abstract rethinking schools: a system of adaptable …
TRANSCRIPT
ABSTRACT
Title of Document: RETHINKING SCHOOLS: A SYSTEM OF
ADAPTABLE DESIGN Laura Williams, Master of Architecture, 2010 Directed By: Assistant Professor, Isaac Williams,
School of Architecture, Planning, and Preservation
This thesis rethinks how schools adapt to change, by exploring themes of
flexibility and adaptability. Flexibility in the short term allows learning spaces
to be a platform for changing pedagogy or technology. In addition, adaptability
in the long term allows for the architecture to absorb changes in enrollment.
Education facilities around the world are constantly fluctuating between being
over-crowded and under utilized. This thesis explores opportunities for the
architecture of the school, from the master planning and organization of
program to the construction methods of the building, to adapt to this change.
A systematic approach is established where a pre-fabricated kit of parts is
defined and utilized to create learning communities, which incrementally
expand or contract from the core of the school. This thesis proposes this
system of adaptable design as a solution to optimizing space utilization in
public schools, grades pre-kindergarten through eight, in Washington D.C.
RETHINKING SCHOOLS: A SYSTEM OF ADAPTABLE DESIGN
By
Laura Alison Williams
Thesis submitted to the Faculty of the Graduate School of the University of Maryland, College Park, in partial fulfillment
of the requirements for the degree of Master of Architecture
2010 Advisory Committee: Isaac Williams, Chair Ralph Bennett Matthew Bell
ii
Preface
“The difficulty of accurately predicting enrollment at particular facilities necessitates a flexible and iterative facilities planning process. We will need to reassess school-level trends on a regular basis and adjust facilities plans accordingly, including entertaining new and creative ways of utilizing space.”
-DCPS Master Facilities Plan 20081
How to use the space in schools, with constantly changing enrollment
size has been a struggle for both educators and designers. In addition, the
constant social, cultural, economic, and technological changes creates an
environment where new ideas of what and how to teach generate new ideas
of how the space should be used. This thesis explores themes of flexibility
and adaptability in architecture to create a system that allows schools to
adapt to the constantly changing future.
In 1998, the average age of school buildings was 42 years with most
public schools built between 1950-1970.2 During this time, the focus was to
creating enough space to fit the baby boomer generation by building large
and fast. As a result, standardized school buildings were massed produced,
leading to a lack of individuality and experimentation. In more recent history,
there has been a similar outlook on the disposable nature and unimportance
of school buildings, even though about a quarter of the U.S. population
1 DCPS Master Facilities Plan 2008, Data and Demographics, pg. 1 2 www.ncef.org, Data and Statistics
iii
spends their time in K-12 schools.3 In 2006, about 300,000 portable
classrooms were in use by the United States public school system.4 Even
though these do not make ideal learning environments, these temporary
additions are used universally because their assembly is quick and
inexpensive. This is the current solution for how schools can quickly expand
and contract as the enrollment changes.
A major problem is school planning is that enrollment is hard to predict
from year to year. During the 2007-2008 school year, 2,120 schools were
closed nationwide and 1,927 were opened with planning for 460 more.5 There
is an issue of under enrollment in some schools, causing these schools to
close and the students to consolidate. In D.C. alone, twenty-three schools
were closed before the 2008-2009 school year.6 In addition, the general lack
of satisfaction with the state of existing schools leads to new construction.
The distribution of school age children is not a problem that be solved by
architecture, but it presents the opportunity to rethink how schools can adapt
to the inevitable, yet unpredictable, conditions of varying enrollment.
The complexity of the changes that affect schools is not limited to
enrollment size. Although the way educators teach and what they teach has
changed, the educational spaces have remained largely the same. In order
for the school to be relevant as our culture continually progresses, the school
3 http://www.usgbc.org LEED for Educational Facilities 4 www.ncef.org; Data and Statistics 5 www.ncef.org. Data and Statistics 6 DCPS Master Facilities Plan 2010
iv
must adapt to changes in technology and pedagogy, but be simultaneously
independent from any specific form of either.
Although the thesis will be tested using two case studies, this research
is intended to be broadly applicable to the national problem of over-crowded
and under-utilized educational facilities. The thesis will propose design
principles and diagrams, which should be considered by designers facing this
problem in the future. These principles will not denote a style or form of the
building, but will be a broadly applicable set of diagrams that should consider
the specifics of the site, city, school, and other contextual opportunities.
In Chapter 5, a systematic approach is established where a pre-
fabricated kit of parts is defined and utilized to create learning communities,
which incrementally expand or contract from the core of the school. In order
to test these ideas, the thesis will show how this concept can be applied to
two case studies. The first case study look at an open site where the entire
school is designed using the system. The second case study tests how an
existing school can expand using the system. Both schools are pre-
kindergarten through eighth grade education campuses in Washington D.C.
The goal of the case studies is to illustrate how the system of incremental
expansion can be adapted to site and context, to give schools a way to
expand or contract without sacrificing their individuality.
vi
Acknowledgements
Above all I would like to credit my committee for all the great feedback and
suggestions throughout the process: Isaac Williams, Ralph Bennett, and
Matthew Bell
In addition, David Lopez and Jon Tung went above and beyond to provide
consultations on prefabrication and structure.
Colden Florence, KEA professor, for his support and feedback
James Norwood for his assistance before the public review.
My family and friends for their support.
vii
Table of Contents Preface ............................................................................................................ ii Acknowledgements ........................................................................................ vi Table of Contents .......................................................................................... vii Chapter 1: Utilization of Space in Schools ....................................................... 1
1.1: Effect of Changing Enrollment .............................................................. 1 1.1.2 Under-enrollment ............................................................................. 4
1.2 Permanent Solutions in Recent History ................................................. 5 1.3 Prefabricated Solutions in Recent History .............................................. 7
Chapter 2: Exploring Opportunities of Prefabrication ..................................... 10 Chapter 3: Pedagogy, Technology, and Architecture of Schools................... 12
3.1 Changes in Technology ....................................................................... 12 3.2 Changes in Educational Theory ........................................................... 13
3.2.1 Lecture Based Learning ................................................................ 14 3.2.2 Project Based Learning ................................................................. 14 3.3.3 Student Directed Learning ............................................................. 14
3.3 Changes in the Architecture of Schools ............................................... 14 3.3.1 The Modern School ....................................................................... 15 3.3.2 The Montessori School .................................................................. 16 3.3.3 Learning Communities ................................................................... 16 3.3.4 The Virtual School ......................................................................... 18
Chapter 4: The Role of the Community ......................................................... 20 Chapter 5: A Systematic Approach ................................................................ 23
5.1 The Core and Academic Expansion ..................................................... 23 5.2 The Core .............................................................................................. 25 5.3 The System of Incremental Expansion ................................................ 27
5.3.1 Kit of Parts ..................................................................................... 28 Chapter 6: Reinterpreting the Functional Requirements ............................... 29
6.1 Typical Education Specifications .......................................................... 30 6.2 Permanent and Variable Program ........................................................ 32 6.3 The Core as a Community Center ....................................................... 34 6.4 Academic Expansion ........................................................................... 38
6.4.1 Early Learning Communities ......................................................... 39 6.4.2 Elementary Learning Communities ............................................... 40 6.4.3 Middle Learning Communities ....................................................... 41
Chapter 7: Case Study One_An Open Site .................................................. 43 7.1 Enrollment at West Education Campus................................................ 43 7.2 Climatic Considerations for Washington D.C. ...................................... 43 7.3 Site Analysis ........................................................................................ 46 7.4 Site Strategy ........................................................................................ 51 7.5 The Core as a Community Center ....................................................... 55 7.6 Learning Communities ......................................................................... 57 7.7 Adaptable Permanence........................................................................ 61
viii
Chapter 8: Case Study Two_An Existing School .......................................... 63 8.1 Enrollment at Truesdell Education Campus ......................................... 63 8.2 Climatic Considerations for Washington D.C. ...................................... 63 8.3 Site Analysis ........................................................................................ 63 8.4 Site Strategy ........................................................................................ 68
Chapter 9: Applying the Kit of Parts .............................................................. 73 9.1 Adjusting to Slope ................................................................................ 73 9.2 Variations of Exterior ............................................................................ 74 9.3 Contraction ........................................................................................... 75
Chapter 10: Conclusion ................................................................................ 77 10.1 Articulation of Permanent vs. Temporary Architecture ....................... 77 10.2 Scale of Learning Communities ......................................................... 77 10.3 The Civic Presence of the Core Building ............................................ 78 10.4 Figural Quality of Common Spaces ................................................... 78
This Table of Contents is automatically generated by MS Word, linked to the Heading formats used within the Chapter text.
ix
List of Figures
Figure 1: Graph of School Age Children Population Change .......................... 2 Figure 2: Early Exit Statistics ........................................................................... 2 Figure 3 Crow Island School by Perkins & Will partnered with Eliel and Eero
Saarinen. .................................................................................................. 6 Figure 4: Temporary Classroom Modules ....................................................... 8 Figure 5: The Factory Model.......................................................................... 16 Figure 6: Small Learning Community ............................................................ 17 Figure 7: Incremental Growth in Clusters ...................................................... 24 Figure 8: Incremental Expansion in a Linear Bar ........................................... 24 Figure 9: Sketch of Core Structural Concept ................................................. 26 Figure 10: Kit of Parts .................................................................................... 29 Figure 11: Pre-fabricated Learning Communities .......................................... 29 Figure 12: Program Analysis of Brightwood Educational Specification .......... 34 Figure 13: Library Program Diagram ............................................................. 34 Figure 14: Dining Program Diagram .............................................................. 35 Figure 15: Administration Program Diagram ................................................. 35 Figure 16: Health Program Diagram .............................................................. 36 Figure 17: Gym / Music Program Diagram .................................................... 37 Figure 18: Daycare Program Diagram ........................................................... 38 Figure 19 Early Learning Community Diagram .............................................. 40 Figure 20: Elementary / Middle Learning Community Diagram ..................... 41 Figure 21 Average Temperature for Washington D.C. .................................. 44 Figure 22: Average Rainfall for Washington D.C. .......................................... 45 Figure 23: Path of Sun for Washington D.C. ................................................. 45 Figure 24: Neighborhood Catchment Area for West Education Campus ....... 46 Figure 25: Existing West Site Plan and Section............................................. 47 Figure 26: Photographs of West Education Campus ..................................... 49 Figure 27: Photographs of Neighborhood ...................................................... 50 Figure 28: West Education Campus Site Plan ............................................... 52 Figure 29: Double-loaded “corridor” ............................................................... 53 Figure 30: Interior Courtyard.......................................................................... 53 Figure 31: Enclosed Courtyard ...................................................................... 53 Figure 32: Exploded Axon ............................................................................. 54 Figure 33: Proposed West Education Campus Plans .................................... 56 Figure 34: Section Perspective through community center ........................... 56 Figure 35: Exterior Perspective of Main Entrance ......................................... 57 Figure 36: Customization of Learning Communities ...................................... 59 Figure 37: Early learning community ............................................................. 60 Figure 38: Elementary learning community ................................................... 60 Figure 39: Perspective of early learning outdoor terrace ............................... 62 Figure 40: Sections and South Elevation ....................................................... 62 Figure 41: 1908 Building ................................................................................ 64 Figure 42: 1969 Addition ............................................................................... 65 Figure 43: Playground behind school ............................................................ 65
x
Figure 42: Neighborhood Catchment Area of Truesdell ................................ 66 Figure 43 Truesdell Existing Site Plan and Section ....................................... 67 Figure 44: Truesdell Proposed Site Plan ....................................................... 69 Figure 45: Replace 1969 building with learning communities ........................ 70 Figure 46: Replace 1969 building with linear learning community ................. 70 Figure 47: Keep both school buildings and add learning communities .......... 71 Figure 48: Proposed Site Section .................................................................. 71 Figure 49: Perspective showing expansion ................................................... 72 Figure 50: Detail Sketches ............................................................................ 73 Figure 51 Elevation Diagrams ....................................................................... 74 Figure 52: Elevations showing Cladding Options .......................................... 75
1
Chapter 1: Utilization of Space in Schools
“… a thing exclusively made for one purpose, suppresses the individual because it tells him exactly how it is to be used. If the object provokes a person to determine in what way he wants to use it, it will strengthen his self-identity. Merely the act of discovery elicits greater awareness. Therefore a form must be interpretable—in the sense it must be conditioned to play a changing role.”7 - Herman Hertzberger
1.1: Effect of Changing Enrollment
In the public education system, it is hard to limit, promote, or predict
enrollment from year to year.8 Between 2007-2010, decreased enrollment
and economic turmoil has forced cities to evaluate their inventory of schools
and utilization of space. As a result, schools have been closed in every major
U.S. city to consolidate and reallocate funding and resources. Specifically in
Washington D.C., many schools with under 51% enrollment have closed in
the last four years. Meanwhile, looking to the future, the NCEF (National
Clearinghouse for Educational Facilities) projects public schools, grades
kindergarten through eight, will see a 12% increase.9
7 Dudek, Mark. Architecture of Schools: The New Learning Environments. 5 8 DCPS Master Facilities Plan 2008, Data and Demographics, 1 9 www.ncef.org, data and statistics
2
Figure 1: Graph of School Age Children Population Change
Image is located in the DCPS Master Facilities Plan for 2008
Figure 2: Early Exit Statistics
Image is located in the DCPS Master Facilities Plan for 2008
Even though the population is increasing, many other factors
contribute to the unpredictability of enrollment. Specifically in Washington
D.C., about 14% of students exit early from their school. Sixty-seven percent
3
of those students transfer within the public school system.10 This is caused by
the parents desire to send their children to the best school in the system, and
the “No Child Left Behind” act provides this opportunity. Whether there is a
problem of over or under-enrollment, this inconsistency and inability to predict
changes from year to year puts stress on the system. When the enrollment is
above or below the intended size, the spaces in schools are not optimized,
often leading to undesirable learning and teaching conditions, as well as an
inefficient use of resources.
The goal of this thesis is to find a way to alleviate the stress of
fluctuating enrollment on the students and community by creating a school
that can support these constant changes.
1.1.1 Over-enrollment
When the enrollment is higher than the school’s capacity, there is a
need for the building to expand. Permanent additions are often added,
requiring design, planning, and construction, where construction is
limited to times when school is not in session. From design to
completion, these projects often take up to 3 years. Then, if the
enrollment changes dramatically, this permanent addition cannot
quickly readjust or respond.
10 DCPS Master Facilities Plan 2008, p. 17
4
1.1.2 Under-enrollment
When enrollment is below capacity, the building is under-utilized. As a
result, schools are closed and demolished or abandoned. In 2008
alone, the District of Columbia closed 23 schools due to under-
enrollment. When this occurs, resources are lost and people lose a
piece of their neighborhood infrastructure.
“DCPS enrollment has declined significantly over the past 10 years, leaving many buildings seriously underutilized. In 2007, the schools system has an average of 288 square feet per student across 145 schools. Analysis of enrollment decline revealed that 33 elementary schools has less than 272 students and had lost more than 21% of their enrollment in the past five years, leaving many of these buildings more than half-empty. Such inefficiency gradually left its toll on the school facilities as well; dollars spent on heating, cooling, and lighting unused sections of buildings were wasted, while at the same time there was not enough funding to maintain buildings at an adequate level”11
Not only are resources wasted with demolition, construction, or under-
utilized schools, but the students and their communities are also
affected by these conditions. According to the District of Colombia
Public Schools Facilities Plan, over 5,000 students and their families
have been affected by school closures within the 2008-2009 school
11 DCPS Master Plan 2008, 17
5
year.12 Not only is a school closure potentially damaging for the
students who rely on the school for their education and social growth
within a specific community, but schools are also a part of the
neighborhood’s infrastructure and an amenity for the community.
1.2 Permanent Solutions in Recent History
Since this issue of changing student population is not new, it is
relevant to recognize how the problem has been dealt with in the past. This
section focuses on the past century, since this is the period of time with the
most applicable technologies and educational strategies. The following
examples focus on infrastructural changes on a national level.
In the Early 20th Century, mass urbanization caused the population of
students in urban schools to grow. The concept of the Junior High School was
invented to alleviate overcrowding in elementary and high schools.13 This
involved moving students to new schools once they reached a certain grade.
Post World War II, standardized schools were mass-produced to deal
with the issue of over-crowding due to the Baby Boomer generation. An
Example of this prototypical school is Crow Island School in Winnekta, IL by
Perkins & Will in collaboration with Eero and Eliel Saarinen. This one story
school was built in 1940 where each classroom is individually accessed off a
12 DCPS Master Facilities Plan 2008, 14 13 Walden, Rotraut (ed.). Schools for the Future, pg. 24
6
common corridor, has access to light and air, and is scaled to the needs of a
child.
Figure 3 Crow Island School by Perkins & Will partnered with Eliel and Eero Saarinen.
The image was found at http://rogershepherd.com/WIW/solution5/images/plan
More recently, in the early 21st Century, low enrollment and budget
cuts caused mass consolidation of students in under-utilized schools filling
some schools and leaving others to be demolished or reused.
The previously listed changes have been widely controlled by the
government and policy, but individual public schools have also enacted
strategies to deal with the issue of space utilization. For over-enrollment, the
following strategies have been tested:
1. Lease space in another building
7
2. Create an additional class at a certain grade (limited to a bulk of
students in one grade and having the space to house this new class)
3. Build an addition which may take three years to complete
4. Limit enrollment by allowing students to attend other schools out of
their zone or by only allowing neighborhood students to attend.
For under-enrollment, the following strategies have been tested:
1. Close certain classrooms or wings of a building
2. Close and consolidate entire schools to increase building utilization
and move those students to other schools in the system. These
buildings may either be demolished or adaptively reused.
3. Rent un-utilized space in building to a different or similar user (must
consider security)
These solutions are used to re-structure the schools to allow them to adapt to
an increase or decrease in students. Section 1.3 will address solutions that
use pre-fabrication to allow for the building size to rapidly increase or
decrease.
1.3 Prefabricated Solutions in Recent History
The use of portable trailers is an inexpensive, fast, and popular way to
expand schools. In 2006, over 300,000 portable classrooms were used by
public school districts in the United States.14 These trailers are shipped to the
14 www.ncef.org; data and statistics
8
site, so they are restricted by their size. By putting two or three trailers
together, larger classrooms or multi-purpose spaces can be achieved. Due to
the maximum height for shipping, twelve feet, the design is limited. Aside from
the height, the trailers must be rigid for shipping, which often limits the
amount of openings and where they are located. This limits how the trailers
can address the climatic needs related to different exposures.
Figure 4: Temporary Classroom Modules
Portable trailers are often added to buildings that were not designed for
expansion. As a result, the site planning is often unthoughtful and the
circulation is usually exposed to the outdoors. Although it is nice for children
to have access to the outdoors, the circulation between classes should be
sheltered from the weather conditions. Since the cost of transporting a
portable trailer is not cheap, these trailers often stay at the school rather than
provide a temporary solution. Aesthetics become a major deterrent in making
9
these portable trailers permanent because they all look the same and have no
architectural interest.
10
Chapter 2: Exploring Opportunities of Prefabrication
“Prefabrication: some form of assembly occurs in one location because of some advantage or efficiency before being moved into its final location.”15
This chapter explores the benefits of combining off-site fabrication and
on-site fabrication to achieve a more optimal system than the modular
portable classroom. Anderson and Anderson flush out the benefits of different
pre-fabrication methods in their book Prefab Prototypes. The general
conclusion is that a panelized system is the easiest prefabrication method to
integrate into construction and fabrication.16 In this thesis, the idea behind a
panelized system is that by creating a kit of parts, there can be much more
variety in the product.
General benefits of a pre-fabricated kit of parts
1. rapid construction
2. Reduces excessive overages of materials from 10% to 2-5%
3. The panels can be recycled or reused
4. Uses less embodied energy than on-site fabrication
15 Anderson, Mark and Peter. Prefab Prototypes, 23 16 ibid p 24
11
There are many benefits to a prefabricated kit of parts solution over a
modular, shippable classroom.
1. Reduces the thermal envelope
2. Using shippable modules to create a learning community (like
those designed in this thesis) would take 14-15 trailers. This
would require intense seaming and water proofing
3. Using a panelized system would allow for each facade to be
treated differently to respond to the exposure
12
Chapter 3: Pedagogy, Technology, and Architecture of
Schools
There have been significant changes in pedagogy over the past
hundred years, but the ways schools are designed has remained relatively
constant. This segment of research focuses on the United States over the
past century because this is the most applicable to the thesis. The goal of this
section is to analyze the complex social, cultural, scientific, and technological
advances in the past hundred years to better understand how this has
influenced teaching methods. Then, the types of the spaces needed to
support a constantly changing educational model will be compared to the
types of spaces in use today. Ultimately, a designer cannot predict changes
that will occur and plan for them, but a flexible spatial arrangement that
supports a variety of teaching modalities can more successfully absorb the
changes.
3.1 Changes in Technology
The computer is the main technological change that has occurred in
recent history. Since then, computer labs have been proposed for every
school. As computer technology continues to change, it is becoming more
popular for students to have their own laptop. Obviously this is not the case
among all demographics, but even if the students do not have their own
13
computers, many schools are finding that laptops can assist teachers and
students in each classroom. As a result, computer labs may become less
important. This thesis proposes it is important for learning space to be
independent of any specific technology. Instead, the spaces should be though
of as a platform where the technology can be constantly changing.
Along with computers comes the Internet. Information is more readily
available through the Internet causing the library or media center unable to
keep up-to-date books. The idea that the library is the only place for
information is already outdated, and it is possible that a database can supply
the same information to all public schools through the Internet. There may be
a need for a media center now, but if it is thought of as a flexible space, then
it can be converted to another use. Another effect of the Internet is social
media as an increasing form of networking and interaction. This can be both
positive and negative for young children. It is important that students always
have places to encourage social interaction.
3.2 Changes in Educational Theory
Traditionally, learning happened in a linear way, from teacher to student.
Further research on how students learn and how to prepare children for
today’s world has led to advances in educational theory. Here is a quick
overview of some of the pedagogical changes that should affect the way
learning spaces are designed.
14
3.2.1 Lecture Based Learning
This traditional method of teaching involves the linear transfer of
knowledge from teacher to student. Students need to be facing the
teacher, who is most often in the front of the room. This method as
been manifest in the modern school design discussed in section 3.3.1.
3.2.2 Project Based Learning
This method of teaching gives students the opportunity to work
together in groups to complete projects. The idea is that the student
learns through the process of making or creating. This usually requires
more space with movable furniture.
3.3.3 Student Directed Learning
Theorists like Reggio Emilia or Maria Montessouri theorized this
method of teaching where the student becomes the facilitator. In some
cases, each student requires their own desk.
3.3 Changes in the Architecture of Schools
“The Information Age has seen new innovations in educational architecture, although many school boards continue to miss opportunities to create better school facilities as they struggle to cope with ever increasing enrollments”17
17 Walden, 25
15
This section will discuss architectural solutions to the previous teaching
methods. Some strategies are more limiting in how the space can be used
and the learning modalities it supports. These strategies are not necessarily
in chronological order, as they did not happen in a linear fashion.
3.3.1 The Modern School
The Modern School18 is usually associated with traditional classrooms
located off a corridor. This configuration is referred to as “cells and
bells” because there is a strict schedule that is necessary to make
these spaces function. It is also referred to as the “ford model” alluding
to the treatment of students along an educational assembly line. The
cellular arrangement of rooms made for efficient, inexpensive
buildings. Since the classrooms are all separate, and usually designed
with lecture based learning in mind, there is less flexibility. In addition,
space for chance social encounters is not emphasized.
18 Walden, 25
16
Figure 5: The Factory Model
Located in Taylor, Anne. Linking Architecture and Education: Sustainable Design of Learning Environments. University of New Mexico Press, Albuquerque, NM; 2009, pg 10
3.3.2 The Montessori School
This often consisted of open classrooms to support a variety of
different learning modalities. Students are often more self-directed and
independent since there is less structure to the schedule.
3.3.3 Learning Communities
Learning communities are often also referred to as “houses.” Grouping
100-120 students into a “house” creates a sense of community within
17
the larger school. Most everything the student needs is within their
“house”. Research has been done to prove the success of smaller
schools in the development of children.19 In terms of accommodating
students, learning communities would allow for a change of twenty or
so students to go relatively unnoticed.
Figure 6: Small Learning Community
Found in Nair, Prakash, Randall Fielding, Jeffery Lackney. The Language of School Design: Design Patterns for 21st Century Schools. Revised Edition. National Clearinghouse for Educational Facilities, 2009, pg 34
19 Nathan, Joe and Sheena Thao. Smaller, Safer, Saner, Successful Schools. National Clearinghouse for Educational Facilities, Washington DC; 2007, pg 11 http://www.ncef.org/pubs/saneschools.pdf
18
3.3.4 The Virtual School
The virtual schools gives students the ability to access a large variety
of information from where ever they are. This allows for students to
have access to the best sources of information from anywhere. An
example of this is The School of One, which was implemented in New
York City for a summer program. Allowing each student to have their
individualized lesson plan for each day, students can work in groups at
same level or on their own at their own pace.
When studying these experimentations and standardizations over the
past century, it is evident there is a struggle to define how the school supports
learning. Should the school be a rigidly ordered place of discipline and control
or a place that encourages individual creativity? As a result of this duality, the
architectural development of schools is not a linear progression and has not
universally improved over time. This thesis looks to find ways that space can
be designed to support a variety of learning modalities, absorb new uses, and
foster discipline. This utilization of space is widely missing from school design
today.
When considering what makes a desirable school, it is worth noting
that schools built one hundred years ago are more often kept than schools
built fifty years ago. The older buildings were designed without ventilation and
cooling technology and therefore have tall windows to maximize light and air.
19
However, these buildings are usually organized with classrooms on either
side of a double loaded corridor. This strategy rarely creates communal
spaces for gathering, besides in the corridors, but rather reinforces a factory
method of learning and is limited in the opportunities for new methods of
teaching to be tested. Mid century, the same organizational strategies are
used, but the windows are smaller because views to the outdoors was
thought to be a distraction to students and the need for natural ventilation was
negated by air conditioning. Studies have since reported that direct sunlight
improves the productivity of students.20 Designers often find opportunities to
reuse older, early twentieth century buildings, but find the mid-century
buildings to be spatially and experientially undesirable. Existing buildings
should be analyzed to determine whether or not they should be kept.
There are many contemporary schools that experiment with ways to
create spaces that support a variety of learning modalities. This is desirable to
educators because they are no longer limited to a linear, lecture based
learning method, but can more creatively utilize the learning spaces. The
spaces that allow for this to occur while avoiding completely open plans, with
no delineation of space, are desirable when thinking about flexible spaces.
The thesis explores how flexible spaces within learning communities absorb
small changes in enrollment size and allow for a variety of ways they can be
used.
20 Daylight, View, and School and Office Work Performance. Lawrence Berkeley National Laboratory, Berkeley, CA; 2009 http://www.iaqscience.lbl.gov/performance-daylight.html
20
Chapter 4: The Role of the Community
“Today, the need to provide school buildings no longer revolves purely around school-age population growth and decline; to be viable community facilities, schools must be designed and built to tie directly into the needs and desires of the communities that they serve, both programmatically and physically, in their scale and their symbolic potential to give identity and purpose to the surrounding community.”21
Since the school is a place of interaction between students, parents,
and teachers, it has a specific role within the community. The level of
involvement between a school and the community is more important to some
cities than others. Although the goal of the thesis is not to prove or disprove
the importance of community involvement, the discussion is important when
thinking about the school as a community center, which is discussed later in
the document.
Ideally, urban schools should be central to a neighborhood or district
for the convenience of the attending students, though this is not always the
case. This allows any community amenities housed in the school to also be
centrally located and accessible. Not only are the students attending classes
during the day, there are often after school recreational activities, PTA
meetings, and other activities that activate the school after hours. 21 Haar, Sharon. Mark Robbins, Mayors’ Institute on City Design. Schools for Cities: Urban Strategies. Princeton Architectural Press, New York, New York; 2002. Pg. 7-8
21
Communities often look to schools as places that can support such activities,
making them integral to the infrastructure within a community. School
buildings are where students are educated, become social beings, and begin
form a community of their own.
As previously stated, many schools across the country are being
closed and consolidated. Students from these schools are forced to switch to
a new school, potentially in a different neighborhood within another
community. This removes a child from their community inside and outside the
school walls, which has supported their social growth. In addition, when a
school is closed, this takes away the amenities and infrastructure from the
community. If the school is seen as a community asset, which it is in
Washington D.C.,22 closing a school has repercussions in the community.
The school community also benefits greatly from the community in
which it exists. Community involvement offers many opportunities to improve
and enhance the education of the students. By overlapping student and
community learning both spatially and temporally, there is a constant
exchange between the school and outside community. As society and culture
change, the knowledge and technologies within the community will permeate
the school, and vice versa. The school is directly involved in the community
rather than a microcosm of it.
The needs of the community, as well as those of the school, should be
taken into consideration when programming a school. For the school to be
22 DCPS Master Facilities Plan 2010. Priorities, Objectives, and Defining Modernization, 5-6
22
culturally sustainable and relevant in the future, it must have amenities that
stimulate the growth and wellbeing of the community in which it exists. In the
first case study, there will be a further analysis of what a community in D.C.
needs and whether or not it is reasonable for the school to house this
amenity.
23
Chapter 5: A Systematic Approach
DCPS uses the term “right sizing” as their strategy for tackling the issue of
space utilization in schools. This thesis presents a solution where the
architecture can adapt to create a school that can quickly become the “right
size.” To achieve this, adaptability and flexibility are critical throughout the
design.
5.1 The Core and Academic Expansion
This approach uses the rapid construction of a pre-fabricated kit of parts and
the value of a more permanent piece of community infrastructure to create a
school that can withstand the test of time. The first diagram shows learning
communities that are incrementally added to the core to expand the school.
This is the method that is tested in Chapter 7.
24
Figure 7: Incremental Growth in Clusters
The second diagram shows how the same idea of a learning community can
expand in a linear bar. This method is tested in Chapter 8.
Figure 8: Incremental Expansion in a Linear Bar
25
5.2 The Core
The “core” refers to the more permanent school building. The building
can either be an existing building or new construction. If it is an existing
building, the site analysis will provide opportunities for how this building can
be systematically expanded. The thesis is tested on an existing school in
Chapter 8. Given an open site, which is tested in Chapter 7, the core should
be thought of as a community center in terms of its programming and public
presence. A designer is commissioned to design the core building in a
manner that prepares to apply the pre-determined system of academic
expansion. The following section explains how the core should be conceived
of given an open site.
The design of the core building should address both the needs of the
school, and the needs of a community building. As discussed in Chapter 1,
when a school reaches a low enough enrollment size, it is often demolished
or left abandoned. By creating a permanent civic building, the building can
function with or without an academic component. The following list identifies
design principals that any designer of the core building should follow.
A. The structure should be designed to allow for flexibility and adaptability in
the future. If the walls are independent from the structural grid, spaces can be
redefined if needed. Below is a diagram that shows how the grid is consistent,
but there are hierarchal long-span spaces can create larger spaces.
26
Figure 9: Sketch of Core Structural Concept
B. For a successful school or community center, there needs to be a
hierarchal main space that can serve as the heart of the building.
C. The architectural definition of the exterior must have a public presence so
the building becomes meaningful and valuable to the people in the
community.
D. The building must function as a community center, independent from the
academic program. The designer must consider security as the primary
reason why schools are not normally open to the public.
27
5.3 The System of Incremental Expansion
Although the core varies from project to project, the pre-fabricated system of
academic expansion is clearly defined. With that said, the variation within the
system provides opportunities to allow for different spatial configurations, treat
the envelope differently depending on the exposure, and provide a variety of
cladding options. These variations are established in the “kit of parts” defined
in the next section. First, it is important to explain some of the design
principles that guide the use of this kit of parts.
A. The system is used to create learning communities. This allows for the
school to incrementally expand by clusters of learning spaces,
accommodating up to 120 students, rather than by one classroom. The
programmatic suggestions for these learning communities are discussed in
Chapter 6.
B. Each learning community is structurally and mechanically independent
from the core. This allows for the rapid construction and deconstruction of
learning communities.
C. The structure should tread lighting on the earth. Foundations should be
considered that are not permanent.
28
D. The character of the learning communities can and should be strategic and
the cladding should be chosen to represent each school. The intention is not
to have all the learning communities at one school be different, but rather,
each school should be cohesive in its entirety.
5.3.1 Kit of Parts
The following image shows the kit of parts product list. By working
within the system, each school should be able to customize their
learning communities to meet the needs of their school while still
respecting the aforementioned design intentions.
30
Chapter 6: Reinterpreting the Functional Requirements
“Architects must learn how to invent flexibly scaled teaching and learning spaces to respond to needs for collaborative, team, and individual study areas for children of different ages and levels of learning”23
6.1 Typical Education Specifications
By analyzing these specifications, there will be many opportunities to
rethink the ways these spaces can support flexibility. Through the analysis the
thesis will show that the current educational specifications do not allow for
flexibility that will support the aforementioned changes in pedagogy,
technology, economy, society, etc and therefore should be rethought. While
generally working within the parameters of the specifications, a new program
will be derived to support the thesis.
The programmatic information analyzed below is taken from the 2009
Bruce-Monroe PK-8 School Educational Specifications.
This is a program for approximately 600 students in grades PK-8.
Building Program: 24
Core Academic/Special Education Area: 37,125 sf
23 “Something from ‘Nothing’: Information Infrastructure in School Design, Haar p. 50 24 Educational Specification for Bruce Monroe PK-8 School, Drafts, September 2009
31
Pre-K : 4 Classrooms @ 1,175 sf each, includes WC and
storage
Kindergarten: 3 Classrooms @ 1,175 sf each, includes WC and
stor.
Grades 1-5 : 3 classrooms per grade @ 900sf each
Grade 6-8 : 7 classrooms @ 850 sf each
Science Lab (Middle) : 2 @ 1300 sf each w/ prep areas
Resource Room (Elem) : 2 @ 400sf each
Resource Room (Middle) : 1 @ 800 sf
Student Services Offices : 4 @ 150sf each
Speech Room : 1 @ 300 s.f.
Special Needs Classroom : 2 @ 900 sf each
Special Education Suite :
Offices : 1 @ 150 sf
Small Group Area : 1 @ 200 sf
Occupational Therapy / Physical Therapy_ 1 @ 400 sf
ESOL / Bilingual Education : 2 @ 900 sf w/ support space
Storage : 3 @ 400 sf
Workroom / Teacher Office : 2 @ 400sf
Media Center: 3,600 sf
Visual Art and Music: 3,400sf
Physical Education/ Gym: 10,400 sf
Administration: 3,915sf
32
Student Dining & Food Service: 5,425sf
Maintenance & Custodial Services: 800sf
Mechanical, Electrical, Toilets, Custodial Closets: 24, 466 sf
Total Net Square Footage: 89,131 sf
Total Gross Square Footage: 96,975 sf
Exterior Spaces:
Multipurpose Grassy Play Field- soccer / softball—may be off-site
Structured Play Area For Primary Grades
Structured Play Area for Intermediate Grades
Protected Pre-School Play Area
Outdoor Paved Play Area [full basketball court, with markings for
games]
Faculty, Staff, and Visitor Parking
Other potential additions to the building program that would be community
assets:
Student-based health clinic
Adult and Post Secondary Learning Facilities
Day Care Facilities
6.2 Permanent and Variable Program
33
In order to test the systematic approach discussed in Chapter 4, the
program must be separated into permanent and variable program.
The permanent program is that which belongs in the community center
because it is used by, but is independent of, the student population. In other
words, the community demands these programs even when there is no
academic component. The variable program will be strategically grouped to
allow for incremental expansion and contraction, depending on the enrollment
size. In the following diagram, the permanent program is shown as solid while
the variable program is wire-framed. This shows how the permanent program
can be grouped together while the variable program is group together in
clusters of spaces, creating learning communities.
34
Figure 12: Program Analysis of Brightwood Educational Specification
6.3 The Core as a Community Center
In order for the core to act as a community center, the permanent program, as
defined in the educational specifications, will need to be reworked.
Library
The library can be thought of as a information commons (a place where
people go to exchange information), a support room (could be stacks now,
but also wired to support computers if need as computer room or platform for
new technology), and small group rooms (for students to work more quietly or
meeting to occur).
Figure 13: Library Program Diagram
Dining Area
The dining area does not need to be an enclosed room, although it could be.
Either way, it should be though of as a multipurpose room that can be
35
serviced directly by the kitchen. There is an opportunity for the dining area to
become a more centralized space that is programmed for dining, but can
become a larger gathering space for the public.
Figure 14: Dining Program Diagram
Administration
The welcome center component should be readily accessible from the
entrance, and should ideal have a visual connection to the academic
component. The administrative offices should be placed at the joint between
the community center and the academic expansion with visibility to both.
Figure 15: Administration Program Diagram
36
Student Health
The student health clinic is a place where students can go during the day if
they do not feel well at school. It should be accessible from the academic
spaces as well as the administration, gym, and public health center.
Figure 16: Health Program Diagram
Public Health
The public health is an added program, not included in a typical educational
specification. This piece is added as an extension of the student health
component and provides another service to the community. Many families of
public school children may not have the best access to quality health care,
and this could be a way to serve the families of the children, thereby providing
the children with a healthy home life.
37
Gymnasium / Music
The music room / stage is considered permanent because there will always
be a need for this program. There are many after-school programs that
integrate music and it should be accessible for the public. The stage should
be directly linked to either the dining/ multipurpose area or the gym to allow
for that space to double as an auditorium.
Figure 17: Gym / Music Program Diagram
Pre-kindergarten Classrooms
38
These classrooms are not grouped with the other academic functions. This is
mainly because there is usually a need for day-care in a community center,
so these classrooms can be considered permanent.
Figure 18: Daycare Program Diagram
When testing the thesis on an open site, the community center building
incorporates these ideas.
6.4 Academic Expansion
The variable program is housed in academic expansion. The strategy
is unlike the current portable trailers, because the school will not expand in
modules of one classroom. Instead, the learning communities will each house
120 students and will be created using the kit of parts. In chapter three, the
success of these learning communities was discussed.
39
Since PK-8 students are at all levels of development, there are some
functional considerations that vary between the younger children and the
oldest.
6.4.1 Early Learning Communities
Students in pre-kindergarten until first grade would attend these
learning communities. Since the students are more dependent, they
spend most of their day in one classroom, including mealtime. The
students may also occasionally come together to eat in the common
space. Since the meals occur within the community, there is a need for
a warming kitchen. This would be serviced by the main kitchen, but
would allow for the lunches to be prepared in the learning community.
The common space should provide students with a physical and visual
connection outdoors. The classrooms are large (1,175 square feet)
and each has their own restroom and storage closet. A few small
group rooms that are accessible from the commons provide spaces
where teachers can meet with students or other teachers in private.
40
Figure 19 Early Learning Community Diagram
6.4.2 Elementary Learning Communities
Students in first through fifth grades would be attending these learning
communities. The students are more independent, and most likely
have a schedule that requires them to visit different classrooms,
including labs or art rooms. There is still need for constant supervision.
Since the students may have a rotating schedule, it is likely that the
teachers will as well. As a result, there is a need for a faculty
collaboration room within the community where the teachers can keep
their belongings and have a desk. This should have a visual
connection to the common space so the students can be watched even
during their free time.
41
The common space will start to be used as a project area or larger
gathering space. Students could also eat in this space if needed, but
their primary space for meals is the all-school dining area. As a result,
there is not a need for the warming kitchen. The common space should
provide students with a physical and visual connection outdoors. A few
small group rooms that are accessible from the commons provide
spaces where teachers can meet with students one-on-one and small
group work between students can occur.
Figure 20: Elementary / Middle Learning Community Diagram
6.4.3 Middle Learning Communities
The spatial configuration of the middle learning community is the same
as the elementary learning community. That said, there are some
42
differences in the way they use the space. The oldest children may use
the commons as a place to do independent work or project based
work. Study carrels or other furniture can start to provide places where
students can look up something online for a research paper while
his/her classmates are working on a group project at the next table.
The goal for the academic expansion is to create learning communities using
the kit of parts discussed in Chapter 5: A Systematic Approach.
43
Chapter 7: Case Study One_An Open Site
The following case study will test the thesis on the now open site of West
Education Campus.
7.1 Enrollment at West Education Campus
The following chart examines enrollment variation. The maximum
enrollment capacity at West is now 280 students and is projected in increase
to 450 students after pending modernization in 2011.
Year ’02-‘03 ’07-‘08 ’09-‘10
Enrollment 309 students 190 students 265 students
Building
Enrollment
110% 68% 95%
The enrollment at West has fluctuated over the past eight years, leading to
the building utilization ranging from 68% to 110% of its capacity. West is
located in the center of its residential neighborhood, but only fifty-one percent
of students are coming from within boundaries.
7.2 Climatic Considerations for Washington D.C.
The following diagrams show the climatic considerations in Washington D.C.
and are relevant to both sites.
44
Figure 21 Average Temperature for Washington D.C.
Data found on www.weather.com
The averages over the year vary significantly causing temperatures to range
from below freezing to the high eighties. The seasons cause uncomfortable
weather for most months of the year, making natural ventilation a secondary
means of airflow.
45
Figure 22: Average Rainfall for Washington D.C.
Data found on www.weather.com
The rainfall over the year is consistent. There is potential to collect and
recycle rainwater.
Figure 23: Path of Sun for Washington D.C.
Image found on http://www.gaisma.com/en/location/washington-district-of-columbia
The sun angle is greater in the summer causing less sun to enter the building.
During the winter, the building can use sunshades or louvers to block light or
allow it into the building. The western light is severe and direct exposure
should be avoided. As previously cited, studies have shown that children
perform better when exposed to natural daylight.
46
7.3 Site Analysis
Currently, there is an existing school on the site, but this thesis
assumes it needs to be rebuilt. The site is located in a residential
neighborhood in northwest Washington D.C. It is central to its neighborhood
(see figure 24: the red region shows West), so students will be entering the
site from all directions. It is between Fourteenth Street and Georgia Ave, both
of which are commercial throughways connecting the neighborhood to
downtown Washington.
Figure 24: Neighborhood Catchment Area for West Education Campus
47
The topography on the site is severe with a 20-foot drop from the
northwest to the southeast corner. This provides the opportunity to test how
the pre-fabricated expansion can be site specific and address a change in
grade as an opportunity, rather then leveling the earth and making the site
flat.
Figure 25: Existing West Site Plan and Section
48
There are no major community centers in the area, so this is a prime
example of using the school as a way to connect the neighborhood. There is
a private school across the street, as well as a few churches nearby, but the
site is primarily residential (see photographs below).
51
7.4 Site Strategy
In designing the site and landscape of the school, it is important to consider
where the expansion will occur. As discussed in Chapter 1, the current
portable trailers are placed anywhere on a site with no enclosed circulation.
Knowing where the school will expand presents opportunities in the site
planning. The diagram below shows the site at capacity with five learning
communities, accommodating up to 640 schools. This number is the
maximum amount because community center amenities are designed for a
600-student school and this is above the D.C. average. Below the full site
plan is a series of diagrams that show how the school expands. The amount
of students each phase is able to accommodate is written below the diagram.
The intention is for the site to accommodate anywhere between zero and five
learning communities with little affect on the landscape.
52
Figure 28: West Education Campus Site Plan
Although this configuration proved to be the most successful on the site, the
following sketches show a variety ways the learning communities can
aggregate on the site.
54
The following diagram shows how the kit of parts is used to create these
learning communities on the site.
Figure 32: Exploded Axon
55
7.5 The Core as a Community Center
Given the open site, the core is designed to act as a community center
independent from the academic functions. Refer to Chapters 1, 5, and 6 to
better understand the intention behind this idea.
The Core building is dropped below the level of Fourteenth Street to allow for
the public to enter off the quieter Farragut Street. The program is arranged
with the gym, welcome center, music / stage, pre-kindergarten, and student
health on the ground floor, all accessible from the main central space. On the
second floor is the dining area, library, administration, public health clinic, and
several public classrooms. Lowering the building below grade allowed the
public health clinic to have a private entrance from the West. In the plans
below, the shades of gray represent the permanent program.
56
Figure 33: Proposed West Education Campus Plans
Figure 34: Section Perspective through community center
57
The above section shows the entrance, main central space and the gym. On
entry, the visitor has a visual connection to the gym and quickly understands
the building.
In order to the core to act as a community center, it needs to have a civic
presence.
Figure 35: Exterior Perspective of Main Entrance
7.6 Learning Communities
The learning communities are made using the kit of parts defined in Chapter
5. The intention is for the students to spend most of their days in the learning
community. As they get older they have more independence within the
community and the rest of the school. The learning communities have
differing requirements depending on the age of the students inside (as outline
58
in Chapter 6). Since this can vary depending on the amount of students in the
school, this customization is mainly addressed in furniture.
60
This is an example of an early learning community.
Figure 37: Early learning community
This is an example of an elementary learning community.
Figure 38: Elementary learning community
61
7.7 Adaptable Permanence
The relationship between the permanent building and the academic
expansion can be addressed in a few ways. To a certain extent, the
construction of the two has similarities. In this example, the permanent
building is articulated as more solid, using masonry cladding and a heavy
base, with concrete protrusions giving a playful variation to the façade. The
learning communities are a terra cotta rainscreen that varies in its texture to
give verticality to an otherwise horizontal composition.
63
Chapter 8: Case Study Two_An Existing School The following case study will test the thesis on the site of Truesdell Education
Campus.
8.1 Enrollment at Truesdell Education Campus
The following chart examines enrollment variation. The maximum enrollment
capacity is now 471 students and is projected in decrease to 450 students
after pending modernization.
’02-‘03 ’07-‘08 ’09-‘10
Enrollment 477 students 286 students 423 students
Building
Utilization
101% 60% 90%
As seen, the enrollment at Truesdell has fluctuated over the past eight years,
leading to the building utilization ranging from 60% to 101% of its capacity.
Truesdell is located in the center of a residential neighborhood where
seventy-nine percent of students are coming from within these boundaries.
8.2 Climatic Considerations for Washington D.C.
Same data as section 6.1.
8.3 Site Analysis
The 69,600 square foot school is comprised of two buildings. The first
was built in 1908, and the second was added in 1967. The only way to get
64
from one building to the other is at the ground floor, causing disconnect
between the upper levels. The buildings are scheduled for “modernization” in
2010. These adjustments are mostly interior, but also change the entrance
and look to connect the two buildings on multiple floors. In this plan, both
building are to be kept.
Figure 41: 1908 Building
66
The thesis assumes that the existing school on the site needs to be
expanded. The site is located in a residential neighborhood in northwest
Washington D.C. a few blocks from West Education Campus. Like West, it is
central to its neighborhood (see figure 42: the blue region shows Truesdell),
so students will be entering the site from all directions.
Figure 44: Neighborhood Catchment Area of Truesdell
68
The topography on the site is severe as there is a 20-foot drop from
the north to the south. The existing school has level mostly leveled this
topography change. The main goal is to see how the learning communities
can be added to an existing school and adapt to the height of its floor and the
topography on the site.
8.4 Site Strategy
The strategy is to use the same system propsed in the thesis to expand from
an existing school. Instead of expanding in the same way, the case study
illustrates how the kit of parts can be used to expand linearly. The same
principles of a learning community remain true, but the spaces are configured
in a bar rather than clusters.
69
Figure 46: Truesdell Proposed Site Plan
Although this site strategy was used, many other configurations were
explored. The following sketches show a variety of ways the school could
expand.
70
Figure 47: Replace 1969 building with learning communities
Figure 48: Replace 1969 building with linear learning community
71
Figure 49: Keep both school buildings and add learning communities
The joint between the two existing buildings is one story, but further
examination is needed to show how the levels between all three buildings
could be mediated in this joint.
Figure 50: Proposed Site Section
72
Figure 51: Perspective showing expansion
Note the difference in cladding between this expansion and the expansion at
West Education Campus. The next chapter will explore these variations in
more detail.
73
Chapter 9: Applying the Kit of Parts
Chapters 7 and 8 have explored ways to use the kit of parts can be used to
make learning communities that can be added to a new or existing school.
This chapter explores how the system works in greater detail.
9.1 Adjusting to Slope
The following sketches show how the corridor can be designed to include a
ramp and allow the learning communities to step down or up with the existing
topography. The ramp occurs next to a longer wall, and therefore it limited to
a 30” drop per learning community.
Figure 52: Detail Sketches
74
9.2 Variations of Exterior
One major issue with modular construction is that each module is often
the same. One of the advantages of the kit of parts method of pre-fabricated
construction is the ability to customize. This means that the amount of
openings on the façade can vary depending on the exposure. These
diagrams should how the same façade can be creatively altered to have more
or less exposure to light.
Figure 53 Elevation Diagrams
Additionally, the cladding can vary as well. As seen in the two case studies,
the cladding, and therefore character, of the learning communities was
75
different on each site. The intention of the thesis is not to make all the
learning communities look the same and be recognizable around the city.
Instead, it provides a way that schools can quickly expand, but still keep their
own identity or create a new image for themselves.
Figure 54: Elevations showing Cladding Options
9.3 Contraction
The idea of expansion was explored in great detail, but the idea of
contraction is also important to this thesis. The project started with the
premise that these learning communities could expand and contract
depending on the enrollment. When the learning communities are taken
away, the community center building is able to independently contribute to the
neighborhood and city.
The research generally found that even portable classrooms, which are
thought to be the easiest structure to remove from a site, are often left at
76
schools for longer than expected. Although the likelihood that these learning
communities would be deconstructed instead of left unoccupied is unlikely,
there are still qualities of the system that make it possible. First, each learning
community is structurally and mechanically independent. In addition, all the
pieces are pre-fabricated and panelized, and then added to a steel frame. In
theory, these pieces could be deconstructed, almost as easy as they were
constructed, and recycled or reused. If the decision is made to leave a
learning community unoccupied, the mechanical systems can be shut off so
no resources are wasted.
77
Chapter 10: Conclusion The public review of the work was held on Dec 1, 2010 at the School of
Architecture, Planning, and Preservation.
The following sections address the comments that were made.
10.1 Articulation of Permanent vs. Temporary Architecture
Should this be expressed in the façade of the building? Two opposite
approaches come to mind. One option is for the core and the incremental
expansion to have a similar language. Even though the methods of
construction are different, there can still be a similar palette used in each. The
other approach is to contrast the two and accentuate the differences between
the methods of construction. I did not fully commit to one or the other. In the
end, the buildings were meant to match in language/color but not in the
material. There may be an issue with how the different materials show their
age.
10.2 Scale of Learning Communities
The pre-fabricated nature of the project makes it more difficult to have more
formal variety. When developing the kit of parts further, the integration of a
truss might help to give more options for the roof.
78
10.3 The Civic Presence of the Core Building
The exterior of the building should be civic, so that it can stand alone as a
community center, and represent the institution of school. There were
comments on how the building did not seem civic, but it did seem institutional.
The question of what makes a building civic has been a constant discussion
throughout the whole thesis. Some ideas of how to make the building civic
are:
a. Grand and welcoming architectural definition of entrance—
including signage
b. Entry plaza that creates a place for people to gather outside the
building
c. Large transparent area that allows a visitor to view the interior
space from the exterior
d. Accentuate how the building meets the ground and sky
At the same time, I wanted the building to read as a school so the façade is
more playful and whimsy then a “civic” building.
10.4 Figural Quality of Common Spaces
“There is a lack of figural space that makes the common spaces seem
residual” – Frank Durken
“I think it’s less residual and more organic” – Coke Florence
79
The following diagrams show how these spaces can be broken into activity
zones that allow for a variety of different learning modalities to take place.
One concern is that there are not as many “nook and crannies” where
students can work individually. Since there are small group rooms, there
would be places for teachers to pull aside one or two students or for students
to work independently.
The main goal of the thesis was to find a way to create a school that is
both adaptable and flexible. At one point this meant the school was a
permanent building where this flexibility occurs within the walls and another it
was a completely pre-fabricated solution. In the end came a hybrid, a school
that could both adapt or change size and have a permanent presence in the
city. The outcome was a community center where academic functions can be
systematically added or subtracted. Exploring architecture as simultaneously
permanent and variable is an issue that designers face in a rapidly changing
world.
80
Bibliography
Anderson, Mark and Peter Anderson. Prefab Prototypes. Princeton
Architectural Press, New York; 2007
Daylight, View, and School and Office Work Performance. Lawrence Berkeley
National Laboratory, Berkeley, CA; 2009
http://www.iaqscience.lbl.gov/performance-daylight.html
District of Colombia Public Schools Master Facilities Plan 2008.
www.k12.dc.us
District of Colombia Public Schools Master Facilities Plan 2010.
www.k12.dc.us
Dudek, Mark. Architecture of Schools: The New Learning Environment. The
Architectural Press, Woburn, Massachusetts. 2000
District of Colombia Public Schools: Educational Specifications, Brightwood
Elementary School: Executive Summary; 2001
District of Colombia Public Schools: Educational Specifications, Bruce-
Monroe Elementary School: Draft; 2009
81
Haar, Sharon. Mark Robbins, Mayors’ Institute on City Design. Schools for
Cities: Urban Strategies. Princeton Architectural Press, New
York, New York; 2002
Kurz, Daniel, and Alan Wakefield (ed.). Schools Buildings. The State of
Affairs: The Swiss Contribution in an International Context. Birkhauser—
Publishers for Architecture, Basel; 2004
Nair, Prakash, Randall Fielding, Jeffery Lackney. The Language of School
Design: Design Patterns for 21st Century Schools. Revised Edition.
National Clearinghouse for Educational Facilities, 2009
National Clearinghouse for Educational Facilities at the National Institute of
Building Sciences; 2010. www.ncef.org
Nathan, Joe and Sheena Thao. Smaller, Safer, Saner, Successful Schools.
National Clearninghouse for Educational Facilities, Washington DC; 2007
http://www.ncef.org/pubs/saneschools.pdf
Pink, Daniel H. A Whole New Mind: Why Right-Brainers Will Rule to Future.
The Penguin Group, New York, New York; 2005,2006.
82
Robinson, Ken. Out of Our Minds. Capstone Publishing Limited, Oxford; 2001
Taylor, Anne. Linking Architecture and Education: Sustainable Design of
Learning Environments. University of New Mexico Press, Albuquerque,
NM; 2009
Walden, Rotraut (ed.). Schools for the Future: Design Proposals from
Architectural Psychology. Hogrefe & Huber Publishers, Cambridge
Massachusetts; 2009.