis design, with 4 wheels, two of which are braked
Specific charateristics
The “Plus” model is provided with a vacuum pump with automatic stop, and electronicguard for “pressure return” of the refrigerant; the pump is automatically activated, with a double valve security system.
The pressure gauges manifold is provided with 2 metre hoses (from the manifold to the Refmatic) and 2 metre hose (from themanifold to the car) - total 4 metres from the car and the Refmatic.
For further information, see technical data.
SERVICING TOOLS FOR AC SYSTEMS2008
SE
RV
ICE
STA
TIO
NS
A 4
Back
COVER FOR SERVICE STATIONS - AT41410
Simple and practical, protect the service stations when not used.
HEATING BELT FOR REFRIGERANT TANK - AT41572
Suitable for keeping the refrigerant at the proper charging pressure.
R EF M A T IC P OWER A T 41500P
R EF M A T IC A C T IVE A T 41500A
R EF M A T IC P LUSA T 41502
R efrigerant R134a R134a R134a
C o ntro ls automatic(with automatic o il injection)
automatic(with automatic o il injection)
semi-automatic(without automatic o il injection)
R efrigerant weighing accuracy Electronic scale+/- 10 g
Electronic scale+/- 10 g
Electronic scale+/- 10 g
Oil weighing accuracy Electronic scale+/- 1 g
Electronic scale+/- 1 g
no
Service ho ses length 3 m 3 m 2 m + 2 m
A ir and inco ndensablegas purge automatic automatic automatic
T o ta l weight 99 kg 99 kg 70 kg
D imensio ns 63 x 124 x 63 cm 63 x 124 x 63 cm 52 x 120 x 62 cm
P o wer supply 230 V 50/60 Hz 230 V 50/60 Hz 230 V 50/60 Hz
P o wer capacity 700 W 700 W 700 W
Operating temperature range 10 / 50°C 10 / 50°C 10 / 50°CM ano meters
(pressure gauges)HP - BP
(pulse free)HP - BP
(pulse free)HP - BP
(pulse free)H ermetic co mpresso r
displacement 14 cc 9 cc 9 cc
R eco vering refrigerant capacity 450 g/min 250 g/min 250 g/ min
C o mpresso r o il quant ity 400cc 300cc 300cc
Vacuum pump capacity 14 m³/ h 6 m³/ h 6 m³/ h
Vacuum max. 0,05 mbar 0,05 mbar 0,05 mbar
Vacuum pump po wer 560 W 250 W 250 W
Vacuum pump o il quant ity 800 cc 280 cc 280 cc
Vacuum pump o il type 041197/0 041197/0 041197/0
T ank capacity 25 kg 10 kg 10 kg
D ehydrato r f ilter 1 1 1D ehydrato r f ilter capacity
(humidity abso rpt io n) 48g 48g 48g
CE CE CE
PED PED PEDR egulat io ns co mpliance
SERVICING TOOLS FOR AC SYSTEMS2008
SE
RV
ICE
STA
TIO
NS
A 5
Back
REFMATIC FRIGO - AT41522 R404a - REFRIGERATION SYSTEMS
Overview
Semi-automatic service station, provide with vacuum pump.This Refmatic is suitable for the maintenance and the charge of all AC systemscontaining R404a refrigerant.
General characteristics
• One-step refrigerant recovery and reclamation from chilling / freezing system.• Refrigerant storage and display of the amount recovered• Evacuation of air and moisture from the system before the recharging• Automatic stop of the vacuum pump• Automatic start-up of the vacuum pump (double solenoid valve)• Automatic recharging of the system with high-precision display of the amount added• The above functions are programmed via keyboard and controlled by an electronic
scale
Technical data
Refrigerant R404aControls semi-automatic (without
automatic oil injection)Weighing accuracy - Refrigerant by electronic scale + / - 10 gWeighing accuracy - Oil noHose length 2m + 2mAir discharge automaticWeight 70 KgDimension 65x54x120 cmPower supply 230 V – 50/60 HzPower rating 650 WTemperature range 10 / 50°C1Manometer HP - BP (no glicerine) - Kl. 1.0Compressor displacement 14 cmsVacuum pump 250 g / minOil compressor capacity 330 ccVacuum pump capacity 4.3 m3/hMaximum vacuum rate 0,1 mbarPower rating vacuum pump 350 WOil vacuum pump capacity 350 ccVacuum pump oil 041197/0Tank capacity 12 kgNumber of receiver driers 1Dehumidifying filter capacity 186 gSafety Standard CE - TUV - PED
SERVICING TOOLS FOR AC SYSTEMS2008
SE
RV
ICE
STA
TIO
NS
A 6
Back
PORTABLE CHARGING STATION FOR R134a/R22/R407/R507 - AT41147
Main characteristics
Portable charging unit for use in leak checks and pressure tests. Can evacuate air and moisture from AC systems and refill withrefrigerant. Refrigerant can also be heated during charging. Can measure vacuum level and achieve - 0,8 bar.The unit has supply hoses with quick fit double connectors for R134a.Due to its light weight and small size, this unit is particularly recommended for out of workshop use (agricultural equipment, earth-moving equipment and domestic applications).This unit does not recover refrigerant.
Technical data
Safety requirements meet with CE standardsRefrigerant R134a / R22 / R407 / R507Cylinder capacity 2,2 kgCylinder Scale R134a / R22 / R407 / R507Single stage vacuum pump 70 L/minVacuum level attainable in AC systems 7x10-2 barPump oil requirement 210 cm3
Vacuum pump oil type 041197/0Noise level < 70dB (A)Temperature range from 0 °C to 40 °CStorage temperature from -25 °C to +55 °CPower rating 220 WInput current 1,8 APower supply 220 V - 50 HzDimensions (cm) 58x20x58
PORTABLE REFRIGERANT RECOVERY UNIT - AT41544
This portable unit is provided with a distiller this is to enable it to perform both recovery and recycling functions.The oil-less compressor inside the machine, can recover (in liquid and / or vapour) all CFC – HCFC – HFC refrigerants (R410aincluded).The recovered oil is discharged into a graduated bottle, so that it can be measured.The refrigerant recovery unit is provided with a dehydrator filter, which can easilybe replaced.
Technical data
Recover capacity Vapour, up to 15 kg / hourLiquid, up to 45 kg / hourSpecial function, up to 200 kg / hour (*)
Recycling capacity up to 5 kg / hourPower supply 230 Volt / 50-60 HzPower 525 WWeight 17,6 kg
(*) This mode (high performance) requires tank with double suction device, and the AC system must have both ports (low pressureport and high pressure port)
TE
MP
ER
ATU
RE
AN
D H
UM
IDIT
YB 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
THERMOMETER - AT41390
Main characteristics
An inexpensive, reliable and accurate instrument for showing interior and exterior vehicle temperatures.LCD display in °C and °F.
Technical data
Temperature range from -20 to +120 °CTemperature reading accuracy ± 0,3 °C between -20 and +120 °CNormal working conditions from 0 °C to +50 °C with max 95% RH.
INFRARED DIGITAL THERMOMETER - AT41562
Main characteristics
This tooling permiits a quick temperature survey through a laser layer.Especially appropriate when the temperature to detect is in a very restricted area or not easily reachable or far from the operator.Itis provided of a LCD display for temperature reading in °C or °F.The back lighting display permits a optimal reading in case of low illumination.
Technical data
Automatic switch off systemTemperature range from -20° to +420 °CDimensions 17 x 4,4 x 4 cmWeight 200 gResolution 0.1 °CResponse time 500 m/sPower supply 1 x 9V batteryBattery lenght 30 hours
THERMOMETER-HYGROMETER - AT41404
Main characteristics
This instrument is particularly suited for measuring temperature and humidity inside vehicles.LCD display of temperature in °C and °F in %RH.Temperature and humidity levels shown simultaneously.Automatic memory recall of max. and min. values of temperature and humidity.Handy pocket clip can also be used for fixing the instrument inside a vehicle.Battery life (LR-44 x 2) is approx. 4400 hours of continuous use.
Technical data
Temperature range from 0 to +50 °CHumidity range from 2% RH to 98% RHTemperature reading accuracy ± 1 °C from 0 to 40 °C / ± 2 °C fo other rangesHumidity reading accuracy ± 5% RH from 40%RH to 80% RH between
+15 and +40 °CPower supply 2 x LR-44 batteries
LEA
K D
ET
EC
TIO
N S
YS
TE
MS
C 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
LEAKAGE DETECTION KIT - NITROGEN PRESSURE - AT41542 & AT41542UK (∗)
This kit is provided with a class 1 manometer. The kit can detect vary small leakages.This kit can also be used to verify the settings of the pressure switches and manometer units.
Technical data
Inlet pressure 20 MPaOutlet pressure 0,5 → 4,8 MPaConnections ¼ “ SAEManometer 80 mm diameter, class 1.0 (defined sectors), provided with
positioning indicator and calibration screwAdapter 5/16” SAE – F x ¼ “ SAE M (connection for R410a systems)Flexible hose ¼” SAE - 1,5 meter
(∗) AT41542UK is differentiated with a 7/8” 14UNS adapter, only suitable for UK market (please check your nitrogen bottleconnection type and order accordingly).
REFRIGERANT DETECTION KIT - AT41550
Provided with a complete friendly user and ergonomic injection gun, hose with R134aquick coupler, 12 V UV lamp, dye bottle, goggles and dye cleaner bottle.
MANUAL INJECTION SYSTEM FOR DYES (GUN + DYE BOTTLE) - AT41551
This product injects a single dye dose into the AC system; the injection pressure is 11 bar(150 psi). This product prevents air from entering AC system by means of a built-infeature.Very easy to operate; a solid tool made of rugged materials to withstand the toughestworkshop.The product components are: injection gun, hose with R134a quick coupler, dye bottle(64 doses), R12 adapter, purge valve.Case included.
LEA
K D
ET
EC
TIO
N S
YS
TE
MS
C 2
SERVICING TOOLS FOR AC SYSTEMS2008
Back
FITTINGS FOR DYE INJECTION - AT41353
Main characteristics
The kit has universal fittings and can be used on any type of R134a charging station.There is a calibrated container, which allows the introduction of exactly the rightamountof liquid detector into the AC system and avoids the creation of air bubbles,which can damage the system’s efficiency.The kit can also be used with single dose additive capsules for R134a through a 1/2"ACME connector.
UV DYES FOR LEAK DETECTION
Suitable for leak detection tools, are available in different bottle sizes, for every necessity.
AT41555 1 bottle (32 doses, provided with one dose measurer)
AT41552 1 bottle (64 doses)
AT41553 4 bottles (32 doses each)
AT41554 6 bottles (16 doses each)
UV LAMP WITHOUT SUPPLY CABLE, WITH BATTERY CHARGER - AT41556
Main characteristics
This product is a cordless rechargeable UV lamp, can be used when the other lamps arelimited by their cord.The battery charger and goggles are included.
UV LAMP WITH SUPPLY CABLE (12V) AND GOGGLES - AT41549
Main characteristics
Indispensable when searching for refrigerant leaks from car AC systems. The UV lamp runs on a 12V supply and can beconnected directly to the car battery. Power rating 50W.The 4-meter cable allows for the inspection of almost any type of vehicle. The lamp requires no pre-heating, is extremely light andsturdy and can be used in even the most difficult conditions.
Other characteristics
The liquid detector particles show up in the fluorescent UV light. The bulb life is about3000 hours of intermittent use.The special goggles (supplied) not only protect the operator’s eyes but also enhance thefluorescence of the liquid detector (dye).
LEA
K D
ET
EC
TIO
N S
YS
TE
MS
C 3
SERVICING TOOLS FOR AC SYSTEMS2008
Back
SAFETY GOGGLES - AT41559
These goggles are designed for providing essential impact protection to the wearer’s eyes, soas not to get hurt from recoiling or ejecting objects.It protects from the impact equivalent to the power caused by a steel ball of 44 g at a velocityof 50 m/s.
UV DYE CLEANER
Essential to remove UV dye residues. Available in two different sizes.
AT41557 6 bottles (240 ml each)
AT41558 6 bottles (123 ml each)
ELECTRONIC LEAK DETECTOR - AT41570
Main characteristics
This refrigerant leak detector has an electro-chemical sensor made of ceramic substrate covered with a reagent. The sensor iskept at a high temperature by an in-built mechanism. It is sensitive to all CFCs (R12, R11), HFCs (R134a) and HCFCs (R22,R123). When one of these halogen gases comes in contact with the hot surface, the chlorine, fluorine and bromine atoms separatefrom their molecules and ionise. This produces an electrical current that, passing throughthe ceramic material, reaches an electrode in the centre of the sensor. The detector isautomatic and does not have to be set for a particular type of refrigerant. It compensatesautomatically for variations in background contamination and humidity. An audiblevariable pitch signal pinpoints the exact source of the leak.
Technical data
Sensitivity to CFC, HFC, HCFC (3 way) 3 g per yearContamination adjustment automaticPower source 2 type “C” alkaline batteriesWeight with batteries 700 gTemperature range in working conditions from -27 to +50 °CDimensions 21,5x8,8x5,7 cmCertifications UL - CE
LUB
RIC
AN
TS
D 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
PAG OIL FOR AC COMPRESSORS
AT41245 ISO 46 Ford (FX15, FS10) - Harrison, GM, Delco (CVC) - Honda(Hadsys), Matsushita (Scroff) - Mitsubishi (Scroll) -Nippondenso (10P,10PA, CA, SC, SB, SE) - Panasonic (Scroll) -Sanden (SD7H Type C, SD7B10, SD7V, TR Scroll)Diesel Kiki (CD17, DCW17, 13CH, 15CH) - Tama Seiskusyo(16CH, 17CH, DKS26, TM31) Unicla (Z145, Z150, Z170) -York/CCI (206, 209, 210)(250cc tin)
AT41238 ISO 100 Nippondenso (TV) - Sanden (SD5H, SD7H Type A&B) -Seiko Seiki (SS Rotary) - Seltec (DKV-14C&D.,KC45&50) -Zexel (All piston compressor)(250cc tin)
AT41244 ISO 150 Harrison, GM, Delco (A6, R4, HR6, V5, HR17)(250cc tin)
ESTER OIL FOR AC COMPRESSORS
AT41384 ISO 100 Supply of RL100S R12-R134a Ester oil (1 litre tin)
AT41385 ISO 100 Supply of RL100S R12-R134a Ester Oil (12x1litre tins)
AT41391 ISO 150 Supply of RL150S R12-R134a Ester Oil (1 litre tin)
OIL FOR SERVICE STATIONS
041197/0 Oil for vacuum pump
AN
TI-B
AC
TE
RIA
L T
RE
ATM
EN
TE 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
ANTI-BACTERIAL
Two anti-bacterial treatments have been chosen for treating the bacteria that forms in the ducting, heat exchangers andevaporating system and emits unpleasant odours. The treatments meet very restrictivetoxicological and working condition requirements.
AT41428 ACAT 30 - HEAVY DUTY anti-bacterial treatment - 400 ml - FoamSupplied in cartons of 12 units
AT41434 ACAT 40 - STANDARD anti-bacterial treatment - 400 ml - SpraySupplied in cartons of 12 units
AT41567 ACAT 40 - STANDARD anti-bacterial treatment (“Grenade” type application) -Single-dose Kit for bus and camper - 200 ml - SpraySupplied in cartons of 12 units
AT41566 ACAT 30 & ACAT 40 (“Grenade” type application) - Single-dose Kit - 50 ml -Supplied in cartons of 28 units (14 of each)
AIR SANITIZER - AT41532
The sanitizer is a professional ozone generator of high capacity which, thanks to the ozone strong oxidizing power, fights againstbacteria, moulds and mites and dissolves bad smells, such as smoke of cigarette, pet odours, etc....Perfect to sanitize the following places:
• vehicles’ air conditioning and ventilation systems
• driver and passenger compartment and driver’s cabins
• campers and caravans
• trains carriages
• boats
Equipped with 230V power and 12V car adapter.
Technical data
Capacity 100 mg/hPower supply 230V - 50 HzTimer 5 selectable programmes (5’ - 15’ - 30’ - 45’ - 60’)Working temperature from 0 to 50 °CWeight 1,2 kgDimension 175 x 125 x 115 mm
PIP
E A
ND
HO
SE
S R
EPA
IRIN
GF 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
CRIMPER - AT41397
Meets with CE safety requirements. The tool is very light, sturdy and easy to use. It isin high resistance light alloy with high-grade steel stud-bolts and the main screw is onbearings. Quick change crimping elements according to the size required. Can betransformed into a manual hydraulic or semi-automatic crimper with the attachmentshown in photos 2/3/4.The crimper without accessories is key operated with a vice support.
Approx. weight: 2 Kg
Possible combinations
1+2 = crimper used manually1+3+4 = crimper used with pneumatic/hydraulic assistance
1
MANUAL POWER UNIT FOR CRIMPER - AT41396
Meets with CE safety requirements. Can be used with other types of crimpers. Thishydraulic pump allows the operation of the crimper practically anywhere without theneed for an electrical or compressed air supply.
Technical data
Weight: 1,1 kgCrimping power: approx. 5,6 t at 700 barCrimp holding strength: up to 140 bar
2
HYDRAULIC ADAPTER - AT41395
This accessory is for use with power unit AT41374.
Technical data
Crimping power: approx. 5,6 t at 700 barCrimp holding strength: up to 140 barFlexible extension: 1,8 m
3
PNEUMO-HYDRAULIC POWER UNIT FOR CRIMPER - AT41374
Meets with CE safety requirements. The unit is pneumatically operated and isactivated by a built-in pedal.The unit is connected to a compressed air line using standard couplings and allowswork to be carried out at the workbench with no physical effort required.
Technical data
Working pressure of compressed air line: from 5 to 8 barWeight: 10 kgDimensions: 30 x 15 x 27 cmWorking pressure: 700 bar
4
PIP
E A
ND
HO
SE
S R
EPA
IRIN
GF 2
SERVICING TOOLS FOR AC SYSTEMS2008
Back
CRIMPING MACHINE WITH 8 DIES
A new crimping machine with 8 dies, to crimp hoses of A/C and cooling systems in different sectors. The system with 8 dies allowselimination of pressure leak from the fittings.The crimper can be open thus allowing the crimping of special and difficult elbows.
Two versions available:
Manual pump and integrated piston - AT41571
With hydraulic handle in titanium alloy, hose and adapter - AT41574,to be matched to the pneumo-hydraulic power unit AT41374
RUBBER HOSE CUTTER - AT41097
Tool for precision cuts in rubber refrigerant hoses.
METAL PIPE CUTTER - AT41424
Tool for precision cuts in metal refrigerant pipes of 3-16 mm.
PLIERS FOR FRIGOCLIC AND REFRIMASTER - AT41546
For an easily clamping/ releasing of Frigoclic / Refrimaster hose clamps.
PIP
E A
ND
HO
SE
S R
EPA
IRIN
GF 3
SERVICING TOOLS FOR AC SYSTEMS2008
Back
RUBBER HOSES
Specific hose for R134a
Code Type Refrigerant LengthSSP90006G2G20 small size (06) R134a 20 mSSP90006G2G small size (06) R134a 50 mSSP90008G2G20 medium size (08) R134a 20 mSSP90008G2G medium size (08) R134a 50 mSSP90010G2G20 large size (10) R134a 20 mSSP90010G2G large size (10) R134a 50 mSSP90012G2G20 large size (12) R134a 20 mSSP90012G2G large size (12) R134a 50 m
Reduced diameter for R134a
Code Type Refrigerant Length90006GN1 small size (06) R134a 20 m90008GN1 medium size (08) R134a 20 m90010GN1 large size (10) R134a 20 m90012GN1 large size (12) R134a 20 m
Refrimaster for R134a and R404
Code Type Refrigerant90006G2GRFR small size (06) R134a and R40490008G2GRFR medium size (08) R134a and R40490010G2GRFR large size (10) R134a and R40490012G2GRFR large size (12) R134a and R404
CLAMPS FOR REFRIMASTER HOSES
0361778/0 for small hose (06)
0361779/0 for medium hose (08)
0361780/0 for large hose (10)
0361781/0 for large hose (12)
PIP
E A
ND
HO
SE
S R
EPA
IRIN
GF 4
SERVICING TOOLS FOR AC SYSTEMS2008
Back
REPAIRING TOOL FOR PRE-FORMED AIR CONDITIONING METAL PIPES - AT41379
Characteristics
The Lokring joint is composed of two special bushes on a calibrated manifold tube.The tube passes over the ends of the two pipes to be joined creating a joint.Repair of any type of metal AC piping can be carried out in minutes using a “Lokring”joint, thus avoiding the replacement of entire piping systems and dangerous brazing orwelding. A “Lokring” joint guarantees a perfect repair.The equipment is also ideal for designing a piping system of any shape or size bycombining straight lengths with the assorted joints available (straight, at 30°, etc.). Thecomplete list of joints are included in the kit. The joints can be purchased individually.The cost of this equipment can easily be recovered after only 3 or 4 repairs.
Making a “Lokring” joint
The joint is made using a special ratchet crimping hand tool that has four pairs ofgripping jaws. Used in combination with a small quantity of “Lokprep” (supplied), aperfect seal can be made even when the tubes to be jointed are not perfect (Fig. 5).
Illustrated example
- Clean the ends of the tubes to joined (Fig. 1)- Apply Lokprep sealant to both ends (Fig. 2)- Insert both ends inside the correct Lokring joint (Fig. 3)- Seal with the crimping hand tool as shown (Fig. 4)
“Lokring” joint technical data
Highly resistant joints with a nominal working pressure of 50 bar.Safety factor 1:4 (200 bar)Wide temperature working range: -50° > + 150 °CHigh reliability: burst tests have shown that the burst point of the joint is higher thanthe burst point of the pipes.No special preparation required, simply remove dirt, grease or paint from the ends tobe jointed.
Other characteristics
Lokring connectors come in either aluminium or brass.Where one of the tubes to be jointed is aluminium, use an aluminium connector.Use a brass connector with other metals.Different size joints are available for the different tube diameters.Tubes from 8 - 19 mm outside diameter can be repaired.
Fig. 1
Fig. 3
Fig. 4
Fig. 2
PIP
E A
ND
HO
SE
S R
EPA
IRIN
GF 5
SERVICING TOOLS FOR AC SYSTEMS2008
Back
FITTINGS FOR ORIGINAL PIPES REPLACEMENT
This equipment allows fast and economical replacement of any original tubing without having to wait for the arrival of original spareparts. The kit consists of two special adapters and a standard Delphi tube and connectors which, when put together, form analternative to the original tubing. The flexibility of the tube makes for easy replacement and considerably cuts down installationtimes.
There are numerous advantages to this system:- cheaper than original parts- reduced installation times- no waiting for spare parts- highly flexible use- single items of the kit can be ordered
The following kits are available:
AT41440 for Alfa Romeo, Fiat and Lancia
AT41470 for Audi
AT41480 for Volkswagen
AT41497 for Alhambra, Galaxy and Sharan
AT41512 Adapter + flange kit compressor/evaporator Fiat ∅ 15
AT41513 Adapter + flange kit compressor/evaporator Fiat ∅ 18
AT41514 Flange kit for Sanden compressor
AT41515 Adapter kit for Sanden compressor (G10)
AT41516 Adapter kit for Sanden compressor (G8)
SPRING-LOCK TOOLS
Kit for rapid, safe removal of OE refrigerant pipes.
AT41419 For all pipe sizes (3/8”, 1/2”, 5/8”, 3/4”) Ford, Volvo, Hyundai
AT41419
AT41429 For Opel and Volkswagen.
AT41429
Original pipe
Delphi pipe
↓
PIP
E A
ND
HO
SE
S R
EPA
IRIN
GF 6
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TOYOTA’S SPECIAL CLAMPS - AT41565
These clamps allow accurate connection on Toyota AC systems.
SPRINGLOCK RELEASERS
AT41563 This single special tooling allow easy clamp releasing of the MB W211 hoses.
AT41564 This kit contains two HP and LP springlock releasers essential and user friendly torelease the high and low pressure clamps on Smart vehicles.
THREAD RESTORATION TOOLS - AT41394 and AT41518
With these two kits all damaged threads can be easily repaired thus avoiding replacement of parts, for example the condenser orcompressor due to simple thread damage.
AT41394 for re-threading in inches (male / female)
AT41518 for re-threading in metric (male / female)
AT41394 AT415185/8” 18 UNF M14x1,53/4” 16 UNF M16x1,57/8” 14 UNF M18x1,51” 14 UNF M20x1,51 1/16” UNF M22x1,5
M24x1,5M27x1,5M28x1,5 AT41394
AT41518
PIP
E A
ND
HO
SE
S R
EPA
IRIN
GF 7
SERVICING TOOLS FOR AC SYSTEMS2008
Back
ORIGINAL O-RING KITS, VALVE CAPS, VALVE CORE
Delphi has created kits for OE O-Rings and other parts like caps, valve cores, etc. that are suitable to replace most parts of theoriginal air conditioning system for all automotive applications.
TSP0695001 O-Ring kit Alfa RomeoTSP0695002 O-Ring kit Audi-VolkswagenTSP0695003 O-Ring kit BMWTSP0695004 O-Ring kit Citroën-PeugeotTSP0695005 O-Ring kit Ford (1)TSP0695006 O-Ring kit Ford (2)TSP0695007 O-Ring kit FiatTSP0695008 O-Ring kit MercedesTSP0695009 O-Ring kit Opel (1)TSP0695010 O-Ring kit Opel (2)TSP0695011 O-Ring kit RenaultTSP0695012 O-Ring kit RoverTSP0695013 O-Ring kit Volvo/SaabTSP0695015 Valve core kitTSP0695016 O-Ring kit for compressorsTSP0695017 O-Ring universal kit (1)TSP0695018 Caps for service valves kitTSP0695019 Washer kit for GM compressorsTSP0695020 Double O-Ring kitTSP0695023 Service kit for Ford pipesTSP0695024 Complete service kitTSP0695025 O-Ring kit Suzuki-MitsubishiTSP0695026 O-Ring kit Honda-NissanTSP0695027 O-Ring kit Subaru-ToyotaTSP0695028 O-Ring kit HyundaiTSP0695029 Set of Asian car kits, with holder (compounded of TSP0695025, TSP0695026, TSP0695027 and TSP0695028)TSP0695030 O-Ring universal kit (2)
The showed holder can contain up to 4 kits and can be ordered as TSP0695021.
AC
FLU
SH
ING
G 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
AC FLUSHING KIT - AT41415/1
This kit consists of a 400 cc sturdy alloy bottle (with valve), hose, adapters kit,pistol, clamp and a container for flushing liquid recovery. It can be used with anysuitable cleansing fluid (R141b, etc.) though we recommend AT41425. The flushingliquid is pressurised in the alloy bottle using compressed air or nitrogen through theinlet valve.The kit comes in a handy crate, which keeps all the contents together and alsokeeps the flushing liquid recovery container upright when receiving liquid underpressure.Flushing fluid not included.
AC FLUSHING FLUID - AT41425
This environmentally friendly solvent is non-toxic and contains no polluting substancessuch as surface-active agents, ether glycol or halogen hydrocarbons. It does not destroyor deform elastomer (rubber) and/or synthetic materials. Its flash point of 70°C makes itmuch safer to use than benzene based solvents.It allows for the evacuation of oil and oil particles in suspension from the heat exchangertubes (evaporator and condenser). The solvent drying time is compatible with the normalservicing requirements for AC systems.It is an ideal replacement for CFC-R113 and has excellent cleansing properties and rapidevaporation time. It is compatible with all refrigerants (CFC, HCFC, HFC).Supplied in a 5 litre container.
AC
FLU
SH
ING
G 2
SERVICING TOOLS FOR AC SYSTEMS2008
Back
DIAVIA CLEANER - AT41560
Cleaning station with solvent, designed for maintenance and cleaning of CAR AC systems.Process consists in the circulation of solvent in a pulsating way for loosening and removing impurities.
Main characteristics
• Works with compressed air• Additional pump to purge the solvent• Suitable for every type of fitting, thanks to the universal cone attachment system• 20 lt solvent tank with level gauge• User friendly and effective, thanks to the additional nitrogen circuit, that permits:
- to push out possible residue of solvent and humidity after the purge phase- to check for possible leaks
• Eyeglass to check the solvent cleaness• Quick coupling on solvent/nitrogen circuits• Pressure release safety system• High quality nitrogen and air pressure gauge• 180 cm hoses• High capacity and easy-to-replace filter
Technical data
Working pressure, cleaning circuit Min.-Max. 6-8 barWorking pressure, nitrogen circuit Min.-Max. 8-12 barLiquid circulation max. pressure 17,4 litri/minFiltering system external filterNitrogen circuit gauge 25 bar (360 psi)Cleaning circuit gauge 10 bar (144 psi)Dimensions 120 x 55 x 54,5 cmWeight 46 kg
DIAVIA CLEANER PLUS - AT41568
Cleaning station with solvent, designed for maintenance and cleaning of COACHES and BUS AC systems.Process consists in the circulation of solvent in a pulsating way for loosening and removing impurities.
Main characteristics
• Works with compressed air• Additional pump to purge the solvent• Suitable for every type of fitting, thanks to the universal cone attachment system• 20 lt solvent tank with level gauge• User friendly and effective, thanks to the additional nitrogen circuit, that permits:
- to push out possible residue of solvent and humidity after the purge phase- to check for possible leaks
• Eyeglass to check the solvent cleaness• Quick coupling on solvent/nitrogen circuits• Pressure release safety system• High quality nitrogen and air pressure gauge• 4 mt hoses.• High capacity and easy-to-replace filter
Technical data
Working pressure, cleaning circuit Min.-Max. 6-8 barWorking pressure, nitrogen circuit Min.-Max. 8-12 barLiquid circulation max. pressure 49,2 litri/minFiltering system external filterNitrogen circuit gauge 25 bar (360 psi)Cleaning circuit gauge 10 bar (144 psi)Dimensions 120 x 55 x 54,5 cmWeight 48 kg
CO
MP
RE
SS
OR
S M
AIN
TE
NA
NC
EH 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
COMPRESSOR MAINTENANCE KIT - AT41520
The following electromagnetic compressor clutch assemblies may be changed using this equipment:
Harrison: V5, HDA6, R4, A6.Sanden: SD505, SD507, SD508, SD510, SD575, SD708, SD709, SD7H15, SD5H13Denso: VariousOthers: FS6, C171, 6P148
COMPRESSOR GUARD KIT - AT41569
This kit permits the fitting of a filter on the compressor suction inlet, to avoid the entranceof harmful material that can circulate into the AC system (metallic slags, rubberdrosses,etc).The kit contains the tooling and some filters, available also as spare parts.
OT
HE
RS
I 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
REFRIGERANT GAS ANALYSER - AT41543
This analyser is designed to enable you to avoid contamination of the refrigerant in your machines storage tank, when you recoverrefrigerant from an AC system. When contamination is detected, this information can be used, to help diagnose performanceproblems with the AC system. This unit can also be used to test new refrigerant quality
Very easy to use: only one control (push button). Takes less than 1 minute to analyse therefrigerant and give you the results.
This is a very easily maintained machine requiring the periodic changing of the filter on thefront panel.
The gauge meets the SAE J 1771 regulations.
The analyser has an audible and visual alarm, produced when flammablehydrocarbons > 2% are detected.
It is also provided with a 25 pins port for the connection to an external printer.
Technical data
Refrigerant R12, R134a, R22, HC (hydrocarbons)Other substances Hydrocarbons, AirAccuracy 98% for the gas above,
with system presence of R124 or R142bResolution +/- 0,1 % by weightRepeatability +/- 0,25% by weightMeasurement time Complete test cycle: less than 60 secondsOperating temperatures from +10°C to +49 °CStorage temperatures from -20 °C to +70 °CPower supply (cable for from 12 to 16 Vdc – 1,5 A – 10 wconnection to the vehicle battery)Power supply adapter 220 Volt – 50/60 Hzfor 220 Volt (optional)Dimensions (cm) 20 x 13 x 7Weight 2 Kg
AIR OPERATED HACKSAW - AT41066
Meets with CE requirements. An extremely versatile hacksaw for precise cutting oflaminates and synthetic materials.Air connector: 1/4” GAS
FIN COMB - AT41409
Combs for re-aligning heat exchanger (condenser, evaporator).
OT
HE
RS
I 2
SERVICING TOOLS FOR AC SYSTEMS2008
Back
ORIFICE TUBES REPLACEMENT TOOL - AT41548
This kit was designed to allow easy removal of even seriously damaged expansion tubesand also assists in the replacement of new tubing.
VALVE CORE REMOVERS
For service valve maintenance and replacement. Two kinds of tool are available.
AT41521 for Ford / Renault valves
AT41298 for standard valves
SPECIAL VALVE CORE REMOVERS
These tools (PURGE-MATE™ system) allow the replacement of defective valve cores,without discharging the AC system (valve blocked closed).
AT41540 Service LP valve core
AT41539 Service HP valve core
AT41521
AT41298
AT41539
AT41540
OT
HE
RS
I 3
SERVICING TOOLS FOR AC SYSTEMS2008
Back
SERVICE TOOLS - RETROFIT KIT
Retrofit extension hose - AT41416
This kit is for connecting a modified R12 system to R134a charging unit service valves.The restricted space does not usually permit direct connection to the valves so theextension hoses are connected to the AC unit and then to the R134a recharging unit.
Retrofit kit with standard adapter - AT41417
This kit contains all the necessary materials to convert an R12 system to an R134a. Itcontains all the O-rings, service valve adapter, labels and instructions.N.B.: You will also require Ester Oil for this conversion.
RETROFIT ADAPTERS
Standard
043141/0 Retrofit 1/4” - Straight
Special
AT41421 Retrofit 1/4" - 90°AT41422 Retrofit 3/16"
Retrofit kit - TSP0695022
Contains all adapters necessary for Retrofit.
043141/0
AT41421 AT41422
OT
HE
RS
I 4
SERVICING TOOLS FOR AC SYSTEMS2008
Back
CHARGING ADAPTER EXTENSION - AT41561
This extension allows AC charging on vehicles like:BMW 5 E60/E61 - Ford Galaxy 2006 - Ford S-Max - Volvo S3 - Mercedes SLK R171
RENAULT LAGUNA SERVICE PORT ADAPTER - AT41517
Allows the connection of a tube with standard fittings to the AC system service valves ofpre-2001 Renault Lagunas.
EXTENSION COUPLING KITS
Suitable for reaching service valves, that in some engine compartment are accessible with difficulty.
AT41575 90° 1/4M quick coupling kit
AT41576 180° 1/4M quick coupling kit
SERVICING MATERIALS
0701407R Anti-condensation (9,25 m) 039001D Assortment of general fixtures, washers,070054R Sealant (10x2 - Length = 6 m) cable ties, screws
AT41575
AT41576
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 1
SERVICING TOOLS FOR AC SYSTEMS2008
Back
AT41066 - AIR OPERATED HACKSAW
041067/0 Set 5 blades for laminates041068/0 Set 5 blades for synthetic materials
AT41147 - PORTABLE CHARGING STATION FOR R134a/R22/R407/R507
041146.16 Plexiglass cylinder + scale041147.6 Vacuometer041147.7 LP quick coupling041147.10 Resistor041147.12 Cylinder safety valve041406.19 Vacuum pump041501.5 HP pressure gauge041501.6 LP pressure gauge041501.7 LP blue hose 2000 mm041501.8 HP red hose 2000 mm
AT41353 - FITTINGS FOR DYE INJECTION
041354.1 12 single dose additive capsules
AT41379 - REPAIRING TOOL FOR PRE-FORMED AIR CONDITIONING METAL PIPES
041379.3 Lokprep sealant041379.5 Pair of gripping jaws 8 mm041379.6 Pair of gripping jaws 9,5 - 10 mm041379.7 Pair of gripping jaws 12 - 13 mm041379.8 Pair of gripping jaws 14,5 - 16 mm041379.9 Pair of gripping jaws 18 - 19 mm600STD8 Straight Lokring joint - Brass ∅ 8600STD9 Straight Lokring joint - Brass ∅ 9,53600STD10 Straight Lokring joint - Brass ∅ 10600STD12 Straight Lokring joint - Brass ∅ 12600STD13 Straight Lokring joint - Brass ∅ 13600STD16 Straight Lokring joint - Brass ∅ 16600ALD8 Straight Lokring joint - Aluminium ∅ 8600ALD9 Straight Lokring joint - Aluminium ∅ 9,53600ALD10 Straight Lokring joint - Aluminium ∅ 10600ALD12 Straight Lokring joint - Aluminium ∅ 12600ALD13 Straight Lokring joint - Aluminium ∅ 13600ALD15 Straight Lokring joint - Aluminium ∅ 15600ALD16 Straight Lokring joint - Aluminium ∅ 16600ALD18 Straight Lokring joint - Aluminium ∅ 18600ALD19 Straight Lokring joint - Aluminium ∅ 19600STC9 90° Lokring joint - Brass ∅ 9,53600STC10 90° Lokring joint - Brass ∅ 10600STC12 90° Lokring joint - Brass ∅ 12600STC13 90° Lokring joint - Brass ∅ 13600STC16 90° Lokring joint - Brass ∅ 16600STVA9 Lokring joint with R134a valve - Brass ∅ 9,53600STVP9 Lokring joint with R134a valve - Brass ∅ 9,53600STVA10 Lokring joint with R134a valve - Brass ∅ 10600STVP10 Lokring joint with R134a valve - Brass ∅ 10600STVA12 Lokring joint with R134a valve - Brass ∅ 12600STVA13 Lokring joint with R134a valve - Brass ∅ 13600STVA16 Lokring joint with R134a valve - Brass ∅ 16600ALVA9 Lokring joint with R134a valve - Aluminium ∅ 9,53600ALVA10 Lokring joint with R134a valve - Aluminium ∅ 10600ALVA12 Lokring joint with R134a valve - Aluminium ∅ 12600ALVA13 Lokring joint with R134a valve - Aluminium ∅ 13600ALVA16 Lokring joint with R134a valve - Aluminium ∅ 16600STR10.9 Reduction - Brass ∅ 10-9,53600STR12.10 Reduction - Brass ∅ 12-10600STR13.9 Reduction - Brass ∅ 12,7-9,53600STR13.10 Reduction - Brass ∅ 12,7-10600STR13.12 Reduction - Brass ∅ 12,7-12600STR16.12 Reduction - Brass ∅ 15,8/16-12600STR16.13 Reduction - Brass ∅ 15,8/16-12,7600ALR12.10 Reduction - Aluminium ∅ 12-10600ALR13.9 Reduction - Aluminium ∅ 12,7-9,53600ALR13.10 Reduction - Aluminium ∅ 12,7-10600ALR16.13 Reduction - Aluminium ∅ 15,8/16-12,7600AL9 Lokring joint with sleeve - Aluminium ∅ 9,53600AL13 Lokring joint with sleeve - Aluminium ∅ 13600AL16 Lokring joint with sleeve - Aluminium ∅ 16600AL19 Lokring joint with sleeve - Aluminium ∅ 19
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 2
SERVICING TOOLS FOR AC SYSTEMS2008
Back
AT41397 - CRIMPER
041396.1 Threaded adapter041396.2 Fixing key041397.1 5/16 -06 jaw couple -yellow041397.2 13/32 - 08 jaw couple - red041397.3 1/2 - 10 jaw couple - green041397.4 3/4 - 12 jaw couple - blue041397.5 5/16 - 06 rubber for jaws - yellow041397.6 13/32 - 08 rubber for jaws - red041397.7 1/2 -10 rubber for jaws041397.8 3/4 - 12 rubber for jaws041397.10 Special oil041397.12 Bracket cover041397.13 Guide bracket kit041519.1 5/16 - 06 rid. jaw couple - white041519.2 1/2 - 10 rid. jaw couple - black041519.3 5/16 - 06 rid. rubber for jaws - white041519.4 1/2 - 10 rid. rubber for jaws - black
AT41415/1 - AC FLUSHING KIT
041415/1.1 Aluminium bottle041415/1.2 Flushing control041415/1.3 Yellow connection hose041415/1.4 Joint for small hose041415/1.5 Joint for medium hose041415/1.6 Joint for large hose041415/1.7 Hose for recovered flushing liquid041415/1.8 Recovery liquid hose with fittings
AT41440 - FITTINGS FOR ORIGINAL PIPES REPLACEMENT - ALFA ROMEO, FIAT and LANCIA
AT41441 180° G06 adapter + flangeAT41442 180° G08 adapter + flangeAT41443 180° G10 adapter + flangeAT41444 180° G06 adapter + flangeAT41445 90° G06 adapterAT41446 90° G08 adapterAT41447 90° G10 adapterAT41448 90° G06 receiver drier adapterAT41449 90° G06 evaporator adapterAT41450 90° G10 evaporator adapterAT41451 Evaporator flangeAT41452 Screws TBEI 6x25
AT41470 - FITTINGS FOR ORIGINAL PIPES REPLACEMENT - AUDI
AT41457 180° adapter + flangeAT41458 90° G08 adapter + flangeAT41486 90° G10 compressor adapterAT41487 90° G10 receiver drier/compressor adapterAT41488 180° G10 receiver drier/compressor adapterAT41489 90° G08 compressor adapterAT41490 90° G08 compressor/condenser adapterAT41491 180° G08 compressor/condenser adapterAT41492 180° G08 condenser/evaporator adapterAT41493 90° G10 receiver drier/compressor adapterAT41494 180° G10 evaporator/receiver drier adapter
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 3
SERVICING TOOLS FOR AC SYSTEMS2008
Back
AT41480 - FITTINGS FOR ORIGINAL PIPES REPLACEMENT - VOLKSWAGEN
AT41453 180° G10 adapter + flangeAT41454 90° G10 adapterAT41455 90° G10 adapterAT41456 90° G08 adapterAT41457 180° adapter + flangeAT41458 90° G08 adapter + flangeAT41459 180° G06 expansion valve adapterAT41467 180° G10 expansion valve adapterAT41468 90° G10 adapterAT41469 Expansion valve flangeAT41471 3/8 receiver drier adapterAT41472 180° adapter + flangeAT41473 180° adapter + flangeAT41474 90° G06 expansion valve adapterAT41475 90° G06 adapterAT41476 180° G06 adapterAT41477 90° adapterAT41478 90° adapterAT41479 180° G10 compressor adapterAT41481 180° G08 compressor adapterAT41482 Compressor flange
AT41497 - FITTINGS FOR ORIGINAL PIPES REPLACEMENT - ALHAMBRA, GALAXY E SHARAN
AT41459 180° G06 expansion valve adapterAT41467 180° G10 expansion valve adapterAT41469 Expansion valve flangeAT41474 90° G06 expansion valve adapterAT41479 180° G10 Compressor adapterAT41481 180° G08 compressor adapterAT41482 Compressor flangeAT41495 90° G10 compressor adapterAT41496 90° G08 compressor adapterAT41498 G06 F Spring-Lock adapterAT41499 G08 F Spring-Lock adapterAT41503 G08 M Spring-Lock adapterAT41504 G10 M Spring-Lock adapterAT41505 G10 F Spring-Lock adapterAT41506 90° G08 condenser adapterAT41507 90° G06 VW condenser adapterAT41508 VW Receiver drier flangeAT41509 ClampsAT41510 G06 M Spring-Lock adapter
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 4
SERVICING TOOLS FOR AC SYSTEMS2008
Back
AT41500 - REFMATIC TOP
041197/0 Oil for vacuum pump041406.13 Scale assembly 60 kg041406.27 Hose car 900 90°+straight check valve041408UK.3 Valve coil041430.11 Inlet filter041500.1 Main circuit board041500.2 Switch041500.4 Scale assembly 15 kg041500.5 Vacuum pump041500.8 Expansion valve041500.10 Condenser041500.11 Hose 300 90°+straight 1/4041500.14 Pressur sensor -1/10 bar041500.15 Check valve kit041500.19 Heating belt kit for 20 kg tank041500.21 HP red hose - 2,5 m041500.22 LP blue hose - 2,5 m041500.27 58 mm paper rolls pack for printer (4 pcs)041501.1 Filter041501.5 HP pressure gauge (male)041501.6 LP pressure gauge (male)041501.20 Whell with brake041501.21 Big wheel041501.24 HP quick coupling041501.25 LP quick coupling R134a041501.26 Tank fittings kit041501.31 Bottle storage for oil draining041501.32 Plastic cover041501.39 4,5 mm valve piston041501.40 2,5/3 mm valve piston041501.43 LP pressure gauge (female)041501.44 HP pressure gauge (female)041501.45 Non-condensibles purging valve 16,8 bar041501.46 Safety valve 20 bar041501.49 Hose 600 90°+straight 1/4 with valve041501.50 Red plate kit - Small lever (10 pcs)041501.51 Blue plate kit - Small lever (10 pcs)041501.53 Small lever kit for faucet (10 pcs)041501.54 Large lever kit for faucet (10 pcs)041501.55 Red plate kit - Large lever (10 pcs)041501.56 Blue plate kit - Large lever (10 pcs)
AT41500A - REFMATIC ACTIVE
041197/0 Oil for vacuum pump041406.1 Compressor041406.9 Refrigerant tank 12,4 l 20 bar041406.13 Scale assembly 60 kg041406.25 Solenoid valve041430.1 Gasket for 1/4” hose (50 pcs)041430.11 Inlet filter041500.4 Scale assembly 15 kg041500.8 Expansion valve041500.11 Tubo 300 90°+d 1/4041500.15 Check valve kit041500.25 Main circuit board041500.27 58 mm paper rolls pack for printer (4 pcs)041500.28 PC type change switch041500.30 2.5 m feeding cable041500.31 LP blue hose 3 m041500.32 HP red hose 3 m041500.33 Hose 500 straight+straight with valve and check valve041500.34 Front panel041500.35 Upper panel041500.36 Oil bottle (2 pcs.)041500.37 Bottle storage for draining oil041500P/08 Memory card041501.4 Pressure gauge (0/25 bar + psi D50 1/4SAE)041501.5 HP pressure gauge (male)041501.6 LA pressure gauge (male)041501.21 Wheel041501.24 HP quick coupling041501.25 LP quick coupling041501.26 Fitting kit for refrigerant tank041501.27 Hose 500 straight+straight 1/4 with valve041501.39 4,5 mm valve piston041501.40 2,5/3 mm valve piston041501.45 Non-condensibles purging valve 16,8 bar041501.46 Safety valve 20 bar041501.50 Red plate kit - Small lever (10 pcs)041501.51 Blue plate kit - Small lever (10 pcs)041501.53 Small lever kit for faucet (10 pcs)
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 5
SERVICING TOOLS FOR AC SYSTEMS2008
Back
AT41500E - REFMATIC EVO
041197/0 Oil for vacuum pump041406.9 Refrigerant tank. 10 kg/12,7 l041406.13 Scale assembly 60 kg041406.19 Vacuum pump041406.21 Safety valve 16 bar041406.27 Hose 900 90°+straight with check valve041408UK.3 Valve coil041430.11 Inlet filter041500.1 Main circuit board041500.2 Switch041500.4 Scale assembly 15 kg041500.8 Expansion valve041500.10 Condenser041500.11 Hose 300 90°+straight 1/4041500.15 Check valve kit041500.20 Heating belt kit for 10 kg tank041500.21 HP red hose - 2500 mm041500.22 LP blue hose - 2500 mm041500.27 58 mm paper rolls pack for printer (4 pcs)041501.1 Filter041501.5 HP pressure gauge (male)041501.6 LP pressure gauge (male)041501.20 Wheel with brake041501.21 Big wheel041501.24 HP quick coupling041501.25 LP quick coupling041501.26 Tank fittings kit041501.31 Bottle for oil draining041501.32 Plastic cover041501.35 Non-condensibles purging valve041501.39 4,5 mm valve piston041501.40 2,5/3 mm valve piston041501.43 LP pressure gauge (female)041501.44 HP pressure gauge (female)041501.49 Hose 600 90°+straight 1/4 with valve041501.50 Red plate kit - Small lever (10 pcs)041501.51 Blue plate kit - Small lever (10 pcs)041501.53 Small lever kit for faucet (10 pcs)041501.54 Large lever kit for faucet (10 pcs)041501.55 Red plate kit - Large lever (10 pcs)041501.56 Blue plate kit - Large lever (10 pcs)
AT41500P - REFMATIC POWER
041197/0 Oil for vacuum pump041406.13 Scale assembly 60 kg041406.25 Solenoid valve041430.1 Gasket for 1/4” hose (50 pcs)041430.11 Inlet filter041500.4 Scale assembly 15 kg041500.8 Expansion valve041500.11 Hose 300 90°+straight 1/4041500.15 Check valve kit041500.19 Heating belt kit for 20 kg refrigerant tank041500.25 Main circuit board041500.27 58 mm paper rolls pack for printer (4 pcs)041500.28 PC type change switch041500.30 2.5 m feeding cable041500.31 LP blue hose 3 m041500.32 HP red hose 3 m041500.33 Hose 500 straight+straight with valve and check valve041500.34 Front panel041500.35 Upper panel041500.36 Oil bottle (2 pcs)041500.37 Bottle storage for draining oil041500P/08 Memory card041501.4 Pressure gauge (0/25 bar + psi D50 1/4SAE)041501.5 HP pressure gauge (male)041501.6 LP pressure gauge (male)041501.21 Wheel041501.24 HP quick coupling041501.25 LP quick coupling041501.26 Fitting kit for refrigerant tank041501.27 Hose 500 straight+straight 1/4 with valve041501.39 4,5 mm valve piston041501.40 2,5/3 mm valve piston041501.45 Non-condensibles purging valve 16,8 bar041501.46 Safety valve 20 bar041501.50 Red plate kit - Small lever (10 pcs)041501.51 Blue plate kit - Small lever (10 pcs)041501.53 Blue plate kit - Large lever (10 pcs)
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 6
SERVICING TOOLS FOR AC SYSTEMS2008
Back
AT41502 - REFMATIC PLUS
041197/0 Oil for vacuum pump041406.9 Refrigerant tank 10 kg / 12,7 l041406.13 Scale assembly 60 kg041406.19 Vacuum pump041406.21 Safety valve041408UK.3 Valve coil041408UK.5 Main circuit board (until a S/N A2 240090)041501.57 Main circuit board (from S/N A1 154001 and A2 155163)041430.18 Check valve 2F 1/4"SAE041500.2 Switch041500.11 Hose 300 90°+straight 1/4041501.1 Filter041501.2 Recovery system assembly041501.43 LP pressure gauge (until S/N A1 240090 and A2 25531)041501.6 LP pressure gauge (from S/N A1154001 and A2 23124)041501.44 HP pressure gauge (until S/N A1 240090 and A2 25531)041501.5 HP pressure gauge (from S/N A1154001 and A2 23124)041501.7 LP blue hose 2 m041501.8 HP red hose 2 m041501.9 Manifold gauge hose 2 m041501.12 Manifold gauges assembly (until S/N A1 240090 and A2 25531)041501.14 Check valve M/F 1/8’NBR041501.20 Wheel with brake041501.21 Big wheel041501.24 HP quick coupling041501.25 LP quick coupling041501.26 Tank fittings kit041501.27 Hose 500 straight+straight 1/4 with valve041501.29 Ball faucet 6300 1/8 red041501.30 Ball faucer 6450 1/8 yellow041501.31 Bottle for draining oil041501.32 Plastic cover041501.35 Non-condensibles purging valve041501.37 Oil injection system041501.39 4,5 mm valve piston041501.40 2,5/3 mm valve piston041501.41 Hose 600 90°+straight with check valve041501.42 Polycarbonate panel board (until S/N A2 240090)041501.48 Polycarbonate panel board (from S/N A1154001 and A2 23124)041501.49 Hose 600 90°+straight 1/4 with valve041501.50 Red plate kit - Small lever (10 pcs)041501.51 Blue plate kit - Small lever (10 pcs)041501.52 Yellow plate kit - Small lever (10 pcs)041501.53 Small lever kit for faucet (10 pcs)041501.54 Large lever kit for faucet (10 pcs)041501.55 Red plate kit - Large lever (10 pcs)041501.56 Blue plate kit - Large lever (10 pcs)041502.2 Solenoid valves assembly041502.3 Vacuum pump protection switch
AT41522 - REFMATIC FRIGO
041522.1 Pressure gauge041522.2 R404 suction unit041522.3 Pressure switch 25/31 bar041522.4 Solenoid valves assembly R404041522.5 Safety valve 31 bar041522.6 Progressive breather valve 25 bar041522.7 Tank R404 12,5 L 31 Bbar
AT41532 - AIR SANITIZER
041532.1 Chip
AT41543 - REFRIGERANT GAS ANALYSER
041543.1 Filter041543.2 Hose for R134a041543.3 Hose for R12041543.4 Cable for 12V supply041543.5 Adapter for 220V041543.6 Adapter for 220V UK
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 7
SERVICING TOOLS FOR AC SYSTEMS2008
Back
AT41544 - PORTABLE REFRIGERANT RECOVERY UNIT
041544.1 Filter041544.3 Hoses Kit
AT41549 - UV LAMP WITH SUPPLY CABLE AND GOGGLES
041532.1 Lamp041532.2 Lens
AT41550 - COMPLETE KIT UV LAMP + FITTING FOR DYE INJECTION
041537.1 R134a adapter041537.2 Hose041537.3 R12 adapter041537.4 Purge valve041537.5 Dye bottle (64 doses)
AT41551 - MANUAL INJECTION SYSTEM FOR DYES (GUN + DYE BOTTLE)
041537.1 R134a adapter041537.2 Hose041537.3 R12 adapter041537.4 Purge valve041537.5 Dye bottle (64 doses)
AT41560 - DIAVIA CLEANER
041550/0 Universal cone041551/0 Hoses set 4 m041552/0 Hoses set 1,80 mHDF296 Filter
AT41568 - DIAVIA CLEANER PLUS
041550/0 Universal cone041551/0 Hoses set 4 mHDF296 Filter
AT41569 - COMPRESSOR GUARD KIT
041569.1 Compressor guard ∅ 10,03mm041569.2 Compressor guard ∅ 10,26mm041569.3 Compressor guard ∅ 11,07mm041569.4 Compressor guard ∅ 11,76mm041569.5 Compressor guard ∅ 11,96mm041569.6 Compressor guard ∅ 12,50mm041569.7 Compressor guard ∅ 12,70mm041569.8 Compressor guard ∅ 12,95mm041569.9 Compressor guard ∅ 13,23mm041569.10 Compressor guard ∅ 13,49mm041569.11 Compressor guard ∅ 13,67mm041569.12 Compressor guard ∅ 14,02mm041569.13 Compressor guard ∅ 14,25mm041569.14 Compressor guard ∅ 14,70mm041569.15 Compressor guard ∅ 14,93mm041569.16 Compressor guard ∅ 15,11mm041569.17 Compressor guard ∅ 15,24mm041569.18 Compressor guard ∅ 15,70mm041569.19 Compressor guard ∅ 16,48mm041569.20 Compressor guard ∅ 20,85mm
AT41570 - ELECTRONIC LEAK DETECTOR
041533.1 Sensor
AT41573 - PRINTER
041500.27 58 mm paper rolls pack for printer (4 pcs)
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 8
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TSP0695001 - O-RING KIT ALFA ROMEO
0695106/0 O-ring0695113/0 O-ring0695117/0 O-ring0695120/0 O-ring0695125/0 O-ring0695131/0 O-ring0695138/0 O-ring0695103/0 O-ring0695105/0 O-ring0695111/0 O-ring0695146/0 O-ring0695147/0 O-ring0695149/0 O-ring0695155/0 O-ring0695172/0 valve0695165/0 cap0695168/0 cap0695169/0 cap
TSP0695002 - O-RING KIT AUDI - VOLKSWAGEN
0695106/0 O-ring0695107/0 O-ring0695108/0 O-ring0695117/0 O-ring0695125/0 O-ring0695127/0 O-ring0695131/0 O-ring0695134/0 O-ring0695135/0 O-ring0695138/0 O-ring0695139/0 O-ring0695141/0 O-ring0695152/0 O-ring0695155/0 O-ring0695165/0 cap0695166/0 cap0695167/0 cap0695170/0 cap0695171/0 cap0695172/0 valve0695173/0 valve
TSP0695003 - O-RING KIT BMW
0695117/0 O-ring0695120/0 O-ring0695125/0 O-ring0695130/0 O-ring0695131/0 O-ring0695138/0 O-ring0695144/0 O-ring0695145/0 O-ring0695147/0 O-ring0695152/0 O-ring0695161/0 O-ring0695165/0 cap0695168/0 cap0695169/0 cap0695172/0 valve0695186/0 O-ring0695188/0 O-ring
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 9
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TSP0695004 - O-RING KIT CITROEN-PEUGEOT
0695106/0 O-ring0695108/0 O-ring0695117/0 O-ring0695125/0 O-ring0695131/0 O-ring0695138/0 O-ring0695155/0 O-ring0695165/0 cap0695168/0 cap0695169/0 cap0695172/0 valve0695185/0 valve
TSP0695005 - O-RING KIT FORD (1)
0695138/0 O-ring0695143/0 O-ring0695155/0 O-ring0695165/0 cap0695168/0 cap0695169/0 cap0695170/0 cap0695171/0 cap0695172/0 valve0695173/0 valve0695175/0 O-ring0695176/0 O-ring0695177/0 O-ring0695178/0 O-ring
TSP0695006 - O-RING KIT FORD (2)
0695103/0 O-ring0695106/0 O-ring0695107/0 O-ring0695110/0 O-ring0695111/0 O-ring0695113/0 O-ring0695115/0 O-ring0695117/0 O-ring0695120/0 O-ring0695122/0 O-ring0695123/0 O-ring0695125/0 O-ring0695131/0 O-ring0695133/0 O-ring0695138/0 O-ring0695144/0 O-ring0695162/0 O-ring0695163/0 O-ring
TSP0695007 - O-RING KIT FIAT
0695101/0 O-ring0695103/0 O-ring0695106/0 O-ring0695107/0 O-ring0695117/0 O-ring0695120/0 O-ring0695123/0 O-ring0695125/0 O-ring0695131/0 O-ring0695138/0 O-ring0695147/0 O-ring0695148/0 O-ring0695149/0 O-ring0695150/0 O-ring0695165/0 cap0695166/0 cap0695167/0 cap0695172/0 valve
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 10
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TSP0695008 - O-RING KIT MERCEDES
0695104/0 O-ring0695108/0 O-ring0695116/0 O-ring0695117/0 O-ring0695125/0 O-ring0695128/0 O-ring0695131/0 O-ring0695138/0 O-ring0695139/0 O-ring0695149/0 O-ring0695156/0 O-ring0695157/0 O-ring0695165/0 cap0695168/0 cap0695169/0 cap0695172/0 valve0695186/0 O-ring0695187/0 O-ring0695189/0 O-ring
TSP0695009 - O-RING KIT OPEL (1)
0695106/0 O-ring0695109/0 O-ring0695112/0 O-ring0695114/0 O-ring0695115/0 O-ring0695117/0 O-ring0695120/0 O-ring0695125/0 O-ring0695131/0 O-ring0695138/0 O-ring0695144/0 O-ring0695145/0 O-ring0695146/0 O-ring0695153/0 O-ring0695154/0 O-ring0695158/0 O-ring0695159/0 O-ring0695164/0 O-ring
TSP0695010 - O-RING KIT OPEL (2)
0695136/0 O-ring0695148/0 O-ring0695149/0 O-ring0695151/0 O-ring0695152/0 O-ring0695155/0 O-ring0695156/0 O-ring0695157/0 O-ring0695163/0 O-ring0695165/0 cap0695166/0 cap0695167/0 cap0695172/0 valve0695174/0 valve0695179/0 O-ring0695180/0 O-ring0695181/0 O-ring0695182/0 nipple0695183/0 nipple
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 11
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TSP0695011 - O-RING KIT RENAULT
0695101/0 O-ring0695106/0 O-ring0695113/0 O-ring0695117/0 O-ring0695120/0 O-ring0695125/0 O-ring0695131/0 O-ring0695138/0 O-ring0695147/0 O-ring0695148/0 O-ring0695149/0 O-ring0695160/0 O-ring0695161/0 O-ring0695165/0 cap0695166/0 cap0695167/0 cap0695172/0 valve0695184/0 valve
TSP0695012 - O-RING KIT ROVER
0695103/0 O-ring0695106/0 O-ring0695109/0 O-ring0695111/0 O-ring0695112/0 O-ring0695113/0 O-ring0695117/0 O-ring0695118/0 O-ring0695120/0 O-ring0695124/0 O-ring0695125/0 O-ring0695130/0 O-ring0695131/0 O-ring0695138/0 O-ring0695155/0 O-ring0695160/0 O-ring0695165/0 cap0695168/0 cap0695169/0 cap0695172/0 valve
TSP0695013 - O-RING KIT VOLVO/SAAB
0695102/0 O-ring0695106/0 O-ring0695108/0 O-ring0695119/0 O-ring0695121/0 O-ring0695126/0 O-ring0695129/0 O-ring0695132/0 O-ring0695137/0 O-ring0695140/0 O-ring0695142/0 O-ring0695144/0 O-ring0695151/0 O-ring0695153/0 O-ring0695155/0 O-ring0695165/0 cap0695168/0 cap0695169/0 cap0695172/0 valve0695185/0 valve
TSP0695015 - VALVE CORE KIT
0695172/0 valve0695173/0 valve0695185/0 valve0695204/0 valve0695205/0 valve0695206/0 valve
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 12
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TSP0695016 - O-RING KIT FOR COMPRESSORS
0695214/0 O-ring0695215/0 O-ring0695216/0 O-ring0695217/0 O-ring0695218/0 O-ring0695219/0 O-ring0695220/0 O-ring0695221/0 O-ring0695222/0 O-ring0695223/0 O-ring0695224/0 O-ring0695225/0 O-ring0695226/0 O-ring0695227/0 O-ring0695228/0 O-ring0695229/0 O-ring0695230/0 O-ring0695231/0 O-ring0695232/0 O-ring0695233/0 O-ring0695234/0 O-ring0695235/0 O-ring0695236/0 O-ring0695237/0 O-ring
TSP0695017 - O-RING UNIVERSAL KIT
0695101/0 O-ring0695102/0 O-ring0695103/0 O-ring0695104/0 O-ring0695105/0 O-ring0695106/0 O-ring0695108/0 O-ring0695111/0 O-ring0695113/0 O-ring0695116/0 O-ring0695121/0 O-ring0695125/0 O-ring0695130/0 O-ring0695136/0 O-ring0695138/0 O-ring0695139/0 O-ring0695142/0 O-ring0695144/0 O-ring0695145/0 O-ring0695147/0 O-ring0695149/0 O-ring0695155/0 O-ring0695240/0 O-ring0695276/0 O-ring
TSP0695018 - CAPS FOR SERVICE VALVES KIT
0695165/0 cap0695166/0 cap0695167/0 cap0695168/0 cap0695169/0 cap0695170/0 cap0695171/0 cap0695207/0 cap0695208/0 cap0695209/0 cap0695285/0 cap0695286/0 cap
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 13
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TSP0695019 - WASHER KIT FOR GM COMPRESSORS
0695179/0 O-ring0695180/0 O-ring0695181/0 O-ring0695182/0 nipple0695183/0 nipple0695201/0 O-ring0695202/0 O-ring0695203/0 O-ring0695277/0 O-ring0695278/0 O-ring0695279/0 O-ring0695280/0 O-ring
TSP0695020 - DOUBLE O-RING KIT
0695260/0 O-ring0695261/0 O-ring0695262/0 O-ring0695263/0 O-ring0695264/0 O-ring0695265/0 O-ring0695266/0 O-ring0695267/0 O-ring0695291/0 O-ring0695292/0 O-ring0695293/0 O-ring0695294/0 O-ring
TSP0695022 - RETROFIT KIT
0695257/0 Adapter0695258/0 Adapter0695259/0 Adapter0695268/0 Adapter0695269/0 Adapter0695270/0 Adapter0695271/0 Adapter0695272/0 Adapter
TSP0695023 - SERVICE KIT FOR FORD PIPES
0695104/0 O-ring0695116/0 O-ring0695125/0 O-ring0695138/0 O-ring0695175/0 O-ring0695176/0 O-ring0695177/0 O-ring0695178/0 O-ring0695281/0 springlock0695282/0 springlock0695283/0 springlock0695284/0 springlock
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 14
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TSP0695024 - COMPLETE SERVICE KIT
0695165/0 cap0695166/0 cap0695167/0 cap0695168/0 cap0695169/0 cap0695170/0 cap0695171/0 cap0695172/0 valve0695173/0 valve0695174/0 valve0695185/0 valve0695205/0 valve0695206/0 valve0695207/0 cap0695208/0 cap0695285/0 cap0695286/0 cap0695287/0 HP valve0695288/0 BP valve0695289/0 HP valve0695290/0 BP valve
TSP0695025 - O-RING KIT SUZUKI-MITSUBISHI
0695101/0 O-ring0695104/0 O-ring0695106/0 O-ring0695112/0 O-ring0695113/0 O-ring0695116/0 O-ring0695121/0 O-ring0695123/0 O-ring0695125/0 O-ring0695129/0 O-ring0695137/0 O-ring0695138/0 O-ring0695145/0 O-ring0695147/0 O-ring0695155/0 O-ring0695166/0 cap0695167/0 cap0695172/0 valve0695173/0 valve0695177/0 O-ring0695253/0 O-ring0695285/0 cap0695286/0 cap
TSP0695026 - O-RING KIT HONDA-NISSAN
0695103/0 O-ring0695104/0 O-ring0695106/0 O-ring0695112/0 O-ring0695113/0 O-ring0695116/0 O-ring0695121/0 O-ring0695125/0 O-ring0695128/0 O-ring0695137/0 O-ring0695138/0 O-ring0695145/0 O-ring0695147/0 O-ring0695148/0 O-ring0695150/0 O-ring0695160/0 O-ring0695166/0 cap0695167/0 cap0695172/0 valve0695173/0 valve0695276/0 O-ring0695285/0 cap0695286/0 cap
SPA
RE
PA
RT
S F
OR
SE
RV
ICIN
G T
OO
LSL 15
SERVICING TOOLS FOR AC SYSTEMS2008
Back
TSP0695027 - O-RING KIT SUBARU-TOYOTA
0695101/0 O-ring0695104/0 O-ring0695105/0 O-ring0695106/0 O-ring0695112/0 O-ring0695113/0 O-ring0695116/0 O-ring0695124/0 O-ring0695125/0 O-ring0695127/0 O-ring0695129/0 O-ring0695137/0 O-ring0695138/0 O-ring0695145/0 O-ring0695147/0 O-ring0695155/0 O-ring0695166/0 cap0695167/0 cap0695172/0 valve0695173/0 valve0695185/0 valve0695274/0 O-ring0695276/0 O-ring0695285/0 cap0695286/0 cap
TSP0695028 - O-RING KIT HYUNDAI
0695104/0 O-ring0695106/0 O-ring0695107/0 O-ring0695116/0 O-ring0695117/0 O-ring0695123/0 O-ring0695125/0 O-ring0695133/0 O-ring0695137/0 O-ring0695138/0 O-ring0695147/0 O-ring0695148/0 O-ring0695155/0 O-ring0695172/0 valve0695177/0 O-ring0695178/0 O-ring0695273/0 O-ring0695275/0 O-ring0695285/0 cap0695286/0 cap
TSP0695030 - O-RING UNIVERSAL KIT
0695223/0 O-ring0695230/0 O-ring0695231/0 O-ring0695233/0 O-ring0695238/0 O-ring0695239/0 O-ring0695240/0 O-ring0695241/0 O-ring0695242/0 O-ring0695243/0 O-ring0695244/0 O-ring0695245/0 O-ring0695246/0 O-ring0695247/0 O-ring0695248/0 O-ring0695249/0 O-ring0695250/0 O-ring0695251/0 O-ring0695252/0 O-ring0695253/0 O-ring0695254/0 O-ring0695255/0 O-ring
DELPHI Product & Service SolutionsVia Nobili, 2 - 40062 Molinella (BO) - Italy
Tel. +39 051 6906111 - Fax +39 051 6906314www.delphidiavia.it